Attachment manager in Windows 7 hot keys. Yak vidkriti Attachment manager. Video: video dispatcher

Bagato koristuvachіv see difficult things because of appeals to food about those, as the manager of add-ons on computers has seen. On the right in the fact that when normal robots operating system Windows, the presence of any problems with the drivers or peripheral annexes, Koristuvachevi mute no need for some nobility about the presence of the Attachment Manager on computers.

When there is a malfunction in the robotic operating system, or possession, the criminals are informed about the reasons for what has become, with an additional joke on the Internet. In the midst of appearances, it is often the case to be amazed at the information in the attachment dispatcher.

The control console includes the equipment of the Attachment Manager, in which the attachments are installed, the view of the resource, the drivers. The attachment dispatcher displays information about the attachment, you can control the drivers, turn on or off the attachment switch.

For the help of special badges (near a nourishing hail), it seems like a possession, information about the problems that have come to the robots of quiet outbuildings is brought to the koristuvach. This will help to identify the cause of the malfunction in the computer's robot.

For example, there is no sound on a computer, but there are problems with their attachments. You can, the problem was detected through the drivers. improperly adjusted possession. Predzhuvalny icons in the dispatcher of attachments add to the number of problems. Besides, there you can make out technical data about all the attachments of the computer.

As far as the adjacent information icons are not displayed in the attachment manager, it means that all attachments of the computer operate in normal mode.

How to display Windows Addiction Manager? Pochatkіvtsі koristuvachі without zusil vporayutsya with the whole problem. There are many ways to go to the Attachment Manager without the need for an operating system. There are many ways to go for the operating systems Windows 10, Windows 8.1, Windows 8, Windows 7.

Yak vidkriti Attachment dispatcher behind the aid of the Viconati command

In this way, you can open the Attachment Manager in Windows 7, Windows 8, Windows 8.1, Windows 10.

To start the Attachment Manager, go through the next steps:

To launch the Viconati window, press one hour on the Win + R keyboards.
In the "View" field, enter the command: "devmgmt.msc" (without legs), and then click on the "OK" button.
When you write, see the "Attachments Manager" window.

Yak vidkriti Attachment manager in the command row

For the help of the command row, you can view the Attachment Manager, introduced by a similar command, like in the foreground. Yaksho vi do not know command line on your Windows 10 video, read the article.

Run the command line be yak in a manual way, For example, having entered in the field "Post in Windows" viraz: "cmd" (without paws).

At the command line interpreter window, enter the command: "devmgmt.msc" (without legs), and then press the "Enter" button.

Launching Attachment Manager in Windows PowerShell

The Attachment Manager is easy to run in Windows PowerShell with the help of a similar command. Start PowerShell, enter the command: "devmgmt.msc" (without legs), and then press the "Enter" button.

View of the Attachment Manager from the "Keruvannya computer" window

Daniy sposib for opening the dispatcher of the plant for all operators Windows systems.

When adjusting the operating system for the changes, there is no sign "Tsey computer" (My computer, Computer) on the Work table. To that, there are a lot of koristuvachiv for efficiency in robots, independently add the icon "My computer" to the Windows Robotic style. Read yak tse zrobiti.

click right button Misha by the icon "Tsey computer" (My computer, Computer).
In the context menu, click on the "Management" item.
At the window "Keruvannya computer", in the distribution "Keruvannya computer ( local computer) ", In the list of" Service programs ", click on the" Attachment manager ".

The other ways to get to the "Keruvannya by the computer" can be from the menu of the "Start" button by vibrating the menu item "Control", or for the help of the dialogue window "Viconati", by sending a message to the command: "compmgmt.msc" (without paws).

Launching the Attachment Manager from the system authorities

In order to make the most of the speedy way to get familiar with the icon "Tsey computer" (My computer, Computer) on the Work table.

Click the right mouse button on the icon "Tsey computer" (My computer, Computer), in the context menu, select the item "Power".
At the "System" window, click on the item "Attachments dispatcher".

Yak Vidkriti Attachment Manager from Control Panel

An easy way to enter the Attachment Manager, behind the additional Windows Control Panel.

Go to the Control Panel from the "Start" menu (in Windows 10, in the "Post to Windows" field, enter the "Control Panel" entry).
At the window "All elements of the control panel", in the display mode " other icons", Viberit" Attachment manager ".

Yak vidkriti Attachment manager for an additional joke

An even simpler way to open the Attachment Manager on a computer, for an additional function, click from the "Start" menu in the Windows operating system.

Windows 10 has a buzz on the panel, close to the Start button. However, you can launch a message in Windows 10 from the Start menu. Click the right mouse button on the "Start" menu, select the "Move" item.

Enter the "add-on manager" viraz in the Windows window.
Launch the Attachment Manager on the computer.

Tsey sposib pratsyuє in all Windows operating systems.

Yak Vidkriti Addiction Manager in Windows 10

In the Windows 10 operating system, it is even easy to launch the Add-on Manager without the front from the Start menu.

Click the right mouse button on the "Start" menu, select "Attachments Manager" from the context menu.

The annex dispatcher on Windows 10 will be open.

Yak Vidkriti Attachment Manager in Windows 8.1

In the Windows 8.1 operating system, the Start menu has been added, in which there is a possibility to launch the Attachment Manager equipment.

For the Attachment Manager wiki, you need to click the right mouse button on the Start menu, and in the context menu, vibrate Attachment Manager.

The first way: click on the keys "Win" + "X", and at the bottom, start the Attachment Manager.

Yak Vidkriti Attachment Manager in Windows 8

In the Attachment Manager, in the Windows 8 operating system, you can use the additional keyboard keys.

For a one-hour onslaught on the keys "Win" + "X", see if you need to hit on the item "Attachments Dispatcher".

Pislya tsiogo, Attachment dispatcher will be sent to Robochiy Windows tables 8.

Launching Attachment Manager from the Windows folder

At the end of the day, I’ll take one simpler way. As soon as you try not to be successful, you can try to open the Attachment Manager without a folder with the Windows operating system.

Go to system disk"C:", open the "Windows" folder, and then the "System32" folder.
At the father of "System32" know the utility of devmgmt (devmgmt.msc), and then click twice with the left button of Misha on the complement.

The Windows Add-on Manager will start on the computer.

visnovka statti

If there are any problems, in the operating systems Windows 10, Windows 8.1, Windows 8, Windows 7, you can see the Manager of the plant for additional new methods.

The attachment dispatcher can be displayed in just a few ways. The processing of the procedure can be carried out through the text from the field records. Alone, only "Administrator" can bring any changes to the attachment.

Viclikati annex dispatcher can:

For the additional Windows interface;
Vikoristovuchi command row;
Through "Keruvannya computer";
Vikoristovuchi added access;

There are many options available to you, and you can choose the most suitable one for you.

Run on Windows 10

In Windows 10, the rozrobniki have already cleaned up the standard function of the remote control wiping through the menu of the head icon "My computer" and made everything more efficiently.

Through the interface Windows 7, 8

It is easy to go to the attachment manager (DU) in Windows, for which you will need a little awkward diy, but itself:

Run on Windows XP

On older systems, in XP, the dispatcher is launched in a different way. Let's pick two options for launching the remote control through the standard OS interface.

First option:

Another option:

Command row

For whom everything will be in an offensive order:

Through the window "Keruvannya by a computer"

Now let's look at one easy way, how to know and display on computers or notebooks the attachment manager. The way is the same for Windows 7, as well as for Vista. It is necessary to visit:

The robot is fooled regional record"Administrator", then there will be images in the center of the screen;
Yaksho vikonano enter z-pid with a regional record of a koristuvach, then required tab I will see it in the mode and look at it, so yak Daniy Koristuvach through the lack of privileges, one cannot make a change;

At the visitor's office, you can also go outside the command line. To do this, you need to enter the "Viconati" row and enter the "mmc compmgmt.msc" command in the field. In order to make it necessary, it is necessary to build everything up in connection with the procedure.

Via a remote computer

To see if there is a remote control and how to see it from a remote computer, Needed:

Go to the section "Keruvannya computer" with one of the best ways.
Know the menu "Diya" and select the item "Connect to your computer".
At the "Vibrati computer" window, develop one of the lower proponents:
In the field "INSHY COMPUTER" write the name of the PC, to which access is required, and press "OK";
Natisnіt "Oglyad / Dodatkovo" and know the necessary pristіy.
Viber yo and press "OK"

A successful connection to the left upper codend will be displayed on the PC.

Dal, to go to the remote control, speed up one of the best ways. Uwaga! At the vipadku from vіddalenim PC access nadaєnno viklyuchno in the mode of viewing. Tobto, you cannot change the parameters of the annexes.

Robot with a dispatcher

In pershu chergu, wine is required for managing the installed drivers, so you can also know need information about be-like installed annex. Zovnishny viglyad Utilization of three changes in the amount of XP and 10, but the functionality has changed.

The main distribution is stored in the list of headings, which can be changed by clicking on the structure of the name. For what a list of connected elements to the computer will be displayed. For example, in the category "Videoadapters" there will be video cards (called or internal), if you have 2 connected video cards, then all doors will be displayed.

The dispatcher of the possession allows you to reconfigure and update the drivers of the connected attachments that have been introduced by the system. The whole systemic tool often appears to be corny when diagnosing irregularities, because of those, as the dispatcher of attachments sees, it will be corny to all criminals.

Windows interface

samiy shvidky way turn on the attachment manager - press the right mouse button on the "Computer" end and vibrate the "Control" item in the context menu. At the window "Computer control" in the menu, select "Attachments manager".

You can take three steps and start the dispatcher through the "Control Panel":

If there is a way not to go, try the viclikati manager of the possession directly from the folder "system32". Not important, as you have installed the system: XP, Windows 7 or "ten". Send the file to the tool for robots from the possession to be left unaware.

The dispatcher will appear on the screen, and you can make sure that programmatically secure connected attachments.

Viconati Menu

Another way, for all, without a blame Windows versions(From XP to Windows 10) fields in the Viconati window, as you can view it via Start or run Win + R as an alternative.

Through Viconati, you can turn on whether programs, system tools, or folders - you need to deprive the correct launch command.

Vikoristannya command row

Immediately start the attachment manager from the command row. You will need to see a selection of commands by yourself. On Windows XP, for example, it is necessary to use the Start menu, de middle standard programsє command row.

On older versions of Windows, you can run faster in a row For example, let's set the menu item "Viconati" by adding "cmd" to the new power supply. Besides, the command line є systemic supplement, The viconavchy file which is stored in the "system32" folder in the "Windows" directory. Go here and click on the cmd.exe file, then go to the robot with the Windows command interpreter.

To open the dispatcher's possession through the command row, you need to enter the same command as in the “Viconati” window - “devmgmt.msc”. By pushing the Enter key, a list of all connected annexes will appear, with which you can try.

Win + X menu

Windows 8 has a new navigation menu for system tools, Yake wiklikє Win + X. In in front versions The whole menu is not practical, but it was saved in the "ten", so you can click the right button on the "Start" button.

At the context menu Win + X, in addition to the current one, є pushing the attachment manager - click on it, push the list of connected ownership on the screen.

Introduction of changes to the register

The first method describes how to launch the owner dispatcher through the "Control" section of the "Computer" context menu. If you make small changes to the re-structure, then you will not be able to see "Keruvannya" - the "Attachments Manager" item will be immediately displayed in the context menu:

Pislya vikonannya tsikh diy in the context menu "Computer" instructed with the tool "Manage" to report to the dispatcher of possession, which you can, if necessary, register.

At the computers, like in the army, the commanders of the head commander (processor) are guilty of being promptly and clearly. Systemic and peripheral units in the PC warehouse are going well, the skin has been given the task and the necessary resources for a successful presentation have been set. The axis is the only one in the army for the mutual fashion of the other families, the operational headquarters is to be stitched, and in the personal computer and the function of the vicon is the manager of the Windows add-ons.

Wiklikєmo Addon Manager for Windows 7

Attachment manager - tse special program Allows you to use the Microsoft Management Console (MMC), which was first introduced in Windows 95. For the help of the dispatcher, you can look at all the settings on the PC add-ons, review information about the management and resources, and include carry out manipulation with the drivers.

Victory in annex dispatcher can be done in the following ways:

vikoristovuchi panel Windows management;
through the command row or "Viconati";
behind the additional interface of the OS itself.

Oskіlki formally the dispatcher will be installed in the control panel, then for the wiklik we will need to see the panel:

You can do without a joke. For the whole it is necessary in the control panel to vibrate the “System and Bezpeka” distribution and go to the “Attachment Manager” menu item in the “System” section.

You can also run the console snap-in through the "Keruvannya computer" window.

You can also run the dispatcher by clicking it on the іm'ya file. For the whole need of all the more wickedness in "Viconati" (Win + R), write to the new devmgmt.msc and press the OK button. For the help of іnshy hot keys- Win + Pause - you can click the "System" window of the Windows control panel, in which case you can also start the add-on manager.

Showy prikhovane possession in annex dispatcher

At the dispatcher's graphical view, the information of the Microsoft control console about the possession, installed on a personal computer or a laptop, is presented. Attachments in the list can be grouped either by type or by connection. Change the principle of ugrupovannya is possible by vibrating the top item in the "View" menu.

Windows 7 Addon Manager provides information about ownership installed on a personal computer

Attachments that are not recognized by the system (for example, as far as they are installed drivers) Above all, for good measure, signified by a tricot worker, by a sign of a hail from the middle.

However, in the standard view, the attachment manager does not display everything as it is owned, even in the system there can be present and so called attached attachments. One of the characteristic types of similar possession is an attachment with already installed earlier drivers, which are connected at once. In order to look at the attached attachments, go to the "View" menu of the dispatcher and check the box "Show attached attachments".

Є with visualized attached attachments and another small, albeit important nuance... The manager of the annexes has received information about quiet earlier installed annexes oh, yak on Danish moment enabled (enabled physically, enabled in BIOS, etc.). For the appearance of a certain kind of possession, the change of DEVMGR_SHOW_NONPRESENT_DEVICES is displayed. If it is assigned the value 0, then there will be no attachment to the koristuvachev. Before the launch of the MMC console, there is a significant change in the library devmgr.dll. As soon as possible, some kind of annex-primari can become the cause of conflicts with other possessions. So, when establishing a new hedgehog picture the system can tell you about the IP-address conflict with the controller, for example, standing in the given PC, you were in the past. Check in the attachment dispatcher of the data about the provisions, albeit included in the given hour of possession, see the beginning of the season:

Nadal ci dvi commands can be issued in a bat-file in the viewer, so you can easily make it easier to launch the attachment manager with the parameters you need.

I do not see the attachment manager

In some cases, there are problems when the dispatcher of the attachments is called out of the methods described in the description. Win may simply not be launched, for wines are victorious, but a signal about the development of pardons. In the overwhelming majority of cases, such a behavior of the operating system and viciously inherited from robotic computer viruses. Boom and so, the files of the attachment manager on the disk are buried or out of the way, but they can also be accessed by malicious attacks on your PC. In any case, if you are in the first place, you will be guilty of converting your computer to the appearance of viruses and how to appear like that, get around them. As soon as you have not established anti-virus software It is recommended that you use it to be portable, permanently update and use Dr.Web and reconfigure your PC to help you.

If the problem with launching the dispatcher does not get overwhelmed by the cleansing of the viruses, speed up the OS with the power of the OS to give a pardon and update the software system files... For whom you will need a viconati:

You can independently change the appearance of the necessary files in the System32 file of your OS. If you have problems with starting the attachment manager, you can change the file devmgmt.msc itself on the disk, as well as the devmgmr.dll, msxml3.dll, msxml6.dll and other libraries. Whenever you are on the go clogging disc LiveCD and I'll hand you copy from Windows distribution 7.

Typical problems with robots with an attachment dispatcher

If you want to successfully launch the attachment manager, you can get lost in low problems with robots. For example, you will not need an attachment to be available to a wide list, the dispatcher will not be able to see the new configuration of the possession, or else the dispatcher will appear completely empty. Podolati and inappropriate moments to help our joy.

Empty annex dispatcher

There are a number of main reasons, through the window of the dispatcher, there can be a pristine bliss.

Shvidshe for everything, in all knowledge can be winnі shkіdlivі viruses, for example,. In this case, scan your PC anti-virus scanner and forget about the non-fancy "guests". For the Apropos virus by ourselves forgive decisions will be victorious utilities. Lock your computer into Safe Mode, unpack the AproposFix files from the archive and run the RunThis.bat file. If the procedure for seeing viruses is completed, the program will write a log file to the disk, and everything that has been found and corrected (or if it is seen) will be destroyed.

Another reason for an empty annex dispatcher can be connected system service Plug & Play, as a result of the distribution of changes in the established possession. Turn on the service, it is necessary to turn on the close crochet.

In addition, you may have incorrectly set up access to records that describe the attachments in the system registry. For usunennya tsієї problems and you will need to run the editor of the register і viconati such dії:

Yak vchiniti, yakscho bulo vyavlenno vyavleno pristriy

Windows is invisible, whether it is possessed, before the driver is visible, for example, there are no meanings for the current version of the system, for the OS will not be able to recognize the identifier code, which will be included in the Plug & Play standard. Most of the foldable and storage annexes are often unavailable to use USB standardsі IEEE 1394 і do not accept either one of the options for Windows і accept the class system.

Such pristіy is recognized in the dispatcher with a special pictogram - a sign of a hail in the tricycle.

Invisible attachments are indicated by a special pictogram at the sight of a sign of a hail on the background

Windows OS has worked and recognized the attached settings, it is necessary to install the driver in a general order, speeding up either as the center of the update, or having downloaded the installer package independently from the site of the possession virobnik. For the whole, clicking on the unattended possession of the right mouse button, vibrate from the menu display the "Update driver" item and follow the system prompts.

Video: how to install the driver through the add-on manager

If you don’t know what to do with attaching and deceiving for a new driver, try to jot down the required software for a possession identifier.

Video: how to know the driver for the ID I will attach

Problems in Robot USB Ports

Oskilki USB controller, as if it were in possession, in conjunction with the OS for the additional driver required drivers from disk mother's pay.

As soon as you install the drivers, everything is in order, or if your computer has stopped from starting the USB-attachment, you can help you to re-install the system. Restart the computer in the wake-up mode. At the high level of immobility, you can let it go, but for a restart, the inappropriateness is not without a trace.

In addition, if there is no reason to be re-entangled for some reason or not, it’s not bad (admittedly, if you do not want to trivialize, you don’t want to re-privatize), you can hurry up by the attachment manager for a delicate “re-entrant” (restarting the driver).

In one more way, it is possible to change the way of doing things, by visualizing and then rearranging the USB controllers.

As soon as you take it into your own account, you know how to do it correctly and without any ruinous inheritance for the PC. Windows registry You can try one more option to correct the pardon, so you can get around the problems with USB ports. To run it from the Start menu, or else, for the help of the Viconati window (Win + R), wipe the editor to the regedit register and visit the new start:

At the dispatchers of the annexes of the external ports COM and LPT

In some cases, you can adjust the parameters of the last COM port (for example, if you want to connect the programmer to the computer, or the specialization promisloviy controller), and then it was distributed, so it’s itself, and it’s itself, you can see it in the dispatcher. Slid to mean that in modern computers Particularly in laptops and netbooks, COM and LPT ports can be used to pay attention to the motherboard for unpopularity. Shukany ports can be included in the BIOS and cannot be displayed in the dispatcher. If you want to speed up the COM or LPT port, go into the BIOS and enable the type of ownership. Uninstall bude perekonatisya, the driver for the motherboard of your computer is installed and located in current country.

As soon as they were overwhelmed, they didn’t help them, because it’s possible for the primus to set up the port from the annex dispatcher himself. For a person it is necessary:

In the "Diya" menu, vibrate the item "Set the old settings".
To install all ports, select the item "Install old attachments"
Vibraєmo necessary type of possession.
The list of types has a vibramo row "Porti (COM and LPT)"
Vibiraєmo necessary port.
Assigned, which port we need to install: last (COM) or parallel (LPT, printer port)
If necessary, you will immediately appear in the dispatcher of the annex to the port.
It’s too late for the driver.

No connections found to PC printer

Before you switch between the printer, the connection to the PC is physically... Reverse the cord itself, as well as the standard of roses on the printer and the motherboard. As the printer is visible in the dispatcher, it can be seen in the section of the control panel "Attachments and printers" USB bus... A similar problem can be squeezed by the way of connecting the printer not without the front to the PC, but through a USB hub with additional hacks on the port. Yaksho vi pratsyuєte on the laptop, varto podbati about those schob USB controller Do not turn off the switch when switching to energy saving mode. For more, it will be necessary to fence Windows to control the electrical connections of the USB controller, but the OS did not include the price of its possession in case of idle time due to the economy of energy.

Check the box to allow the system to plug in the USB controller for power saving

If your printer accepts the Plug and Play standard, if you do not connect it to the attachment manager in the "Printer" section, switch between the plug-and-play attachments. The driver for the printer can be angry, and the dispatcher now simply cannot identify correctly. Reinstall the drivers and re-install the computer.

As soon as you get used to it, you are old enough to use an attachment, which does not adapt to the standard, it’s next to the memory, but the dispatcher will attach it for the change in vvazhaє so possession of prikhovanim. To show in the tree of the attached attachments of the same type, select the checkbox "Show attached attachments" in the "View" menu. For whom, joke about the information about the printer in the "Drivers of non-self-configurable attachments" section.

Information about printers that do not accept the Plug & Play standard can be found in the section "Drivers for non-self-configurable attachments"

How robiti, as a monitor to develop, as a universal

Modern monitors in a large number of types are designed using the "Universal PnP Monitor" system and do not require installation of special drivers. And the axis for the elderly monitors can be a problem. Often Windows will install a "Standard Driver for Supports (VGA)" for them. However, the mode may not adjust the monitor to the main, or the frequency of the jogging, which makes the computer unpredictable. The name of the monitor is incorrect to start, as no one has installed a driver for the video adapter.

For many modern monitors, a standard driver is enough, but with older models, it may not be correct

In order to stand up required driver monitor, lock the computer at ovenless mode... See the video card driver and re-install the computer again. The system is guilty of re-recognizing your monitor, so that you can reinstall the drivers for the video adapter.

As long as your monitor accepts several ways to connect to a PC, try this one the other way, for example, select the HDMI port to replace DVI or connect a DVI rose from a PC via an adapter to a VGA rose.

In some unwisely clear-cut monitor without native drivers

Missing drive from addon manager

If you are using an IDE or a SATA floppy drive, you should change it correctly, it should be correctly displayed in the BIOS window. The visibility of the drive is adjusted BIOS may be overwhelmed by the disgusting connection to the live cable, the lack of power input to the living unit, or to use an incorrect combination of jumper (jumper) Master / Slave, which connect the roles to one As the floppy drive appears in the BIOS, see and reinstall the IDE / ATAPI drivers:

If the driver is re-installed, it will be installed automatically.

As soon as you are using the internal USB drive, go to the site of the motherboard virobnik, add new ones and install the best drivers for your model of the USB controller wired into the chipset. Varto respect that, in some circumstances, problems with a PC cannot be interconnected with a disk drive, nor will there be any flash-accumulators and attachments that can be connected via a universal last bus.

You can use third-party software for robots with CD and DVD storage (utilities for burning discs, launching virtual drives in systems, etc.). Uninstall from your PC this program and re-install the computer. As soon as the encampment is not polished, try to clean the register of all the changes they can make by hand. For Tsiogo:

Video: how to update the floppy drive in the windows 7 add-on manager

Attachment manager do not store video cards

Yakby, your graphic card did not work, it’s unlikely that they poked at the end of the annex dispatcher. It is possible, the system simply could not know the required drivers and so the video card was assigned as standard VGA video adapter... Know the whole row in the dispatcher and update the driver for the attachment, having downloaded the version from the virobnik's website in advance, which is designated for your operating system. Varto memory, for NVidia video cards drivers are developed for video adapters of desktop computers and graphic cards, which can be installed in laptops. For the rest, joke the drivers with the letter "M" in the kit of the series (for example, NVidia 9600M Series, not NVidia GeForce 9600 Series).

In addition, varto perekonatisya, scho in the dispatcher in the daytime unavailable annexes... For example, driver nVIDIA video cards On Sony laptops, it may not be installed correctly, if the SFEP driver is not installed in the system (the Sony Firmware Extension Parser cannot be installed in the dispatcher).

In the event of an incorrect driver installation, the video adapter appears as a standard one, and in the "Іnshі attachments" section there are unrecognized objects

As soon as in the PC configuration, a discrete graphic card is installed in the presence, one of the video adapters is included in the display as there are no preferences. In general, install the required driver from the disk with a video card or download it from the Internet. In the case of two video adapters, one of them can be physically connected, as a result of which it is shown in the dispatcher. Change what is included in the BIOS integrated video or PCI-E graphics card. You can choose an operation with a software path, with a NVIDIA control panel, or Catalyst Control Center. As soon as the video adapter is displayed, notify it and appear in the dispatcher.

If the video adapter has been adjusted normally, it functions without pardons and has disappeared quickly, try to update the system to the point of renewal, in which everything is in order.

Do not panicuvati, as the one video adapter was turned on from the annex dispatcher and your screen went out. Restart the computer in Safe Mode and re-enable the video adapter in the dispatcher. Yakshcho in the configuration є wired and discrete video card, s by BIOS you can switch the prist_y, on the yak will be the first picture of the image.

Do a lot of other helpers also discount BIOS up to the value for zamovchuvannyam.

The annex manager, madly, is necessary for the control of the computer. Without a new one, you will not be able to establish a proper rank, to develop the potential of your PC to the maximum. Locking up the OS robots without any pardons and villotes є adjusting the drivers in the rear annexes in the current state, including the unnecessary installation and reinstalling the problem components. Windows Addiction Manager can help you.

If you need a term for all kinds of things, you need to have a complete possession and a hardware security on your computer, and if you do not want to pick up a PC, then Windows 7 will help you to dispose of a computer. quickly and at the same time provide the koristuvach with information about the characteristics of the possession of the country. Described below different ways starting the remote control.

Well, what is the main purpose of the control system?

The utility, which can be used to enter the Windows warehouse, is intended for controlling PC add-ons and controlling robots. On food, which often won’t be victorious by the masters of personal computers, it’s obvious.

To that, the program allows you to create an analysis any problemsі the appearance of a pardon in their functions, as well as a quick correction, for example, the update of the drivers in the add-ons or the vibrating switch-on і turn on any of them, you want to be able to get confused in your PC

The interface is simple programs and is a window to the turn of possession, grouped for parts.

All children in the DU can vikonuvati, vikoristoyuchi Misha, for example, go to be-as-like distribution with a sub-key, manage the outbuildings through context not menu, Viklikan not clicked by PKM, etc.

Likewise, the Dispatcher will display the views about the exact names of the equipment, if there are problems with the functions, then the name will display a new icon with the symbol "!" or "?"

The launch of the attachment manager is a safe way of usuning the problems that are connected from the PZ possession. In the English version of "Simka" DU is "Device Manager".

Knowing the algorithms for starting the remote control, navit the ear of the corystuvach, you can quickly change it in any modification of Windows 7.