Merezheve ZTE ownership: setting up routers for Rostelecom. How to configure the ZTE ZXHN H118N Rostelecom router Installation of the zte corporation router

To set up any of the routers from the ZTE line, it is recommended that you first prepare authorization data for the Internet connection to Rostelecom, since the network will not be able to be activated without them. Most often the provider chooses PPPoE connection type to services. These parameters are used to establish a connection with ADSL and Ethernet technology. There are also fewer options for purchasing services that may arise when running a fiber-optic cable directly into the client’s apartment or private booth.

Adjustment of Rostelecom parameters for ZTE brand routers

ZTE is one of the largest companies in the light electronics market. In addition to the great popularity of smartphones from the manufacturer, which is being overshadowed by the remaining hours, which may be of lower quality than similar products of the brands LG and Samsung, but in which the characteristics and features are not compromised by them, the borrowing company and an increase in position in the sphere of edge ownership.

ZTE provides its customers with a wide range of devices for creating home and corporate premises. For homeowners who need the Internet outside of the area where it is not possible to create a wired connection, the device uses ZTE MF 190 modems, which work just like the original (factory firmware), so with the modification introduced by Rostelecom.

These can be connected directly to a computer or through additional routers that support cable sockets and technology.

Respect! The ability to reflash ZTE MF 190 modems from Rostelecom and other operators using official methods is available daily. For such problems, start vikorizing the Dc-Unlocker program.

Also, the ZTE network has routers, for example, the H108N, which are used by customers as Rostelecom’s Ethernet modem for setting up high-speed home and work networks.

Preparation before adjustment

Before setting up ZTE routers with Rostelecom, for example the E5501 model, you need to check the equipment included:

  • life block (12V converter);
  • Minimum one Ethernet cable.

The carefully unpacked box containing the device will also contain a disc with software, a warranty and no literature, but for setting up the ZTE modem under Rostelecom, the components do not play an important role.

Respect! However, if you only want to access the Internet via Wi-Fi, an Ethernet cable is always an indispensable component required for basic setup.

To connect, the first device you need to be familiar with is the port on the rear panel.

Having turned on the ZTE E5501 side with functional connectors, like on the ZXV10 W300, here you can find:

  • chotiri porti LAN;
  • Ethernet port;
  • Rose for cable life.

The ZTE H108N model will serve as one of the most common modems, as well as a connector for an ADSL cable (telephone cable), as well as a router for connecting the Internet via a telephone line. The exact sequence of connecting the boundary equipment is not entirely clear. We first connect the power supply unit to the socket and port on the router, and then insert the Internet cable into the WAN or ADSL port (depending on the model of the modem, one of these ports will be present). Now we have an RJ45 connector on the computer (standard edged input) and connect it with an additional Ethernet cable to the external port on the router. So, as in our case, we have a rose, you can connect the cord in any way.

Respect! If you are installing ZTE H108N, then, in addition to the described sequence, it is also recommended to connect a splitter, filtering Internet and boundary signals. This allows you to simultaneously vikorize two provider services.

Once all the cords are connected, you can turn on the power supply and use the button on the rear panel.

Now let's move on to the front part of the building. It contains indicators that will help you identify the options when setting up modems ZTE ZXV10 W300, H108N or E5501 for Rostelecom. For example, data about the following is displayed here:

  • to which outlet is the computer connected;
  • How do I use Wi-Fi;
  • What is the connection to the Internet provider.

Setting up an Internet connection on ZTE ZXV10 W300, ZTE H108N, ZTE E5501

Once part of the connection is completed, you can move on to setting up modems for Rostelecom, which we build on the ZTE ZXV10 W300 application. We go from a computer connected directly to the modem, to the browser and write it in the address bar of the IP router. You can find it from your passport. Our VIP will be 192.168.1.1. Now enter the standard login and password, as also specified in the instructions for the modem (admin/admin).

After this, you will be redirected to the Internet Security panel. In the Network tab, select the WAN parameters and configure the PPPoE connection using the data seen by the provider. They can be found in the contract or on a special Rostelecom card.

Since it supports Wi-Fi settings and such a modem is intended to connect drone-free devices to the limit, you can configure the module’s operation on the Wireless tab. Here you select the network name (SSID), and also create a security key that will allow you to avoid connecting third-party clients to the drone-free network.

In ZTE, it occurs in a number of stages (transferably or stationarily). When installing routers for private apartments or small offices, you must first select a suitable location, then select the connection, and then enter the connection parameters.

The 4G/WiFi router ZTE MF90 is extraordinary for 2015-2016 (the modem itself is the first to appear on the “mass” market), but at the same time there is a clear increase in devices that satisfy the basic capabilities of functionality and mobile sti router.

It’s important to immediately note that the device is “locked” to work with the Beeline operator, and sales are carried out mainly through the sales offices of this provider.

ZTE mf90 router specifications: overview and specifications

For an adequate price (close to three thousand rubles), Chinese retailers have produced a clear mobile router with competitive characteristics.

1. Transmission speed:

  • - with LTE FDD up to 100 Mbit/s – when receiving, and up to 50 Mbit/s – when transmitting;
  • - with “DC-HSPA+” up to 42 Mbit/s – reception and up to 5.76 Mbit/s – transmission;
  • - with "EDGE/GPRS" up to 236 Kbit/s.

2. Support for micro SD memory cards up to 32 GB.

3. Lithium-ion battery 2300 mAg.

These characteristics completely ensure comfortable surfing at the edge: the battery allows you to use all the benefits of the Internet for 6-8 years.

Router zte mf90: indicators and indicators

Due to its mobility, the router had to sacrifice an indicator part.

There are three indicators on the front part of the device:

  • - "Battery charge". Before the hour of fire or the blinking of the red indicator, you need to charge the battery. If the light “blinks” green, the battery is charging (the charge level is not lower than average or the battery is fully charged).
  • - “Reveal to the signal of the fence.” The indicator is constantly "burning" in red - a daily signal, or "USIM" is not installed. "Light up" in green - registration in the 2G/3G limit, "blink" in green - the router is connected to the limit and data transmission is in progress, while the indicator "lights" in blue - this means that the device is connected to the 4G limit.
  • - "Merezha WiFi". If the indicator is “blinking” in blue, the no-shot line is down, if it’s “on,” then “WPS” is down.

Below the indicator panel there are located the “Power” and “WPS” buttons, which are also used to tighten or close the dartless line (with a one-time press), or simply hold the button down for 5 seconds. Select “WPS” mode.

On the side there are two connectors for connecting 2 additional antennas and a “mini-USB” connector - for synchronizing with a computer or connecting to a charging device.

In the middle of the case, under the battery, there are two slots: one for USIM, the other for microSD. And on the opposite side of the router, near the side buttons, there is a “Reset” button (this is reset to factory settings).

How to connect the zte mf90 modem?

The procedure for connecting the zte mf90 router is as follows:

Open the cover and insert it into the main USIM slot of the Beeline operator.

  • - Place it on the sticker in the middle of the body, where the “SSID” of the droneless device is indicated (indicated in the MF90_XXXXXX format, which is a unique number that is assigned to the skin device) and password. Remember them - these data will become useful to you in the future.
  • - Insert the battery and close the cover.
  • - Use the “Power” button to turn off the device (the corresponding indicators light up) and connect the router and computer with a “USB cable”.

  • - Search for available drone-free networks (based on the searched “SSID”) and connect before entering the password.
  • - Next, in the address bar of the browser, enter 129.168.0.1 or m.home (for reference - “admin”).

To change the password for logging into the configuration of the zte mf90 router, go to the “Keruvannya” section. Here you can also set up the energy saving mode, pin - USIM code and set up SMS notification.

How to set up an Internet connection on the zte mf90 router?

Internet access can be configured through the router interface.

We first need to carry out “Activation of the starting balance”:

Open the section “Keruvannya by servants”;

From the menu that appears, select “Activation of starting balance”;

Click the “Activate” button.

If payment will be made for additional Beeline payment cards in the “Service Payment” section, select “Payment Card Activation” and enter the digital code of the card (not any spaces or hyphens).

You can also quickly use the service “Ask money from another subscriber”: in the same section, select “Ask money from another subscriber”, enter the phone number without a symbol and press “Send”. Forfeit the check and pay. It’s not a good idea to use this service, as long as a limit has been established - you can send a request no more than 5 times per order.

To complete the setup, you just need to click on the “Connect” button and select one of the connection modes:

  • - If you select “Automatic”, then when the device is turned on, the Internet connection will be carried out independently;
  • - If you set it to “Manual”, then to deny access to the Internet when the device is turned on, you will need to open the web interface.

How to set up wifi on zte mf90 router?

To set up the drone-free network, go to the “WiFi” section and do the following:

  • - enter the name of the fence in the "Name of fence (SSID)" row;
  • - check the "Disable" box next to the "Transfer network name (SSID)" row;
  • - "Encryption type" fill in "WPA-PSK" - "WPA2-PSK";
  • - in the “Password” row, enter the security key for connecting to the limit that is being created;
  • - in the “Maximum connect” row, set the maximum number of devices to be used to determine the maximum number of devices (not more than 10).

The “Firewall” section has settings for filtering and port forwarding, as well as the “UpnP/DMZ” connection.

The “Router” section allows you to change the “IP address” of the router, get to know its “Mac address” and configure the “DHCP server”.

In the “WiFi Internet” section you can set up and use “mf90” as a repeater.

Thus, the 4G/WiFi router ZTE “MF90” is a wonderful mobile option for a remarkably low price, which opens up great possibilities for web surfing in transport, on the job, or in any other places where the Internet is not allowed List of standard routers.

Beeline router unlock zte mf90

Unlocking the ZTE MF90 router, and, in principle, all other routers connected to one provider, is not difficult, but requires respect (and basic understanding of what is on the computer).

1. To get started, download and unpack the firmware that allows you to unlock the zte mf90. It’s not difficult to know: if you ask something like “How to unlock the MF90 router,” there are a lot of options where you can acquire entire archives.

4. Now you need to put the router into diagnostic mode. Follow the address "http://m.home/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY".
Please note that the diagnostic mode is only an hourly parameter, so you don’t have to go straight to the deadline.

5. The "Device Manager" will have a new ownership of the "ZTE Mobile Broadband DiagnosticsPort" - open the "Ports" section and remember which port is assigned to COM4 or COM13.

6. Place a separate file “.bin” from the archived archive at the root of the “C:” drive.

8. Unlock and restart the router.

Finally, you can check any manual utility from checking the binding, unlocking your router or whatever.

A router is a device that allows you to instantly access the Internet without any devices (computers, tablets, smartphones, and much more). Today's assortment of routers allows you to choose the ones that best suit your specific needs.

A look at routers

There are a number of models that are optimal for a suitable home:

  • Zte E5501;
  • Zte H118N;
  • Zte E5502;
  • Zte ZXA10 f660.

ZTE E5501

This device supports a variety of interfaces:

  • 4 ports for RJ-45 connector (which allows you to process data through the edge interface, the cable type is assigned automatically);
  • follows the standard 802.11n connection (frequency 2.4 GHz);
  • There are two small antennas to ensure stable Wi-Fi operation.

In addition to the supported interfaces, this device has no other options, making setting up your choice manual and easy.

Zte H118N

A router whose design has:

  • USBv.2 for a quantity of 1 piece for connecting to a 3G modem (presence is optional);
  • 4 ports for connecting to a cable lined with an RJ-45 connector;
  • Wi-Fi (IEEE 802.11n).

The maximum data transmission speed of the device is 300 Mbit/s. A number of data encryption technologies are also supported – WEP, WPA, WPA2.

ZTE 5502

The examined router from such a renowned company does not compromise anything on its classmates:

  • 4 ports for connecting to a cable via an RG-45 connector;
  • supported: IEEE 802.11n (maximum transmission speed – 300 Mbit/s);
  • є two antennas for operation in the 2.4 GHz range;

The encryption capabilities of this device are the widest:

  • WEP encryption technology 64/128 bit;
  • WPA-PSK;
  • WPA2-Interprise and many others.

ZteZXA 10 F660

The ZTE router has not only excellent performance characteristics, but also a remarkably low price.

It is simple to set up and also supports all the necessary technologies:

  • є 4 roses for RG-45;
  • 2 sockets for operation with POTS interface (RG-11);
  • works successfully with Wi-Fi technology;
  • There is a socket for connecting USB devices.

Select device

When choosing a router for your home, you need to take into account the following important points:

  • simplicity of adjustment - so that if there are any problems, they can be resolved without being called out by the fakers;
  • price - price is especially relevant for families with many children;
  • reliability;
  • Features of the Wi-Fi module

The simpler the structure I build, the easier it is to set it up. This will give an advantage to these routers, as they will not require dancing with tambourines when they are connected to work. Let us spare a great deal of time.

Video: How to open a port on the ZTE ZXA10 F660 router

The price range is a very important moment. Today there is no sense in buying expensive devices. So, the young ones in the linear model carry on board everything that is needed for comfortable work with Wi-Fi at home. It’s not a good idea to overpay for a brand name model - expect such expenses to be unpaid.

Choose the best option for the price, do not buy completely cheap models. So, often at an extremely low price there is no risk of production, which can cause damage.

The Wi-Fi module is due primarily to the antenna and the rotating body. So, like antennas of this type, they can distort a large area. What is more important, since the apartment or booths have a large footage. Also, the antenna must be removed and replaced if necessary - otherwise it may be necessary to expand the coverage area.

The optimal choice for all tires is the ZTE ZXA10 F660 router. There is a clear advantage, and also at a low price (without paying attention to the bad parameters).

Connection to PC

The simplest part of setting up a ZTE router is connecting to a PC. This operation is described in this order:


Keruvannya nalashtuvannyami

How to set up a ZTE Wi-Fi router? Management of settings is available through an additional WEB interface, which can be accessed through any installation on a PC browser. For example, internet explore. In the following address row, enter the following combination of numbers and symbols – http://192.168.1.1. If the router is connected to the computer according to the instructions, a window will appear in which you can enter your login and password.

Behind the password and login there is the word admin (in Latin letters only). Once the fields are filled in, click the “Login” button. It's time to show up in green and white colors.

The top part has the following tabs:

  • status;
  • network;
  • security;
  • application;
  • administration.

The skin tab allows you to treat this or other sections.

To set up Wi-Fi, follow these steps:


These transfers enhance Wi-Fi.

With respect, it is necessary to add a section called Multi-SSID.

Behind the tanks, this section allows you to create a barrier both open and closed for various devices:

  • SSIDName – this item allows you to name the network that is being configured;
  • MaximumClients – the maximum possible number of devices connected simultaneously (this model supports 32 units);
  • EnableSSID – enabling or disabling the network that is being changed;
  • HideSSID – detection of a dartless line;
  • ChooseSSID – select the Wi-Fi network to change.

There is also a Security section, where you can adjust the following items:


When choosing a password, you should follow these recommendations:

  • the appearance of small and great letters (in a random order);
  • The password must be at least 10 characters long;
  • The clarity of the numbers is also crazy.

Setting up a ZTE router for providers

The ZTE ZXA10 F660 router is configured differently, depending on which provider provides Internet services (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up the robot with this operator will require special respect, so all the nuances must be taken care of:


In the “Multi-SSIDSettings” and “Security” sections, all settings are installed according to the instructions supplied to the device.

With special respect, please add the following to the "AccessControlList" section. The "Mode" item may have the value "Block" set. "MACAddress" - 00:13:e0:81:97:ee.

Rostelecom

Setting up a router for work with the Rostelecom provider is not difficult.

It is necessary to cancel the following actions:


If you are a Wikonian, follow the “Multi-SSIDSettings” section:

  • In the "ChooseSSID" item you can set the SSID value;
  • check the box opposite “EnableSSID”;
  • "SSIDName" allows you to select the name of the measure.

After completing all settings, you must click the Submit button.

MGTS

To correctly configure the router model with the MGTS provider, you must enter the following steps in strict order:

Allow to activate Wi-Fi. Other settings are connected to the user that reaches the router.

It is also imperative to set up a section called Multi-SSID. This section allows you to set a special identifier for the network, as well as to capture the data. All infusions are prepared individually, depending on the particular needs of the brewer.

The “Securiry” section allows you to configure the encryption parameters and password for connecting to the network.

The ZTEZxa10 F660 router is the optimal device for the competitive price-capacity plan. Special choice for home and office. This device is easy to install, compact, reliable.

>

The ZTE ZXA10 F660 router is an instant accessory that is required to connect to a global information network via a fiber optic line (GPON technology). Its functionality includes an ONT terminal and a Wi-Fi router that distributes the Internet either via an Ethernet cable or through a wireless connection with an end device.

In addition to the standard capabilities of the zxa10 f660 router, it provides the function of IP telephony and the ability to create a local Web server based on the router.

And in this article, step-by-step instructions for setting up the zte zxa10 f660 router with MGTS are presented, as well as details of how to connect this device.

Router zte zxa10 f660: technical characteristics and design features

The gpon ont zxhn f660 router features economical mobile Wi-Fi transmission with a main operating frequency of 2.4 GHz.

The router's functionality ensures speedy Wi-Fi data transmission of up to 300 Mbps, with which the device supports up to 4 SSIDs with simultaneous connections of 128 users up to the skin limit.

Also, the zte f660 router supports WPS mode, so devices can be used to expand the WiFi zone of another router.

On the back side of the router there are:

  • - standard LAN connectors for connecting up to zxa10 f660 devices via an additional Ethernet cable;
  • - two POTS connectors for implementing the IP telephony function (for connecting an RJ-11 telephone cable);
  • - two USB connectors for connecting external devices (including for updating the device firmware and organizing a local Web server);
  • - POWER socket for connecting a power adapter;
  • - buttons to turn on/off the WLAN and WPS functions;
  • - RESET button to reset the router to factory settings;
  • - button to turn off/shut down the router.

The GPON connector for connecting the fiber optic cable provided by the provider can be installed on both the front and back panels of the zte f660 router.

Connecting to the zte f660 modem

1. Connect the living unit (supplied with the device) to a 220V electrical outlet, and its plug is assigned to a new socket on the rear panel.

2. Connect the optical cable with the green plug to the assignments for the new port, and the other end to the socket.

3. Insert the plug of the patch cord (Ethernet cable) into one of the four LAN sockets, and the other end into the socket of the computer's interface card, which will be the input for setting up the MGTS gpon zte zxa10 f660 router .

When you connect the router to the PC, the indicator on the front panel of the device will light up, indicating an active LAN connector. If something happened, it is recommended on what computer.

How to install the zxa10 f660 router?

Connection, testing and adjustment of the optical connection, as a rule, is carried out by the specialists of the supplying company.

If you install the zte f660 optical modem yourself, then call your provider’s customer service, ask for installation and follow the instructions of a specialist.

Router zte zxa10 f660: WiFi setup

1. Launch any Internet browser on your computer and enter http://192.168.1.1 in the address bar.

In the field that appears, enter login: admin, password: admin and go to the interface for setting up your device.

2. The window will display a menu with tabs: “Status”, “Network”, “Security”, “Application”, “Administration”.

3. Go to the “network” tab, the “WLAN” submenu and the “Basic” subsection.

In the Wireless RF Mode column, select the Enabled option.

  • - Next, “Mode” must be set to “Mixed802.11b+g+n” mode.
  • - "Country/Region" - "Russia".
  • - "Chanel" - "Auto".
  • - "Transmitting power" - "100%".

4. Click the Submit button, then go to the Multi-SSID Settings subsection.

In the "Choose SSID" column, select "SSID1".

  • - Place a check mark next to the “Enable SSID” field.
  • - Come up with a name for your network and enter it in the “SSID Name” field.

5. Click the Submit button again and go to the Security section.


- Here at “Choose SSID” select the first option.

  • - In “Authentication type” set WPA2-PSK.
  • - Create a password for the Wi-Fi network and enter it in the WPA Passphrase field.

The password must be unique and contain at least 8 Latin characters. It is not recommended to set standard and easy to find passwords (for example, alarm addresses) in order to prevent unauthorized connections to your WiFi network.

How to change the password for the MGTS zte f660 router?

To set a unique administrator password, which is used for logging into the MGTS gpon zte zxa10 f660 router, go to the “Administration” menu and the “User Management” submenu.

- Switch "User Right" from "Administrator".

Enter the old password in the “Old Password” field and the new password in the “New Password” and “Confirm Password” fields.

It is also recommended to turn on the WPS function before starting to use the zte f660 router. To do this, press the secondary button on the back side of the device.

Application © 2023 Mobile and computer gadgets