How to work with a cursor without a mouse. Mouse cursor control using the Num Pad keyboard. How to play without a mouse
So, we remember that the user experience is largely capable of providing. When you use keyboard shortcuts, you get the opportunity not to waste time opening a menu to launch a program or select the required option, but sometimes knowledge and use of hotkeys is simply necessary. For example, if for some reason the mouse does not work (due to its unexpected technical breakdown or problems with the software operation of USB equipment), as well as in the case when, when working with graphics, you need to move the mouse cursor with very high accuracy. In such a situation, you can use the accessibility features of Windows to emulate a mouse using the keyboard. Precisely about how to do without a mouse, when working with a computer, I will tell you today.
I will warn you right away, this article is not for beginners, but if you want to figure it out, I think there will be no problems.
How to control a computer without a mouse? Mouse emulation using keyboard.
To start the emulation mode, press the sequence key combination: Left Alt + Left Shift + NumLock.
In the dialog box that opens, click the "Yes" button and after that the mouse emulation mode will begin to operate.
Also, the system will prompt you to go into accessibility mode to configure. Pay attention to the "Customize mouse buttons" window: it allows you to specify options for the behavior of the mode (for example, the speed of movement of the mouse pointer, etc.).
When the mode is launched, a characteristic icon representing a mouse is displayed in the system tray (the notification area, where the clock is).
To exit this mode just press Left Alt + Left Shift + NumLock again.
Hot keys in this mode are located on the numeric keypad on the right. We do not use the central "number" buttons (for a laptop we use a small numeric keypad). So that you understand how to work without a mouse, we will consider these keys in more detail.
NumLock helps to pause and re-enable mouse emulation mode. When you click it, the mouse icon in the tray is crossed out.
Often, even the key itself has a mouse symbol.
All number buttons, except for "0" and "5" are directly responsible for moving the mouse pointer in all directions. While holding down the keys, the pointer "slides" across the screen.
The Ctrl and Shift keys help to slow down or speed up the movement of the cursor, provided that these modifiers are allowed by the settings (the corresponding tab at the initial stage of starting the emulation mode).
Button "5" is a click. Double-clicking allows you to make a quick successive keystroke. The mouse button that is emulated depends on the mode you are currently in.
The "+" button double-clicks the key (as well as successive pressing "5")
"/" Is responsible for switching to the left mouse button mode.
"-" turns on the right button.
"*" Is responsible for switching to the mode of both buttons simultaneously.
"0" is holding any mouse button, and "." - releasing the key.
The current state and activity of all the commands described above is displayed in the system tray.
What Windows keyboard shortcuts will be especially useful, and how to operate a computer without a mouse if it is not at hand?
The most simple computer hotkeysthat you often use both in File Explorer and on your desktop are:
- Enter - replaces double click;
- Delete - deletes the object.
Other convenient keyboard shortcuts that are useful in emulation mode:
Win + B - switches focus to the system tray. Next, you can use the arrow keys to select, Enter to simulate a double click, and Shift + F10 to simulate a right click.
Win + E - launches explorer, and Win + F launches explorer, showing the search bar.
Win + R - opens the Run Program dialog.
Shift + F10 - Displays the context menu of the current object.
Win + L - locks the computer.
Keep in mind that in this list, hotkeys, as in many others, do not matter: it can be both Russian and English. That is, the combination Win + R in the English layout does the same thing as Win + K in the Russian one (i.e. it opens).
Also, hotkeys can be assigned to shortcuts that are located on the desktop. To do this, open the shortcut properties dialog box.
In it, go to the "Shortcut" tab and place the cursor in the "Shortcut" field. Now press the desired key combination. For example, Ctrl + Shift +<буква> or Ctrl + Alt +<буква>... Instead of letters, you can also use one of the function keys.
Little trick: if you are not sure that you can quickly memorize all the necessary hotkey combinations - make yourself a hint in the form of a screensaver on your desktop. Whenever you need it, just press Win + D and you have a handy cheat sheet with a list of hotkeys in front of you. Press the keyboard shortcut to cancel the command and continue working.
And to consolidate the information that how to control the cursor without a mouse, do some simple exercises:
- Select any shortcut on the desktop (for example, antivirus) and assign a keyboard shortcut to it. Run the program with shortcut.
- Activate the emulation mode and disconnect (!) The mouse from the computer (or lock the touchpad) and perform several usual operations: open a folder, create a text document, open, lock a PC, etc.).
I hope you understand how to use a computer without a mouseusing its full capabilities.
Train every day, and soon the use of short commands will become a habit, and work with a PC will be faster and more productive, and you will be able to perform all the necessary operations even without a mouse!
21.03.2017 Frenk 9 comments
Your mouse stopped working or just stuck? Are you desperate? Do not worry! You can work on a computer or laptop with windows 7 - windows 10 or XP without a mouse and even without a keyboard shortcut.
In this case, you can work without a mouse and control the cursor with the mouse control keys. This is a standard feature of all versions of Windows and you don't need to install anything.
This feature allows the keyboard to completely replace the mouse. When working without a mouse, you can not only use the cursor, but also paste and copy, save or write on the Internet.
In short, you can completely do without a mouse, although at the first stage such control may seem a little awkward.
Only I assure you will get used to it very quickly, this is especially true for laptops in which the touchpad was used.
Of course, the fact that the mouse is more convenient is always difficult to argue with, but for several days it is quite possible to do without it.
There are also programs that help you move the mouse more efficiently without a keyboard - try what suits you best. All this is covered in the guide below.
Cursor control from keyboard without mouse
To start cursor control from the keyboard without a mouse in a computer or laptop, alternately press the combination left Alt + left Shift + Num Lock.
Immediately after that, you will hear a beep and see a window, as in the figure. In the window that appears, click the "OK" button.
Now you can move the cursor using the numeric keypad (press and hold a specific key).
The picture below shows a diagram. Each digit indicates the correct direction of the cursor.
To exit an activated keyboard control function, press Left Alt + Left Shift + Num Lock again.
Key operations without a mouse
In general, the control process is a numeric keypad, which is part of the keyboard on the right side. Main functions:
- Num Lock - on and off. If you disable the mouse keys, the keyboard will act as a numeric keypad again.
- Key 5 - right mouse button.
- Key / + 5 - LMB.
- Button _ - RMB.
- Button * - both mouse buttons.
- Button 0 - select and drag. In this case, there is no need to hold it, you only need to press it once. It can also be used for scrolling.
- The Del button allows you to drag and drop a file.
- Numeric keys - cursor control and not only right, left, up and down, but also intermediate directions.
If the function is enabled, an icon will appear in the tray (lower right corner). It shows if the function is active.
If you click on it with RMB, then the settings will appear, among other things, set the cursor speed.
Cursor programs without a mouse
If "trouble" has already arrived, and you need to work quickly, do not forget about hot keys. It's hard to get used to them right away, but there is a way out - programs will come to the rescue.
First Hotkeys program (free). After installation, press and hold the "Win" button (or "Win" + "Z") for a few seconds.
Then a virtual keyboard will appear on the screen, which will show all available keyboard shortcuts.
The second program is "LabelControl". After installation and pressing Ctrl, you will see numbered items for cursor control.
If you work with browsers, then pay attention to Firefox and the extension to it "Mouseless Browsing".
With its help, you will instantly go from site to site. Similar extensions are also available in other browsers (I don't remember the names now).
To write this guide I was inspired by the fact that my mouse broke. This made me learn to use another option to move the cursor.
I think this knowledge might be helpful to someone else and hope this text helps someone else.
If something goes wrong for you as described, ask in the comments. Whoever asks will not get lost. Good luck.
It's hard to imagine working on windows 7, windows 10, with windows XP without a mouse. It is only when a device stops working that most of us become helpless, and the operating system suddenly becomes an impregnable fortress.
Usually in this case, we try to remember the keyboard shortcuts that will allow us to take the simplest, basic steps.
However, if memory fails, there is a way to at least simulate a mouse.
Windows allows you to control the mouse cursor using the numeric keypad. Here are tips, methods, instructions.
- Win + D: Minimize or restore all windows.
- Win + E: Launch Windows Explorer.
- Win + F: Start searching for files.
- Win + Ctrl + F: Start searching for computers on the network.
- Win + R: Displays the "Run" dialog box.
- Win + Break: Displays System Properties.
- Win + L: Change user (Lock your computer).
- Win + M: Minimize the window.
- Win + Shift + M: Roll back minimizing the window.
- Win + TAB: Loop through the buttons on the taskbar.
- F1: Help.
- CTRL + ESC (Open the Start menu)
- ALT + TAB: Switch between open programs.
- ALT + F4: Closes the program.
- SHIFT + DELETE: Delete the file permanently.
How to control copy and paste on the keyboard without a mouse
- CTRL + C: copy.
- CTRL + X: Delete.
- CTRL + V Paste.
- CTRL + Z: Undo.
- CTRL + B: bold text.
- CTRL + U: Underlines text.
- CTRL + I: Cut.
General commands for controlling the keyboard without a mouse
- SHIFT + F10 opens a menu for the selected object (acts like a right mouse button).
- ALT + SPACEBAR: Opens the program's system menu.
- CTRL + F4: Closes the inner window, but not the program itself.
- ALT + F6: Switch between windows of the same program.
- F5: Refreshes the current window.
- CTRL + A: Select everything in the window.
- BACKSPACE: Return to the top-level folder.
Controlling keyboard without mouse in explorer
- F2: Renames.
- F3: Search all files.
- ALT + ENTER: Open the Properties window for the selected item.
To write this guide, I was inspired by the fact that my mouse broke - it was night and I didn't have another.
By the way - mice are not always repaired - if the laser is flying, you can forget about it forever.
This made me learn how to use keyboard controls without a mouse. I think that this knowledge may be useful for someone else.
I hope this text will help you to continue working on your computer (in a laptop it is easier - there is a touchpad, but with it you can only control the cursor and call the context menu).
9 thoughts on "How to use a keyboard on a computer or laptop without a mouse"
- All modern keyboards have the Windows logo key in the bottom row of keys. By clicking it, open the Start menu.
- Now it is worth using the arrow keys "up" - "down" and "left" - "right". And also by pressing "Enter".
- To go to the "Mouse" tab in the "Accessibility" window, use the "hot" keys "Ctrl + Tab".
- From within the tab, use the Tab key to frame the Settings button. Press "Enter".
- Press the Spacebar to check or uncheck the box. Move between the "On" and "Off" buttons using the arrow keys.
- At the end of the setting, press the "Enter" key. Next, move to the "OK" button using the "Tab" key. Press Enter again.
- down diagonally to the left - number 1
- down vertically - number 2
- down diagonally to the right - number 3
- to the left horizontally - number 4
- left click - number 5
- horizontally right - number 6
- up diagonally to the left - number 7
- up vertically - number 8
- up diagonally to the right - number 9
- Right click - +
Thanks, knew the best part. We needed a PKM.
Reply
hello! and you can help me teach my blind mom how to use the keyboard. She knows a lot and has a talking laptop (fish program). She can use Skype. prints. But she would like to learn how to find books to listen to. Many thanks.
Kharkiv, 095-19-606-02 Natalya
How to control a mouse without a mouse? A strange question, which, alas, is often encountered by users. Although it is set, it should be noted, it is illiterate. It would be more appropriate to ask how to control the cursor without a mouse.
general information
It should be noted that not many people know the answer to the question of how to operate a mouse without a mouse, without a keyboard or control. And since the first is more common than the second, the main attention will be paid to it. It doesn't matter what the cause of the technical problem is - a broken USB cable, driver problems or something else.
If there is an extended keyboard, then you can bypass the faults. Only for this you need some security. What is called an extended keyboard? Look at its right side - if there are numbers, then this is what you need. The answer to the question of how to operate a mouse without a mouse is very simple, but very few people know it.
Hotkeys
This is one of the most versatile ways to control the cursor. The combination of keys allows you not to waste time launching programs, select the necessary options and even create the illusion of the presence of additional equipment, including a mouse. So, to activate the cursor control mode using hot keys, you must press the left Alt without releasing it, hold down Shift and, without lifting your fingers, NumLock.
After that, a beep will sound, and a window will appear on the desktop, in which they will offer to enable the ability to control the pointer using the keyboard. By default, “Yes” is highlighted, that is, consent. To activate this keyboard function, you must press the enter button. To deactivate this feature, you only need to press NumLock once. It should be noted that while this feature is active, it will be impossible to enter numbers and use the keyboard expansion.
What to do then?
Those who use our advice while reading the article have probably noticed that everything seems to be done correctly - the mode is activated, but there is no result. The fact is that this is a push-type mechanism with which you can literally move pixel by pixel. And speaking about how to control the cursor without a mouse, it should be especially noted that if the pointer needs to be moved a considerable distance, then you should hold down the corresponding key.
Let's look at a small example. So, our computer boots up, and the cursor is in the center of the screen. And we need to launch the program shortcut, which is on the left. We activate the mode of using the keyboard as a mouse and hold down the number 3 under NumLock. Initially, the cursor will hardly move. But after a few seconds it will accelerate to a fairly good speed, and the shortcut can be selected.
Emulation control
We continue to consider how to operate a mouse without a mouse. We have already learned how to move the cursor. But how do you interact with something? How, for example, can you select and activate the same shortcut? The number five, located under the NumLock, helps in this. Oh yes, we forgot to say something else! Using the Shift and Ctrl keys, you can increase or decrease the cursor movement speed. If you want to change these settings, then in the lower right corner you should find the mouse sign, select it and change them with the emulation parameter in the window that opens. If you want to make a double click, then the plus button located on the same NumLock will help with this.
Other keys are also used. So, if you click on /, then the mouse emulation will switch to the left button mode. With the help of "-" we switch to the right one. If you press *, the emulation will work in the mode of both buttons. In order to hold something, you must press 0. If you need to release, then use ".". In order to know about the current state and activity of the team, you should look in the system tray. But emulation is not required in order to perform certain actions. How to operate the keyboard without a mouse? Physical equipment will help to perform certain actions even in standard mode. The only question is which ones. And is this functionality enough?
Interaction with a regular keyboard
How to control a computer without a mouse, having only buttons? To do this, you need to know what the available keys are responsible for. So, the enter button (aka Enter) successfully replaces a double click. If you need to send an object to the trash can, then deleting (Delete) will help. Use Tab to navigate between different shortcuts, documents and files. But these are the usual buttons that most people know about.
Is there anything else you need to know about? Yes, and these are combinations. If you press Win + L, the computer will be locked. The Win + E combination helps to launch the explorer. If you use Win + F, the search bar will also be displayed. Pressing Win + R opens the Run Program dialog. To switch focus to the system tray, you need to use the Win + B combination. If you want to access the context menu of the current object (or just simulate a right-click), you can use Shift + F10.
As you can see, there are quite a few different answers to the question of how to control a computer without a mouse. It should be noted that the keyboard layout does not matter. It doesn't matter if you press R in English or K in Russian, the result will be the same.
Quickly activate shortcuts
Talking about how to control a computer without a mouse, it is difficult to ignore such an interesting topic as calling a program. This is done through hot keys and shortcuts located on the desktop. First you need to open the properties dialog. After that, you need to go to the "Shortcut" tab and place the cursor in the field called "Shortcut". After that, you need to click on a certain key combination. For example, Ctrl +<буква>... If you are not sure that you will remember a large number of hot combinations, then you can go for a little trick. Initially, you need to make a splash screen on the desktop, where all the combinations will be written. And as soon as some combination gets out of your head, you can quickly find it using Win + D. As you can see, this is not very difficult.
Computers have long and firmly entered our lives. And the vast majority of users of this miracle of technology do not imagine how to control a computer without a mouse.
The mouse is so comfortable to use that we can often forget that we have it in our hand. Fans of online games even arrange competitions on the speed of control of this manipulator.
But suddenly the unexpected happened: the computer "rodent" dear to your heart stopped responding to commands and giving signs of life.
The first question: "What to do in this situation?" Naturally, you can do without toys on your computer for a couple of days.
But what if you have urgent work to do? If you need to submit a report by the end of the day? Send a business letter to a client?
If suddenly your mouse stops working, then check the connections or reinstall the drivers for it. You can read how to install drivers correctly in our article - "How to install drivers on a computer or laptop"
At first glance, the situation seems hopeless ... But only for those who do not know how to operate a computer without a mouse.
There are two ways to solve this problem: prepare for it in advance or urgently deal with the salvation of the current situation.
Let's take a closer look at each option.
Procedure for controlling the cursor without using the mouse
So, let's start studying a non-extreme option of how to control a computer without a mouse. After all, as the well-known proverb says: "forewarned is forearmed!"
To enable the ability to control the cursor on the monitor screen without using the mouse, you need to perform a number of actions:
An emergency option that allows you to control your computer without a mouse
But what if, after all, an irreplaceable manipulator “ordered to live long” at the most inopportune moment? The main thing is not to panic! You can get to the desired settings using only one keyboard.
Here is a brief algorithm of the actions performed.
And now you need to simultaneously press the combination of keys specified in the settings window. These are three keys: the left "Shift" and "Alt" and the "Num Lock" key. In the window that opens, click the "OK" button.
If the icon in the form of a crossed-out mouse appears on the taskbar, then the cursor control mode using the keyboard is enabled. You can disable this mode using the same keyboard shortcut.
Use the arrow keys on the numeric keypad to control the pointer with the keyboard.
The "Num Lock" key must be disabled (the indicator is off). Pressing the “Enter” key corresponds to a double click (click) with the left mouse button.
Now you know how to operate a computer without a mouse, taking note of these simple tips. And when such a situation arises, calmly cope with temporary difficulties. You just need to practice beforehand.
Sooner or later, but small force majeure circumstances still happen without asking our consent. The breakdown of equipment always knocks out of the working rhythm, and the failure of a small but irreplaceable tool - a computer mouse, is compared to the loss of the hand's functionality. For example, there may be a problem with computer control, and you have to decide for yourself how to work without a mouse.
Undoubtedly, something rarely breaks down in an instant, most often we can observe unpleasant signs for several days before. But the fact becomes obvious: the mouse has lost its mobility, and something needs to be done about it!
How to control the cursor without a mouse
The most important advice: go to the store and buy a new mouse.
Although there is one secret, how to get through the time before going to the store and finish the work started to the end.
If your mouse is dead, press the Shift + Left Alt + Num Lock buttons on the keyboard at the same time. You will see a window:
Press the keys, as it is written in the following figure, and such an icon will appear in the tray, indicating that you can work without a mouse.
Now the cursor can be controlled, but you need to know how:
Several secret ways: how to work without a mouse
To control the cursor, you will need to work with the numeric keypad using the number keys.
In order to work without a mouse and control the cursor, you need to press the key and hold it for the required amount of time.
Important note: if you double-click on the tray icon, then in the settings you can increase or decrease the speed of cursor movement.
I believe that having such secret information, you can successfully complete the work you started earlier on the computer, and then, in a good mood, go to the store for a new assistant - a computer mouse. Successful shopping - choose the best!
Do you use hotkeys on your keyboard? Watch an interesting video clip, after watching which, you want to learn all the keyboard shortcuts in order to work faster and more efficiently on your computer.