On Samsung phones de hold button. Which button on the telephone is the most pressed? Saved number confirmation
At the distribution of food Privat. What is the role of the "FLASH" button on stationary telephones? Behind the hell! assignments by the author Oleg Kozhovy best of all transfer of a call to an additional one (as well as an automatic telephone exchange)
Vidpovid vіd Al Re[guru]
FLASH - drop / drop.
An analogue of a button, place the handset.
In voice-frequency automatic telephone exchanges (for example, offices) their functions are absolutely identical.
Ale in impulse exchanges (mayzhe all of Russia, the Crimea of Moscow (499) and other exchanges of St. Petersburg) do not press on the handset for a short time until the call is opened (you need to take a couple of seconds, otherwise there will be short beeps / silence). And the "flash" button will again cut off the sound in one onslaught (after the onslaught there will be a slightly clean beep).
Another є button REDIAL (Re: Dial) - repeat the remaining called number.
In import phones, you drop the call and dial the number again.
In Russian phones, I don’t repeat the number anymore (alternatively, you need to manually open it).
And the "morning" call (hang up the phone, and then pick up the phone on the parallel phone and continue rozmovu) - the HOLD button. After the onslaught, the indicator will light up and the voice at the pipe becomes muffled, or else the melody.
Vidpovid vіd Maverick[guru]
Victory for additional services at stations with touch-tone dialing or at office PBXs (dzvіnka retranslation only). You can win like a good line in that turn, if the FLASH trivality is on telephone set move this parameter in the line.
For the presence of the FLASH button on the telephone, it is short (0.5-0.8 sec.) to imitate the pressure on the FLASH button.
In short - you - and me - won't need it, shvidshe.
-
For example:
Utrimannya vikliku =
Servant of accusation, forgive the onslaught flash button without rozryu z'ednannya. When you can hang up the phone, the device tells you about the morning call with a short periodic signal.
Transferring a weekly to another number =
Service I will transfer the weekly call for the first hour of the call to the next number. To translate, you need to put a streaming call on the morning (by pressing the Flash button on the phone), after which you can dial the number of another subscriber, check if you have called, what is called, tell you about the translation and turn it off (place the cabin). Between subscribers who call and call, the call will be set, the phone will ring.
Trilateral congress =
This service allows you to call another subscriber for an hour of in-line work and communicate with both subscribers on a call without calling a call. Call the subscriber (A) for an hour, press the Flash button, and then dial the subscriber's number (B). Subscriber (А) at the time of calling in the "morning call" mode on the line. In order to switch between subscribers, as if the exchange of confidentiality between them is necessary, you can switch the Flash button on your phone.
HOLD button
The HOLD button allows you to set a thumbs up for the
I'm sorry for the hour.
Press the HOLD button for the hour of the call.
The display shows Hold.
The MUTE indicator blinks.
Znyatya morning.
- If the handset is on the device:
Raise the hearing aid or press the SP-PHONE button.
- If the work is done:
Press the HOLD button.
- When using a parallel phone, I connect
chenim to tієї zh linії:
Pick up the hearing aid of the parallel phone. Yakshcho utrimavshi
I am not taken, click on the important parallel phone
just a second.
FLASH button
cha roz'ednannya).
The FLASH button works the same way, as it is important
apparatus. Yakshcho Vee had mercy on the set, or they scored another
telephone number, firmly press the FLASH button. Viklik
interrupted, and there is a clear signal to the station, then we
You can dial another phone number.
Yakshcho your attachment came to the station, easy
pressing the FLASH button will allow you to select special
services of a substation, such as call forwarding
call.
Wikoristannya functions
In case of correcting this function, you need to become
subscriber
old telephone company.
1. If it's an hour later, call you another subscriber,
You hear the signal.
2. Press the FLASH button.
The first call is set to morning, and you can
reply to another weekly.
To turn to the first caller, press the button
FLASH again. Another weekly click is set to stop
nya.
MUTE button (page 23)
go svіvrozmovnika, ale vin not sensitive to you.
Press the MUTE button.
The MUTE indicator lights up.
To turn around until you move, press the MUTE button again.
Pawning phone numbers on the riddle about
help secret button
You can lay a bet on the riddle and keep the secret number
for the additional function of the secret button. Confidential
The numbers will be invisible on the display until the hour of dialing.
When storing telephone numbers in the memory
the MUTE button flashes like a secret button
Pledge for a riddle
Change, that the handset is in the socket of the device
rails are installed and the SP-PHONE indicator is off.
Push forward rank
Note:
Pressing the MUTE button once is entered by one digit.
Do you want
Dial a number
Press the button to dial the number with one press of that in the middle
ki memory, in which number is selected, which
The display will show:
(Example: Number in memory z
If you win a mini-ATS, then how is the button most likely to win? Tse - charіvna button Flash ("flash"), and today we will find out what the button is for, why it won't serve and you, maybe, know hobbies of opportunity tsієї buttons. Those about which you did not cheat before!
Also, to a mini-ATS, you can connect both standard telephone equipment and special “system” telephone equipment.
A little later, we’ll talk about secondary telephones, because such devices, as a rule, are more important, because you have a mini-ATS installed in your office.
Such devices are used by ordinary servicemen - mayzhe all the staff, top-managers and kerivniki, as well as special-purpose system telephones.
Also, on your device there are a number of dialing buttons (type 0 to 9) and a Flash button.
Also, it is more important to have more cordless mini-automatic telephone exchanges than the main telephone equipment: portable telephone handsets (office radius dії), or flat telephone equipment or fax, and other extensions are connected to the telephone line 1 for additional help. This is also called "single-line" telephones.
Stench vimagaє for pidklochennya 1 telephone linia, on the vidmin of the special alіsizhizovs, the acts of the Yaki Vimagayut for the pirkluchennya tsіlikh 2 telephone lines, and the yakshcho is the Great Head of the Bosu, the Yaki is the same in the same way , then for such a boss you may need as many as 4 telephone lines in order to connect all the telephone state - a telephone, and a console for a new one.
Later, we figured out that for the connection of a great telephone, only one telephone line is required.
Surprised by your phone, what wins the Flash button? I think you are victorious.
Well, if you don’t win, it means that your mini-ATS works on the pіv-vіdsotka of your tightness.
Therefore, the standard situation is, if after the installation of a mini-ATS, the average coristuvachi vicorist is approximately 1 to 5 vіdsotkіv functionality min ATS.
There are two main reasons for this: (1) ce - simply ignorance of the functionality of the mini-ATS, and (2) ce - just a human line, as it does not allow you to slip into the distance and recognize it new, let it be familiar and handy.
(Note: for such short-term employees, we conduct the training of the functions of modern mini-ATS, go ahead, think about it).
In principle, I, as a specialist in corporate office communication systems, want to know how to navigate between 1 and 5 numbers of phones in the functionality of a small number of functions of a mini-ATS - a whole normal thing and allow you to correctly process the calls.
Also, if you want to win one of the simplest functions: “transferring a weekly” to another speaker, you can also use the Flash button.
Clicking on the Flash button means a command for the station, after which the automatic telephone exchange checks for further clarification.
First, you can, after pressing the Flash button, enter (sound the three-digit) internal number of the other subscriber of your mini-PBX and switch the phone number to another dialer.
If you don’t type anything after pressing the Flash button, then there are 2 situations: either you open (complete) the flow of the move, or the flow of the rose is put on the morning if you don’t feel you anymore, but it’s not broken with him, and you can always turn around until you move and feel one another again. There are two situations that can happen - lie down, depending on how your mini-automatic telephone exchange is set up.
In addition, in the companies that have been put in, it is possible that the “morning call” function has been set, not just by pressing the Flash button, but by confirming the code, so that the subscriber is guilty of pressing the Flash button and the additional numbers 5 and 0, which means the command “put a wake-up call” for the PBX for morning." Well, 5 and 0 ATCs don’t check you, you know, you just want to rozmova.
Later, I’ll tell you about the main function, how to ring out the vicorists of the mini-ATS - that’s the translation of the call to another speaker. І to fight against the pressure on the Flash button for an hour telephone line, back to back entry weekly go to the mini-ATS (your client will call you from the place). Then a mini-PBX sends a call to your phone, and after that, as you picked up the phone, you have a call with a caller, you know that you need to talk to a different caller, you need to redirect to a ) and press the Flash button. If you are guilty of obov'yazkovo to check the confirmation signal to the station about those who have made you understand and that they are checking for you additional numbers: to whom do you want to switch the speaker? A short beep-peak signal at the pipe means that the automatic telephone exchange has understood you and after the first check you have received the three-digit number of another caller. Dial the practitioner's three-digit number. Or you hang up, or (2nd option) you can check if the other speaker tells you, you’ll get ahead of it (for the butt: “Ivan Ivanovich, I want to talk to you, such and such a speaker”) and after that you put handset. After that, as you have put a hearing aid, the subscribers (the client who is telephoning you and your colleague, for example, will not have Ivan Ivanovich in this case) will be able to speak one by one.
Pardons, yakі mozhut vydbuvatsya at vikonnі tsієї simplest functions.
It’s not surprising that when vikonannі the simplest functions can pardon, and in this case, of course, the automatic telephone exchange does not work like that, as if you passed the hand, the shards did not vikonal everything as if following the instructions from the operation.
First pardon, if you haven’t been greeted with the function of shifting the week, then if you try the first time, maybe you don’t see it, then you will forget to send the pik-pik signal (confirming the signal from the mini-ATS) and immediately following the onslaught on Flash , without delay, start dialing a three-digit number. So you actually need to create the following operation: Flash 1 2 3 (for example). The PBX does not respond to this command, the shards after that, as you pressed on Flash, the PBX overpowers you at the handset with a short pik-peak signal and only after that you must dial the three-digit number of the internal subscriber. So sorry for the cym.
Since you have been practicing for a mini-ATS for a long time, and you have it on automatic, you can say that you do not hear this signal (you didn’t smell this confirming signal). True wine. It's just that you have everything on automatic and, obviously, everything goes out (the call is shifted) and there are no daily pardons.
I want to remind you that you will hang up the phone right after you dialed your colleague's three-digit internal number without checking the correct number. won't pardon, to that in your mini-ATS: Your phone is already hung up, the subscriber, having called the office, is known on the morning, and your colleague, to whom you have sent a call, you can hear the call signal on your phone; And just like your colleague picks up the phone, PBX picks up the phone of your caller.
I can stink, I can talk, I can’t get a pardon in any way, but the situation is normal. Just can do it bouti for the correct dots of the zoa of the organizasi standard are incorporate viklik, - if it is right, Yakshcho Vi, having talked to the same by the phone I rejected Yakus іnformatsky nygo, not to snake Kliytati Shriyntami, all the time , you, my glance, goiter, while translating the letter, check in with your colleague and pass on to him all that information, as you have already caught sight of the client. So it will be more correct with a look of good customer service.
At that hour, as we often get stuck with such a situation, if we call the firm (at the paws of the firm) and, having reported about our problem to one spokesman, we are switched to another company, and there everything is repeated again - the new spivrobitnik is not occupied clean , and ask you why you are on the right, and you have to repeat everything again and again. Maybe, if you don’t wake up, shards of wine, having felt you, we can help you to the third spokesman, and you will have to explain everything to the third cob to the end.
That's why you should keep everything in view of these regulations, these standards, as you enter at your company, such as processing of incoming telephone calls. Tse vzhe theme okremoї rozmovi.
And today, I guess: we chose the Flash buttons for such a very basic function, so that you can get stuck in a mini-ATS - that's the translation of the wiki to a different speaker.
After morning, you can turn around until the interrupted movement and continue її.
Igor Mratov, an expert in corporate communication systems.
Tse "spіlkuvannya" mіzh radio tube and base. Call this function autonomously and do not borrow lines, so you can call on that phone, so you can talk to someone on the "internal line". However, there are a number of models of radiotelephones, which do not have access to the external line. Therefore, when buying a device, there will be no re-verification, as in this model there is a link.
Paging - the function of asking one of the elements of the radiotelephone for help with another. It is one-sided (it works the same way, like looking for a worn-in tube in older models) and two-sided. With this, you can call the base unit from the radio tubes.
Translation of language, conference - For the presence in the apartment of the guchnomov's voice, you can transfer Rozmov to the base, or out of the box. You can rule over three times: one to call, the other to use a radiotelephone, and the third one to use a speakerphone. For the availability of a number of radio tubes, you can organize a whole conference, for which portable tubes are called from the base.
Call forwarding it is possible for models with dekilkom tubes. The cost of forwarding a single phone call to a foreign language.
morning call on the portable handset/base unit – the "hold" button on the radio handset/base will deactivate the function. It's too bad, because you have two parallel telephones - you can switch from one device to another. Rozmov can trim up to 10 quills. Ring the morning to the onslaught of the sp-phone button. This function is often victorious, as it is necessary to turn on the microphone for a certain hour, and there is no "Mute" button.
Remote control by speakerphone - you can use the speakerphone on the base on the stand for additional radio tubes.
Zvichayny avtovidovidach - vikoristovu standard 30-hvilinna microcassette, may have two modes of recording. In voice recorder mode, you can record streaming phone calls. Possibly and remote control: listening to all or less new reminders, saving a few records, listening to an appointment, in which the base is known.
Digital avtovidach - vikoristovuyut for zberіgannya povomlen spetsіalnі elektronnі chips zamіst mikrokasseti іz magnetic strіchkoy. Tse pіdvishuє nadіynіst i dovgovіchnіst avtovidovіdach. But if it is necessary to save the reminder, then from the great automatic filing you can change the cassette and replace it with a different one. At the digital auto-recovery, you can also save a lot of money, protect yourself, the more you save, the less time is left for new ones.
Voice time/date rating - the function of auto-sending, which allows you to install exact hour that date of the record is confirmed.
Tonal distance keruvannya - allows you to manage auto-paging on another phone, you can listen to and delete records that are not necessary for you, rewrite vital messages. For whom is it enough to transfer the phone from tone mode(After dialing your number) then dial the same code, which is better for you, which you programmed on your phone. As in the telephone, so you telephone, the tone mode is daily, you can replace it with the so-called beeper, which you see beep singing frequency, such as when pushing a button in tone mode.
Notifications on the pager about the removal of voice notifications - the pager should receive notifications about those who have new messages on auto-dispatch.
Mobile encryption
-Vykoristovuєtsya to intimidate (at the deakіy world) the ability to listen to Rozmov. In cheap models, analogue methods of encryption are used (a special noise is superimposed on the basic signal, which is filtered on the receiver). Stupin zakhistu is not too high.
Models DECT standard- victorious digital methods ciphering, which signifi- cantly raises the rіven zahistu from eavesdropping.
speakerphone (SP-Phone) - the ability to speak and dial the number without picking up the handset. If the speakerphone is switched on, it is enough to pick up the phone, so that the wine is connected.
ID code . A personal code is installed for the handset and base. You need stinks so that the skin base receives signals only from its tube. If the base oscillates only on a weekly call with less than its own pipe, then a third-party person with another pipe will come to the qiєї line significantly more folded. Different models radiotelephones vikoristovuyut different number identification code.
Functions of telephones
AUTODIAL (auto redial) This function may work on phone models. Vaughn help call the busy number. For which phone is put into automatic dialing mode. The device dials the number of indications from small intervals (inode kіlkіst once). As if on the other end of the line they took a hearing aid, you will feel the voice of the subscriber through the sound of the speaker of the device.
REDIAL (redial) Dial on push-button telephone the number will be automatically entered into the active memory and will be saved, the docks will not dial another number. Just press REDIAL, and the device will automatically repeat the dialing of the remaining number, as soon as you need the PIN again. I press the key to secure all modern telephones.
FLASH (skidannya, remikannya) Line open button. Vikoristovuetsya, as your office has a modern digital mini-ATS. Through this button, the switching of subscribers is displayed, for example, call forwarding, or the robot is in the call ringing mode. You can also use it, if after the end of the call you want to dial the next number without putting your hearing aid.
MEM DIAL Click the button to call out from the phone’s memory, there are phone numbers recorded there.
MEMO (reminder, reminder) This button allows you to save a new number in the phone's memory at the time of pickup. As your caller dictates the number to the phone, you can press the MEMO button and dial the number from the memory at the help keypad. With this, the rozmov will not be interrupted and the dial will not be accompanied by loud tone signals. After you finish calling, you can call the number by picking up the handset and pressing the MEMO button.
MUTE (microphone on) This button allows you to change the phone call for an hour, turn on the microphone on the phone and talk with your colleagues, and then continue the call. With a victorious copy of "Mute", you will continue a little of your spy.
PAUSE (pause) PAUSE sound victorious to introduce a necessary pause in the process of dialing or memorize the number, for example, in the inter-dzvinkah. This is especially handy when dialing without picking up the handset.
TONE/PULSE Tse peremikach tone dialing on impulsny. With pulse dialing, the skin digit of the number is indicated by the number of electric impulses. On this principle, blamed on the cob of the century, electromechanical automatic telephone exchanges are practiced. With tone dialing through a digital exchange, the skin digit is assigned by the frequency of the call signal. Electromechanical automatic telephone exchanges can be more secure distant call, lower digital, ale yakist digital call more and more nadіynisha. Our country's telephone line is made up of old electromechanical automatic telephone exchanges, and partly of today's digital ones. Older houses still have inaccessible tone dialing. Because you have connected your new phone to the Russian network, and the phone does not dial a number, put the tone/pulse jumper at the pulse position.
TONE (one-button switch to tone dialing) If you want to send a call or call through a computer, you need to remember the pulse mode on the phone to the "tone" mode, to change the tone/pulse mode switch, just press the TONE button marked with a star on the keypad.
Vitannia. What is the role of the FLASH button on fixed phones? Behind the hell!
- transfer of a call to an additional one (as well as an automatic telephone exchange)
- Victory for additional services at stations with touch-tone dialing or at office PBXs (dzvіnka retranslation only). It is possible to win as a line in that case, if the FLASH validity on the phone overrides the same parameter in the line.
For the presence of the FLASH button on the telephone, it is short (0.5-0.8 sec.) to imitate the pressure on the FLASH button.
In short - you - and me - won't need swidshe.
–
For example:
Utrimannya vikliku =
Let's forgive the onslaught of the Flash button without breaking the button. When you can hang up the phone, the device tells you about the morning call with a short periodic signal.
Transferring a weekly to another number =
Service I will transfer the weekly call for the first hour of the call to the next number. To translate, you need to put a streaming call on the morning (by pressing the Flash button on the phone), after which you can dial the number of another subscriber, check if you have called, what is called, tell you about the translation and turn it off (place the felling). Between subscribers who call and call, the call will be set, the phone will ring.
Trilateral congress =
This service allows you to call another subscriber for an hour of in-line work and communicate with both subscribers on a call without calling a call. Call the subscriber (A) for an hour, press the Flash button, and then dial the subscriber's number (B) . The subscriber (A) at the time of the change in the mode of morning call on the line. In order to switch between subscribers, as if the exchange of confidentiality between them is necessary, you can switch the Flash button on your phone. - FLASH - drop / drop.
An analogue of a button, place the handset.
In voice-frequency automatic telephone exchanges (for example, offices) their functions are absolutely identical.
Ale in impulse exchanges (mayzhe all of Russia, the Crimea of Moscow (499) and other exchanges of St. Petersburg) do not press on the handset for a short time until the call is opened (you need to take a couple of seconds, otherwise there will be short beeps / silence). And the "flash" button will again cut off the sound in one onslaught (after the onslaught there will be a slightly clean beep).Another button REDIAL (Re: Dial) - repeating the last called number.
In import phones, you drop the call and dial the number again.
In Russian phones, I don’t repeat the number anymore (alternatively, you need to manually open it).And the "morning" call (hang up the phone, and then pick up the phone on the parallel phone and continue rozmovu) - the HOLD button. As soon as the pressure is pressed, the indicator lights up and the voice at the trumpet becomes muffled, or else the melody.