Dir 300 beeline firmware customized. DIR300 (nru b5) firmware from Beeline at the factory. Setting up an Internet connection

To access the router's web interface, you need to open your browser (for example. Internet Explorer), in the address row, type the router address ( 192.168.0.1 ). Look like this: http://192.168.0.1 .
The router is sleeping I'm a koristuvach- Enterable admin, and the password field is left blank. It goes without saying that the router comes out of the box with factory settings.

If you don't want to let me in, try entering the password in the row admin.
For safety reasons, I highly recommend change password.
For this, go to the tab System and vibrati menu Administrator password.

In the field Password (New Password) enter a new password, and in the field Confirmation (Confirmation) repeat the new password one more time. Let's save adjustments.

Setting up the DIR-300 NRU B5 router for Beeline

When connected router DIR-300 NRU B5 to Beeline it is necessary to change the protocol L2TP. To fix this, let’s move on to the section Merezha ->Z'ednannya:

Pressing the button Add. The menu for creating a new interface opens WAN:

Connection type — L2TP
I am the service tp.internet.beeline.ru
PPP im'ya koristuvach— Your login is from the contract. Beeline has the contract number.
Password- Your password.
Password confirmation- Repeat password.
Encryption — Without encryption.
We don’t waste anything else and save settings with a button Save.

Setting up Wi-Fi on DIR-300 NRU

For adjustment Wi-Fi on the router D-Link DIR-300 NRU B5 let's go to the tab WiFi, menu Basic setup:

In the field SSID you need to enter your name dartless lines. For example Moi_WiFi. In 99% of cases, nothing else is required, press the button Save then go to the menu Improving safety:

Save it.

After completing the setup, don’t forget restart the router with new adjustments.

If you have a DIR-300 with a different firmware version, look at the following statistics:

Yak nalashtuvati dir-300 nru on 1.3.x
How to set up dir-300 nru for Beeline on 1.4.x

Installing the D-Link DIR-300 router manually is easy. For this reason, you need to know the basic rules for setting up D-Link routers and the characteristics of the provider that provides you with an Internet connection. Let's take a look at how this router is configured for the Beeline network.

From now on Beeline vikorized these types of connections droneless internet either PPTP or PPoE. Currently, the L2TP type is being reviewed, which significantly changes the importance of ownership. This has a positive impact on the work of the home Internet.

Hey, let’s start getting ready D-Link router DIR-300 for Beeline. First of all, you need to install the correct settings for the measurement map. It is our responsibility to set up automatic IP address retrieval. What is installed on your computer operating system Windows XP, go to the “Start” menu, select “Control Panel” and look for the “ Merezhevy connections". Click on new right button We are pressing on “Vlastivost”. You will see the list where you need to select the item “Internet Protocols TCP/IP”.

Press the “Power” button and check which points are marked with a dot. We need all phrases that end with the word “Automatic” to be marked.

Yakshcho vi - koristuvach Windows 7 , go to the “Start” menu, go to “Control Panel”, select “Internet Management”, and then – “Internet Management Center” private access". On the left side you will find the item “Change adapter settings”. Click on it with the right mouse button and select “Power.” Open the item “Internet Protocols version 4 (TCP/IPv4)” and insert dots next to phrases, such as the word “Automatic”.

After we have been instructed, we can proceed immediately before connecting the router. We insert the provider cable into the Internet port, and a short wire into one of several LAN ports. The other end of the drill is installed in I'll cut the map computer.

The next stage is authorization. Launch any Internet browser on your computer and enter the IP address of the router in the address bar. For cleaning - 192.168.0.1. The authorization window appears. In the “Koristuvach’s name” and “Password” fields we write “admin” and “admin”, then press “Login”.

A new window will open where you need to select the “WAN” item. By clicking the “Add” button, you will be directed to the creation page for a new connection.

There you will need to enter the data necessary to set up a Beeline connection.

From the “Connection type” list, select the “L2TP + Dynamic IP” option. As I was wondering, L2TP itself is Narazi Vikorist company Beeline.

Then we will fill in the “Koristuvach’s name” and “Password” fields. There you will need to send data from your provider. There are problems associated with the Internet connection agreement. If you have received a copy of the contract, please call before the service technical support Beeline company and clarify your details.

I, find that in the column “VPN server addresses” enter “tp.internet.beeline.ru”. Then press the “Change” button to save the newly configured Internet connection.

Offensive stage - wi-fi setup. We turn to the “Advanced settings” menu and in the “Wi-Fi” section we find the “Basic settings” item. You must enter names in the SSID field new measures. You can choose whether or not you are in charge of your diet. Enter your name and press the “Change” button.

To connect the D-Link DIR 300 router to Beeline, you need to click on the master. Adje Yoga is easy to set up. Operators will contact you to the best of their ability. It is not necessary to enter IP addresses, traffic masks, DNS, or ISP firmware. The problem is not caused by the factory Firmware.

How to set up the D-Link DIR 300 Beeline router

The new modem you picked up at the store can be connected right away. If you have used the device before, it would be better to reset the parameters.

Connection

To set up the modem, better yet, directly connect it to your computer. Then you can use Wi-Fi as needed.

If you want to connect the modem through a switch or switch:

1. Insert the Internet cable into the port of the switch.
2. Just use a wire (WAN) to connect the switch to the Internet connector of the modem.

Pochatkove getting better

If you set up the modem first, turn it over and start the new system.

1. Go to the Measurement Management Center.
2. There may be a buti D-Link mesh DIR 300. Please note that you do not have a connection with Beeline.

With Wi-Fi everything is different:

1. Click on the mapping menu on the task panel. Or in the “Ceruvanny Center” click on “Connect before...”.
2. See the exact information available.
3. Select a measure.
4. "Connect" button.
5. Enter your Wi-Fi password.

Now you need to set up IP and DNS:

Firmware

Find out what type of router you have right away. There are a number of models (for example, B5, B7, A1). And the skin has its own stitching. You can review the version of the documentation before installing it. It’s also indicated on your body - look for the sticker on your new one. serial numbers. "H/W ver" - virobu model, "F/W ver" - PZ version.

Security software for the printer on d-link.ru.

1. View this site.
2. Visit " Shvidky poshuk» Then open it in a new DIR 300.
3. Or you can find the device in the “Products and Solutions” section, under the “Routers” section.
4. On the product side there are characteristics and images. You need the "Vanation" tab.
5. The latest firmware is available. Lower - previous versions. Descriptions of functions and shortening, which are added with the skin update.
6. And there you can also acquire aids from installation and adjustment.

If you do not know the security program that is suitable for the modem, go to the FTP server of the D-link company - ftp.dlink.ru.

1. Open the Pub folder.
2. Then Router.
3. Find your router model – DIR 300.
4. Firmware Catalog.
5. Choose a security program. Installer files have the extension bin. Make sure that the version of the program is the same as the one that is installed, and matches the model.
6. You can go to Old folder. There are advanced options for utilities.

If you bought a modem in official Beeline stores, you will need to install the firmware according to the operator. It’s not so easy to install otherwise. Resetting this configuration does not override the factory security program. To change the Firmware, please contact the service center.

Firmware installation

To change the factory firmware:

Change PZ from operator

There is no way to restart the Beeline router this way. The firmware in the printer is in bin format. And devices purchased from the operator are “read” only by fwz. To change the security software, it is best to take the router to a service center.

IMPORTANT. You can install the original program in the vibrator at the “home minds”. It's not safe for the outbuilding. If you connect the modem first, don’t risk it.

First method - outside view firmware.

1. "Margin Control Center" - "Adapter Settings".
2. Open the “Authority” of the connection that the router operates.
3. Dali – “Vlastivosti” to the “TCP/IPv4” protocol.
4. Give your computer a timed IP. To do this, select “Vykoristuvat nadushku address” and enter, for example, “192.168.0.11”. If you remove the Firmware, the modem can change its IP. If both the boundary card and the border card have the same address, you will not be able to open the web interface.
5. Turn off the router from power loss.
6. Press the Reset button (insert the haircut into it).
7. Without releasing them, reconnect the modem.
8. Check for 30 seconds.
9. Release the button.
10. Try accessing the modem interface. Only behind the address “192.168.1.1”, as on beline routers, but behind “192.168.0.1”.
11. A button for downloading new firmware will also be available.
12. After installation, you can re-install the IP automatically.

Another method is “intermediate” Firmware.

IMPORTANT. In two ways, the modem can become unusable. The content of the firmware is not intended for the modem, but outside it is visible - the twist is rizikovan.

The web interface is still tweaked.

To set up your connections, you will need the information required for the operator to contact you.

Factory firmware

Firmware by provider

Setting up a Beeline modem is much simpler:

1. Go to the web interface – “192.168.1.1”.
2. Enter login and password.
3. Come up with an access code for the Wi-Fi connection.
4. Indicate which LAN port you will connect the TV set-top box to.
5. You can also set a password on the modem itself.
6. Click "Save".
7. Wait until the device restarts.

In the factory Firmware, the Wi-FI and IP-TV options work the same way. Ale stench appears in various menus. The D-Link DIR 300 router from Beeline can be easily adjusted. All parameters there are set in advance. You will also need to enter your login and password. If you plan to change your provider, it will be difficult to replace such a router.

For those who don't mind reading the foreword, read the text after the quote

Yesterday evening, during a break, I decided to reset my router back to factory firmware(if you changed it to beline yourself), having encountered difficulties. Before we tried stupidly through the menu to update to the factory firmware version 1.3.3, the update did not appear so that the update was not up to date, then we wrote that in the distance, otherwise exit the standard white menu (router addresses on the white firmware 192.168.1.1). Next, following the steps (naturally, the router connects to the computer), the connection on the computer is connected ip 192.168.0.10 mask 255.255.255.0, I turn the life of the router, press the reset button, check it for 15 seconds (after trying i 2. .0.1 (i 192.168. 1.1 also) having tried both Opera and Google Chrome and IE using the search engine, having tried everything as they said in the statistics, here I will immediately say that the router is not in the mode of replacing the firmware "emergency room" axis copy the statistics and for more early collections of the price There is no special thing in principle

Hey, let's go:
1. If the router does not give the necessary signs of power, and only the orange “power” LED is on, then we first remove all the cords from the router, including the power supply.
2. Download from
Respect! Leave to read the welcome text.
firmware, .bin file from the folders DIR-300NRU/FIRMWARE/B1_B2_B3 strictly for our router and saved, for example, directly to drive C
3. In setting up the boundary card and in the authorities, the TCP/IPv4 protocol is prescribed to the IP address 192.168.0.10 mask 255.255.255.0
4. Next, we connect the Merezhevo card of our computer with one of the LAN ports of the router, let alone LAN1.
(To update the factory firmware of the DIR-100, you need to connect the computer's interface card to the WAN port of the router (internet). Indicate the update to the previously installed firmware and follow the instructions fla.)
for dir-100
5. Press the RESET button (with a hammer or other blunt object) and connect the router
6. Do not let go of the RESET button (20 sec), please wait until you are ready emergency mode router update.
7. U Mozilla browsers Or Opera (not IE) type the address 192.168.0.1 and lower the RESET button.
8. Indicate where the firmware is located (where we downloaded it) and press Upload firmware now.
Please wait until the update is completed
9. If everything is completed correctly, after completing the authorization form of our D-Link/
Login and password turn for payment admin/empty
The axis after such simple manipulations can update the firmware to the D-Link factory after a failure, missing firmware, or after firmware from third-party manufacturers.

I repeat, this article did NOT help
as a result, everything is brilliantly simple

It is necessary from the shelter to select our collection in our box “B5” (you can find it on the sticker at the bottom of the rotor). At the guarantee service, you can also find other useful information there, such as instructions for different versions PZ http://ftp.dlink.ru/pub/Router/DIR-300_NRU/.
Shukaemo PZ with extensions.fwz I selected (DIR_300NRUB5-1.2.94-20110414.fwz)
further, in the standard online menu of the router at the address 192.168.1.1, further in the expansion of configuration, then the system, updating the software, selecting the desired file, and then updating it up to 4 times, but not more than 4 times. And as a result, the connection is broken and more at the address 192.16. It turns out that we go to the address 192.168.0.1 and go to the router menu so that in the store the login and password are defaulted (login admin, password admin) and then update it wherever you want and as you want, I have a vinyl requirement at the exit White firmware for sound language with a change to the TTK (push from Goodline on the new one with the Beline firmware worked well) before connecting the Beeline and the factory router from the store to the Beeline so that the IP TV set-top boxes to the TV were handled inappropriately After re-flashing, everything became stable.

This D-Link device falls into the budget router segment. Correct setup router to allow Beeline subscribers to use the DIR-300 IPTV service and ensure stable Wi-Fi coverage within a small apartment.

Information about technical characteristics That possible addition is presented in .

• The Internet provider cable is connected to the WAN port signed as INTERNET;
• The computer is connected using an additional patch cord to the LAN 1 router socket;
• For obvious TV set-top boxes, connect them to LAN port 4;

Setting up your PC

After enabling life, the router’s DHCP server will assign internal IP addresses to all devices connected to it. To deny access to the router from your computer, you need to check that the settings are correct. edge adapter PC.

In Windows 7, 8 and 10, the easiest way to do this is by right-clicking on the connection icon in the task panel.

The next step is the transition to the PC adapter.

If you have an active connection, switch to TCP/IPv4 settings.

The computer is responsible for configuring the network from the router automatically.

Login to the router interface

You can configure the router from a tablet connected via Wi-Fi, but you can also configure it from a computer, because mobile browser Elements of the web interface may not display correctly.

To gain access to the router's admin panel, you need to open the local IP address of the device in your browser.

At successful lover head page web interface, the authorization prompt will appear.

Detailed information on how to establish a connection with the router is provided in the following section.

Setting up connection

The new firmware of the D-Link DIR-300 router has simplified setup using the Click'n'Connect utility. It is easier to connect to the Internet from the Beeline server than to log in manually.

To do this, you need to go to extensions mode and open the “WAN Management” tab.

In the “light” air-interface, the layout of the elements is different, and the options and menu items are named differently.

• Setting up the DIR-300 configuration for BEELINE begins by selecting the Internet connection protocol: L2TP + Dynamic IP.
• Whatever the name is, whatever the name is.

• The accountant's name is login 089******* and the password for Internet access is specified in the contract.
• The server address through which Beeline gives its subscribers access to the network: tp.internet.beeline.ru
• Options "NAT" and "Merezhevny screen" must be enabled;
• The “IGMP” option allows the router to process multicast traffic, which obviously Beeline's services IPTV, this checkbox is checked.

After the setup is stopped, the router will inform you about the need to re-enable and after the creation is completed, the connection will be requested.

Setting up IPTV

To implement the IPTV service, Beeline uses untagged traffic. Setting up the router in this case is limited to the visible port for the set-top box behind the additional “Master” DIR-300 and there is no need to install a transparent place that runs in parallel with the WAN.

In the scenario of using a DIR-300 TV set-top box with a BEELINE TV set-top box, in order to watch the TV show on a computer, you will need to set up the rules for broadcasting virtual ports. This means that the router will now decapsulate multicast traffic and process data not at the channel level, but at the edge level.

Following the processing of the L2TP Internet protocol, the routing of TB traffic due to the use of the DIR-300 processor is close to the maximum, which will negatively appear on the router’s speed code.

Setting up Wi-Fi

For WiFi setup On the DIR-300 you can use the “Dartless Measurement Master” utility. This method allows you to fire up a stolen Wi-Fi network in seconds:

• Mode – access point;
• SSID – name of the current WiFi network;
• Key - Password for access to home Wi-Fi.

Other methods for setting up a droneless access point and recommendations for improving the coverage and speed characteristics are presented in the report.

Firmware update

Before you set up Internet connection on the DIR-300, you need to install the router I'll keep the version Firmware from the D-Link FTP server and installed on the device. This is especially important during the hours of work in the Beeline network, since the provider connects subscribers using the L2TP protocol. When processing such traffic, the router's processor detects strong pressure, which can lead to connection failures and freezes. Z new firmware The router works more stably with L2TP.

Did you know Drukar's mercy? See text and press Ctrl+Enter