Choice of a box for tools. The best tool boxes - an overview of modern types and the best storage devices for hand and power tools. by the way of accessing the tool there are

If you are professionally engaged in repair work that involves the use of electrical appliances and other construction tools, then this box is just created for you. Its main advantage is its impressive spaciousness. The FATMAX professional box has a size of 23 inches, which allows you to store a large number of different tools in it, for example, a drill, hammer drill, grinder, hand saw and more.

Inside the box there is a removable tray for carrying tools and small parts. Moreover, if you do not take it out, there will be enough space in the main compartment to store a large tool, since the length of the tray is less than the length of the box itself. The FATMAX body is made of structured and has special ribs that provide high strength and rigidity. It should be said that there is a special seal around the perimeter of the box, which provides reliable protection of the inventory located inside from rain and moisture.

The lid of the drawer is fixed with large latches made of metal and protected from corrosion. There is a possibility of using a padlock (sold separately) if necessary. It is also necessary to highlight a small protrusion on the lid that forms a V-shaped recess. This feature makes it possible to conveniently place the board when cutting.

Idea Hephaestus 18

PLACE IT ALL ON SHELVES

The main goal of any toolbox is to conveniently organize your inventory for quick access to it. If we talk about the model Idea "Hephaestus", then this is perhaps one of the best solutions for ensuring comfortable storage of not only a small power tool for household use, such asan electric drill, a grinder, a screwdriver, but also related parts: drills, circles, etc. The box belongs to the middle models, its size is 18 inches.

A big plus of this box fortools is the presence of several organizers located on the lid. There are two removable compartments for small loose parts, as well as a small compartment for storing bits. Removable trays are closed with a plastic latch, and the bit compartment is closed with a special lock. The lid of the drawer is closed by two metal, corrosion-resistant latches that securely hold it, preventing accidental opening.

Unlike many other drawers, there are two additional organizers on the front, which can be pulled out with a handle. Ideal for storing small items that need quick access. Separately, it should be noted the presence of a removable tray with a handle, divided into several sections for convenient storage of a hammer, screwdriver or a small level.

Blocker Expert

INEXPENSIVE AND VERY SPACIOUS BOX

Those looking for a large capacity toolbox should definitely consider Blocker Expert. The size of the box of 22 inches indicates the possibility of storing and transporting fairly large tools, including professional sets. This model is made of polypropylene and steel, which indicates the high strength and reliability of the case, which can withstand increased loads.

The drawer has one large compartment and a removable tray with a handle, which is divided into several sections. This tray is ideal for storing screwdrivers, hammers, pliers and other small tools. We should also mention two organizers built into the lid of the drawer, each of which is divided into two parts and closed with a transparent lid. These sections are useful for storing a variety of loose small items, for example, screws, nails, screws, dowels, etc.

For easy carrying, an ergonomic handle is provided, which, if necessary, is hidden in the recess. The lid of the box is closed with metal locks, which are very practical and easy to open. The box measures 56 x 28 x 23.5 cm and weighs only 1.85 kg. We can safely say that this is perhaps the best toolbox in terms of balance between low price and large capacity.

FIT 65591

ONE OF THE STRONGEST

When choosing a toolbox, first of all, many users are guided by the size. In some cases, such an irreplaceable thing is purchased for storing various tools in the car, where it is very important to maintain a balance between spaciousness and dimensions. The FIT car toolbox is small in height and width, making it perfect for this purpose.

In terms of roominess, the drawer measures 16 inches, which is enough to store a screwdriver, electric screwdriver, and other small tools. It must be understood that due to the nature of the case, you will not be able to place a wide power tool in the box.

The box measures 40 x 20 x 19 cm and weighs about 2.5 kg. This mass is due to the predominance of metal in the body. This tool box boasts high strength and reliability due to the fact that the back, front and bottom are made of solid sheet steel. In turn, the lid and side walls are made of impact-resistant plastic.

Of the advantages, it is worth noting a convenient carrying handle, metal chrome locks that tightly close the drawer, as well as two organizer compartments built into the lid and a removable tray with a handle. If necessary, the cover can be closed with a padlock (sold separately).

Blocker master

FOR THOSE WHO PREFER COMPACT

Blocker's Master Tool Organizer is the perfect solution for those who want to keep all their tools in one place without taking up a lot of space. The box measures 40.5 x 21.5 x 23 cm and weighs 1.12 kg, making it one of the most mobile in its class.

In terms of spaciousness, the 16 '' box allows for storing and transporting small power tools. Boxes of this size are usually one of the most popular among users, as they are quite compact, but at the same time they have enough volume to hold the tool for almost any job. This box is made of plastic and is closed with wide latches that secure the lid tightly. The drawer has one large compartment and a removable tray with a handle, divided into several compartments for storing small tools.

Note that there are three transparent compartments on the lid. Side boxes are divided into several parts for easy storage of small hardware. Moreover, they are removable, which makes it possible to take them with you without carrying the entire box. In the center there is a small compartment with holes in which you can conveniently store dowels and other small things.

To transport the box, there is a large and wide handle that fits into a special recess. On top of that, a padlock can be used here to secure the tool during transport.

Perhaps, even in the apartment of the most inveterate "white-handed" there is a couple of screwdrivers, a hammer, a handful of nails and a few screws. And the arsenal of a real master includes a truly countless number of items - from a power tool battery to a scattering of bits, screws, screws and other fasteners. So that all this wealth does not act on the nerves of the household (and does not "dissolve" with their help in the far back streets), it is advisable to have special racks, shelves, cabinets and similar furniture.

For those who often work outside the home, an easy-to-transport case is useful. box or even a cart. All kinds of bags, belts, closable containers for small things will help directly in the process of work ...

There are two ways to acquire such accessories - by engaging in traditional "amateur performance" or simply by looking into a store, since the modern industry offers a rich selection of finished products. We will ignore the first option, but we will try to tell you about what is on sale.

CLASSIFICATION

As a first approximation, it is worth "isolating" stationary items - cabinets, racks, shelves, in other words, "real estate" of a workshop or garage. Among them are cabinets, tables and workbenches on wheels - although they are mobile, you cannot go far with them.

Then there are various boxes, boxes, cases - in general, what you can take with you, going "on a mission". Depending on the size and "stuffing" hand tools, hardware, drills, bits, drills and similar small things are placed there, there will be a place for a drill, a punch ... Immediately we will make a reservation: we will practically not dwell on "relatives" that are not intended for " independent ”life cases in which tools are sold. We will also omit the cases for ready-made screwdriver sets, etc.

To transport volumetric devices (for example, welding) or just a pile of tools, spacious "carts" will do. For those who, on the contrary, constantly deal with a lot of small items, there are special "case-shaped" organizers, consisting of a dozen or so compact compartments.

And finally, bags, pouches, belts and other means of "individual wear". They make the job much easier - everything you need is at hand, there is no need for "handlers" or regular jogging for the right screwdriver. At the same time, the pockets of clothing remain intact, which is also a plus.

WHO IS WHAT TOWN

Many are engaged in the production of such containers. A significant role is played by companies whose “strong point” is the production of plastic products. Thus, the main activity profile of the Italian plant Di Martino (trade mark GDM) is garden sprayers; Israeli Keter is a significant figure in the market of plastic household goods, Tayg (Spain) also specializes in plastic, offering in addition a wide range of extension cords (including for energy-intensive equipment). Under the Terry brand from Terry Store-Age (Italy), constructions for storing almost anything are presented. The same group includes the companies Raaco (Denmark) and Plastiken (Spain).

Professional "toolmakers" who do not need any additional introduction stand somewhat apart. Among them are Atlas Copco (AEG and Milwaukee brands), Gedore, Metabo, Stanley, TTS (Festool and Protool). Russian companies include the Khabarovsk Kraton, Voronezh Enkor, and the Attack corporation. All of them produce products of interest to us, although, of course, this is not their main field of activity.

As for bags, pouches and other textile and leather products, then the palm, of course, belongs to the domestic manufacturer. There is no doubt, imports also come to us, but not everyone agrees to pay 900 rubles for a nylon bag or a simple leatherette roll. Therefore, the goods of the "Russian manufactory" are in a very advantageous position.

WE EQUIPMENT A WORKSHOP

Specialized imported wardrobes in our latitudes are rare "animals". Not the least role here is played by the external simplicity of the design, which is steeply "salted" by the price. However, something does occur. For example, Keter presents complete sets for the workshop - floor and hanging cabinets, a work bench, mobile pedestals (open or with doors) equipped with brakes on two wheels. An abundance of clamps, hangers and cells (including from the inside of the doors), numerous trays and shelves - all these little things allow you to maintain order even in the largest household. Tall (117-181 cm) cabinets are quite compact in depth (45 cm), the cabinets are slightly "thicker" (50 cm), and the workbench, on the contrary, is only 42.5 cm.

A small Keter shelf with cutouts for hanging screwdrivers and other things will not be superfluous - cheap (within 200 rubles) and cheerful. It is securely attached to the wall; stability is achieved due to hollow side stops, also used for water, which is necessary, for example, when working with a sharpener.

"Working" furniture is also presented under the Stanley trademark. Modular systems like these come in handy in the garage and workshop. They go on sale unassembled, in boxes. The frame panels are made of cast polypropylene, while the doors and internal shelves are made of galvanized steel, 0.6 mm thick.

A couple of interesting accessories are offered to complement the wardrobes and side tables. The first one is a 32x79 cm perforated polypropylene plate. It comes with a set of hooks and holders for hand tools that are mounted on the frame. The benefits of this approach
- everyone chooses the number and arrangement of elements independently, moreover, you can always make adjustments to the system. The retail price of the kit is approximately $ 8.6.

The second item is a plastic pallet that is installed in the cabinet instead of a shelf. It is equipped with three sockets for an electric drill (or a cordless screwdriver), one socket for a jigsaw, a file compartment, a case for drills (twelve standard sizes), a compartment for circles for angle grinders (up to 125 mm in diameter) and a number of slots for hexagonal inserts. The price is about $ 8.6.

Stanley cabinets are designed for floor installation. However, no one bothers to buy a set of wheels (with parking brakes) and put a table or even a cabinet on them.

Initially, only the workbench is mobile, equipped with two organizers for small things (on the tabletop and on the side). Side walls and inner sides of doors are perforated panels. The workbench is supplied with a set of holders, a plastic vice for "delicate" parts, a tray for tools and work gloves. For everything - $ 118.

The German company Gedore, famous for its professional fitting and assembly tools, offers a wide selection of mobile pedestal trolleys, as well as mobile workbenches. All of them are made of 1 mm steel sheets. At the same time, a special hot-drying powder coating "Gedorit" reliably protects the material from corrosion and mechanical damage.

All trolleys are equipped with drawers of various heights. Since they are designed for very heavy objects, special attention has been paid to the guides. The maximum lifting capacity of the bollards, depending on the model, is 210-500 kg. It is important that the products are equipped with at least one central lock, which is important in a large workshop, especially in the absence of strict control over visitors. Two wheels out of four have brakes.

The dimensions of the varieties most in demand today are 63x41x93 and 77.5x43.5x98.5 cm. The first includes six large boxes with a carrying capacity of 25 kg and a side compartment with one shelf in the middle; The perforated end wall allows you to attach additional hooks and clamps for screwdrivers, keys and more. The second holds six narrow boxes and one large (for a power tool, for example); on the side behind the door
- several folding compartments for small items. Price -respectively $ 566 and $ 950 (complete with Gedore tool kit - $ 699 and $ 1190).
Pneumatic panels are among the interesting innovative elements. They come in two types: 100 cm wide (fits the workbench) and 50 cm (fits the first of the trolleys described above).

The plane itself is 58.5 cm high, about the same length of the "legs" of the frame, mounted to the rear end of the furniture. A variety of hooks and holders for the most popular items are attached to the perforated plate (items are included in the kit or purchased separately). If necessary, the panel is lowered down and locked, so that an expensive tool is reliably hidden from "envious" eyes and "grabbing" hands. A high-quality mechanism brings it into working condition in a matter of seconds - just turn the key for the lift to automatically return everything to its place. The product can be purchased with a workbench or cabinet, or separately. Panel price - $ 972, with hooks - $ 1061.

As far as the workbench is concerned, Gedore offers customers a really strong design: the permissible load at rest is 500 kg, when working on the move - 300 kg. Two-piece steel "box" includes drawers (six narrow and one larger) and a spacious niche with an inset shelf. On the door there are two metal “pockets” and a holder for a torque wrench. All this is locked with a central lock. Above - a massive table top made of Multiplex beech plywood (optionally reinforced with steel). The minimum package includes the workbench itself; there are options with the "attachment" of a vice, pneumatic panel, "gadgets" for attaching to it and even a set of tools. They can be partly hung on panels, partly folded into boxes. The base cost is $ 1477, with the tool - $ 1650.

Metal furniture for workshops and garages is also represented by the German company Matrize (trade mark Matrix).

Owners of a large arsenal of various small parts (be it hardware or resistors) will certainly come in handy with stationary organizers
- desktop or floor. Some models are equipped with handles for easy transportation, and some thanks to the clutch system (most often
- "thorn-groove") allow you to build reliable "walls" from cassettes mounted on top of each other. There are similar products in the assortment of almost all the manufacturers mentioned above.
The Danish company Raaco offers stationary (desktop or wall-mounted) cassette organizers. Their difference from the vast majority of analogs is a metal case, which contains unbreakable transparent plastic cells. Depending on the size, they are suitable for table or floor installation; price - from $ 10.7 to $ 25.75.

In addition, there are cabinets with transparent boxes different sizes. Among them, there are original four-sided structures installed on a "turntable" pedestal. The assortment also includes shelving with perforated metal panels and the possibility of installing plastic pallets, as well as a wide selection of warehouse furniture.

MAGIC CHEST

A tidy workplace is great, but what if the place is here today and there tomorrow? The question is relevant not only for professionals, but also for “mere mortals”. Someone does not have a second set of tools at the dacha, someone has to outweigh the paintings three times a month and deal with sockets and wiring in the apartment of their beloved mother-in-law ... In general, tool boxes are not a luxury, but the necessary equipment. For those who are not too keen, this is just a godsend - all their simple belongings will fit in a couple of such products. It is necessary - I took it with me, it is not necessary - I pushed it into the corner of the closet and forgot.

As a "subspecies", let us immediately single out cases, similar to ordinary "city" suitcases. They, of course, are not so roomy, but they are much more compact, and it is much easier to carry them around the street.

Demand creates supply, so there is no shortage of boxes. As a first approximation, they can be divided into two groups: small, designed for screwdriver hammers, and more voluminous, where there is enough space for a drill, puncher, jigsaw, angle grinder ... Almost always there is an open tray under the lid with a handle and several compartments, and the cover itself is provided with "ears" for a small padlock.
The vast majority of products are made of plastic - polypropylene, for example. But there are exceptions - PVC, occasionally there are partial or all-metal ones.

The latches are usually made from the same material as the box itself, sometimes from more durable ABS plastic or metal. It must be said that the "concept" of boxes varies slightly from manufacturer to manufacturer. The main difference is that in small add-ons you should pay attention to the low square box (43x33x20 cm), which will fit a jigsaw, angle grinder, and a small lockable tray. Even more spacious (43x33x31 cm) are able to accommodate several "drill-like" tools or a circular saw.

Under the Italian trademark Terry are presented: a series rich in additions Pro, Metal with a metal bottom and front walls (sides and bottom - plastic) and a simple "all-plastic" Club.

The first of them can rightfully be called professional. The removable cover "in combination" serves as a storage for nails, dowels and other small things; underneath is a traditional portable tray. There are three standard sizes in the line: 24 "" (59x39.5x42 cm), 22 "" (57.5x27.5x29 cm) and 18 "" (44.5x26.5x25 cm); medium - with an additional smaller pallet. Even under the two trays, there is enough space for both hand and power tools.

Interesting 16-inch Tool Companion Professional. Side latches are made of impact-resistant ABS plastic, on the handle there is an anti-slip insert. Due to the ribbed base of the "legs", the drawer does not slip, inside there is a pull-out box with a removable tray. On the hinged cover there is an organizer panel with grooves for hand tools and consumables. It will hold six screwdrivers, a set of five wrenches and a set of drills. If desired, the panel is removed and used separately, facilitated by a foldable metal stand.

The Club series is more traditional and includes several standard hinged boxes. The “simple” Club has two translucent organizers on top, and the Club Classic comes with a practically flat reinforced lid that you can sit on if you want.
Another Italian brand - GDM from the Di Martino concern - represents Arka and Cargo crates. Thanks to the flat lids, they are boldly placed one on top of the other, without fear of the destruction of the "pyramid". In addition, there are "ears" for the belt to pull the stuffed box (for example, for a safety net during strong shaking).

Arka products are quite simple, the "insides" are limited to portable trays, dimensions - from 38x19.5x15 to 57.5x26x26 cm. In Moscow, the most compact version is mainly presented. By the way, containers are popular not only among craftsmen, no-wizards, because needle threads, scissors, hooks, knitting needles and other "frivolous" items also require orderly storage. Some models have added additional containers for small items. Cargo line duplicates Arka in size. The difference is in the increased functionality of the lids equipped with organizer cells. Transparent "windows" allow you to see the contents of each compartment. Retail prices range from $ 5.47 for the small Arka box to $ 17.23 for the largest Cargo.

The Spanish company Industrias Tayg offers several varieties: professional (No. 30-36 according to the manufacturer's classification) and universal fishing (No. 21-25). The boxes of the first group are equipped with a duplicate standard linear handle, which runs from one end to the other, and loops for inserting a belt, with which they can be worn on the shoulder. Their distinctive feature is that even with open latches-locks, the raised handle blocks the opening of the lid. Inside there is an open portable tray and a lockable box for hardware and other things. Sizes - from 44.5x23.5x23 to 58x28.5x29 cm. The second group is simpler, without "bells and whistles", but the lid has additional compartments for little things. Overall dimensions
- from 29x17x12.7 to 58x29x29 cm.

There is also a stationary (without a handle) "monster" 74x47.2x49.3 cm. The price of the "question" is from 150 to 1000 rubles. per box depending on the size.

The international holding "Attack" under the trademark of the same name presents a series of boxes made in Taiwan. Their marking is rather complicated; from a consumer point of view, they are divided into two groups: classic and "advanced", with a different design of locks and a more complex internal arrangement. In the first, everything is really traditional - a tray and a light lid with built-in organizers in the amount of three pieces. The lengths are 13, 16, 22 and 25 "", the last two drawers have a two-component handle, which is more convenient for heavy loads. The smallest retail price is 182 rubles, the largest - 883 rubles.

The second group includes strict products with a large number of stiffening ribs, a "blind" lid and complex "tightening" locks. Basically, they are somewhat elongated in length - 13, 17 and 22 ". Internal trays in the open box are lined up with a ladder, which makes it easier to access the tools lying on them.

An interesting "extended" version of the 13-inch box (31.5x19.5x16 cm). Its trays are also located one above the other; in the top - four closable sections, in the bottom - two on the sides and free space in the middle. The kit includes partitions, and grooves are made on the walls - you can make sections of the desired size. On the inside of the cover there is a lamp that allows you to easily find the desired object even in the dark. In addition, there is also a small hand-held flashlight inserted into the hollow handle, meaning the box is completely ready for night or basement use. Both are powered by two AA batteries.

Under the Stanley trademark, they offer three options: Basic and Jumbo "collections" and sets of metal boxes. The first line, as the name implies, is as simple as possible: an inner tray, standard sizes 16, 19 and 22 "; prices - $ 8, $ 11.5 and $ 31, respectively. Jumbo boxes with the same dimensions are equipped with two removable organizers on the lid and a system of grooves for storage of screwdrivers.And, finally, metal boxes of two varieties stand a little apart: yellow (more serious) and red (simpler).

The Danish company Raaco offers three series - Compact Professional, Solid Professional and "household" DIY. Copolypropylene, from which professional models are made, is characterized by high impact resistance even at very low temperatures (up to -50 degrees Celsius) and resistance to organic substances (solvents, oils). Compact boxes will be convenient for those who have to work a lot outside their workshop. A clever lid and locking system, a convenient tray and pull-out compartments with additional internal containers - all this allows you to optimize contents and make work easier. A number of models have removable longitudinal and transverse partitions. By the way, if necessary, they boldly stand on the product. Solid models are more suitable for storing bulky equipment (for example, a car jack or a pump), and the household series will be useful for home craftsmen.

Depending on the size, professional models will cost € 5.52-73, household ones - € 4.34-31.16.

There are also two types of portable organizers - with a shock-resistant base and completely unbreakable. The latter (the Carry-Lite series) from the inside are a system of pencil cases, both standard sizes and made to order.

Plastiken (Spain) produces traditional models characterized by modern design, rich colors and a low enough price for their quality. The highlight of the lineup are portable organizers - various sizes, attractive appearance, fixed or mobile dividers. A novelty has recently appeared - the original two-sided model.
Boxes will cost € 5.5-27.6, organizers - from $ 0.6 to $ 10.1.

Voronezh "Enkor" offers a wide range of metal boxes at a price (wholesale) from 255 to 930 rubles. and a couple of plastic models. Plastic boxes are included in the assortment of the production company "Kraton" (Khabarovsk). The assortment is divided into three groups: with one and two plastic clips, or with metal clips. Length - 32 to 66 cm: large drawers are equipped with a two-piece handle. Price - from 203 to 1164 rubles.

NOT ONE TOOL

Speaking about containers for tools (especially power tools), one cannot fail to mention the products of masters of this direction. In the nineties, in addition to Festool products, the Systainer storage and transport container system was developed. In 1993, it was named one of the best products of the year by the Plastic Consumers Association and received the Packaging 1993 innovation prize, and in 1994 - the Prize for Outstanding Innovative Solutions at the International Crafts Fair in Germany. In addition, Systainer's designs have won the prestigious IF Award.

Today these boxes are used to pack Festool and Protool tools and are also sold separately. There is a whole family: four basic models (395x295 mm) in different heights - 105, 157.5 and 315 mm, an extended version of the Maxisystainer (590x390x210 mm) and a miniature Minisystainer (265x170x70 mm). All of them, except for the smallest, are vertically compatible with each other; the stack is securely fixed with side latches. Empty boxes are sold separately, as well as foam tabs - solid, molded and "raster", allowing you to independently make a nest of the desired relief. The Systainer IV (the deepest) has a multi-tiered plywood insert for orderly storage of locksmith and joinery accessories. Models I-IV will cost 1295-2035 rubles, "maxi" - 3737 rubles.

Modularity and compatibility are retained in the next generation of products. Sortainer - what is needed to “injure the order not only“ on a large scale ”, but in small things. Everything that is indestructible is laid out in drawers - large and small, using additional jumpers. When equipping a workshop, one more feature will be useful: both "facades" are equal, so that two workers can use one "sortiner". It is enough to put the box between them and install some of the sections "back to front". Despite the complexity, "sortainers" are distinguished by their reliability and durability, it is not for nothing that the perimeter is reinforced with aluminum inserts. The cost, depending on the number of boxes, is 4150-4625 rubles.

For the convenience of working in the workshop, there are so-called ports - steel racks for containers with a height of 50 or 100 cm, equipped with wheels by default. The first comes with three, the second - five shelves. A nice addition is the central locking that blocks the removal of the contents.
The drawer system "a la SYSTAINER" under the name Metabox is offered by another well-known manufacturer - Metabo.

Our readers are familiar with the AEG trademark. To make life easier for craftsmen, the manufacturer supplies VarioBox boxes. Buyers of AEG power tools receive them by default with a profiled pallet, but thanks to the standard dimensions, they will also fit other companies' products. Boxes are sent to "independent swimming" with a universal foam pad. There will be enough space inside for cartridges, drills and other "clues".

There are two types of boxes: 13.2 or 19.2 cm high, LxLU - 47.5x35.8 cm. The contents are reliably protected from water and dirt ingress, falls and other troubles that are common on the construction site. Sophisticated geometry and rounded stiffeners "hold" significant shock loads; a significant role in this is played by the material - ABS plastic (copolymer of acrylonitrile, butadiene and styrene).

The ledges in the corners allow you to safely stack boxes on top of each other, without fear of destruction of the stack. If desired, they are fastened together using separately purchased connecting brackets. In addition, there are "ears" for the padlock. The cost of the compact version is 700 rubles, the more spacious one is 900 rubles.

In addition to the VarioBox, there is the DynaCase - those red "suitcases" that Milwaukee's tool comes in. They have the same characteristics as the VarioBox and, moreover, can be linked together without any tools at hand. By the way, in 2002 the suitcases won a prize at the competition for plastic products.

The motto "I carry everything with me" is certainly true, but it is not always necessary to carry with you a bulky box with a full "gentleman's kit". In this case, it is worthwhile to dwell on a case where, say, a drill and “clues” to it will fit. And it is easy to wear, and it looks good. To ensure the versatility of such products, they are usually equipped with a textured foam insert. It prevents the content from thunder-x and "mixing" and at the same time provides compatibility with different models.

Keter has two cases for the power tool and the professional one for the drill. Both are equipped with an internal organizer with several compartments for accessories and hardware. The dimensions of the first are 36x32.5x14 cm, the second - 39.5x34.5x16.5 cm.

Terry's Club line also includes several models. Dimensions - 38.7x34x13 or 39.2x34.4x8 cm; the first one is presented in two versions - a simple one and with an organizer on the outside of the lid. Retail price - approximately € 12.9-13.8 depending on configuration.

Di Martino (trademark of GDM) offers only one case - from the Cargo series. Accordingly, its cover is equipped with four compartments for small parts and one larger compartment for keys, screwdrivers and other things. The case is quite compact - 38.5x34.5x14 cm; retail price - about $ $, 1.
There are corresponding models for Raaco -35.5x33x13 cm. Inside there is a foam-rubber tab, the top is tight or with a removable cassette holder. Price - $ 9.2 and 11.5 respectively.

Plastiken also manufactures compact cases for drills and the like, with a foam pad and an organizer on the top lid. By the way, it has prudently separated nests for drills for wood and metal-concrete. On the inside, on the wall, there is a table of correspondences between the diameters of the thread-drill and screw-dowel.

WELL SHOW YOUR SUITCASE!

Serious, downright VIP products should be singled out in a separate group. The demand for them, of course, is not rush, but there is. For example, the Tayg assortment includes robust and solid suitcases in black leather or silver metal. A drill, a screwdriver, a hand tool do not lie around randomly inside, but are fixed with hinges on the insert folder or on the side walls. By the way, the “tool folder” can be taken out if desired (it is secured with buttons), so that a capacious, reliable and representative case is obtained for transporting anything - packing papers, packing personal belongings, packing money. At retail, this pleasure will cost about $ 100.

Raaco produces the so-called Servicecase - a large suitcase with a combination lock made of polycarbonate (a plastic that is characterized by increased mechanical strength).

Thanks to rubber pads on the body case does not slip even on the smoothest surfaces. Inside, everything is provided for orderly storage of products, including a convenient patented design of clamps, which allows you to securely fix the instrument in them in one motion. The number of trays and other attachments is determined by the user. By the way, the Servicecase is waterproof when closed.

The German B&W trademark is the Profi line of suitcases. The plastic Profi Compact (43.5x32.5x18 cm) is specially designed for the needs of electricians: a removable Velcro insert and a buttonx, has 30 pockets for anything. The lower part of the suitcase is quite roomy, if desired, it can be divided into compartments with plastic partitions inserted into the grooves around the perimeter. Profi Easy, made of durable ABS plastic with protective aluminum edge, is slightly wider.

There are 31 pockets on the upper insert and 15. On the lid there is also a two-section folder for papers, it will certainly be appreciated by experts working on the road. And finally, the Comfort model - a reinforced leather case, an open top, tool holders on all inner walls. The first suitcase costs € 97, the second € 118, the third € 64.

In addition, a truly supercase from B&W - MultiTank - has recently appeared in Moscow. This is a real niggle for protecting expensive capricious equipment from environmental influences, especially in extreme conditions. Made of high-strength plastic, MultiTank is guaranteed to withstand temperatures from -25 to +80 degrees Celsius. When closed, the box is dust-, water- and air-tight. The humidity inside is controlled by a built-in hygrometer, the scale of which is placed on the front panel. There is also a pressure compensation valve. The MultiTank is supplied as standard with a thick foam pad on the lid.

Additionally, they acquire a soft insert in the lower part with removable (again, soft) partitions or a universal foam insert. Due to the lattice there are numerous slots in it, it is easy to form a depression for any non-standard device. The suitcase is available in two sizes (along the inner walls) - 42x30.5x17 or 48x36.5x18.5 cm, and in three colors - black, orange and yellow.

A GOOD CART IS A THING!

For comfortable travel around the city, especially a small one, a wheeled means of transportation will certainly come in handy. You can, of course, use a gas trolley bag, but this is not always convenient and far from aesthetically pleasing. Almost all manufacturers have guessed to put their boxes on wheels, and many have modified them to the next stage of development.

Let's start with the Israeli brand Keter. The simplest thing we are offered is a large (24 "-61.5x28x28 cm) Omega drawer with two wheels and a handle. The assortment also includes more spacious carts - MasterMate and MasterCart. The dimensions of the first one are 69x35.5x41 cm, that is, in the "state of rest" it is a relatively low long box, while the second (46.5x27.8x62 cm), on the contrary, is elongated vertically.

Wheels made of dense rubber on a sturdy metal axle allow transporting the box on almost any surface, and the length of the handle is matched to the average male height. By the way, MasterMate is sometimes used as a mobile gas welding complex - two cylinders fit perfectly into the cart.

MasterCart is a high two-section building. The upper part is a fairly capacious removable drawer with numerous compartments for hardware (on the lid and on the front), equipped with a standard handle. The lower compartment, completely empty, is designed for heavier and larger items.

Capacious mobile boxes are also present in the Tayg range. All of them are made according to the general principle - "horizontal" box, rigid plastic wheels on a metal axis and a telescopic metal handle that fits into the grooves on the sides of the container.

Two standard sizes are presented: 67.5x47.2x41.6 and 77.5x47.2x49.3 cm. Each of them is equipped with two open portable trays and, at choice, two closeable boxes or five miniature brackets. With the help of the latter, part of the content (for example, a level, a hacksaw, cutting discs) is fixed on the inside of the lid, so that objects (especially piercing and cutting) do not dangle randomly in a common heap.

Stanley makes both a simple metal container on wheels for transporting heavy items and more functional items. As for the first (62x40.8x38.3 cm), it is equipped with a telescopic aluminum handle for towing, a removable pallet and a storage compartment for the level. The lid is designed in the same way as other Stanley professional boxes (V-groove, metal cladding). The container costs $ 78. The large diameter of the wheels (145 mm) guarantees stability of movement. There is also a "two-story" model - a standard drawer mounted on a large 23-inch - for $ 106.

The extended version is "three in one", consisting of three separable sections. First (top)
- again a standard "yellow box". The second
- a block of large and small (with several cells) pull-out compartments for small items. Third
- spacious compartment for power tools with a folding front wall. Inside, on the side, there are grooves for cutting discs and other things, outside there is an elastic cord for fixing long objects (the same levels) and "horns" for winding the cable. Dimensions - 57.9x36.7x75.9 cm. "Amateur" version ("two in one") - based on a red box, with one-piece compartments. The first cart costs about $ 174, the second $ 127.
"Mobile builder's box" (62x42x38 cm)
- made of plastic. There is a large compartment at the bottom, two removable pallets on top, and the upper one is an integral part of the structure - without it the box will not close. On the lid there are two compartments for small items and a folding handle with an anti-slip pad (a pull-out metal is used for towing). At retail, the product costs $ 61.
And one more option is a three-in-one structure (48.8x31.5x82.2 cm), which can rightfully be called a rolling workshop (Rolling Workshop). It consists of three detachable compartments: the lower
- for oversized tools, middle - three drawers for small items, and the top
- an ordinary tool box with a pallet. On the side is a coil for winding an electric cable. A retractable metal handle serves for movement. This "locker" will cost about $ 71.

Drawers on wheels made of frost-resistant impact-resistant polypropylene are available in the Raaco range.

Khabarovsk "Kraton" in June 2004 released three new items "on wheels". Their cost is from 1000 to 1911 rubles.

I carry everything with me

Everyone who has come across work at a height - even on the roof of a country house, even on a stool - remembers how inconvenient it is to jump up and down every five minutes after a drill, self-tapping screw or hammer. To make life easier for the master, there are various kinds of devices, including numerous large pockets on the overalls. We will not dwell on cutting and sewing, especially since a lot has already been thought out, sewn and tailored - tool bags have long been in use throughout the civilized world.

Depending on the method of wearing, they are divided into shoulder and belt. As for the material, there are two "leaders" - leather and nylon fabric, tarpaulin and leatherette are less common. As for the skin, the "pluses" are obvious: it is thick, strong, perfectly keeps its shape, it is not afraid of nails or sharp objects.

Among the "minuses" - noticeable weight, problems with getting wet and difficulty in cleaning. In addition, the choice of colors is not rich, and leather is not so cheap. Nylon, on the other hand, is available in almost every imaginable color, dries quickly, weighs little and at the same time has sufficient strength. However, he is afraid of sharp edges, easily shaggy (especially at the seams) and with intensive use is unlikely to last longer than six months. In general, there is no absolute favorite.

The Moscow company "Dromader" offers both types of products: almost all leather models have approximate analogs in nylon (the discrepancy is due to the characteristics of the materials). The patterns were developed partly on the basis of foreign analogues, partly on the basis of the experience of ours, domestic, builders, installers, and electricians. All waistbands fit both a plain harness and a standard harness. By the way, the company "grew" out of the holster shop, so he has a solid experience of working with such a difficult thing as leather.

The absolute leader in sales is the Pyramid leather pouch. It is put on the belt by means of loops located on the seamy side; there is also an additional version with holster springs ("Pyramid PP"), which can be unfastened without removing the belt from the belt. Three compartments will fit several screwdrivers, wire cutters, pliers - in general, the minimum required for an electrician. Price -245-280 rubles.

A nylon "understudy" called "Sail" will cost 120 rubles. As an addition, the small pouch "Box" is suitable for hardware items. Those who have to "operate" a lot with a drill or screwdriver (especially at a height) will certainly appreciate the "Groot" holster (230 rubles) or its analogue "Canyon" (120 rubles).

Double bag-belt "Caravan" is designed for handymen and in general for everyone who needs the maximum amount of available tools. Two large pockets, two smaller ones, several sockets for small tools, a loop for a hammer and a compartment for a tape measure - all this is worn either in the front like an apron or on the lower back. All the fun - 710 rubles. (the nylon analogue "Volcano" will cost 352 rubles). A single option - "Dromedary" - costs 440 rubles. For roofers, the models "Dome" (400 rubles) and "Krona" (135 rubles) are intended, with two loops for hammers and a volumetric compartment for nails.

A simple but original device "Crab" (103 rubles) will be useful to the maintenance personnel of houses, hotels, office buildings. This small belt pad has a hammer loop, four screwdriver slots, and more. and a carbine - it is convenient to hang the keys from the premises on it.

For city trips, the Dromader company offers a Kin nylon case (700 rubles), which looks almost indistinguishable from an A4 business bag. A folder with sockets for screwdrivers and pliers is mounted inside. There is also a compartment for papers.

Which tool box to choose - video:

DIY tool case

If you are often involved in repairs, then you definitely should have a tool box on the farm. However, he should be in every man's house. You never know what: suddenly the plugs will knock out or the tap will flow. All necessary supplies should be stored in an accessible, dry and convenient place. But keep in mind that different tools require different conditions. Some need special nests, others need to hang from nails, and so on. You shouldn't dump all your wealth in one heap. This deteriorates the instruments. In addition, you will have to waste a lot of time every time looking for the right screwdriver or pliers.

The toolbox should be purchased based on the area in which you intend to use it. It may be needed for household needs. That is, in it you will transport many items at a time, store equipment, small parts. The second area of \u200b\u200bapplication is in construction. The third is for rest and leisure (you can store tackle or hunting accessories in this). And, finally, it is sometimes necessary for the maintenance of electrical and plumbing systems.

Tool box: basic types

1. Containers. Usually have a trapezoidal or rectangular shape. In this case, all four walls and the bottom of the container are connected. The box has a lid and can be equipped with a handle. The container inside is equipped with compartments and compartments.
2. Case - such models look like small suitcases. They are distinguished by a spreading design. There are screwdriver holders on the inner walls, and so on.
3. Stationary options - cabinets. They are usually installed in workshops, garages, and so on. They are equipped with wheels, that is, they are mobile, but it will be problematic to go far with such a box.

Folding boxes are recognized as the most compact and convenient. They save a ton of space. They are easy to store and transport.

Materials

1. Plastic boxes have many advantages. They weigh little, usually their surface is frost-resistant - this protects the tools from temperature extremes.
2. The aluminum tool box will be strong, stable and tough. Moreover, the weight of such structures does not increase significantly. Compared to steel, aluminum models are lighter. They are suitable even for large equipment and electromechanical devices. Besides, aluminum is not afraid of corrosion.
3. There are also wooden boxes. But they are usually used for storing small-sized metal parts.

Useful Tips

A good model should be able to support up to 20 kilograms. Its walls do not deform after full loading. The lid is ideally equipped with a snap-on mechanism. You need to choose in size. The toolbox can be up to 20 cm long, or even half a meter.

Price

Already figured out how to choose a toolbox? The price is what interests in the first place. A box from Stanley will cost you from 100 to 5 thousand rubles. And the Polish company Curver offers a range from 200 to 1600 rubles.

Finally, remember that the tool box needs maintenance - just like the items stored in it. If you love order and want your workplace to always look neat, then be sure to buy a comfortable boxing model.

Jigsaw, etc. It is a container with a handle and an organized interior space with trays and compartments for grouping tools.

For what purposes is the tool box used

The use of the box provides the following tasks:

• Compact storage of accessories.
• Convenient tool organization for quick access.
• Lightweight transportation.
• Preventing unauthorized use of the equipment by unauthorized persons.
• Dust protection.

Thanks to the organized internal space with external compactness, a large set of tools can be placed inside the box, which, when unfolded on a shelf, will take up many times more space. In the box, it is reliably protected from moisture penetration, as well as from loss, since everything is closed with a tight lid, with rare exceptions.

Drawers are often equipped with an eyelet for installing a conventional padlock. A box for home use or placement in the trunk of a car usually does not have it, since it is always sheltered from strangers. As for the boxes of professional builders or repairmen, they must be securely closed, since equipment is often left overnight or on weekends at the site. As a result, during the absence of the owner, other craftsmen can use his tool, thereby accelerating wear. The lock will prevent this, but naturally will not protect in case of theft. Its main task is not to allow unnoticed use of the contents of the box by strangers.

The drawer allows you to keep the entire tool together. If you need to make an emergency visit by taking the box, you can be sure that everything you need to carry out the repair will be at hand.

Drawer components

The tool box usually consists of the following elements:

• Box.
• Internal trays.
• Cover with curtains and latches.
• Organizer.

The box is a rectangular rigid hollow container, which is covered from above with a lid. It can contain pull-out trays, adapted to accommodate various tools. Often they have retainers for installing bits for a screwdriver, screwdrivers and other small devices. Also, many drawers have an organizer. It is a small tray, divided into many small cells in which,. The organizer is often made of a transparent material. This makes it possible to evaluate the contents even before the lid is opened. Usually the organizer is located on the outside of the box body and has its own cover. Thus, if you need to get a change, you do not have to open the main box.

Large boxes, in which, in addition to hand tools and electrical appliances, are often equipped with wheels, which facilitate their movement. In addition to the basic essential elements, the branded expensive assortment also has many additional extensions:

• Built-in powerbank for charging mobile and other equipment.
• Mini fridge for cooling drinks.
• Radio for creating background music.
• Spotlight for illumination when working in the dark.

Such perfect equipment is practically not in demand, since its cost is calculated in the range of $ 600 and more. Buying such boxes is impractical from a practical point of view, since additional equipment leads to an increase in their weight and loss of capacity. Still, the presence of such extensions has a positive effect on the working mood.

Materials for the production of boxes

The tool box can be made of materials of different properties. This could be:

• Wood.
• Metal.
• Plastic.
• Metal-plastic.

Wooden products have the lowest wear resistance. In the event that they work with a tool that touches machine oil and lubricants, then the walls get very dirty and no longer rub off. Usually these boxes are used by carpenters. Their characteristic feature is the absence of a cover. These boxes are chosen for storing woodworking tools such as nail files.

Metal an excellent solution for the box, as it is resistant to mechanical stress and has a long service life. Iron protects tools equally well in heat and cold, while more specific polymer materials lose their ductility and can burst. A huge drawback of metal boxes is their heavy weight.

Plastic The toolbox is completely moisture resistant and is incredibly light compared to other materials. At the same time, he is often afraid of frost, therefore, at negative temperatures, you cannot hit him, so as not to cause a crack in the case. The main disadvantage of such an assortment is that it wears out quickly and also breaks down under mechanical stress. This is especially true for curtains and snap-on covers.

Reinforced plastic represent a cross between metal and plastic. Such intermediate products usually have latches with metal staples, which increases their resistance to the classic breakages of similar products.

Box shapes

The tool box can be of different shapes:

• Open box.
• Case.
• Container.
• Transformer.
• Drawer unit with pull-out elements.

Open box is the simplest design. It often does not have pull-out trays. Such products are represented by wood boxes. They are used for storing carpentry tools as well as screws and nails. Such equipment is used for convenient placement of the tool in the workshop, but not for transporting it over a distance. If you put such a structure in the trunk of a car and overturn, then all the contents will fall out.

Case quite a good design, which is a small suitcase. Usually there are no pull-out trays in it. The whole structure consists of two halves, inside which there are niches for the location of the tool. Often, such a box is sold already with screwdrivers, pliers, and so on, placed inside. Cases are designed for household needs and storage of the most popular tools. They fit tightly inside and are fixed in their own niches, so when carrying a suitcase, a clanking sound is practically not generated.

Container is the most common option. This group is usually represented by the plastic assortment. These are very spacious containers, but they usually have a small number of trays, so the tool has to be stored in bulk, and later spend time looking for it.

Tool box transformer usually made of metal. This is a design known to many, which has been used since Soviet times. It is quite popular because it allows you to group equipment into categories. Such a box consists of paired trays placed close to each other and connected to each other using flat overlays. When assembled, the structure is a classic rectangular box. At the bottom there is one largest tray, the width of which is equal to the sum of the two small trays above it.

Also common are pedestals with retractable elements, which have a high capacity, but are not suitable for long distance transportation. They are made of metal and equipped with 4 castors. These boxes are designed to store hand tools and move them around the workshop to the work area. They are usually chosen by auto mechanics for installation in a garage or service center. When using such boxes, it is necessary to have a good floor covering for easy movement of the wheels. A table top is fixed at the top of the cabinet, often with trays for laying out the necessary wrenches and other equipment.

Weaknesses of low-quality boxes

When choosing a tool box, you must first of all pay attention to the quality of the material. Metal, wood and plastic are almost equally good if they have sufficient rigidity for the chosen shape and size of the box. Often the cheap Chinese assortment is represented by plastic boxes that fall apart right in the hands, even when half loaded with the tool. The same goes for metal products. It is not uncommon to find large boxes that are too thin for the loads intended for them.

In addition to checking the rigidity, you also need to make sure that the locks that close the sliding elements and the cover are reliable. If they initially do not work as needed, then it is not difficult to imagine what will happen to them after a month of continuous operation of the box. Also a common problem is the deformation of the box when the latch is closed, as a result of which it cannot fit into its seat. To avoid such a purchase, it is necessary to try to open and close the locks several times; if difficulties arise, then such a box will not last long.

Special attention should be paid to the wheels. It is necessary that they sit on a metal axle. If they are completely fixed with plastic elements, while the box is designed to carry several tens of kilograms of the tool, then such wheels are just a beautiful dummy and will fall off almost immediately.

It is generally accepted that a tool storage box is a regular rectangular box with a bottom opening from the top, equipped with special recesses and side pockets designed to store a set of small construction tools.

However, a more diverse range of similar products can now be found on the market, significantly differing from generally accepted standards. To understand what is right for you, you should study the possible options more carefully.

Boxes-cases are called so because in appearance they look like spreading suitcases, equipped from the inside with fasteners, lockable boxes with lids, and other various containers for storing construction and locksmith supplies. The mobility and removable design of the inner walls of the boxes allows, if necessary, to adjust their size and capacity to the required ones. The top box is equipped with a handle, which makes it easy to carry from place to place.

Container boxes - most often, have the shape of a trapezoid, the walls with the bottom are tightly fastened into one whole, on top there is a lid with a handle. Inside the container there is a large number of containers, some of the walls of which are movable, there are special pockets for storing small items. Sometimes such containers from below can be equipped with wheels, as well as separate boxes that open simultaneously with lifting the container lid.

Collapsible toolboxes when closed can save up to 70 percent space. The design of their side walls and internal boxes is such that it makes the process of unfolding and assembling incredibly easy and comfortable both at the time of movement and during normal stationary storage.

Design features of tool storage boxes

The structure of a conventional toolbox is not unique. As we have already found out, it, most often, has a cubic shape and opens with a lid. However, there are nuances that should be considered at the time of purchase, deciding on the option that is right for you.

First, the bottom of the box should be examined. It should not be too thin, made of durable material, seams and adhesions should be made with high quality. Compliance with these conditions will ensure the durability and reliability of the bottom of the box, which bears the entire weight of the contents placed in it.

Secondly, pay attention to the stiffness of the walls, it should be significant. This will ensure the integrity of the box, help to avoid deformation. In order to strengthen the strength of the walls, the corners of the boxes are additionally equipped with solders - for polymer boxes, special brackets or mini-profiles - for metal containers.

Thirdly, it is worth looking at the lid, its device should simultaneously protect the items stored in the box from the destructive influence of external conditions, and ensure the convenience of carrying the box, thanks to the handle attached to the top. So, you should especially carefully check the condition of the locks, the quality and reliability of fastening the lid to the box, the handles to the lid.

The fourth feature of some boxes involves the presence of containers for storing small items (nuts, screws, nails, staples, etc.), which are securely attached to the walls from the inside with special fasteners and can, if necessary, be removed.

The fifth feature is the presence of wheels attached to the bottom of the box, allowing it to be easily moved along the ground.

The sixth feature is the variety of dimensions, allowing you to choose the most appropriate option. To work with a limited set of tools, there are small boxes, for the most numerous tools, we choose more spacious and large models.