How to fix the asus rt n11p router: instruction manual. Nalashtovuemo router ASUS RT-N11P.

Today, I will tell you how to get the Vikonati discounted to the factory settings on the routers Asus. Really, it’s a korisna river. I think that the article will become rich in good fortune. In principle, on Asus routers, settings can be dropped in the same way as on other routers. You can do this with a special button on the router case, or through the control panel, there is such a function.

What is the discounting and for what yogo work? Everything is even simpler, the leather router has standard parameters, with some wines from the factory. After the purchase, we automatically set up the router as we need it: we set the parameters for connecting to the provider, set the password for Wi-Fi, change the name of the network, etc. The axis for the butt, we recently. So the axis, buy vipadki, if you need to clear these parameters, so that the router will be reset from the factory settings. For example, you changed the provider, you want to sell the router, otherwise you didn’t succeed in the setup process, and you want to start a little more. For someone else, so that we don’t care about the old settings, we just drop everything on our router and set it up again.

And also, in the instructions for fixing specific models Routers, I'll start the rajah before nalashtuvannyam robiti kidanny parametrіv to factory settings. It is necessary for clearing the settings, if you can already set them. І through them you can fix problems in the setup process.

Tsya article pіdіyde is practical for all models framing outbuildings type Asus (RT-N10, RT-N12, RT-N14U, rt-g32 etc.). The principle is one and the same as skin. Hiba scho can be adjusted button and її roztashuvannya.

Robimo downloaded on Asus routers

As I already wrote above, for skidding, I installed a special button on the router case. signed won reset, or restore. Asus also likes to add the WPS function to the button (Activated with a short push).

So, to throw off the settings, to us it takes 10 seconds to press the Reset button and try. Let's let it go, the router will reboot and the factory settings will be updated. The axis button looks like this (on the butt):

On Asus RT-N18U, for example, the button is not signed.

And the axis looks like a bigger old Asus RT-N13U:

Here I think everything is clear. They pressed the button, tried it for 10 seconds, and the update was fixed.

Factory reset via control panel

Another simple way. We need to go into the setup of the router;

In settings, go to the tab administration - settings management and press the button renew. onslaught Ok for confirmation, and check until the process of updating the parameters is completed.

Before speech, it is possible to save the settings, and then, if necessary, add them to the file. I will write about it in a short article. I bet you had to throw off the patching of your Asus router, if you can’t see it - ask in the comments.

ASUS RT-N11P is a simple budget router of starting level, assignments for non-viable core drivers. ASUS has a series of similar devices, for which the RT-N11P router has more "strong" antennas.

The number of models of routers from ASUS in this hour is even greater. There are absolutely new models, while there are more routers of the past generations for sale.

The model has the letter P in the name to talk about a larger exhaust antenna, which can have a larger strength coefficient. Vіd tsgogo fіtsієnta bezporeddno to lay a large area of ​​Wi-Fi coverage. In general, the RT-N11P model is a classic ASUS router with a typical design, software and hardware security.

After choosing and attaching a yoga router, it is important to properly place and fix it in a proper rank. Blame it on failures, if providers block the dynamic type of connection. Most of the home Wi-Fi extensions have been tuned to a similar type of connection. Regardless of the price, you still need to change the Wi-Fi router options to configure dartless mesh.

Set and zvnіshnіy look

The router is delivered in a compact standard cardboard box in dark colors. Її vіdrіznyає povna localization. On the packaging basic information, And the photographs themselves, key features, details technical characteristics that other core information.

The delivery set is standard for low-cost models and includes: a router, a pulsed power supply (12V / 0.5 A), a black patch cord, a warranty card and a short help for setting up. The warranty term of the router is surrounded by three rocks.

The dimensions of the router are folded 14.6 × 11.1 × 3.4 cm without mounting antennas. The material for the body is black plastic. Along the ridges, the lower part is provided with gummies. Also open for fastening on the wall.

The design of the front side is similar to the "diamond edges". The stench practically does not play with moments, but behind its design there are trochas of darkness and rudeness.

The side walls and the lower part are equipped with ventilation grates. The temperature regime is not called out at the maximum tension.

From the rear part, you can use two fixed antennas, five non-indicator mesh ports, an entrance rose to the live block with a toggle switch, as well as a WPS / drop button. Roztashovane everything is smart, but for the class of budget models it's all traditional.

How many times a day the router vibrates. Why ASUS trims yoga on the most equal like in the top ones, so in budget models. The design resonates with practicality, and the design of the router is fully compatible with other routers in this price segment.

connection

The router ASUS RT-N11P needs to be connected to the work station, mobile computer or other portable building.

The connection can be made either through a LAN cable, which is included in the router kit, or for additional WI-Fi. Bigger connection - through a cable, in connection with it, we will encrypt Wi-Fi with current security firmware, which can cause problems.

The sequence of events physical connection router:

• it is necessary to plug the life block into the “power” socket;
• then we need a LAN-cable from the provider, plug it into the “WAN” socket of the router;
• The tether cord from the ASUS RT-N11P router kit is connected on one side to the tether card of the work station or laptop, and the other side to any LAN socket on the router.

The physical connection of the router can be completed. If the connection is successful, the front panel of the router may light up two indicators: "WPS", "WLAN", "POWER", and one "LAN".

Video: Asus RT N11P

Enter

Most often, the power is heard, as if blamed when the router is set up - “How to enter the setting?”. For whom it is necessary to enter the yoga web-interface.

Photo: authorization of the connected ASUS router

To enter the web interface of the router, follow the steps to open the web browser. After launching it in the address row, type the ip-addresses of the router. The new annex is located at 192. 168.1.1. For zamovchuvannyam Login - "admin", Password - "admin". Login and password can be used to understand that the router has factory settings.

Setting up protocols on the Internet

After successful authorization in the router interface, select the tab in the left part " Additional parameters”, І in the list, that when you appear, mark “WAN”. Further setting to lay down in the same connection protocol.

PPTP

To configure the router using the PPTP protocol, follow:

L2TP

To configure the ASUS RT N11P L2TP router, follow:

PPPoE

Basically, all providers in Russia work according to twill protocol PPPoE, including Rostelecom.

To configure the router using the PPPoE protocol, follow:

Static IP addresses

To configure a router with a static IP address, follow:

Setting up ASUS RT N11P router in repeat mode

To configure the router for robots in repeat mode, follow the steps:

WiFi

Wi-Fi is built up like this:

• it is necessary to see "Additional settings - Bezdrotov merezha";
• it is necessary to select the left tab i in the list, which appears as a sign of "Bezdrotova merezha";
• then you need to set the parameters:

• remember nalashtuvannya pressing "Zastosuvati".

IPTV

IPTV in the router is set up at the time of setting up the parameters for connecting to the Internet. For which you need to select “Select IPTV STB port” and enter the number of the router port, to which the cable will be connected to the set-top box.

router firmware

Yakshto koristuvacha not vlashtovuє router robot or necessary supplementary ability It is recommended to reflash the router.

For whom it is necessary:

• download the firmware from the Internet (it is not easy to find the required version of the firmware);
• extract the BIN-file of the firmware from the archive;
• in the menu "Administration - Firmware upgrade" select the firmware file and press "Upload".

pouring new firmware takes close to 5 credits.

Renovation of factory upgrades

Often, after changing the configuration parameters of the router, the trace of the memory is changed, in some cases due to folding, the stench was renewed. For this next step, go to "Administration - Added settings - Update / Save / Make settings"

To save the current parameters of the router, you need to click on "Save". Її the configuration file will be saved in the required space on the hard drive.

To update the parameters of the setup file, click the "Choose file" button, select the desired setup file and then click the "Edit" button.

It is important to know that the selection of the “Information” item will lead to the adjustment and renewal of the factory parameters before the discount.

In general, ASUS RT-N11P is a simple and budget option for a folding home measure, What is added up to a maximum of four wired outbuildings and dartless gadgets. Technical Capabilities of ASUS RT-N11P

authorization

In order to use the web interface of the router, you need to open your Internet browser and type 192. 168.1.1 in the address row, Im'ya Koristuvacha - admin,password – admin(Remember that the router has factory settings, and its IP has not been changed).

Setting up Wi-Fi on the router

Go to the menu item Additional settings - Bezdrotova merezha. Give respect, that here it is possible to inflict offense on radio blocks. Name (SSID) - indicate the name for the first one and for the other one, but the stink is guilty.

In the interface of the router, you need to go to the zliva tab Additional parameters Bezdrotova merezha.

We set the parameters and the next rank:

1. field SSID: Introduce the name of the kerfless mesh. The value in this field can not be changed.
2. Authenticity verification method: WPA2-Personal
3. WPA Encryption: TKIP or AES
4. WPA forward key: you must enter any number of numbers, from 8 to 63. It is also necessary to remember that you could indicate them when connected to the measure.
5. Press the button below get stuck

Connecting to the Internet

In the interface of the router, it is necessary to select the tab Additional parameters, Select from the list WAN.

Setting up a PPPoE connection

1. WAN connection type: PPPoE
2. SO
3. Retrieve IP addressesі connect to DNS automatically- put a speck on SO
4. Im'ya Koristuvacha: Your login for the contract
5. password: Your password for the contract
6. MTU: 1472
7. Enable VPN + DHCP Connection - nothing
8. Saved by pressing the button get stuck.

Setting up L2TP connection

1. WAN connection type- L2TP
2. Enable WAN, enable NAT, enable UPnP - set everywhere SO
3. automatically- put a speck on SO
4. Name koristuvacha and password- login and password from the contract
5. VPN server -
6. Other parameters can not be changed. In the name of the host, write something in English.
7. save up

Setting up PPTP (VPN) with automatic removal of the local IP address

1. WAN connection type: PPTP
2. Enable WAN, enable NAT, enable UPnP - set everywhere SO
3. Change IP address and connect to DNS automatically- put a speck on SO
4. Im'ya Koristuvacha: Your login for the contract
5. password: Your password for the contract
6. enter the ip-address or the name of the vpn-server for the contract
7. In the name of the host, write something in English. Saved by pressing the button get stuck.

Setting up PPTP (VPN) with a static local IP address

1. WAN connection type: PPTP
2. Change IP address and connect to DNS automatically- put a speck on nothing
3. IP addresses: We collect your IP addresses for the contract
4. Pdmerezhi mask: We hammer the mask behind the contract
5. Main gateway: We clog the gateway for the contract
6. DNS server 1: і DNS server 2: enter the server of your provider (Rostelecom Omsk DNS 1: 195.162.32.5 DNS 2: 195.162.41.8)
7. Im'ya Koristuvacha: Your login for the contract
8. password: Your password for the contract
9. Heart-Beat server or PPTP / L2TP (VPN): enter the ip-address or the name of the vpn-server for the contract
10. Saved by pressing the button get stuck.

NAT with Automatic IP Address Removal (DHCP)

1. WAN connection type: automatic IP
2. Saved by pressing the button get stuck

Forwarding / port transfer

Port forwarding is allowed remote computers connect to a specific computer local lines(LAN). For full functionality, such as P2P add-ons (eg BitTorrent), you can also set port forwarding settings. Detailed information marvel at the core of P2P add-ons.

It is also necessary to set the port range for port forwarding for merged clients, enter the service name, port range (for example, 10200: 10300), IP addresses, and leave the local port field empty.

If your network has a firewall and you have set port 80 for the web server in the local network, that web server will conflict with the RT-N11P web interface.

You have assigned a port of 20:21 to your FTP server in the local area, which FTP server will conflict with FTP server RT-N11P.

1. go to Internet - port forwarding.
2. Enable port forwarding- SO.
3. im'ya service- the name of the created redirection. Enter whether it is convenient for you
4. Port range \ Local port- port number, which is required
5. Local IP addresses- I will add to the merezhevu address, to which I will redirect the request
6. protocol- Select the required protocol
7. Pіslya thogo onslaught Add. Pіslya tsgogo - get stuck.

Checking the status of connection to the Internet

Saving / updating the router

After the settings have been made, it is recommended to save them, in order to cause problems, you can restore them. For whom it is necessary to go to the tab Dodatkovі nalashtuvannya, menu Administration ", tab" Reinforce / Save / Zavantage settings.

• To save the current settings of the router, you need to press the button save. The file with the settings will be saved in the specified space on the hard drive.
• To update the file, you need to press the button select file, Select the path to the file with the settings, then press the button Nadislati.

Respect! pressing buttons renew Bring before the renewal of the factory upgrades!

It won the first place in the nomination “Wi-Fi without a root”. The key role in this, shvidshe for everything, was played by the presentation in the past of the top models of routers in the upper eve. However, the cultivator has given respect to the mass segment, in which, on the Russian market, a dekilka of outbuildings is promoted today, it is difficult to look into them. On the right, in that some of the models are present in different modifications and versions, so that you can use them for your own consideration when buying.

For the time being, the hero of the state has gone far away like a swindler. Asus RT-N11P present moment in one configuration, and it will not be protested in this article. Attached position in the mass segment - there may be a wire port of 100 Mb/s and a single-band access point with a maximum connection speed of 300 Mb/s. I look at the fact that the software security of the maker is unified in terms of rich parameters for most models, varto ochіkuvati and high speed of work and a wide (for this segment) set of functions. In addition, add some alternative versions of firmware, which may appear brown in the category of coristuvachs.

Contents of delivery

The router is shipped in a standard small size cardboard box. It is decorated in dark colors and is mostly localized. There are photographs, key features, detailed technical characteristics and other basic information on the packaging.

The delivery set is also traditional for the budget segment - a router, a pulsed power supply 12 V 0.5 A, one black-colored patch cord, a warranty card and even a short instruction on how to start it.

The term of the guarantee for attachments is threefold.

Starry look

The model is most similar to the young brother of the top-end outbuildings for its old-fashioned appearance, taken off by changing the size of the two times and the remote one of the antennas. Dimensions are 146 × 111 × 34 mm without antennas.

Housing made of black matte plastic. On the days of the presence of chotiri gumovі nіzhki. In addition, open for mounting on the wall in one of two positions - with antennas uphill or to the right.

The front side may feature a "diamond" design of the front panel and a female with "rough sanding" at the top. At the left lower coddle there is a block with several light indicators.

The stench does not play with the wink of the moment (they are only engaged in the Wi-Fi indicator), but rather the standard round shape, green colors and look to be completed in pairs with the design of the older models.

Ventilation grates are located on the side ends and days. There was no respect for the temperature regime at high demand.

There are two unknown antennas in the back, five trussed ports without any indicators, an input to the live block with a microphone, and also a WPS / drop-down button. It's fine to finish everything, but for this class of models, it's possible to finish it.

To the point of preparation, I will add no respect. The virobnik trims yoga on high and in budget models. The design is nothing special, but it is quite practical and handy for this segment.

hardware configuration

Foundation router based on Mediatek chip - MT7620N revision 0206. This family is currently one of the most popular options in the budget segment. The frequency of the robotic processing core is 580 MHz (in the alternative version of the firmware, the frequency is 600 MHz, which is also standard operational memory). A radio unit supporting 802.11n in the 2.4 GHz band with a maximum connection speed of 300 Mbps, connected to the main processor. The new one also has a five-port switch 100 Mbit / s. The amount of operational memory SDRAM is 32 MB, 8 MB flash memory is installed for firmware. Formally, similar models often have the option of 64 MB of RAM, but if there is no USB portі po'yazanih servіsіv z him, іkі іntensively spozhivayya given resource, you can win and less.

There are no radiators on microcircuits, cables for antennas are soldered to the board, a place for a console rosette has been transferred.

In general, it can be seen that the maker tried to optimize the variability of the model without any flaws in its characteristics. For example, only a few light-emitting diodes (moreover, one of them, which shows the presence of life, is not programmatically checked), the WPS button and the dropdown, which are contacted with roses, are disabled.

The main testing of the router was carried out with firmware 3.0.0.376_3754. Dodatkovo we misinterpreted the robot with an alternative firmware version, as described below.

Improvement and opportunity

We will look at the regular software security of the router in the same way as earlier models for the blame for the availability of the USB port and other functions. The design and organization of the web interface appeared to have been broken for a long time, at the thought of the clerk, the floorings are far away, what the company changes in them is rare.

Let's look briefly at the possibility of the firmware of the router. On the side of the "Map of Merazh" there is basic information about the flow mill of the router and clients.

For connecting to the Internet, IPoE, PPPoE, PPTP and L2TP modes are supported. Possibility of access to the operator's local network when working with the provider's access server.

DDNS client transfer, including work with Asus's own service, NAT Passthrough for various protocols, IPv6 implementation in decal modes. For access to local services, DMZ, UPnP and setting up the port translation rules are required. The router supports the work with IPTV services with different multicast stations, visible port of the set-top box and tagged traffic. Є also vbudovaniya service UDP-proxy.

Adjusting the local segment of the traditional network - you can change the address of the router, adjust the range of the DHCP server address, reserve addresses for clients, add additional entries to the routing table.

Built-in wireless access point supporting modern security technologies, including WPA / WPA2 with a password and a RADIUS server, can regulate air pressure, can turn on according to the schedule (one range per hour on business days and one on weekends).

Also, the settings page for additional parameters, MAC address filter, WPS and WDS functions. Koristuvach can organize up to three guest meetings with powerful names and options for hosting.

Firewall router and DoS protection module. The first one has a URL filter, keywords in messages and services. The rest can be worked out for the distribution, and the rules specify the addresses and port numbers of the dzherel and recognition.

The "Father's Control" function allows you to select an hour for the skin client to work with the Internet for a week, up to a year.

Oskіlki firmware unification, realizuvati VPN services it was easy. A PPTP server and a client with PPTP and L2TP support can be used to organize secure remote access to shared resources.

Smaller, in our opinion, the choice of traffic management system, shards of attachments can be brought to the budget class and with active QoS and high demand, the total security of access to the Internet can be significantly reduced.

Diagnostic tools are represented by the ping, traceroute, nslookup and netstat utilities. For whom you can distribute the koristuvach, you can use the WOL function to include the livelihood of clients in the local area.

The set of system options is also not recognized by anything original - changing the administrator's password, changing the robot's configuration, updating the firmware, setting the year. Let's guess that this browser gives access to the router's console using the telnet protocol. If in this case, for the availability of USB ports, it's not really relevant.

Asus solutions have a lot of control over the robotic syslog, you can view the list of non-drot clients, as well as the DHCP server address tables, routing, port translation and NAT streaming sessions.

Alternative firmware

The MediaTek platform variant allowed us to transfer to Denmark an alternative firmware, created by our spіvvіtchiznik. The size of the USB port in this model, significantly reduces the ability to expand the set of functions of the router, but Corresponding services were implemented to non-standard solutions of the retailer. But you need to be aware that for a mass koristuvach, there will be a lot of them without and folded.

Vtіm, optimization of the code and correction of pardons, insanely, to become in favor of everyone. Unfortunately, not all problems can be fixed with a new firmware. Zocrema, incorrect initialization of the tethered commutator in order to bring up the connection for a certain hour of all the router's wired clients to the operator's tether at the time of the re-attachment I will add. To correct this situation, you can update the version in the router presented on the designated project site.

Guess we have already tried all the software in the test model Asus RT-N65U. In addition, a lot of information is presented in, dedicated to this product. Therefore, here we describe only the main features of the product for RT-N11P. For the test, version 3.4.3.9-091_base was tested, it can be changed to yak (and turn to the standard firmware) in the standard way through the web interface. The further description can be seen by itself until the modification is completed.

The old look of the interface is commemorated to the design of the original firmware. However, all the same, the most significant optimizations, corrections and thorough efforts are being made in the development of software modules.

The Russian and English versions were transferred, and the finishing touches were made for fixing the locks. on the start side provide additional information about the router's operation, screening indicators for the processor and operational memory, and cross-posting on the other side for quick access to popular options.

Like in the original firmware, here you can find the VPN server and client. With this stench, three protocols are supported - PPTP, L2TP and OpenVPN.

Low-demanding traffic management system (QoS) the author turned off, but left out the basic function of monitoring security via interfaces. Graphs are also used for occupancy of the processor and operational memory, which can be useful for the analysis of work and I will add to the opportunism.

Wireless access point, for an addendum to basic nalashtuvan, Ability to work according to the distribution, filter MAC address, select the intensity of transmission and the number of streams, as well as the number of special parameters and modes.

It is allowed to organize a guest access point to the highest settings to protect and exchange access to the main segment of the local network. Also, it is possible to introduce a fixed security connection of clients, which allows “free of charge” from the point of view of the increase in the interest on the processor to encircle the security of their work.

В налаштуваннях локального сегмента мережі додана можливість форсування швидкостей провідних портів, відключення 802.3az (Energy Efficient Ethernet, вимикання може допомогти поліпшити якість підключення на деяких лініях), розширені набір можливостей сервера DHCP і функції роботи з IPTV (зокрема використовується апаратна технологія IGMP / MLD snooping , which allows more efficient processing of multicast traffic on wired ports).

For connecting to the Internet, there are IPoE, PPPoE, PPTP and L2TP modes, as well as special options for other providers. Several variants of work with the IPv6 protocol have been implemented.

When the DDNS client wakes up, having received the support of two dozen services. For access to systems in the local segment, there are DMZ, UPnP, NAT-PMP and PCP, as well as manual configuration of port translation rules. Allow VPN traffic to pass through NAT and ALG.

The firewall has a presence side to configure blocking by URL, MAC-addresses and programming rules on LAN / WAN segments from the assigned address and ports of systems. For all lists, you can twist the layout of their work.

System options, except for the standard dialing with password, configuration, firmware and hour, the ability to change the number of the web interface port, the inclusion of access to the console via telnet and ssh, direct access to the console for the implementation of interactive commands and other capabilities.

At the “Personalization” branch, you can change the WPS / Reset button. For a short period of time, the onslaught can be attributed to the control of light diodes on the case, a wireless access point, Internet connections and other functions.

In addition, here there is a service for assigning the status of an Internet connection to a variety of calling hosts and the ability to launch scripts at the current logins.

Transferring control will become all interfaces, including the review of connected droto-free clients and their parameters.

Like in the original firmware, system log, DHCP server tables, port translation, routing and streaming links. The robot is supported by the Syslog server.

productivity

The model has already been designed to position itself in the mass budget segment. So scho nabіr main vim could do simple - stable work with internet on speeds up to 100 Mb/s and service of a wireless network for smartphones and tablets.

Change the firmware version of the sum with Beeline Internet when connected via the L2TP protocol. The call is stable, there is no respect for robots up to speed. The advantage of looking at a p2p client is also very much under the power of the router, while ensuring a high speed of work on a level of 8-10 MB / s. But in this case, it’s better to install in the programs of exchange on the security and the number of connections, otherwise you’ll have to take the entire Internet channel and all the resources of the router, so it will be uncomfortable to use other services. Vtіm, tsіlkom admissible behavior for I will attach this class. Similar consideration should be paid to one-hour zavantazhennym files in the review of IPTV through multicast broadcasts - without borders for a p2p-client, the picture can be "rozsipatisya". With a reasonable desire for a router before watching TV shows, including via Wi-Fi, there are no complaints.

Testing on the stand was also carried out with two firmwares described above - standard and alternative. So there are more graphs in this material. The first pair presents the results of assessing the speed of routing in IPoE, PPPoE, PPTP and L2TP modes when working with one / two streams and sixteen streams.

Oskіlki we already know about this hardware platform, that yakіst Asus firmware we know that high results do not call out a miracle. As for the alternative version, it performs better than the original one, which is especially noticeable in full-duplex tests with PPTP and L2TP protocols.

Protect the robot from the provider’s network with a VPN connection. Before robots in this scenario, there is no respect for them.

In the future, we checked the VPN server with the PPTP protocol with the usual options for connecting to the Internet and modes without encryption and with MPPE128. On the graphs, averaged for three scenarios (reception, transmission and the next duplex in chotiri streams in the skin fall) indications.

Persh for everything, it’s best to respect the situation for more high results in this test with an alternative firmware. So that among your tasks is the implementation of remote access to your home, the recommendation is to win an alternative version of the software fully primed.

The TP-Link TL-WDN4800 adapter (802.11n, up to 450 Mb/s) was tested to test the speed of a robot and a wireless access point. The tests were carried out in one / two streams and eight streams. The router has been tuned for maximum performance with WPA2-PSK AES and a wide channel. Three variants of the location of the dartless client were reviewed: more meters of direct visibility, more meters behind one wall and more meters behind two walls.

First, comment on the results, let's guess one more time, what today dartless call in the range of 2.4 GHz in the minds of men can be absolutely untransferable through a large number of networks and other transitions. So it is necessary to be careful with the technical characteristics.

As we know, in general, the firmware shows close results in the test. As for the absolute values ​​of the security, then the stench completely shows the hardware configuration of the router.

visnovki

Insanely, respect for such a great company, like Asus, you can only get to the mass segment. Router RT-N11P, regardless of the obvious signs of economy, may be inconsiderate design, high quality of workmanship, fully respects the name of the virobnik, expansions of the set of possibilities and daily productivity.

The MediaTek platform widow allowed in the routing tests to reach practically the maximum indicators for a given hardware configuration. So that the router can be boldly recommended to coristuvachas, be it tariff plans with speeds up to 100 Mbit / s inclusive.

With additional capabilities, I will add significant support for IPTV technologies, guest wireless networks, as well as the presence of a VPN server and the functions of a father's control.

Add the model privacy and the possibility of installing an alternative version of the software. Irrespective of the size of the USB port, for which the sound is connected to the nameless add-on services, the list of permissions in the standard firmware is significant, and many of them are more or less cica and brown. At any point, the visibility of security can be changed in singing scenarios.

The router is already on the vіtchiznyany market. For the variant, the model turned out to be quite competitive in its segment.

In this help, we will look at the most simple option asus settings rt n11p, and in some statistics it is also possible to add additional capabilities to manage the router.

Asus rt n11p router connection

On the back, let's briefly look at the characteristics of the asus rt n11p router.

on the top panel I will add a distribution block of indicators (total їх 4):

• - indicator of connection to the line;
• - an indicator that shows a working Wi-fi access point;
• - indicator that shows the connection to the Ethernet cable;
• - indicator that characterizes the connection to the router asus rt n11p outbuildings, For help Lan cable.

On the back panel of the router, you can see:

• - a button that resets the asus rt n11p router to factory settings;
• - 4 slots for connecting a Lan-cable (for connecting a router to a computer);
• - slot for connecting an Ethernet cable;
• - roses for connection of living in the area;
• - router power button
• - roses for connecting to the router wi-fi antennas, which reinforce the signal of the wireless network.

How to independently install the asus rt n11p router?

For the beginning of the installation, it is necessary to connect the router to the meal, for the help of the one supplied with the living unit (after connecting to the wire and pressing the power button on the front panel of the router, the wire indicator will light up).

Under the hour of setting up a new router, you can boldly go to the next point. As soon as the router is in operation, it is necessary to first reset the settings of the asus rt n11p router to the factory settings. In order to press the drop button, hold it down for a few seconds and check the re-adaptation of the add-on.

When setting up a router, it is recommended to use a Lan-cable, which is connected from one side to the socket lace pattern laptop / computer, and from the other - into one of the four free ports on the rear panel (if one more indicator lights up on the indicator panel -).

Now you can connect an Ethernet cable (provided to you by your ISP). After connecting with Ethernet, one more indicator will light up on the router.

On this, the installation of the asus rt n11p router is completed, and you can proceed without delay until the device is installed.

How to get into the setup of the asus rt n11p router?

To “get” into the router, it is necessary to launch a browser installed on the PC, and in the address bar, type the ip-address of the router (indications on the service sticker on the back panel of the annex) - for our example, the combination of numbers 192.168.1.1 - and press Enter .

You will appear in the authorization window with the fields for entering the login and password. For locking (at the first login) login: admin and password: admin. Once the authentication data has been entered, the “Enter” button is pressed.

Here you will be automatically prompted shvidke nalashtuvannya asus rt n11p router:

Corrugated on the first crochet physical record asus rt n11p router. You will be asked to set your password to enter the router settings instead of the standard "admin".

After changing the password, go to the next step in the settings of the asus rt n11p, the router will automatically select the type of connection to the Internet.

As the provider, when the contract is laid down, having given you a login and password for koristuvannya by the Internet, you will need to enter them up to the default fields of the setup manager.

After setting the connection, press the "Dal" button.

final stage wifi settings the router is used in the installation of the Wi-Fi access point.

For locking (with factory settings) for connecting to a wireless network, a password is not required, and whether it is a third-party PC, which has been used in the router's coverage area, you can seamlessly connect to your access point.

At a vіknі, you will be prompted to enter “Im'ya merezhі” and “Key of the merge”, de “im'ya merge” - it looks like a joke without a dart network I will name your access point, and “merezhіy key” is a password that will be needed for connection until the end of the line.

Pochatkіvtsіv koristuvachіv often blame nutrition, like revantaging asus router rtn11p. For which it is enough to turn off the life of the router for 10 minutes, after which turn on the attachment and get it to start again

Added capacity of a Wi-Fi router.

In this section will be reviewed dodatkovі nalashtuvannya Wi-fi movement and the possibility of updating the firmware I will add.

- How to correctly install the add-on wifi?

The configurable wifi panel is set up in the main menu of the setup wizard (zliva).

main function detailed settings arborless security measures to change the type of data encryption when transferring to the terminal attachments (since not all attachments support the type Wpa encryption, Wpa2 і Psk, vіdpovіdno, persh nіzh nalashtovuvaty dans point it is necessary to clearly understand the need to try)

For example, the PSP portable console does not support more advanced encryption types, and to connect to Wi fi, you will need to change the encryption type to Wep (Wpa).

To update the firmware of the router, you also need to drive (just to update the version of the software on the router there is no sense, and if you choose the wrong driver or the firmware version, you can “bring” the device to the point where you can only be helped in the service center).

The menu for updating the firmware is expanded at the deposit: Administration / updating the firmware.