Yak turn on a mouthless Wi-Fi net on a laptop. Enable WiFi on laptops of older models

Food about the inclusion of wi-fi on the laptop, check out the bagatooh. Foldable can be seen through those that the skin model has its own recommendations and instructions. One way to complete the combination of keys, in the same versions, the switch is mechanically victorious.

Includes Wi-Fi on laptops

Enabling Wi-Fi on the laptop behind the additional key Fn + F5

Call on the keys, which show for the connection to the Merezha, the presence of the stylized image of the antenna. Not important, on any laptop - Acer or HP. This is the button you can know for sure. Alle the combination with it, there is a development.

• Fn + F2 - Work Combination for WiFi lineup Asus.
• Fn + F12 needs to be done by a team to add a laptop from HP. Abo є okrema button, on which image is a wire-free hem.
• Fn + F3 - enable WiFi connection for MSI models.
• There are two options for Samsung: Fn + F12, or Fn + F9.
• Lenovo is seen from HP or Acer. In order to get the job done, in this model line it is more often than not to use mechanical changes. Ale Practical and Key Fn + F5.
• F8 + Fn - keys, which allow you to set a call on any Toshiba laptop.
• The appearance of a mechanical transfer pump is typical for a model a number of Sony Vaio.

You can joke a button, as I play the role of a re-pump, I will attach it on the butt, as Fn is at the end of the day. Connecting WiFi on the laptop in the distance, but still not working? You can, the problem is shouting in established WiFi operating system Windows.

What about the software included?

Inodi is required for the provision of special software security in order to turn on the adapter on the laptop. Samsung models have Easy Settings utility. Intel PROSet - the program is installed on any laptop from Intel company... It is necessary to vrahuvati, as long as there is no way to know the mechanical changeover, if you do not work with the combination, meaning it.

Installing a connection in Windows operating systems

Inodi adapter from the very cob into the operating system, on the software basis. Todi turn on Wi Fi is simpler than simple, without additional steps.

A useful item on the control panel is displayed to show our little ones. We need a button to change the adapter and its parameters.

There will be a list, in which there will be more than one adapter. We need the one that has a Wireless postscript or “Bezdrotova Fringe”. The Wi-Fi adapter itself, we need to connect it.

Koristuvachi can be stuck in this vypad in two situations.

1. Syriy icon, if the adapter is installed.
2. Color adapter

More details about the problem

Please click on the images right button Misha, as an adapter of syria, otherwise it will be lost without barriers. show up context not menu, We need to vibrate the function of the included Wai Fai. Pislya tsiogo can see the image either from the brass hem, or from the worm with a chrest.

What about another situation?

Pristriy into the distance of the switch, but the Wai Fai net is not included.

Inodіtse vіdbuvaєtsya through the normal mode "in poloti". In the most recent situations, you can visit additional parameters... Use the right mouse button to reach the Wai Fay icon, then turn on the sound.
splice okreme vіkno, De us and need vibrate the function to turn on "Wai Fay". abo dumb fringe... In addition, if you want to turn on everything, you will see a list of available Wai Fay fences, which can be used to process. It’s late only when it’s connected.

Revised driver. Chi є are there problems with them?

Inodi set up the net Wai Fay does not go out through those who are in the driver's seat. Abor, if you vipadkovo saw koristuvach, for if the stench didn’t arise.

Viewed from the list of attachments dispatcher. It is located in the Windows control panel, in the "Ownership and sound" section.
We need to wonder who is not possessed by entrusting the sign of the call to be lit, which is a red one. Particularly, there are elements that are related to the reception of WiFi.

If problems are evident, you will need to install drivers for WiFi.

About deyakі nalashtuvannyah z'єdnannya

Wrong router rosetting - a pity, yaku zd_ysnyuyut a lot of koristuvachіv. Through the WiFi network, the process is not so fast and stable, as I would like to b. Navigate on Yakisny Acer models. The router is recommended to be installed in a wide range of electronic bypass technologies. The price is tied to the robot using the same frequency as WiFi - 2.4 GHz. Through the price on a laptop WiFi speed to decrease, to navigate as far as everything is included for instructions.

Nalashtovuєmo WiFi for local fancy

There is a computer and a router behind an additional cable. Persh nіzh nіzh namagatisya shhos nalashtuvati or turn it on, changing in the one that z'єdnannya bulo is installed. As soon as everything is in order - instructed by the year to appear in the picture. The robotic diagram is the same for Acer models. HP and іnshih.

At the authorities of the connection, it is necessary to enter a singing set of danikh.

IP addresses: 192.168.0.2 Passport mask: 255.255.255.0 Default gateway: 192.168.0.1 DNS: 192.168.0.1

In the instructions for some models, you can find some information. Inserted by the very ones, just go to the supra-documentary. vidkrivaєmo command line for vivchennya of the other possibilities. Nalashtuvati WiFi can be done through the Start menu, write "cmd" as a joke. At the command row, a combination of ping 192.168.0.1 was typed. We hope to see the packages from the central address, as everything went well. You need to know if the IP address is received by the router on the internal interface, so that you will be notified about those who are “changed”. Please set up and turn on WiFi not visible.

You can set up a Wi-Fi, having changed two remaining numbers, as soon as you know about a little bit of a sale.
1. 1.2
2. 1.1
3. 0.2

Go to the Wireles Settings section, set up a wifi. When we write it, I will call it the master's hedge Weifai. Chain Name (Ssid). The Channel item has an Auto function, which is known from the list of your region. zavdyaki this decision You can set up a Wi-Fi router in such a rank, which will automatically whine the channel with the lowest number of pereskod. An onslaught on the Apply button, so that you can save the ones that are getting us into the distance.

How to enable WiFi in Windows 8?

Establish WiFi on tsiy operating system not foldable, not on the smallest.

1. Vibiraєmo Start, and then go to the Control Panel.
2. An onslaught on peremikannya to the classic viglyad. We know the center, which is responsible for the management of the grid connections. Here, I also shared my childless WiFi connections.
3. Onslaught on the utility with the right button of Misha. The first item is vibrated with WiFi power. Here, the presence of a row of automatic rejection of IP-addresses is to blame. Onslaught of the OK button when the prompts are visible.
4. Turning into a folder with keruvans with hedgehogs. I will know that it will be necessary to dispense a mouthless z'єdnannya WiFi... Onslaught on a new one with the right button of the Misha, the item "plug-in-plug" is vibrated.
5. Only vibrate and restore access to required wifi.

See the icons appear on the screen, in the right corner, in the lower part. If everything is correct, then the image from WiFi will be active. As soon as everything is in order, it’s necessary to connect to it.

Far from being skinny, you know how to turn on Wi-Fi on your laptop in case of any non-transferable problems. Pochatkіvtsі koristuvachі ruin, not sounding Wi-Fi activation by standard methods.

Try to look at everything you can Wi-Fi enabled and the solution of the most common malfunctions, which can be supplied with an adapter for a mouthless laptop.

The simplest method of activating a childless hedge on a laptop from "Vindovs" is a quick transfer of keys for the whole computer.

Quickly put the ciches on for the most popular laptop models (in most of the types, the keyboard itself is used, in the native ones - a special remixer):

• HP (HP Probook, Satellite, Pavilion, 4535s and іnshі) - Fn + F12;
• Acer (Acer Aspire і інші) - Fn + F3, similar to those of Packard Bell;
• Asus - Fn + F2;
• Lenovo (G580, G50, G500, G570 and іnshі), including Ideapad - Fn + F5;
• Samsung - Fn + F12 or F9;
• Dell (Dell Inspiron і інші) - Fn + F12 or F2;
• MSI (MCI) - Fn + F10;
• Toshiba - Fn + F8;
• DNS - Fn + F2;
• DEXP - Fn + F12;
• Sony Vaio - for the help of a mechanical transfer.

The Danish method is not expected to be successful, it will be passed on to the program data.

Through the system tray

Another method of turning on Wi-Fi is to manually activate the adapter through the system tray.

To speed up the option, just click on the hem icon in the lower right corner of the system and press on the wifi icon. The module of the mouthless connection will turn on and automatically start to pop up the framing available for connection.

All in all, it is possible to replace the presented one with the system vivede and with the interchange of functionality, de clavisha, for other things, it is necessary to turn on the Wi-Fi, if it is just visible.

As soon as there is no reason for the koristuvach, the reason for the statement itself is obvious, then we turn to the offensive method.

At the center of management

The alternate way of thinking is not correct for a number of reasons - for example, the adapter of the mouthless hedge for the connection in the Windows 10 or Windows 7 settings.

Schob correct, you need croc after croc viconati follow the instructions:

1. Onslaught on the keyboard combination of the keys Win + R and at the Vikonati, the phrase "ncpa.cpl" is entered through the command row. Stamp on Enter or "OK".

1. Shukaimo u vіknі " Merezhevі connection»Block" Bezrotove nerezheve z'єdnannya ". As soon as the visions are in the blue color, and in a row the value "Connected" will be displayed, the adapter of the mouthless connection is able to be connected systematically.

1. To activate the onslaught, use the right button on the seen block and on the onslaught on the "Turn on" button.

1. Successful inclusion will be supervised by activating the adapter and renaming it in the row.

1. Turning to the first method we have seen - the button for activating the wifa is guilty of appearing on the designated message.

The Danish method may not be suitable? The tsomu doesn’t have a terrible thing, we just go over to the offensive method.

Enabled through the Attachment Manager

The price is great, protean mesh adapter can be connected to the system attachment manager. Call the price to see if it is a verdict of a zboy, an independent form of the koristuvach himself.

Visually, it is easy to use the adapter of the mouthless connection through the attachment manager, in the end it is simple - it is possible to switch to another method, descriptions in the statistics, as shown by the Win + R command, it is introduced by the Win + R command. switch. Yaksho in this particular day mouthless adapter This means that the problem is clearly visible in the attachment dispatcher.

As soon as there was no problem with the introduced methods, there was a problem with the drivers of the adapter for the mouthless hedge.

new drivers

An outdated or outdated driver may be the main reason why public access to Wi-Fi is not distributed via Wi-Fi Direct. Installation or reinstallation of the driver does not take a great deal of an hour - just go to the website of the virobnik, to know the model of the laptop and the link required driver from the list of proponents.

visnovka

Do not panicuvati if you don't have Wi-Fi on your laptop - you need to reconsider everything last any reason diagnosing similar problems, fixing them from new ones.

VIDEO instructions

we pinned report to the instruction in video format. At them, the process of storing the skin and digestive methods is a process.

The availability of wi-fay gives the opportunity to use the Internet in the most recent events. Ale persh nіzh vdatsya, having groped in a cafe or on a bench in the park, zaurititsya in the Internet, need to use your laptop and know how to turn on the hemline on the laptop.

There is nothing foldable in that you can integrate the function of wireless connection on a laptop, it is not. You just need the nobility of functional keys to include mouthless ring on a laptop of its own brand, so the skinny wyrobnik plays with the combination of keys in its own way. Tim!

• how to integrate the function of wireless connection to Asus laptops, It is necessary just to draw Fn and F2;
• button for a mouthless connection on a laptop HP- combination of Fn and F12 or touch button with a small antenna in quiet models, de taka є;
• on Lenovo, Fn and F5 are pushed on, or a special remixer, which can be used in the instructions;
• Acer and Packard Bell include a combination of Fn and F3;
• on other Samsung models - either Fn or F9 or Fn and F12.

If the standard combination does not fit (in new models, it may have been introduced), then it follows that the instructions from the virobnik come in due respect, and all the necessary information is required, depending on the function. At any time, there is a Fn button, and in the air, a special button with a small antenna is pressed.

Enabling mouthless phone calls on laptops by other methods

Yakshcho on the keyboard is not a change, but it can be bichnu panel for the lower part of the laptop. Roztasovani on the lower part of the button to be rocked by uncomfortable, it is necessary to show special respect, so that you know there. Even though they weren't combinational, they couldn't switch on a dumb line, then, better for everything, wi-fi just doesn't get adjusted, and it’s just an hour to get busy.

How can I turn on the Mouthless Heel Adapter?

Whether the setting should be repaired from the reversal of the explicitness required drivers I connect, as long as it stinks, but I don’t connect, I can download and install, and then I connect, if I do not have a laptop. The driver can be revised through the "Control Panel", the menu item "Attachments Manager". If the child is not visible at once, then, perhaps, it should be in the distribution "Possession and sound".

From the "Dispatcher" it is necessary to go to the "Merezhev adapters" and find the Wireless connection there, which is necessary. Maybe bootie, don't write it down, for there is a sign of a hail. It is a direct result of problems with the drivers, as it happens to get a chance to get up. The stench is guilty of being present on the disk, which reaches the laptop. As long as the disk has been inserted, for some reason not to enter the installation, you can joke on the virobnik website.

If the driver is є, if it is marked with a hail sign, then you need to click on the icon with the right button and in the menu, vibrate the item. Call the whole phrase "Engage". It can be included in the same way as the adapter for power saving mode.

You can put down the economy factor in windows menu 7 in the branch "Vlastivost", is responsible for the subsidiary "Management of electrical supplies". The new one should have a tick on the item "Allow the connection for the economy."

In order to check the box, the driver will be successful, and it can be connected to the standard onslaught of keys. Even though the descriptions of the manipulations did not bring any results, the laptop needs to show the fahivtsev - it’s possible, it’s okay.

strana-sovetov.com

Yak turn on a mouthless hemline on a laptop

Bezrotova wi-fi- the price of the ease and efficiency of the robot in the Internet, whether it is any mission, de to new access. It’s a bit of a problem to connect a laptop to Wi-Fi. In most cases, it is easy to put down, but only in some cases it is necessary to carry out a number of parameters.

Mouthless Internet in any laptops is turned on with an additional button from the antenna images. Shukati її slіd on the building annex.

In most new models of laptops, there is a button for turning on the bottom of the screen. Todi the childless Internet must be turned on by pressing the key once more:

• Asus - "Fn" - "F2";
• MSI - "Fn" - "F10";
• Acer - "Fn" - "F3";
• HP - "Fn" - "F12";
• Lenovo - "Fn" - "F5";
• Samsung - "Fn" - "F9" or "Fn" - "F12".

If a call adapter is used to connect to a laptop via a USB port.

If a Wi-Fi adapter is installed in the laptop, then, if you connect to the mouthless fingering, you need to turn it on in the windows. For the whole it is necessary to press the keys "Win" - "R", then at the window enter "ncpa.cpl". At the section "Change of adapter parameters" (aka "Merezhevi plugged in") there is "Bezdrotove nezadnannya". As soon as you see it, you need to press the right button on the mouse and vibrate “Turn on”.

Through this you can see the connection of the Wi-Fi adapter to the "Attachments Dispatchers". As soon as it has become, then in the "Merezhevikh Connections" the icon "Bezdrotove Merezheve Z'єdnannya" will be visible. If you think about the problem, you need to press the "Win" - "R" keys, then enter "devmgmt.msc". At the "Dispatchers of attachments" vibrate the distribution of "Merezhevie adapters" and know the attachment Wi-Fi or Wireless. Click on the new right button of the Misha and vibrate "Zatyati".

In some cases, it is necessary to independently enter the parameters of the framing, as it is practical in the attached mode. Schob tse zrobiti, it is required to see "Center for fencing and by gaolny access", Vibrati" Management of mouthless fences "," Dodati "and sometimes" I will create a profile of fences ". Enter the required parameters into the table, read "Dal" and "Connect".

In some cases it is possible to install laptops, in which to connect to a childless mesh, you need to run the Wireless Assistant or Wi-Fi Manager, which can be found in the Start menu. If you want to, you can turn on Wi-Fi without any problems.

SovetClub.ru

Turn on and set up Wi-Fi on laptops with older versions of windows

Vlassniks of laptop Wi-Fi adapterє on all laptop models without a fault. However, it’s faster for them, in order to get it done, like turning on wifi on the laptop.

Quick access abo hardware transfer

First, it is necessary to physically turn on the Wi-Fi adapter. On older models of laptops, the procedure is threefold, the protest is the same: it is necessary to display a device change or to speed up the functional keys. The butt grip is visible:

Providing Wi-Fi enabled options is available for MSI, Acer, Samsung and other brands. Navigate the series of one virobnik You may see one way of activating the childless module, to that:

• Take a look at the body of the laptop for the presence of a hardware changeover or a Wi-Fi on button.
• Vivchіt klavіatura - one of the keys in the F1-F12 row is guilty of buty is marked with a mouthless z'єdnannya icon. If you press the Fn button at the same time, the adapter will turn on or not.

If you have a Sony Vaio series laptop, then neither hardware keys nor Fn buttons on this keyboard may or may not be. for robots wifi In this case, a special utility is required for the VAIO Smart Network, you can know how it is on the official website of the virobnik.

The Fn button is not working

Why robiti, don't you just use the Fn button? Yak in such a problem turn on the adapter? You will need a lot of questions, for which the keyboard is not suitable. Fn is correct for BIOS controls and I can use the utility, without setting a key it will not function. To that, if the button is not working, you need to know the information on the virobnik website for specific models laptop utility for turning on hot keys (in the name of the word “HotKey”).

If the installation of utilities did not help, or if the keyboard was physical, then it will be done quickly alternative method adapter included. On windows 8 and windows 10, to enable the adapter, click on the Wi-Fi icon on the panel as soon as possible and put the "Bezdrotova fingering" checkbox in the active position. If the adapter driver is installed, correctly, then the icon is guilty of the problem.

Windows 7 has no such functions, but you can try to turn on the mouthless connection through the adapter parameters window (see below for more information). If it’s not possible to do it, then it’s possible to get the sound of the keyboard with the working keyboard Fn, and then it’s no longer possible Wi-Fi module.

Setting up Wi-Fi on newer versions of windows

With the physical inclusions of the module, you will be able to finish quickly. Inodi on tsyomu Wi-Fi setup To end: the necessary system of viroblya is self-contained, in the list of available mouthless points. Ale decal will be brought up by hand.

Independently from windows version Something needs to be changed if the drivers of the Wi-Fi module were installed without mercy:

For the sake of beauty, go to the official website of the laptop virobnik and know I'll stop the version driverless module for your model. In addition, click on the adapter with the right button and select the item "Work" (which is the same robot zupinena).

windows XP

For now, windows XP has long been guilty of being wrong, but on some old Dell models and other laptops, the legendary system continues to offer more functionality. Wi-Fi in the middle of windows XP will be established in the following rank:

1. Change whether the Wi-Fi indicator is on on the laptop (so you turned on the adapter and installed the drivers).
2. Open "Control Panel".
3. Know the section "Merezhevi plug-in".

At the vіknі of the provider, the badge "Bezdrotove nerezheve z'єdnannya" is guilty. It demonstrates that the Wi-Fi module is correct. Click on the icon with the right button and select "Turn on". given:

As far as the available points are concerned, there are no heels, like distributing your router, click on the "Update List". Then select the required point on the “Connect” button. If the hem is password-protected, you will be prompted to enter the access code, for which to get up.

windows 7

On windows 7, the order of connecting to a childless hedge has changed, having become simpler. Now, all available lines are displayed by clicking on the Wi-Fi icon in the system tray. Ale if there is no icon, then:

1. Go to the fencing management center.
2. Klatsnit "Change adapter parameters".
3. Know the dullness of the day and cross over, how the bully is dribbled.

When you turn on mouthless data, the Wi-Fi icon appears in the tray. Press on a new one, scribble a list of available points, wrap the net and click "Pidklyuchiti".

windows 8

On windows 8, the order of connecting to Wi-Fi is overwhelmed, however, the mode "U litaku" is added, but it is necessary to use it. If the driver of the adapter is installed and is not installed correctly, then on the panel you can change the Wi-Fi icon, when you click on it there is a list of available fonts.

As long as the icon is dumb, check the same for windows 7 - open the "Change adapter parameters" checkbox and turn on the rootless connection. I do not know the most dull-less problem, change the driver and the module's stan- dard - everything is included and installed.

If the adapter of inclusions is installed, the drivers are installed, if the available hedges are not detected, turn it over, so that the icon does not appear on the panel for the "On the go" mode. Yaksho win є, you need to turn on the mode. For a full onslaught on the badge, it is translated into the camp "Included".

windows 10

On windows 10, everything is overwhelmed with a lot of small changes, so you can quickly figure out how to connect the laptop to Wi-Fi:

1. Click on the childless entry icon in the tray.
2. Viber will need a border.
3. Connect "Connect" and enter the password.

If the access point is not visible, try adjusting the stitching parameters. Klatsnit on the same basis - see the distribution "Merezha and the Internet" parameters in windows 10.

There are two tabs for you:

• Wi-Fi - perekonete, where the mouthless fingering is turned on.
• The mode "in lіtaku" - to feel good about the mode of switching on.

You can go to the section for changing the parameters of the adapter and turn on the mouthless system. It seems simpler, on windows 10 you have a few more competitive options - you need to have a better way of vibrating for yourself.

Bezdrotova fancywork has long become a popular choice for computers and laptops. Vikoristovuvati її easy and handy. Access to the Internet can be rendered in any point of the apartment or in the office, but at the same time you will not be wandering around with your feet. You can access the Internet not only from a laptop, or from a tablet or a smartphone.

However, the larger part of the koristuvachi does not know, yak virishuvati navit simple problems Connected to the router, and not smart, as to integrate the wireless connection function on the laptop. If access to the Merezha is lost, there is no need to call directly to technical support provider. You need to get a chat if you want to connect to the Internet: a computer or a service provider.

In some models, for example MSI GT780, the keyboard is roztashovana touch panel, Yaka allowing one torkanny to turn on or to vimknuti a mouthless edge.

How to integrate the function of wireless connection on a laptop through the "Center for fencing control"

There will be vip drops, if you accept Wi-Fi connectivity by software and activate it for an additional button, or it would be unwise to get the keys. How can you use the function of wireless connection on a laptop (Lenovo, Asus or Acer - not so important) in such problems?

Koristuvachev needs to be pressed with the right mouse button on the "Merezha" icon on the panel of the building. Give the list vibrate "Center for fencing management". At the window, go to the side, you can change the adapter parameters. In the middle of the list proponated, vibrate the mouthless hem and turn it on.

Connect to change the color from gray to color, and in a ten hour the connection to the Internet will be established.

Enabling mouthless calls through the "Attachment Manager"

You can programmatically activate the fencing adapter through the Attachments Manager. As a rule, some of the connected connections are slow, in the main - for an hour at a robot operating system.

Turn on the Wi-Fi adapter through the Attachments Manager, you need:

• Open the "Control Panel" tab.
• Vibrate from the list "Possession and sound".
• At the group "Attachments and printers" click on "Attachments manager".
• Open the turn of the mesh adapters.
• Click the right mouse button on the way to take revenge on the word Wireless, and press “Turn on”.

With this rank, you can turn on a non-mouthful hemline hardware or software.

How can it be simpler, not connect to the wifi dumbbell? Wait to enter the password and check the setting of the data. Call it like this and see it, but it’s okay, if the connection is interrupted (without access to the Internet) or the calls don’t get started? Let's talk about the reasons, through how they come to terms with other diseases, and about those who fight for them.

Why Windows 8 doesn’t run WiFi grids or connect to them

Computer abo laptop pid Windows management 8 do not batter Wai Fai for the coming reasons:

• WiFi adapter is not installed, if there are any faults;
• in the system an external driver of a childless hedge;
• on computers of inclusions the mode "U litaku";
• in the zone of your distribution there are no points of access to mouthless fences;
• access point ( mouthless router), Yaka is known to be entrusted, switched on, incorrectly adjusted or unjustified;
• the standard of communication between the computer and the access point is not mutually adaptable;
• near there is a pristіy, which turns off the radio signal;
• WiFi adapter works in monitoring mode.

Where the framing is visible, but the connection does not fold out or is surrounded:

• access to the Internet for a given fence not setting up or burrowing;
• connection to the framing is surrounded by the administrator;
• the access point is not visibly powered through rewiring;
• vikoristovyutsya nevirnі access point settings.

Renewed connection to childless hedgehog

Reversible mesh adapter

Stationary PCs are suitable for sales without WiFi adapters, so you have to buy and install an okremo adapter to connect to mouthless fenders. For example, such, yak on karttsі.

For a laptop, the Wi-Fi cupuvati adapter is not required - it is already in the middle.

If your laptop is smart enough to connect to them, you need to turn on WiFi. On some models, a switch or a button on the body is transferred for the whole.

On the first ones, use the same keys Fn + F1 ... F12. For the inclusion of the mouthless adapter displays the keyboard from the antenna images.

If the WiFi adapter is turned on, it has to appear in the dispatcher Windows add-ons 8. To reconsider, run the dispatcher from the context menu Windows buttons(Start)

і open the list of "Merezhevі adapters". If your adapter is on the list, it means that the system has recognized and installed it. As soon as you see it as if you weren't looking at it, go to the site of the virobnik and install the driver.

Just as an adapter for connections, but the system does not need to be installed, it is not necessary to run it in the BIOS.

An option, as a result of a robot on the basis of WiFi, to be called OnBoard Wireless LAN abo WireLess LAN support... The values ​​are "Enabled".

If you do not need to switch, the mouthless adapter does not interfere with the traffic monitoring mode (monitor mode). If you want, this is the victorious mode, just know about it (win the installation of a special driver).

Reversed access point

As long as a PC or a laptop does not back up a home access point, try to connect to it before. For reversal, it is possible to vikoristovuvati social networks, for example, in cafes or in parks, or in private - at your friends. Schob reconversion stationary computer do not blame at home, you can spend an hour on the outbuilding virtual point access.

As long as there is no childlessness, there are no problems with the adapter or WiFi infusion on the computer, and if there is no connection only to one point of access, it is a problem, just right, there is no problem.

Krok diagnostics (if the next croc is not grafted to the problem, go to the offensive):

• Cross over when the access point is turned on and the viprominu signal (to start behind the indicator of the mouthless fingering).

• Switch over, charging a router and a computer with no attachments, and connecting electromagnetical switches - radio telephones, microchip ovens, external power cables. Try to move the access point closer to the PC, so you can adjust the signal.
• Get the router and know it again. If there are any problems, you will be able to find the correct adjustment: we will use the object - a toothpick or scratch, press the Reset button, which will be located on the back or the lower side. All settings will be updated before the purchase is made after the start of the purchase.

• Change the frequency channel of the change. Connect the computer to the access point for an additional cable, go to the menu for adjusting mouthless hemlines, know the option " Channel»І go to the first channel. It is possible, for example, from them to be connected.

• In the same menu, flip the "Prikhovati SSID" setting і, if it is active, select "Ні". When the SSID is displayed, it will not appear in the lists of available connections. You can also turn on the support of the standard b / g call to vipadc, as the Wi-Fi adapter to your computer is working on one of them, and the access point is to the one, for example "a", which is "b" and "g" not pіdtrimє.

• As soon as the access point is connected to a lot of annexes one hour, you can go through the re-entanglement by the way. Budinki such situations are small, but they are not often used in organizations. Try to connect until іnshoї, less tied up with a net, or try again in a dozen hour.

Revamping Windows 8

"U litaku" mode

WiFi can go through the chasm through those that have activated in Windows 8 the "Utilize" mode - in this mode, the fencing adapter can be activated and the computer does not run the same fiddleless fringe. On the other hand, the problems have been clearly identified through the price, in addition to the icon of the hedge in the system tray - you will be able to fill up a litter.

To enter the user mode in Windows 8, open the Charms bar and click the Parameters charm button.

Like the cliché "Change of computer parameters".

Get over it, so Windows know how to build WiFi, and the icon of the hedge in the tray has taken over a great number of views.

Merezheva diagnostics

Windows 8 has a tool that automatically diagnoses problems with connections to fencing. Vin is called "Diagnostics Windows fathom". Tsey tool to back up and learn a lot of conversion code for WiFi robots, for example, if there is a connection є, if the computer is not connected to the Internet (connected to the Internet) or Internet є, if there is no access to the site.

If the connection is framed, the icon of the framing in the tray is indicated by the sign of a hail.

To start the Windows 8 hedge diagnostics, click on the end of the hedge with the right mouse button and vibrate in the "Troubleshooting" menu.

Utility to convert all the lines of data on computers and to signify, without interconnection, access to the Internet. local problems If you can correct, you will be usuned automatically. And if the connection is not connected, for example, through a problem with the access point or problems on the sides of the provider, the information will appear at the window with the sign "Not corrected".

As long as on the PC there is a plug, which is interconnected only one, or because the diagnostics do not cause problems, it is possible to diagnose only the border. To go to the "Center for fencing and access control" and go to the folder "Connected merezhev" (click on the "Change adapter parameters" in the panel).

Open the context menu for connection, how to connect, and read "Diagnostics".

WLAN auto-adjustment service

Problems with the connections are detected and due to the connection hemming services, Scho became vipadkovo or through ignorance. per robot WiFi Windows 8 displays the WLAN autoconfiguration service. As far as the Ethernet connectivity is concerned, it is not interconnected, and the system simply doesn’t need to be installed without a mouthful, but it’s just not necessary to find a rewrite from the whole service.

• Open the "Services" program: open the context menu of the Windows (Start) button and click "Viconati".

• Enter the command in the row "Vidkriti" services.msc and press OK.

• Know by the list Windows services 8 WLAN autotuning, go to the menu and select "Power".

• If the service is zupinen, click "Start", and from the "Start type" list select "Automatic".

WLAN auto-scaling service could start, it is necessary, schob pracyuval іnsha service - Dispatcher Windows key... Know this in the whole list and establish the same analogous adjustment.

іnshі parameters WiFi connection do not work on the PC manual settings... All data for access to the Internet - IP, gateway addresses, DNS and other information, will be automatically rejected from the DHCP server of the access point.