Where is the diameter in the Word. Various ways to insert a diameter icon in Windows applications.

Not all characters are placed on the keyboard. There is no diameter icon on it. But this does not mean that it can not be inserted into most modern applications. There is such an opportunity. Moreover, this operation can be done completely different ways. The most universal among them is the use of ASCII codes. The second method is tied to the Microsoft office suite and works only in it. The latter method is associated with. To implement it, you need the original diameter icon, which will then be added to the new application by copying and pasting. Each method will be discussed in detail in this article.

When does this need arise?

There are many cases in which the need arises to insert the “Ø” sign in. For example, it may be necessary when drawing drawings, making price lists, creating advertising bouquets or explanatory notes on pipe products or valves. This list can be continued further, but it is clear that, although not so often,
insert a diameter into the electronic document sometimes have to.

Using codes

The most universal method is based on the use of ASCII codes. It is implemented by the capabilities of the operating room itself. windows systemstherefore it is not tied to any one, strictly specific application. First you need to remember special code - “0216”, which in the ASCII code table corresponds to “Ø”. And the order of entry in this case is as follows:

Change the input language until “En” (“English”) appears. If this is not done, then “Ø” will be entered instead of “Ø”.
Next, turn on the digital enhanced keyboard. On its inclusion signals the LED "Num Lock". If it burns, then nothing needs to be done.
Then go to the workspace of our application, if it is minimized. To do this, just click on it in the taskbar. Then we direct the pointer of the manipulator on its working area and we make one click with the left button. At the same time, the cursor should blink in it.
In the next step, we hold down the “Alt” key (no matter which side, on the left or on the right). Then, without releasing it, successively on the right numeric keypad, type "0-2-1-6". Completely remove the hands from and after that the diameter icon should appear.

The main advantage of this method is universality. He works in most modern programs. There is no need to look for the source symbol. The minus of the similar decision consists that it is necessary to remember the code. If you only need this one icon, then there is no problem. Worse, if there are several. In this case, it is better to print the code table of the most frequently used symbols on a sheet of paper and periodically apply it.

Word and other office applications

Alternative input method "Ø" is tied to a specific group of software products. This is an office suite of Microsoft, which includes Word, Exel and other applications. We introduce the diameter icon in the Word as an example. In other cases, the input procedure is the same. In the process, go to the toolbar called "Insert". It is located at the top of the screen between the “Home” and “Page Layout” tabs. Move to this inscription and do a single left-click. Then on the right side of the screen we find the “Symbols” pane. On it, select the item “Symbol” and in the opened list select “Other symbols”. All these manipulations are performed. right click mice.

The insert window will open. In it we find the “Ø” we need by scrolling the characters. This can be done using a special wheel or by repeatedly pressing the left button of the paddle on the strip to the right. When “Ø” is found, select it once by pressing the left key of the manipulator and press the “Insert” button (located in the lower right part of the window). Then close the window. After this, a diameter icon should appear in Word (in its workspace). The disadvantage of this method is that it works only in one group of applications. Therefore, use it everywhere will not work.

Clipboard

Another way to insert "Ø" is based on the use of the clipboard and a combination of operations "Copy" and "Paste." First you need to find somewhere this symbol. For example, you can insert a diameter badge in the Word in accordance with the previously described method. Then select and copy it (you can use the key combination "Ctrl" + "C"). Then go to another application and use the paste operation ("Ctrl" + "V"). The disadvantage of this solution is that the source symbol is needed. And he is not always available.

Finally

The diameter icon on the keyboard is missing. But it can easily enter one of the three proposed methods. The simplest and most versatile of them is based on the use of so-called ASCII codes. It is not tied to a single application and works in almost all programs of the operating system.

AT text editor MS Word has a rather large set of special characters, which, unfortunately, far from all users of this program know. That is why, when it becomes necessary to add a particular symbol, sign or symbol, many of them do not know how to do it. One of these symbols is the diameter designation, which, as you know, is not on the keyboard.

Everything special symbols in Word are in the tab "Insert", in Group “Symbols”which we need to ask for help.

1. Place the cursor in the text where you want to add the diameter icon.

2. Go to tab "Insert" and click there in the group “Symbols” on the button "Symbol".

3. In the small window that opens after clicking, select the last item - “Other Characters”.

4. You will see a window "Symbol"in which we have to find the designation of the diameter.

5. In section "Set" select item “Augmented Latin 1”.

6. Click on the diameter icon and click on the button. “Paste”.

7. The special character you select will appear in the document at the location you specify.

Adding the “diameter” sign with a special code

All characters that are in the “Special Characters” section of the program Microsoft Word have their code designation. If you know this code, you can add the required character to the text much faster. You can see this code in the symbol window, in its lower part, after clicking on the symbol you need.

So, to add a “diameter” sign with a code, do the following:

1. Position the cursor where you want to add a character.

2. Enter the combination in the English layout “00D8” without quotes.

3. Without moving the cursor from the selected location, press the “Alt + X”.

4. The diameter sign will be added.

That's all, now you know how to insert the diameter icon in the Word. Using the set of special characters available in the program, you can also add other necessary characters to the text. We wish you success in the further study of this advanced program for working with documents.

In cases where you need to specify the size of the diameter, use a sign in the form of a circle with a line "Ø". This symbol is applied in front of the dimension number.

Examples of using the diameter symbol:

Signs of diameter on the details of rotation of a cylindrical and conical shape

The sizes put with a lack of a place
on the dimension line

Size designation with limited space
for arrows

Diameter - This is the length of the segment of the straight connecting surface of the circle. The segment of diameter, in any case, passes only through the center of the circle. Usually denote it latin letter “D” or “Ø” sign. If the radius of the circle is multiplied by two, the sum will be the diameter. All volumetric bodies having a spherical shape, as well as those at least one of the possible sections of which is a circle, are denoted by symbols of diameter. The word " diameter"Comes from the Greek word" diametros"- diameter.

Example of marking four holes
with diameter

In technical drawings, diameters are indicated by a symbol in the form of a crossed out circle "Ø". This sign is placed before the dimension numbers of parts, which can be either cylindrical or conical.

In section, the cone is a right triangle, one of the legs of which is parallel or pine to the body of revolution. Its parameters have the following notation: “D” is a larger diameter, “d” is a smaller diameter, and “L” is a length. In the drawing, the diameters of the cone are denoted by numbers, in front of which there are “» ”signs and the numerical value is long without any letter symbols.

The most common parts with cylindrical surfaces are shafts for various purposes. Cylindrical bodies formed by rotating a rectangle near one of its sides are indicated by a diameter. Smooth shafts have some design features, and are divided into versions: straight, stepped single-sided, stepped double-sided and heavy. For example, shafts of asynchronous motors, in which the rotor is mated with the shaft by pressing on its largest diameter, and on both sides there are steps for bearings, fans, and pulleys. Bilateral stepped shafts can also be found in various mechanisms where other design features are required. Cylindrical parts, as a rule, have a total maximum length and outer diameter. Depending on the specific configuration of a product, it may include such elements as internal and external grooves, steps, undercuts, etc., with various diameters in front of the values of which the “Ø” signs are put.

An example of drawing a diameter sign
on a spherical surface

Components with conical surfaces include instrumental adapter sleeves, in which the outer and inner surfaces are tapered. Such bushings provide high centering accuracy and tool change speed with sufficient rigidity when used on machine tools. Transitional sleeves are short and long.

The conical instrumental parts of this type are called “ morse taper"And are divided into numbers. Angles, lengths and diameters of adapter sleeves can be taken from special tables. The tabular data uses letter symbols such as - “d” is the smaller diameter, “D” is a large diameter, “L” is the length of the part. In the drawings, diameters and lengths are designated by numerical values, with the “Ø” sign placed before the diameter numbers.

« Cone morse"- in addition to adapter sleeves, it is used in the manufacture of shanks for spiral drills, end mills, tools and mandrels. Instrumental cones are fixed by elastic and plastic deformation. For the implementation of such connections in the spindles of milling and turning machines, there are conical holes for the installation of an auxiliary tool. In addition, in the lathe, the tailstock quill has the same tapered bore.

The technique uses a large number of parts and their elements to designate which the diameter sign is used. For standard diameter sizes, a parametric range is used, which includes the standard dimensions. In the development of technical products, the calculated diameters are rounded to their nearest values. When indicated on technical drawings, the sign of the diameter should be accompanied by the axis designation by a dash-dotted line, which indicates a circular cross-section of the part area.

To indicate the diameter in the drawings and technical documentation is used special sign. However, on the computer keyboard, this symbol is missing on both the primary and secondary keys. Nevertheless, it can be placed in the text, if it allows the format in which this text will be stored and subsequently displayed. The txt format, alas, will have to be deleted immediately, and the instructions for word documents and html below.

Sponsored by the placement of P & G articles on "How to put a diameter sign" How to type the icon "dog" How to put a degree sign How to measure the diameter of the pipe

Instruction

Use a special component of the Windows operating system, which is called the "Character Table". A link to its launch can be found in the main menu on the “Start” button - opening it, go to the “All Programs” section, then to the “Standard” subsection, and then to the “System Tools” section, where you will find a link with this name. Another way is to press the key combination win + r, in the opened program launch dialog enter charmap and press the Enter key.

Find the diameter icon in the table. Please note that there may be several similar characters in the outline - at least two (depending on the typeface installed). On the first page you can find two options - select the most suitable one and double-click it, and then copy it to the clipboard by pressing the “Copy” button.

Switch to the document window where you need to enter the diameter sign, and paste it from the clipboard by pressing the key combination ctrl + v or ctrl + Insert.

You can do without the symbol table if you know the code associated with this character in the code table. AT Microsoft Office Word, you can enter a hexadecimal code, then press the alt + x and word processor replace the code with the corresponding icon. The two icons that you found on the first page of the symbol table correspond to the hex codes 00D8 and 00F8.

Use mnemonic character codes to insert diameter icons into html pages. For example, if you place a sequence of ∅ or ∅ characters in the document code, then for the page visitor the result will look like this:?. The primitive symbol ⊕ or ⊕ looks like this:?, ⊗ or ⊗ -?, Ø or Ø - O, ø or ø - o.

How simple

Other related news:

how to find missing characters on the keyboard? * AT Microsoft Windows XP, click Start, and then click All Programs, Accessories, System Tools, and Symbol Table. * In Microsoft Windows 2000, click the Start button, and then select the Programs command,

Typographic symbol in the form of a superscript circle, which is usually denoted as the dimension of angles and temperatures measured in degrees, is not on the computer keyboard. However, it is in the coding tables that operating system uses to display characters on a computer screen.

When typing in MS Word there is a need to insert special characters, such as: diameter icon, letter Alpha, copyright icon, etc. For their insertion, there are special combinations and regular insertion, by means of Word.

To go to the section of special characters in MS Word, go to the navigation menu - Insert - Symbol - Other characters (to see the entire list of special characters).

Select any special character from the list and click insert. Also, in order not to constantly enter special characters, for each of them there is a shortcut key, which is visible when choosing a character.

In order to use the shortcut keys, hold down the Alt key and press the combination 0176 in turn and release the Alt key, the degree icon will appear in the document. The main condition of the digit is to press on the small keyboard on the right, both on the laptop and on the keyboard of the desktop computer.

Consider in detail the shortcut keys for the most popular special characters.