Cheats for Android settings. Secret codes for Android - how to manage your own gadget using
The term "secret codes for Android" refers to such combinations of characters that were originally intended for testing devices that have this operating system installed.
With their help, developers are checking phones and tablets before being sent for sale. And their total number reaches several dozen.
The introduction of a certain sequence allows you to receive data or perform actions that are not available to ordinary users.
Contents:
Features of "secret" ciphers
Many users who are faced with the need to take advantage of such commands may have a reason for their secrecy.
First of all, this name was given to a combination of symbols and numbers due to the fact that most owners do not need them.
And in the instructions of the mention of these commands are missing.
To use any of them, you must enter the “Phone” application dialer (green or blue handset on the main screen).
For tablets without a 3G module, this is not possible by default.
And in order to run the codes, the user must download a special application, finding it in the query "Dialer".
Combinations for any gadget on Android OS
Information sequence allows you to get information about the various characteristics of the device and its individual elements:
- *#06# - about the IMEI number;
- *#*#4636#*#* - about the battery and Wi-Fi network;
- *#*#44336#*#* - about the firmware, including the CSC number and the build date;
- *#*#232338#*#* - about address wireless network;
- *#34971539# - about gadget cameras;
- *#*#1234#*#* (although * # 2222 # works more often) about the firmware.
As you type *#*#1111#*#* can get on screen version information software.
Introduction *#*#2222#*#* Shows data about the board.
Information about the version of the sensor will show the code *#*#2663#*#* on RAM - *#*#3264#*#* and the Bluetooth address data is *#*#232337#*#*.
Commands for testing and testing
To test the device has its own group:
- service check Google talk provides consistency *#*#8255#*#* ;
- to test the display - *#*#0*#*#* ;
- for testing different parts (from camera to microphone) - *#0*# ;
- for the audio test - two at once: *#*#0673#*#* and *#*#0289#*#* .
You can check the backlight and vibration by entering a combination *#*#0842#*#* .
Test with the command *#*#232339#*#* and additional *#*#526#*#* .
Checks are done by sending commands. *#*#1472365#*#* (for the usual test) or *#*#1575#*#* .
Bluetooth network checked through *#*#232331#*#* .
A few more useful commands allow you to test the performance of the screen ( *#*#2664#*#* ), motion detectors ( *#*#0588#*#* ) and GSM module ( *#*#7262626#*#* ).
And input *#197328640# provides a transition to service mode.
Dangerous combinations
There are several options, introducing which, you can make serious changes to the system without the ability to return to its original state.
These include, for example *#*#7780#*#* and *2767*3855# .
The first provides a reset of all settings and removal of user-installed applications, the second command leads to a complete reinstallation of the system.
Combination *#*#7594#*#* allows you to get rid of the shutdown menu - when you press the corresponding button or will automatically turn off without asking anything from the user.
Code selection *#*#8351#*#* needed to enable registration voice dialing, but *#*#8350#*#* - to turn off this mode.
Sequence #*5376# is used to erase messages, and several combinations for Android type #*3876# , #*3851# and #*2562# reboot the gadget.
Special codes for products of individual manufacturers
There are several combinations that are suitable only for certain models or brands of gadgets. They can be reduced to a small table.
| brand, model | Team | Act |
|---|---|---|
| Sony | **05***# | unlock PUK code |
| LG, G3 | 3845#*855# | entrance to the service menu |
| Samsung Galaxy S4 | *#0011# | go to menu |
| HTC | 3424#
33284# | start the diagnostic process network status information |
| Motorola | *#*#786#*#*
*#*#2486#*#* | reset all settings transition to the built-in menu |
In addition to these, there are other commands. Find them to help special application Secret Codes from PlayMarket. With it, you can detect even those that are not in the list.
You should know: Not all of the sequences, even universal ones, will work on every smartphone. Restrictions on the use of a secret combination can be either independently reinstalled operating system, taken not from the official site, but from third-party sources.
Secret codes are certain combinations of characters, by entering which you can get this or that information or access to some hidden functions. It is impossible to predict when and in what situation these codes may be needed, but it is better to get acquainted with them in advance.
So, secret codes for Android-smartphones and other devices will help you to find out additional or hidden information about the hardware stuffing of your mobile device, to make a complete reset, and so on. It is worth careful to use them - often changes are irreversible, and, for example, after resetting to factory settings, you will have to restore them completely manually. Well, let's sort all the secret codes in order.
*#*#4636#*#*
This code will display on the screen information about the mobile gadget, its battery, history of the battery, as well as statistics on the use of the device.
*#*#7780#*#*
The code completely resets to factory defaults, including settings google accountwhich is stored in the device, settings and data operating system and various installed applications, removes downloaded applications. System applications and programs that are immediately available are not removed from the box, as well as data on a memory card, such as photos, videos, music, and so on. Before resetting the settings to factory defaults, the user is asked to confirm, so even if the code is entered incorrectly, you can not confirm its execution.
*2767*3855#
The code that is used for factory formatting. When this happens complete removal absolutely all files and settings, including those stored in internal memory. The secret code also reinstalls the firmware of an Android device. After its introduction, the only way to prevent undesirable consequences is to quickly remove the battery from the mobile gadget and recover data using a computer.
*#*#34971539#*#*
Secret code to access the integrated camera mobile device. After its introduction, you get access to 4 menus: updating the camera’s firmware (it is strongly not recommended to perform this action, very often choosing this option leads to errors or camera failure), updating the camera’s firmware on the memory card, obtaining basic information about the current camera firmware, update history of the camera firmware.
*#*#7594#*#*
Code to change the action on pressing the "End Call" or "Enable / Disable." Usually, by default, after a long press of a button, a menu appears that provides you with a choice of actions such as switching to silent mode, air mode, or turning off the device. You can change the actions by simply pressing the direct shutdown.
*#*#273283*255*663282*#*#*
The code to call me to copy files, you can run it backup media data stored in the memory of a mobile device, such as photos, music, and so on.
*#*#197328640#*#*
Secret android code to call the service mode, with which you can run different tests and change the charging settings.
*#*#8255#*#*
Launch GTalk service screen.
*#*#232339#*#* or *#*#526#*#* or *#*#528#*#*
Secret codes for running WLAN tests on Android devices. To run the tests, you must press the "Menu" button.
*#*#232338#*#*
This code shows the WiFi MAC address of the mobile device.
*#*#1472365#*#* or *#*#1575#*#*
The code to run the device's GPS tests
*#*#232331#*#*
Test built-in Bluetooth.
*#*#232337#*#
The code that displays the Bluetooth address of the mobile device.
*#*#4986*2650468#*#*
Code for information on firmware PDA, smartphones, H / W, RFCallDate.
*#*#1234#*#*
Code for information on firmware smartphones or PDA.
*#*#1111#*#*
Displays the FTA SW version.
*#*#2222#*#*
Displays the FTA version of the HW.
*#*#44336#*#*
Displays information about the firmware of smartphones, PDA, CSC, Changelist numbers, built-in time.
*#*#0283#*#*
Run Packet Loopback.
*#*#0*#*#*
Run the built-in LCD test.
*#*#0673#*#* or *#*#0289#*#*
The code to run the audio test.
*#*#0842#*#*
The secret code for the test backlight and vibration of the mobile device.
Many users of smartphones and tablets on Android do not even suspect the existence of so-called engineering or service codes. Service codes on smartphones and on ordinary phones appeared much earlier than the first version of the Android OS. They are intended primarily for service engineers and advanced users, so we immediately want to warn readers: if you don’t know what this code is for, then you shouldn’t enter it, and if you decide to enter the code, then you do it at your own risk. It is worth thinking before entering any code for “Android”, because This can lead to partial or complete data loss and damage the device itself. If you decide to use codes, let's consider each engineering code more details:
* # 06 # - Learn IMEI;
* # * 4636 # * # * - Details and settings;
* # * 8351 # * # * - Voice Dialer Logging Enabled;
* # * # 4636 # * # * - This code can be used to get interesting information about the phone and the battery. It shows the following 4 menus on the screen:
- Information about the phone;
- Battery information;
- Battery statistics;
- Statistics of use.
* # * # 7780 # * # * - This code resets the following settings to the factory settings:
- settings of your Google-account stored on your smartphone;
- data and system settings and applications;
- downloaded applications.
The code does NOT delete:
- current system applications and applications supplied with the smartphone;
- data on the SD card (photo, video, etc.).
PS: Before resetting the settings, the smartphone will ask for confirmation, so until the very last moment you will have a chance to change your mind.
* 2767 * 3855 # - Think before entering this code. This code is used for factory formatting, that is, it starts deleting all files and settings, including those stored in internal memory. He also reinstalls the firmware of the smartphone.
PS: After entering the code, there is only one way back - quickly remove the battery and start data recovery through the PC.
* # * # 34971539 # * # * - This code is used to get information about the camera of the phone. It shows the following four parameters:
- Updating the camera firmware in the image (do not try to repeat this option);
- Update the camera firmware on the SD card;
- Get the camera firmware version;
- View how many times the firmware has been updated.
ATTENTION: Never use the first option, otherwise your phone camera will stop working and you will have to carry the phone to the service center to reinstall the camera firmware.
* # * # 7594 # * # * - This code can be used to change the mode of the End / On / Off button. By default, after a long press of a button, a screen will be displayed with a suggestion to choose any option: “Switch to silent mode"," Flight Mode "or" Turn off the smartphone. "
You can change the proposed options using this code. For example, you can make the phone turn off immediately, without choosing the desired option from the menu.
* # * # 273283 * 255 * 663 282 * # * # * - The code opens the file copy screen, where you can do backups your data (photo, audio, etc.)
* # * # 197328640 # * # * - This code can be used to enter maintenance mode. You can run various tests and change the settings in service mode for WLAN, GPS and Bluetooth;
* # * # 232339 # * # * or * # * # 526 # * # * or * # * # 528 # * # * - WLAN (use the "Menu" button to start various tests);
ZDARRRRRRRRRRRRRRRRRRRRRRROV;)
Dug in the Internet:) I WOULD NOT EXPERIMENT IN YOUR PLACE :)))
Samsung
*2767*3855#
Full reset EEPROM (removes SP) changes IMEI to 447967-89-400044-0
*2767*2878#
User reset EEPROM, eliminates "freezes", errors, blocking
Software version
*#9998*523#
Change display contrast
X120
*#1234#
- Firmware version
*#9998*8376263# - Phone information
*#4777*8665# - GPRS setup
*2767*2878# - Reset all user EEPROM settings
*#4357# - Help codes
*#9998*5646# - Change logo language when loading (P VODA - Russian)
*#9998*377# - NVM error log
*#0842# or *#9998*842# - vibration test
* # 0289 # or *#9998*289# - Test flashers
*#0228# or *#9998*228# - Battery status
*#0778# or *#9998*778# - SIM table
*#0638# or *#9998*638# - SIM network identifier
*#0746# or *#9998*746# - SIM information
*#9998*76# - Product Number
*#9998*8632# - Shows your wap bookmarks in the body
*#9324# or *#9999*0# - netmonitor
*#92752823696# - WAP settings
*#32436837# : Digital Audio Interference On
*#3243948# : Digital Audio Interference Off
*#0782# : Turn on the phone
*#1111# : Rev.X1 1.0
*#2222# : HWver: Rev.0.9
*#92782# : WAP UserAgent
*#927827# : WAP UAProfile
*#22766# : Automatically receive a call
*#227633# : Manually receive a call
Samsung
E700, X100, etc.
#*7337#
Unlock, reset EEPROM
Samsung X100
*#8999*8378#
Service menu
Samsung S500 (new)
*2767*688#
Unlock, reset EEPROM, Removes all SP-locks
*#7465625#
Lock information
*2767*3855#
unlocking
S100, S300, V200
*2767*7822573738#
unlocking
A300, A800
*2767*637#
unlocking
LG
— 200
* 789 # + Call
LG - 600
2945#*
(hold)
Service menu, unlock
View firmware version
2947#*
Unlock
LG - 5200
2945#*#
2945#*1#
Service menu, unlock
Second service menu
LG - B1200
# and On together, then 668
Service menu, unlock
*6861#
Initialization after boot
LG - B1300
# and On together, then 159
Service menu, unlock
2945 #*#
Service menu, unlock
Alcatel
25228353
BE4, BF3, BF4
83227423
BE1, BE3
25228352
BE5
83227423 or 25228352
Bh4
83227423
Bg3
83227423
Alcatel
#847#
Master reset
Alcatel
#337*07#
Sony
*#7353273#
Full reset, clear memory and factory settings
#847#
Full reset, clear memory and factory settings
#337*07#
#765*02#
block the phone into a category (SIM card, network, subnet, corporate)
#765*05#
Lock) No features available.
#765*07#
(Delete) delete network (category)
#765*08#
(Unlock) unlock network (category)
#765*78#
deactivate the network (and other categories). After deactivation, the category disappears from all menus. When choosing, for example, Add -\u003e Network, when requesting New Data, enter a five-digit network code, for example, 250-01 for MTS, and then double the 12-digit Network Code - the unlock code, which will be asked when you install another SIM , rather than specified, operator. Particularly useful here may be the function of a SIM-card lock, which exists in many more expensive phones.
SIM settings
** 05 * PUK *
new PIN # @
PIN settings
** 052 * PUK2 *
newPIN2 # @
002#@
cancel all call forwarding
004#@
cancel all conditional redirects
21#@
disable and deactivate unconditional forwarding
62#@
turn off and deactivate "not available"
67#@
turn off and deactivate busy forwarding
Siemens
SX1
* and # + ON
formatting
Fly
688
# 8000 # then # 3676 #
Without Sim: * then on the joystick 3 times down, 3 times up.
FLY FT10
4268#*
Hold
Philips Genie
*#7489*#
shows the secret code of the device
*#3377*#
lock information SIM cards, Init and Flags
Fisio 311
*#7728*#
1. Backlight: 10 seconds !!!
2. Sound: Sonar, volume: medium
3. Goal teams and mountains. keys: clean
4. Call counters: by zeros
5. Call list: pure
6. Ed. any button: off
7. Auto. block. keys: off
8. From the menu, the items “Initial Screensaver” and “Text Welcome” disappeared !!!
BUT [email protected] 288
*#8272*#
UCS2 on / off (something related to SMS and encoding)
*#7728*#
New philips
#20021208#
Master reset
Trium
* holding 5806
Firmware version
** 04 * PIN * PIN * PIN #
Remove SP lock
* holding 4329
Activates and deactivates NETMONITOR
* holding 621342
Activates and deactivates another NETMONITOR
* holding 3926
turn off the phone
* holding 5472
eat mode for data cable
Hold * 65512890
format
Trium Mars *
* holding 476989
NS Lock Menu
* holding 482896
CP Lock Menu
574243
NS Lock Menu
967678
SP Lock Menu
362628
IMSI Lock Menu
787090
Lock net.level
Motorola
00**8378633*
00**83786633*
Test Mode Off
Test Mode On
048263*
Test mode to dial quickly do without a SIM card
Without sims enter *#06#,
048263*
test mode
Motorola acer
T191, T205, T2688
Motorola T205
* # 0000 # OK
default settings
* # 300 # OK
firmware version
* # 307 # OK
engineering menu
* # 403 # OK
factory identifier
* # 311 # OK
Change the phone code to the default code.
Motorola C200 and some others
20010903 or 19980722
User code
P2K
048263*
TEST mode
32*279*1*0*8
Model
32*383*1*0*0
Flex ver
18*0
Master reset
18*1
Master clear
4*5*1
Microphone / speaker check
32*116*1*0*0
Read phone code
32*118*1*0*0
Read security code
10*0*6
900/1800 range selection
54*18*1
full phone reset
*#9922#
without SIM card
menu entry, general reset
*#7370#
Reset
Pantech
*01763*3641#
*01763*6371#
*01763*737381#
"Demolishes" user code 100%
Panasonic x 300
Panasonic G50,51,55,70
*01763*737381#
Voxtel
pressed the sos button and entered the code while holding * and he showed the code for 3 seconds
Vk mobile
VK207 855855#*
VK107 85558555#*
For unlock phone code hold # and digit 0124
* - hold for 3 seconds.
* - hold for 3 seconds.
TSM7
*#9374
SiemensST55
*01763*737381#
Sagem
Without a card you dial * 226632623X7, where X = 4 or 5 for your phone and after setting the time, you get a menu where a strip crawls across the screen. PHONE, go in and erase it
Maxon
*#9915#
Nokia
3650
* + 3 + trubka + power
All about SIM lock on cell phones Trium
M4-Astral / Galaxy, Aria / [email protected], Geo / [email protected] and M5-Mars / Neptune) 6 levels of SIM-blocking are provided:
Net-Lock - this is the binding to SIM-cards by MCC / MNC.
IMSI-Lock is a binding to a specific SIM card by its IMSI number.
NetSub-lock (NS-Lock) - most likely binding to the subnet. Finally, the meaning is not clear.
Corp-Lock (CP-Lock) - most likely a binding to cards with possibility of CUG (Closed User Group). Actually, it was not possible to verify, as domestic operators do not provide these services and the phone refuses to enable this lock.
ServProv-Lock (SP-Lock) - perhaps also some level associated with the CUG. With our SIM cards, the phone refused to turn it on.
Ext-Lock - apparently reserved lock, that is, data on the lock is reserved in memory, but not really used. You can control locks on Trium in two ways - through the locks menu from the telephone keypad or through the debug mode (Test Mode). Through the lock menu, you can turn off and turn on the lock levels Net, IMSI, NS, CP, SP. After entering the menu, you need to enter the lock or unlock password (depending on the current lock status). These passwords are stored in the phone's memory. Passwords consist of 8 digits. Each blocking level is associated with a password attempts attempt (the default is 10). If you incorrectly typed the unlock password 10 times, the phone enters the permanent lock mode (Permanent-Lock) and does not even check the SIM card at the next launch (does not request PIN1) and displays the message Phone Permanently Locked. Permanent-blocking can be removed only through the Test mode. Table 1 shows the exit codes in the lock menu (as well as many codes on Trium are dialed when you hold the key.
Exit codes in the lock menu.
Net 787090 or 787292
IMSI 362628 or 360608
NetSub (NS) 476989
Corp (CP) 482896 or 480896
ServProv (SP) 967678
Also, each individual level can be disabled (LOCK_DISABLE) and its menu is not displayed. When you turn on the lock, the binding data is read from your SIM card (for Net-Lock it is MCC-MNC, for IMSI-Lock it is IMSI, for others something else). When you turn off the lock data about it is deleted. After successful operation, Lock ON or Unlock ON is displayed.
To manage locks through TestMode, you need a data cable and a computer.
SIM-blocking.
Management of SIM-locks is possible in three ways reading / writing the MCC / MNC list for Net-locking. In fact, you can add up to 20 values to the list, but if you entered more than 12 values, the lock does not work, and if it is less, only the first 8 values are valid. That is, it is possible to link not to one operator, but immediately to eight.
read / write IMSI list.
read / write lock status, lock / unlock passwords via menu, binding data (all except Net and IMSI). The MSTools2000 1.0 has the following utilities for operations with SIM-locks: showlock - displays information about all всех sim-locks ’and‘ permanent-locking ’, displays passwords for controlling locks from the keyboard. If LOCK_UNKNOWN is displayed in blocking states, this is a sign of incompetent unlock. The same can be said about the situation when there are more than 20 values in the MCC-MNC or IMSI list ( more value counter). Purely unlocked phone - gives empty lists of MCC-MNC and IMSI plus the normal state of locks (LOCK_OFF or LOCK_DISABLE).
unlock - turns off ‘permanent-lock’, turns off all sim-locks ’, clears lists of networks and IMSI. The ability to manage locks through the phone menu remains.
dislock is the same as unlock, only prohibits ‘sim-blocking’. After that, they are turned off and the ability to manage them through the phone menu is disabled.
Secret codes for Mitsubishi Trium phones
06 - Shows serial number phone (imei)
0000 - Sets English in the menu
0007 - Sets the Russian language in the menu (if it is of course)
Hold * and simultaneously 5806 - shows firmware version (SW)
Hold * and simultaneously 5807 - shows the firmware version (HW)
Hold * and simultaneously 936505 - shows firmware version (SW and HW)
Hold * and simultaneously 5472 - Enter Test mode. The display on the phone lights up M4 Test Mode or M5 Test Mode. Thus, you can determine which category (M4 or M5) your phone belongs to. And accordingly, we can conclude - what set of programs to use.
Hold * and simultaneously 4329 - Activates and deactivates NETMONITOR
Hold * and simultaneously 621342 - Activates and deactivates another NETMONITOR
Hold * and simultaneously 3926 - turn off the phone
Hold * and simultaneously 850696 - “warm” start (enable / disable)
Hold * and simultaneously 476989 - NS lock menu
Hold * and at the same time 482896 - CP lock menu
Hold * and simultaneously 574243 - NS lock menu
Hold * and simultaneously 967678 - SP lock menu
Hold * and simultaneously 362628 - IMSI lock menu
Hold * and at the same time 787090 - Net lock menu
Online codes
** 04 * oldPIN * newPIN * newPIN # @ change PIN
** 042 * oldPIN2 * newPIN2 * newPIN2 # @change PIN2 code
** 05 * PUK * new PIN * new PIN # @ unlock PIN
** 052 * PUK2 * newPIN2 * newPIN2 # @unlock PIN2 code
Call Forwarding, the service must be ordered from the operator
002#@ cancel all call forwarding
004#@ cancel all conditional redirects
** 004 * number # @ activate all conditional redirects
21#@ disable and deactivate unconditional forwarding
#21#@ deactivate unconditional forwarding
** 21 * number # @ enable and activate unconditional forwarding
*21#@ enable unconditional forwarding
*#21#@ check unconditional forwarding status
61#@ turn off and deactivate "no reply"
#61#@ deactivate "no reply" redirection
** 61 * number # @ Enable and activate "no answer" redirection
*61#@ enable forwarding "no answer"
*#61#@ check forwarding status "no answer"
62#@ turn off and deactivate "not available"
#62#@
deactivate forwarding "not available"
**62*
number # @ enable and activate call forwarding "not available"
*62#@ enable forwarding "not available"
*#62#@ check forwarding status “not available”
67#@ turn off and deactivate busy forwarding
#67#@ deactivate busy busy
** 67 * number # @ enable and activate busy forwarding
*67#@ enable busy forwarding
*#67#@ check the status of forwarding "busy"
** 61 * number ** sec # @ setting the time of the call before the “no answer” call forwarding. Sec - wait time in seconds (from 5 to 30), delete previous installation can be like this: 61 # @. Those. when setting the “no answer” forwarding, you can set the time in seconds that the system gives you to pick up the handset. If during this time you have not picked up the phone, the incoming call will be forwarded.
Call barring
** 33 * password # @
# 33 * password # @
*#33#@
** 330 * password # @ activate call barring
# 330 * password # @ deactivate call barring
*#330#@ check the status of barring all calls
** 331 * password # @ activate barring all outgoing international calls
# 331 * password # @ deactivate all outgoing international call barring
*#331#@ check the barring status of all outgoing international calls
** 333 * password # @ activate barring all outgoing calls
# 333 * password # @ deactivate barring all outgoing calls
*#333#@ check the status of barring all outgoing calls
** 35 * password # @ or ** 353 * password # @ activate barring all incoming calls
# 35 * password # @ or # 353 * password # @ deactivate barring all incoming calls
*#35#@ or *#353#@ check the status of barring all incoming calls
** 351 * password # @ activate barring all incoming calls when roaming
# 351 * password # @ deactivate barring of all incoming calls when roaming
*#351#@ check the status of barring all incoming calls when roaming
**03*330* oldpassword *
newpassword * newpassword # @ change password for all prohibitions (initial - 0000)
Call Waiting, the service must be ordered from the operator
*43#@ activate call waiting
#43#@ deactivate call waiting
*#43#@ check call waiting status
Caller ID (CLIP), the service must be ordered from the operator
**30#@ activate caller ID
30#@ deactivate number identifier
*#30#@ check the status of the number identifier
Anti-caller ID (CLIR), the service must be ordered from the operator
**31#@ activate anti-caller ID
31#@ deactivate anti-caller ID
*#31#@ check the status of the number anti-identifier
*31#[email protected] activate the caller ID for this phone number
#31#[email protected] deactivate the caller ID for this phone number
Caller ID when forwarding (COLP), the service must be ordered from the operator
*76#@ activate the service
#76#@ deactivate the service
*#76#@ check service status
Call number anti-caller (COLR), the service must be ordered from the operator
*77#@ activate the service
#77#@ deactivate the service
*#76#@ check service status
*30# phone number transfer your number to the network. This code resolves (outbound / inbound problem).
Maxon phones are divided into at least 4 groups (by hardware implementation)
1. Older models of the MX-32xx and MX-68xx series (also known as MN1 and MN2)
*#9917# then the blocking parameters or SERVICE NOT ACTIVE message will appear if there is no code
2. Models on the Acer / Benq platform. Rotated by cable, IMEI code is not considered.
How to determine: without a card to dial *#300# and press the call button. The firmware version number will appear.
3. Models on the SEWON platform (SG1000, SG2000) are paid by cable, the IMEI code is not considered.
How to determine: look back at the tag
4. New models of the MX-79xx and newer series (aka O2X1 - 7970)
Rotated by cable, IMEI code is not considered. Also, the code can be found by reading the log from the device
How to determine: code *#9917# only works with inserted card
The phone code was set and input attempts were exhausted. This is checked at the time of changing the card, since the phone "remembers" which card was installed last and if it is the same, then the phone code is not checked.
For this situation there are 2 solutions. The first is the use of software that will immediately remove it.
Second: there is a reset code for the counter of attempts, for imei 352063000109332 it is 85336710, but it is not known how to enter it.
In older models this is done through # 9917 * 1 * nnnnnnnn # (Lok himself is removed through # 9917 * nnnnnnnn #) at 7920 # 9917 * 1 * nnnnnnnn #removes the phone code, but what combination in this case, the counter is reset unknown.
It is likely that it should be something like # 9917 * m * 85336710 # or * 9917 * m * 85336710 #maybe also # 9917 * m * k * 85336710 # or instead of 9917 try 9916, 9918, 9919, etc.
In general, if you wish, you can try. The result will be the change of the SIM inscription is blocked to the wrong SIM,
then you need to remember the phone code and enter through # 9917 * 1 * nnnnnnnn #.
The use of some of them can lead to loss of warranty for the phone and even its failure, so act at your own risk.
IMEI Check - * # 06 #
Entrance to the service menu -\u003e *<<*<*
English - * # 0000 #
Software version - # 8377466 #
special lock code<**< (Будте аккуратны с использованием)
Useful codes and secrets Siemens
Changes cannot be made from the menu; they can only be made using the trail. keyboard shortcuts:
** 042 * OldPin2 * NewPin2 * NewPin 2 #
in most cases OldPin 0000.
It is also possible to change PIN2 using trail. Combinations (GSM):
** 042 * OldPin * NewPin 2 #
or using menu 7-4-2, enter PIN2 and then change it by pressing the left key below the screen. (soft key)
Check firmware version
To view the firmware version, press the Menu button and then 9-8-2 and then press the left key under the screen.
Or * # 06 # & “green button” and left key.
Quick change of interface language
Achieved by entering:
* # 0000 # & "green key" = automatic language selection
* # 0001 # & "green key" = English
* # 0030 # & "green key" = Greek
* # 0031 # & "green key" = Danish
* # 0032 # & "green key" = French
* # 0034 # & "green key" = Spanish
* # 0039 # & "green key" = Italian
* # 0049 # & "green key" = German
* # 0090 # & "green key" = Turkish
Speech Encoding Type
* # 3370 # & "green key" = activates Enhanced Full Rate.
The sound quality increases, while the standby time is reduced by approximately 5%!
# 3370 # & "green key" = deactivating Enhanced Full Rate
* # 4720 # & "green key" = activates Half Rate Mode.
The sound quality decreases, but the standby time increases to 30%!
# 4720 # & "green key" = deactivating Half Rate Mode
Turn on the phone without a SIM card
* # 0606 # & left key (soft key)
Restore original settings
You can reset all made changes and get the original, original settings:
* # 9999 # & "green key" = Does not change settings related to network and SIM card
Shortcut Keys
Voice mail (Voice mail) - Press the key<1> and hold for a few seconds
Country codes (International country codes) - Press the key<0> and further left key
Ringer off (Ringer off) - Press the key<*>
Keylock (Keylock) - Press the key<#> and hold for a few seconds.
Increased standby time
Based on SIEMENS materials:
- 1 minute of screen backlight corresponds to 1 hour of work in standby mode.
- 10 seconds of working with the menu corresponds to 15 minutes in standby mode.
- The minute of transmission of the broadcast message corresponds to 30 minutes in the standby mode
- Connecting the phone to another base station is 1 hour in standby mode
- Turning on the phone and its subsequent registration in the network takes 2 hours from the standby mode.
Settings to save battery:
1. Turn on the IR port only if necessary - you can assign one of their programmable keys (8-4-1 or 2)
2. You can customize CB so that you can use one of the programmable keys (8-4-1 or 2) for reading
3. Use the backlight only when necessary (8-5-2)
4. Avoid permanently turning off the phone and then registering with the network.
5. Use vibrating alert only when necessary. Do not use the vibrating alert continuously
. 6. Disable automatic network registration (6-3)
7. The battery in the S25 is quite weak. To save energy, set the s25 to automatically shut off every evening. You can safely turn on the phone in the morning. This option is in the menu under the clock.
8. Temporarily turn off the backlight of the display (the keypad lock must be activated), just press the Hang up button (with a red phone image).
How can I quickly turn off the vibrating alert?
The fastest way is to switch the phone to professional mode (expert mode, see the instructions) and then press three keys successively - Menu - 3 - 5 to enable or disable the vibrating alert.
Some useful codes for almost all Samsung models.
* # 06 # IMEI number
* # 9998 * 228 # -\u003e Battery status (capacity, voltage, temperature) * # 9999 # -\u003e Shows software version
* # 9998 * 289 # -\u003e Change the frequency of the call
* # 9998 * 523 # -\u003e Changing the display contrast
* # 9998 * 842 # -\u003e Test of the vibrator
* 2767 * 3855 # -\u003e Full reset l EEPROM (This code removes the SP blocker !!) But it also changes IMEI to 447967-89-400044-0. To restore your old IMEI, use the appropriate software (at your own risk)
* 2767 * 2878 # -\u003e User Reset EEEPROM
Useful service codes for Samsung phones
output of IMEI-code (International Mobile Equipment Identity) * # 06 #
display software version * # 9999 #
output software version (instructions) * # 0837 #
output of serial parameters * # 0001 #
display adjustment menu * # 0523 #
change display contrast (only for version G60RL01W) * # 9998 * 523 #
* # 9998 * 523 * 0 # (for SGH -Rxxx, -Nxxx)
change the frequency of the call * # 9998 * 289 #
* # 9998 * 289 * 0 # (for SGH -Rxxx, -Nxxx)
memory status * # 9998 * 636 #
* # 9998 * 636 * 0 # (for SGH -Rxxx, -Nxxx)
SIM file size * # 9998 * 746 #
* # 9998 * 746 * 0 # (for SGH -Rxxx, -Nxxx)
SIM service table * # 9998 * 778 #
* # 9998 * 778 * 0 # (for SGH -Rxxx, -Nxxx)
battery status (capacity, voltage, temperature) * # 9998 * 228 #
* # 9998 * 228 * 0 # (for SGH -Rxxx, -Nxxx)
vibrator test * # 9998 * 842 #
* # 9998 * 842 * 0 # (for SGH -Rxxx, -Nxxx)
Set emoticon mode in charging mode * # 9125 #
Set the voice coder mode (normal, headphone, or speakerphone) *#9998*862#
* # 9998 * 862 * 0 # (for SGH -Rxxx, -Nxxx)
Changing serial parameters * 0001 * s * f * t #
debugger screen * # 9998 * 324 #
* # 9998 * 324 * 0 # (for SGH -Rxxx, -Nxxx)
Full reset EEPROM (SP-unlock!)
Also changes the IMEI on 447967-89-400044-0 2767 * 3855 #
User reset EEEPROM * 2767 * 2878 #
Display adjustment menu * # 0523 #
Samsung C100
* 9999 # - Firmware version
* 0007 # - Phone rebootM
* # 0228 # - information on battery charge and ambient temperature
Cheats for Nokia 6110
* # 06 # shows IMEI code
* # 0000 # shows the software version of the phone
* # 92702689 # entry to the special menu:
1: Shows the serial number
2: Shows month and year of production
3: Shows (if entered) information where the phone was purchased here you can also record the sale information of the phone (only once) 4: Shows the date last change in the program - if entered
6: Transmits all phones, pictures, sounds from one phone to another
Philips Genie 2000
* # 06 # Shows the serial number of the phone (IMEI)
* # 327 * # Enable / Disable 1800 MHz EFR
* # 337 * # Enable / Disable enhanced speech coding
* # 476 * # Enable / Disable 900 MHz
How to find out the firmware version
Nokia
To find out the firmware version on your phone, dial: * # 0000 # and you will get the answer:
1 Line - Version
2 Line - Release Date of Prog. security
3 Line - Phone type.
Siemens
To find out the firmware version on your phone, type:
* # 06 # IMEI - a unique phone number will appear on the screen.
Then press the navigation key under the word Info. The firmware version of the phone appears.
Samsung
To find out the firmware version on your phone, dial: * # 9999 # - display the software version
Ericsson
To find out the firmware version on your phone, type:\u003e *<<*<* версия ПО
>*<<*<*>\u003e\u003e IR version information. If you press YES you can check the driver version
Sony
To find out the firmware version on your phone, dial: * # RELEASE # (* # 7353273 #) - firmware version
# version # (# 8377466 #) - firmware version
LG
To find out the firmware version on your phone, dial: 2945 # *
In the menu that appears, select S / FW version
Alcatel
To find out the firmware version on your phone, dial: * # 06 # after the ‘V’ symbol the firmware version is displayed.
Panasonic
To find out the firmware version on your phone, dial: * # 369 # In the menu that appears, select S / FW version
2. When loading the phone, until I found a network
*#9999#
Nokia
Check the software version stitched into your phone.
Three lines should appear on the display, for example:
V05.31 - version p / o
24-05-00 - release date p / o
NSE-8/9 - data compression type
Information about the latest versions of mobile phone p / o can be found on the NOKIA website www.nokia.com
You can upgrade the software version from your local dealer (operator). All over the world this operation is performed free of charge. I don’t know about Russia.
Warranty and repair information phone. When buying a phone with your hands, you can find out when it was purchased and whether it was being repaired.
By typing this combination, you get a lot of information (sorry, it crashed)
1 - Serial number
2 - Month and year of production
3 - Date of purchase In this item there is a menu for setting the date of purchase. Attention! After editing, you will not be able to change this data.
4 - Date of last repair
5 - User data transfer menu
! Exit this menu can only turn off the phone.
Improve sound quality
Most new Nokia phones feature several analog signal digitization modes. Enhanced Full Rate (EFR) mode uses ACELP (Algebraic Code Excitation Linear Prediction) audio compression technology. This technology allows you to achieve higher sound quality compared to the Full Rate CODEC mode with constant bandwidth.
* 3370 # - enable EFR mode (power consumption increases)
# 3370 # - disable EFR mode
EFR mode changes after restarting the device.
“Half price” mode
I do not know whether it works in Russia, did not check. If you activate the “Floor price” mode, you reduce the sound quality and the incoming-outgoing traffic (the amount of information transmitted). This allows the operator to place more subscribers on the same network.
You can get a discount on service from the operator up to 30%.
In Europe, it is.
* 4720 # - Activation of the “Floor price” mode
# 4720 # - Disabling the “Floor price” mode
The “Half price” mode is changed after the unit is rebooted.
This feature is disabled in the latest phone models.
Unlocking the phone.
Quite often, providers “tie” mobile phones to their SIM cards. If the phone is “tied” to a particular operator, changing the provider by simply replacing the SIM card becomes impossible. The phone will refuse to work with another operator. You will have to remove the phone from the account of the previous operator and get registered to the new. Most likely, both for money. Albeit small, but still offensive.
In order to “untie” your phone yourself, you must know the “Master Code”. This is a ten-digit number unique to each phone. First, check whether your phone is tied to a specific operator or not. To do this, instead of the real “Master Code”, you can dial any ten-digit number, for example: 0123456789.
The command to determine the binding status of the cedlephone:
# pw + 0123456789 + 1 #
(the symbols “p”, “w” and “+” are on the “*” button)
In all models of Nokia phones, starting from 2110, 4 levels of SIM binding are set.
The unlock command in general form looks like this:
# pw + (Master Code) + # #
With the help of commands of this family you can check, remove or activate the binding of the phone to the operator.
‘No.’ is the number 1,2,3 or 4 - determines the level of blocking with which you want to work.
# pw + 0123456789 + 1 # - binding to the operator
# pw + 0123456789 + 2 # - binding to the network
# pw + 0123456789 + 3 # - binding to the network and the operator
# pw + 01234567890 + 4 # - binding to a specific Sim card
Instead of dialing the numbers 0123456789, you must use the Master Code, which the seller of the phone must tell you.
To remove the binding to the operator you will need to nbrat
# pw + (Master Code) + 1 #
Unlocking the phone - 2
If you have a Nokia phone of model range 16xx, 21xx, 31xx, 51xx or 81xx, you can remove the SIM binding to the operator when you turn on the phone.
For this:
Insert SIM card new operator
Press and hold UP VOLUME for 3 seconds
Release the button. Will the PIN CODE prompt appear?
Press the "C" button.
Press the “*” button, hold down until it flashes.
Repeat point 5
Enter 04 *<Ваш PIN CODE>
*<Ваш PIN CODE>
*<Ваш PIN CODE>
#
The message: PIN CODE CHANGED (or ACCEPTED) appears.
The binding to the previous operator will be removed and the card of the new operator will be activated. The binding will be removed only for the current session, i.e. If you turn off the phone and then turn it on, you will have to repeat the whole procedure from the first to the tenth points.
Attention: Starting from version 5.04 p / o, Nokia removed this feature. You either have to lay out money for a change of operator, or use the previous advice.
Siemens
* # 06 # - Phone Identifier (IMEI)
* # 06 # and the left softkey - firmware version and supported protocols
* # 0000 # and green key - automatic language selection
* # 0001 # and green key - English
* # 9999 # - Factory settings (does not change the installation on the SIM card)
* # 0606 # and press the top left button - will show the presence of locks (works only without a sim card)
* # 0003 * (secret code 8 digits) # - removal zalochki
SAMSUNG
* # 0228 # - You can find out the battery temperature, type and charge. Now you will know for sure how long the battery will last, Min. charge = 3500 mV, max. charge = 4200 mV (for samsung c-100).
* # 0LCD # - Display brightness setup (display brightness).
* # 8888 # - HARDWARE Version (hardware version).
* # 9999 # - FIRMWARE Version (software version, i.e. firmware).
* # 9998 * JAVA # - JAVA - CSD and GPRS settings for the Internet (in particular, for downloading JAVA applications).
* # 9998 * VERNAME # - extended information about firmware, hardware, time and date of creation of software, etc.
* # 06 # - output IMEI-code (International Mobile Equipment Identity)
* # 0837 # - output software version (instructions)
* # 9998 * 228 # * # 9998 * 228 * 0 # (for SGH -Rxxx, -Nxxx) - battery status (capacity, voltage, temperature)
* # 9998 * 862 # * # 9998 * 862 * 0 # (for SGH -Rxxx, -Nxxx) - Set the voice coder mode (normal, headphone or speakerphone)
* 0001 * s * f * t # - Change serial parameters
Samsung SGH-600
* # 06 # - Shows IMEI.
* # 9999 # - Displays software version.
* # 0837 # - Displays software version. (instructions)
* # 0001 # - Shows Serial parameters.
* # 9125 # - Activates the smiley when charging.
* # 9998 * 228 # - Battery status (capacity, voltage, temperature)
* # 9998 * 246 # - Program status.
* # 9998 * 289 # - Change the frequency of the call.
* # 9998 * 324 # - Debugger screen.
* # 9998 * 364 # - Watchdog.
* # 9998 * 377 # - EEPROM Error Stack - Use the side keys to select values. Cancel and ok.
* # 9998 * 427 # - Trace Watchdog.
* # 9998 * 523 # - Changing the contrast of the display - only for version G60RL01W.
* # 9998 * 544 # - Jig detect.
* # 9998 * 636 # - Memory status.
* # 9998 * 746 # - The size of the SIM file.
* # 9998 * 778 # - SIM Service Table.
* # 9998 * 785 # - RTK (Run Time Kernel) errors - if ok then phn is reset.
*#9998*786#*#9998*837#
- Software version.
* # 9998 * 842 # - Vibrator Test - The screen backlight flashes for 10 seconds and the vibrator turns on.
* # 9998 * 862 # - Vocoder Reg - Normal, Earphone or carkit can be selected.
* # 9998 * 872 # - Diag.
* # 9998 * 947 # - Reset On Fatal Error.
* # 9998 * 999 # - Last / Chk.
* # 9998 * 9266 # - Yann debug screen. (= Debug Screens?)
* # 9998 * 9999 # - Software version.
* 0001 * s * f * t # - Changes serial parameters (s =?, F = 0.1, t = 0.1) (incomplete).
Display a message in the form of a running line, you can put at the very beginning of the SMS # flash #. This supports the SMS center with the number + 70957699800. For such sending, you need to use it.
MMS via SMS
By sending a “% Flowers.” Message to a Siemens phone from another number, the subscriber will receive an image!
Unlock PIN
** 05 * PUK * new PIN * new PIN #
PIN2
** 052 * PUK2 * new PIN2 * new PIN2 * new PIN2 #
Zavison for "friends" on Siemens
% English
Panasonik
746 ok ok - secret menu
Here's another for Samsung dug
* # 0228 # - You can find out the battery temperature, type and charge. Now you will know for sure how long the battery will last, Min. charge = 3500 mV, max. charge = 4200 mV (for samsung c-100).
* # 0LCD # - Display brightness setup (display brightness).
* # 8888 # - HARDWARE Version (hardware version).
* # 9999 # - FIRMWARE Version (software version, i.e. firmware).
* # 9998 * JAVA # - JAVA - CSD and GPRS settings for the Internet (in particular, for downloading JAVA applications).
* # 9998 * VERNAME # - extended information about firmware, hardware, time and date of creation of software, etc.
* # 06 # - output IMEI-code (International Mobile Equipment Identity)
* # 0837 # - output software version (instructions)
* # 9998 * 228 # * # 9998 * 228 * 0 # (for SGH -Rxxx, -Nxxx) - battery status (capacity, voltage, temperature)
* # 9998 * 862 # * # 9998 * 862 * 0 # (for SGH -Rxxx, -Nxxx) - Set the voice coder mode (normal, headphone or speakerphone)
* 0001 * s * f * t # - Change serial parameters
Samsung SGH-600
* # 06 # -\u003e Shows IMEI.
* # 9999 # - Displays software version.
* # 0837 # - Displays software version. (instructions)
* # 0001 # - Shows Serial parameters.
* # 9125 # - Activates the smiley when charging.
* # 9998 * 228 # - Battery status (capacity, voltage, temperature)
* # 9998 * 246 # - Program status.
* # 9998 * 289 # - Change the frequency of the call.
* # 9998 * 324 # - Debugger screen.
* # 9998 * 364 # - Watchdog.
* # 9998 * 377 # - EEPROM Error Stack - Use the side keys to select values. Cancel and ok.
* # 9998 * 427 # - Trace Watchdog.
* # 9998 * 523 # - Changing the contrast of the display - only for version G60RL01W.
* # 9998 * 544 # - Jig detect.
* # 9998 * 636 # - Memory status.
* # 9998 * 746 # - The size of the SIM file.
* # 9998 * 778 # - SIM Service Table.
* # 9998 * 785 # - RTK (Run Time Kernel) errors - if ok then phn is reset.
* # 9998 * 786 # - Run, Last UP, Last DOWN.
* # 9998 * 837 # - Software version.
* # 9998 * 842 # - Vibrator Test - The screen backlight flashes for 10 seconds and the vibrator turns on.
* # 9998 * 862 # - Vocoder Reg - Normal, Earphone or carkit can be selected.
* # 9998 * 872 # - Diag.
* # 9998 * 947 # - Reset On Fatal Error.
* # 9998 * 999 # - Last / Chk.
* # 9998 * 9266 # - Yann debug screen. (= Debug Screens?)
* # 9998 * 9999 # - Software version.
* 0001 * s * f * t # - Changes serial parameters (s =?, F = 0.1, t = 0.1) (incomplete).
Secret codes for Sony Ericsson phones
Valid on all models:
IMEI Check - * # 06 #
Entrance to the service menu -\u003e *<<*<*
English - * # 0000 #
Engineering menu - * # 3262255 * 8378 #
Software version - # 8377466 #
Secret codes for Ericsson phones
View Phone ID (IMEI) - * # 06 #
Access to the Service menu -\u003e *<<*<* — Просмотр версии и даты выпуска прошивки телефона, а также здесь можно просмотреть текст всех пунктов меню и сообщений зашитых в память вашего телефона
Access to the lock control menu, SP-Lock menu -<**< — Если телефон не заблокирован, то после набора кода ничего не произойдет. «<» — джойстик влево.
Installing English in the menu - CLR<0000> - A very necessary code in the case when, on the display of the phone, some characters
Description of the testimony of a monitor in Ericsson phones
Enable NetMonitor’a
(If for your model the described method does not work, then NetMonitor can only be enabled using the interface cord)
1. Remove the SIM card.
2. Turn on the phone.
3. Type: ** 04 * 0000 * 0000 * 0000 #
4. On the words "Wrong PIN" quickly press NO, you get to the menu.
5. Use the “right” arrow to get to the “Settings”
6. In the “Settings” menu, find the “Channels” item, set it to “On”
7. Exit the menu, call the only possible number 112 and observe netmonitop.
The indicator displays 6 groups of numbers.
|—1—|—2—|—3—|
|—4—|—5—|—6—|
1. The channel number on which the phone operates can be from 1 to 124. The letter in front of the number indicates the status of the phone: B - in standby mode, S - when called, T - in the process of conversation.
2. This shows the reception level (Rx Level). Its value can be from 0 to 63.
0 corresponds to -110dBm
63 corresponds to -50dBm.
3. This shows the output power of the phone’s transmitter in dBm (during a call and a conversation).
39 dBm —— 8 W
37 dBm —— 5 W
35 dBm —— 3.16 W
33 dBm —— 2 W (maximum for GSM900 hand-held terminals)
31 dBm —— 1.26 W
29 dBm —— 794 mW
27 dBm —— 501 mW
25 dBm —— 316 mW
23 dBm —— 199 mW
21 dBm —— 125 mW
19 dBm —— 79 mW
17 dBm —— 50 mW
15 dBm —— 32 mW
13 dBm —— 20 mW
4. Here the time slot number from 0 to 7 is displayed. You can see it during the call.
5. Here during the conversation you can observe the number of errors (Bit Error Rate). This parameter ranges from 0 to 7.
0 - there are practically no errors, more than 5 possible disconnection, aurally characterized by a large number of interruptions.
RXQUAL table
0 —— BER< 0,2 (%)
1——0,2 < BER < 0,4
2——0,4 < BER < 0,8
3——0,8 < BER < 1,6
4——1,6 < BER < 3,2
5——3,2 < BER < 6,4
6——6,4 < BER < 12,8 (здесь мы имеем потерю половины данных из пакета)
7——12,8 < BER
http://forum.antichat.ru/threadnav26187-2-10.html
FUNNY ANECDOTES 18+ FROM THE SITE ANECDOT RUIs he:
- A real man should not sleep at home once a week!
She is:
- Yeah, so that another real man was where to spend the night ...