How to decode tricolor tv channels yourself. Freebie and digital TV will turn off 5000 tricolor receivers

Why?

I think that everyone already knows that Tricolor TV is a place for freebies ... a free opportunity to watch almost all channels.

And so ... the topic is relevant and therefore I have collected all the possibilities about this topic. Let's start with a plugin that solves a lot of questions ...

First option…

Actions…

WE INSTALL AS A NORMAL PLUGIN THROUGH A USB FLASH DRIVE. All plugins must be stopped before installing.
We throw the attached file keydata to the keys folder and run the plugin.
AND ENJOY VIEWING THE TRICOLOR PACKAGE (HD CHANNELS DO NOT WORK)

plugin.rar…. take:

keydata.rar .... we take:

Keys path \\ plugin \\ var \\ tuxbox \\ config
e36.bin or e56.bin

However ... Tricolor TV now works on Oscam and Vikard, but every day you need to change the keys for them ....

The second option ...

Tricolor and without an access card? Does that happen?

Yes, sometimes …
First you need to install the emulator oscam (if it was not installed earlier). A special version of the oscam emulator has been developed to emulate the DRE (Tricolor) encoding.

Here is the assembly of Oskam, Itself updates the keys.
plugin.zip…. we take:
Install from a USB flash drive. After rebooting, install DRE, then start au off au again au, and only then oscamdre on…. the keys are fresh.

Specifically about this topic ...

The third option

Gold Wafer cards ... (very suitable for Dreambox)

The card contains a peak controller microcircuit such as PIC16F84 and an EEPROM memory microcircuit such as 24C16.
In fact, these are exactly the same cards.

A firmware for this card has appeared in the public, which emulates the official map of the tricolor 13 series.

It opens the same as the oscam_dre emulator, but the card has AU (auto update), i.e. there is no need to update the ee.bin key file every week.

In addition, the card can be used in those tuners that do not have an emulator.

Video encoding technology has become one of the most promising for implementation in mass broadcasting. In Russia, this process was launched back in 2007-2008, through the phased introduction of multiplexes - packages of TV channels, which can be viewed through a receiver. The so-called first and second program blocks, according to the law, are generally available, which does not cause resistance in their broadcasting from market operators due to the lack of commercial benefits. The massive reduction of this package of channels (on a "legal" basis by one of the industry leaders) led to the fact that subscribers began to look for all available ways to watch Tricolor TV for free. The company has more than 50% of the audience that such measures will hit hard.

What is available to the client?

As already mentioned, at the state level, a list of two multiplexes (in total - 20 channels) has been approved, which all digital television operators are required to broadcast without restrictions (encoding). In fact, the subscriber has access on a general basis to only 8 channels (information, promo, TV-TV, TV2-TV). The rest become available only on the condition of an annual subscription to one of the existing service packages (Single, Single Multi, Children's, etc.). Such pleasure will cost 1200-4600 rubles. per year, that is, about 100-380 rubles. per month, which is another unpleasant surprise from the market monopolist. Moreover, the company's policy is such that previous merits and long years of cooperation with the operator are not taken into account, and the subscriber is immediately disconnected if the bill is not paid.

Freebie search

Watching channels both for free and for money is possible only if you have a receiver / set-top box. It receives a digital signal, and a built-in or complete module (CI +, CAM) deals with its decoding. Therefore, the root cause of the problems and possible solutions must be sought in these two components.

At the moment, there are several options for action, liberal or not entirely in relation to the operator itself.

Replacing the receiver with a new one... This approach is massively practiced by the company itself, as the only correct one. The fact is that pirates periodically break into the protection of receivers, leaving the operator out of work. The latter, in turn, adopts new samples, offering customers to exchange old ones at a surcharge or at cost, continuing to watch on the same terms. Thus, a network of pirated equipment is excluded and an additional source of income for the operator appears.

Exchange of the receiver for a third party... In essence, this means abandoning the company's services and moving to another one with the replacement of equipment. Armed with statistics, it becomes clear that the other five largest operators of the digital market collectively barely reach the market share that the leader covers. Accordingly, to expand the audience, they can offer much more interesting and flexible terms of cooperation.

Pirate software... Most of the company's clients do not mind watching their favorite channels for free. In this case, the Internet becomes the first assistant, where you can find various user / pirated plugins, the installation of which removes restrictions.

Cardsharing... This term hides in itself a kind of compilation of free and official approaches. The fact is that one receiver is designed for one TV, and if there are several of them in the house, then you will have to fork out for several receivers. An alternative is the OSCam emulator, which allows you to distribute the view over multiple points.

Flashing... Another option would be to use third-party cards such as GoldWafer. They are perfect for receivers like Dreambox, emulating official cards. Among the obvious advantages of this approach, one can single out the lack of constant updates and viewing TV channels on tuners without emulation. The only drawback is the rather high price.

Using the operator's official offers or organizing free viewing by not entirely legal methods is a purely personal decision of each subscriber, which not least depends on the family and corporate budget.

At first, they lured, and now they milk mainly pensioners to the fullest. And who are they after that. Article +. More of them with more detailed diagrams.

i am a pensioner using the tricolor for 5 months, and I pay in full. there are no discounts for such a case and I constantly see that there is no signal, then some errors and you need to wait 8 hours for the image to appear. Maybe it's enough to milk pensioners?

Boundless impudence. I paid for the annual Tricolor subscription through Euroset. Looked 3 months and turned off. Balance 0. Began to understand. Interestingly, both in Euroset and in Tricolor they shout with one voice that there was no payment. I ask, how did I watch for 3 months? The tricolor replied that there was a program failure. Is this already a world conspiracy? I was disappointed in the tricolor (I write specially with a small letter)

The tricolor was a terrible disappointment. The subscription time has not expired, and I have already been disconnected. The operator insists by force: buy another receiver from us, yours is outdated !!! I understood that these crooks are making money to replace the receivers ... In memory of these crooks, there is a plate on the wall ...

The operator is not bad. But damn, how many good channels have been thrown out of the package. That there’s nothing to watch. And the price is beating do God. It seems that 1500 is not expensive. But there’s nothing to watch. It's simpler and better than Rostelecom or MTS. A little more expensive, but there are more channels.

Yes, this tricolor got everyone! The most offensive thing is that everyone complains, but few refuse it. If the people were teachable, the tricolor would have become free for a long time. Or almost free. Give up everything from this Mr., and everyone will be happy!

For retirees, you ask a question about the doiki of retirees to the Kremlin, Putin and also get a fig. In fact, block all free channels in the channel editor, since the command to disconnect comes from them basically zero channel. To block in the settings, create a PIN. At the very beginning of the procedure, pull out the wire from the receiver, reset the settings to the factory settings. Further as described above. And watch TV more often so that the activation keys do not disappear. In general, we have a madhouse everywhere, not only with satellite.

Why did this question arise? Here it is not worth guessing whether the time has not come or has come.

Leave Dre 5000 or change to GS B 211? photo # 1

But for calmness and understanding, let's see clearly which receiver shows how and how these receivers look together. We hope that we will help some of you in any way in this review and in our video, which you can watch if you are interested.

Leave Dre 5000 or change to GS B 211? photo # 2

We take our favorite test TVs, you have probably already seen, if not, be sure to check them out, we have a lot of them and which one of them will probably be of interest to you.

Leave Dre 5000 or change to GS B 211? photo # 3

But now we will see how the Dre 5000 and GS B 211 receivers will work, one receiver has long been out of production, and the second already takes its place in the niche of satellite digital equipment from the operator.

Leave Dre 5000 or change to GS B 211? photo # 4

As soon as we turn it on, you can immediately understand that something is wrong in one receiver. And this "not that" is manifested in different faces.

Leave Dre 5000 or change to GS B 211? photo # 5

The fact that the picture is processed a little differently and there is a delay is not so critical as to say based on this that one is better than the other or that it is urgent to change. It is early!

Leave Dre 5000 or change to GS B 211? photo # 6

There are other, more important and more interesting points, we will not say that one is more technologically advanced, more environmentally friendly or more "cooler" in this review. There are a lot of similar articles on the Internet, but which one shows better and which pleases more eyes ... You can talk about this.

Leave Dre 5000 or change to GS B 211? photo # 7

For example, we can say that one receiver, that the other of course there are moments and they can think. It is a fact. But, the plant says that the receivers can think, but not too long.

Let's see what kind of menu the receivers have and how receivers switch and work in the menu.

Leave Dre 5000 or change to GS B 211? photo # 9

Well, it's quite worthy, over the years since the release of the Dre 5000 receiver, programmers pulled out everything they could and sharpened, the once dull receiver into a working machine, and if it were not for problems with the encoding (these are not hardware questions), then quite an excellent car.

Leave Dre 5000 or change to GS B 211? photo # 10

But this is in theory, but in practice look at the small print at the bottom of the screens, on one of them it is so bad that a person with good eyesight is not pleasant and uninteresting to read it, because it diffuses and dissolves on the screen.

Leave Dre 5000 or change to GS B 211? photo №11

And if you look at the number of TV channels! In one, they are minuscule in comparison with the other. And this factor is especially strong now,. And if the price is one, it is not interesting to pay a lot for something that does not show anything.

Leave Dre 5000 or change to GS B 211? photo # 12

So we went through the pictures, now it became more or less clear, you already have an understanding and now let's fix it all.

Watch the video in full and confirm what you saw in our photos.

If you want to buy a dre 5000 receiver, then you will be interested to know as much as possible about it. Our article will provide you with the information you need.

The Tricolor receiver dre 5000 is in particular demand among the operator's subscribers. The set-top box supports dre conditional access with the ability to work in the network of this operator. It is fully customizable for the Tricolor, which provides maximum ease of direct use.

Unlike its predecessor in the 4000, the dre 5000 stands out for its updated housing. Due to this, it looks as attractive as possible, and this fact significantly distinguishes it from the background of many other consoles.

The dre 5000 satellite receiver has a 7-segment and 4-digit display. It displays all the basic operating parameters of this device and can be easily controlled by the attachment.

That is, the Tricolor TV receiver of the dre 5000 model has the best combination of price and quality and will be able to ensure full operation.

Additional features of the dre 5000 and 7300

A very attractive price is provided for the Tricolor dre 5000 receiver.
It will cost you significantly less than all possible analogues, and this will be a significant purchase advantage. When purchasing from the operator itself, the price is completely reduced to very small values, because the company makes discounts to its subscribers.

Some other features of the presented model:

• The device can receive a signal in DVB-S / QSPK.
• Can be used with motorized antennas.
• The device memory is designed for 5000 channels.
• Sufficiently powerful processor and full-fledged signal processing.
• Channel number indicator you are currently on.

But there is a similar receiver called dre 7300. Another device number speaks of originality, but in fact the 7300 is completely identical to its brother. It is produced in the same plant, according to the same scheme. The 7300 is no different, so don't think of it as a standalone device.

The set-top box has wide control capabilities and can be configured for each specific TV. The menu and interface are completely executed in Russian, and you will not have any problems with control.

Sharing consoles

Naturally, many people were interested in the sharing of the dre 5000. This procedure is very popular among users and provides many possibilities. As a result of hacking, you do not need to buy access from the operator itself, and this will become a significant plus for the owner.

What sharing gives:

• You get full access to all channels without having to shell out huge amounts for a subscription.
• Various TV packages can be viewed.
• The number of available programs is increasing significantly.

The procedure is carried out by gaining access to a specialized server. But remember that it is far from free, and you will have to pay a certain amount for access to the service. Usually it is a few cents a day, which is several times less than the company itself.

October 2012. During the week, 15 pieces of GS-8300 were brought with dead power supplies, right up to blown up tracks, cracked PCB and burnt SMD resistors.

hover your mouse over the image to enlarge it

How everything happened is clear - the electrolytic or oxide capacitor at the input (C5) dries up, gives ripples, but so far everything works. The transistor of the primary winding of the transformer (Q1) overheats, SMD parts burn out around it, the board tracks crack and the power supply becomes faulty.

Native power supplies ran out long ago, and GS-8300 receivers kept coming and going. Of course, repair was possible by fusing tracks, installing jumpers, soldering parts - in short, it was possible to restore the power supply from the ashes and at the same time it would work properly, although the work did not look very aesthetically pleasing and the client was better off not seeing the result of the master's actions. And, of course, it took a lot of time to repair each unit.

Therefore, I went the other way - I took it and adapted it for the GS-8300 receiver, but I'll just make a reservation that there are several models of power supplies for the DRE-5000, the left one is suitable in the photo below - it is also the most common (the right one in the image does not pass in height )

Pinout of DRE-500 and GS-8300 connectors

No. DRE-5000 GS-8300

So, what needs to be redone in the block is to remove the 8th and 10th wires from the block and cut them off from the power supply unit itself (we do not throw out one of them, it will be useful to us later), cut off the place of the block for the 10th wire with a knife, total our connector has become 9-pin, the 7th wire is rearranged into slot 8, the cut wire is inserted into slot 7 and soldered to wire 6. Total - we get the GS-8300 connector, although instead of 24V we will have 22V, but this insignificant and tested over the years - does not affect the result.

Further, mechanical adjustment of the power supply unit - we break out the place for the com port socket with pliers, with the same tool we reduce the block length by 3-5 mm. And finally, we transfer the capacitor C1, making room for the power switch

We connect the network wire. We insert the block, placing an insulator - you can plastic from the bottle, fasten it with one screw, the second attachment point is a groove on the body. ready, it remains to close the lid

Thus, about 300 receivers were repaired, in two years one return - C17 was knocked out