How to enter the Windows 10 login password

If you are tempted to enter your password every time you turn on your computer or get out of sleep, then in this article you will find a solution. It’s true that for many business owners, setting a password is not necessary, since few people save on their computer records, which are subject to the same level of secrecy as a state dungeon, and entering a password when logging into the system is a waste of time. Below we describe a number of reliable methods that will help you find a password in Windows 10. I will identify a number of ways to find a password when logging into Windows 10, and decide which one you choose - decide for yourself. I recommend looking at all the options described in this article to understand which method is most suitable and unforgettable for you.

You also need to ensure that if you are going to cancel these operations on a computer that is in your office, and in which you do not occupy a high position, then it is highly probable that the system administrator protecting you from the benefits of your system. Of course, not all administrators are so shy (depending on the beast or company regulations), but it is still your responsibility to know about this fact. If you do not have access to retrieve the password, you will have to contact your administrator and ask to retrieve the password. To change your password or get a password for another account, you will need administrator rights. Otherwise, you will not be able to keruvat with other koristuvachs. If you need to change the password for your profile, you can do it without any problems. I wrote this introduction in order to understand that you will not be able to change your current password.

Quick way to get your password

This method is the simplest and therefore this option can suit everyone. Open "Start", then "Settings":

Let's go to the section "Area records":

Once you are ready, go to “Login Options”:

In the window, select the “Password” section and press the “Change” button:

At the Change Password window, you will initially need to enter your old password. Once the password has been entered, you must press the “Next” button to go to the window where you need to enter a new password.

To get your password completely, leave the “New Password”, “Enter Password Again” and “Password Hint” rows empty, then click “Next”.

Once the password has been changed, click “Done” in the window, close all programs and restart the computer to ensure that the password can be changed to a new one. If you have done everything correctly, then after re-activating your computer you will no longer be asked to enter your password.

It is possible that some users will not be able to change their password, so Windows 10 will promptly ask you to promptly enter the password. Please read the article anyway.

Reset password via command line

You can also retrieve the password from Windows 10 through the command row. Right-click on the “Start” button and click on “Command Row (Administrator)”.

After opening it, write “net users” and press “Enter”. A list of clients will appear in this system:

Now enter the command “net user name_koristuvach” (instead of “name_koristuvach” you need to enter yours), thus setting the empty row as a password.

You no longer need to enter a password when logging in to Windows. You can close the command row and check whether you have a password or not.

Remove password through cloud records in Windows 10

Another way to enable a login password for Windows 10 is through the cloud account settings. Now let’s get started and get started in two ways:

Find the “Magnifying Glass” button in the lower left corner of the desktop next to the “Start” button and click on it. In the window we write the command “netplwiz” and click “Wincont command”.

This setup can be accessed in another way, by pressing the Win+R key on the keyboard, the Viconati window will appear. In this row we write one of two commands: “netplwiz” (launch a window with configured cloud records) or “control userpasswords2” (run the same) and press “Enter”.

Now, we have entered the parameters of cloud records. Now we select our cloud account and turn on the item “Enter your account name and password.”

IMPORTANT: If the PC is connected to a domain, this checkbox will not be available to change. In this case, you can enable the password only through the registry, as described below.

After making the change, you must press the “Freeze” button. To confirm the change, the system will prompt you to enter your old password. After entering and pressing “OK”, you can re-enable the computer – the login will be possible without a password, which is what we need.

Finding your password through the Windows 10 Registry Editor

This method is not as secure as the first one, but first of all, you need to go to work with the registry editor with special respect, and otherwise, your password is saved in this way in open view in one of the registry entries, and whatever it is, Who has singing skills and knowledge, you can marvel at him. However, as I said earlier, if you chose to turn off the password when logging into Windows 10, you are unlikely to protect your computer from unauthorized access.

Now, let’s launch the registry editor right away. You can do this immediately: press the “Win” + “R” button and in the window that opens, write the “regedit” command in the row, then press “Enter.”

The “holy of holies” of Windows opens - the registry, which parameter can be changed here, otherwise changing the system may have a fatal effect on the operation of the system, if you perform the wrong actions. Before changing the registry, you need to approach it with special care and especially in the way that you know what you are doing. I will describe this method as accurately as possible and nothing will happen to your system.

We need to know the item "HKEY_LOCAL_MACHINE" - "Software" - "Microsoft" - "Windows NT" - "CurrentVersion" - "Winlogon". To enable Windows login to work automatically without a password, you need to know the AutoAdminLogon value, open this parameter (by double-clicking the left mouse button) and change this parameter to “1”.

Next, change the DefaultDomainName value to correspond to the domain name or local computer (to recognize them, you must right-click on “This computer” and click “Authorities” in the menu). If you do not see such a value in the registry, you will need to add it: right-click the mouse on an empty seat, select “Create” - “Row parameter”.

Now create a new parameter ("Create" - "Random parameter", above I will show a screenshot of how to create it) DefaultPassword, open it and enter the empty password in the field.

Enter the password before exiting sleep mode

Entering the password immediately after waking up/sleeping your computer or laptop is a must. Perhaps, through this you want to retrieve the password from Windows 10. The system is configured to enable password verification. For which you need to go to the parameters (for the date, click on the notification icon and then select “All parameters”):

Another option is how to enable the password when the PC is “awakened”: you must go to the “Control Panel”, open the “Electrical Life” item. Find someone's electrical circuit that is currently being tested, and click “Adjusting electrical circuits.”

Next, in the window, click “Change additional life settings” (located at the bottom). Next, find the option “Remove password entry at wake-up time”, in which case change the values ​​to “None” and to save changes, click “Freeze”.

I can’t understand the importance of passwords. The password is necessary if there are children on your computer who can delete important files, for example, a file from the desktop with the words “It’s important not to delete” or “My call for this month.” If you have a password, then your household simply cannot delete such files. Another important point that I want to remember is that viruses are even more “loving” if there are no passwords on your computer or laptop. In this way they can perform all necessary activities on your computer. Of course, remember that your profile is not an administrator, but a primary user who does not have the rights to edit important system files or other important directories in the system.

Every day, more and more PC owners are switching to Windows 10. People started calling for it, and it has become fashionable. For tens of years, Windows is simply teeming with shortcomings. Ale, it’s not good to forget about these obvious and important achievements. Before the rest, you can add a certain amount of curiosity to the Swedish woman. Turning on Windows was even faster without entering a password.

Of course, a password is very necessary if you want to protect information from third parties. Ale, if only you sit at the computer, then, behind the great rack, you don’t need wine. Moreover, the gradual introduction of a secret combination is planned. Today I will teach you how to retrieve your password when logging into Windows 10.

Don’t forget about troubles

Before you learn and can retrieve your login password for Windows 10, think about what you need to do. Once all files become available to any user who sits down at your computer.

It’s not easy to tidy up the password, because:

• It is important to save important information while other family members use the computer, especially children or young adults.
• You need to take your computer to a service center for repair.
• You would prefer to rely on anti-virus programs (some types of Trojans realize their potential “to the fullest” only under passwordless accounts with administrative rights).

If you wanted to get a password when logging into Windows 10, then we will tell you about three simple ways to get it.

We enable the password through the “Account records of the account manager”

In order to launch the snap-in, you need to click on the "Viconty" utility. The key combination Win + r will help us. After the "Viconty" window appears, you need to enter the "netplwiz" command in the data entry field and press "OK".

After this, the window “Cloud records of accountants” will open. Click on your account account and select the checkbox next to “Enter your name and password.” To save adjustments, press “ok”.

In the new window, you will again confirm your intention to enter a password when logging in.

We restart the system to ensure that the procedure was carried out correctly. When the OS starts up again, you will not be able to enter the password to log into the system.

Resetting the password.

This method does not accept the password entry form from the authorization window, but, after this is completed, logging in to the local administrator account will be available after pressing the “Enter” key.

Let's go to zero:

Open the Start menu and launch the Settings add-on.

Now you need to go to the “Cloud records” section.

Open the “Login Options” section and under “Password” click the “Change” button.

Now, to confirm your actions, enter the exact OS password in the password field.

At the window that opens next, fill in the first and second fields with blanks. The remaining time is to enter a hint for a new, “empty” password.

After careful adjustment, we restart the system to verify the results of the new work.

The password can be enabled through the registry.

This method of enabling a password through the registry, a little folded behind the front, but it’s all the same, you don’t have to click the folding button. The smut is going to go away, as I say.

This method needs to be used especially in the case that equipping the server with a cloud record does not work for any reason.

Once again we remember that it is necessary to follow the plan that I will describe to you. Even all changes in the registry indicate that Windows is running properly. “By burning in the wrong place,” you will immediately destroy the integrity of the OS and Windows will have to be interrupted.

To begin this procedure, you need to open the “Vicont” window to open the registry editor. In the field for entering “open”, enter “regedit” and press “ok”.

You will create a vino, divided into two parts. On the left side you need to go through the next path "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon".

In the list of parameters on the right half, find AutoAdminLogon. Click on it with the right mouse button and select “Change” from the menu.

In the “Values” field, at the end of changing the parameter, put one (replacing zero) and save the adjustment.

You can verify that the procedure was completed successfully after rebooting the computer. If you have an updated OS, you no longer open the window for entering a password, but only open the desktop, then you are well done and entered everything correctly.

If you are unsure about your PC and are afraid to go into the registry on your own, you can quickly use one of the ready-made solutions: a console command or a reg file. We decided to cancel one and the same action: change the value of “AutoAdminLogon” from 0 to 1.

How can I enable password protection in a Microsoft account?

Since a Microsoft cloud account is also required to purchase various features from the Windows Store, to synchronize data between devices and to access the management of cloud records through the corporation's website, you must use a password. So you can activate Windows through the cloud itself. So it’s impossible to tidy up.

If you enter a password when logging into the OS under Microsoft, it is a great advantage that the corporation recommends replacing it with a PIN code (numeric device identifier) ​​or a graphic password. It will make you more comfortable.

Have you set a password to log into the system, and now the operating system recognizes your entry when you turn on the computer or when you switch from sleep/sleep? No problem. This can be easily corrected without losing the password for the account.

You can get your Windows 10 login password in a number of ways:

• applet of the control panel, the titles “Oblikovi records koristuvachiv”, as it was in XP and “simtsi”;
• system registry editor, which allows you to configure almost any Windows parameters;
• The remaining Control Panel applet, called “Power Life,” will allow you to promptly enter a password when the computer wakes up.

It is important that in order to edit the following algorithms, the registry records are subject to either administrative or administrative privileges in the system, otherwise access to such registry records will not be denied. The required parameters are saved on your own. Also, at the end of the article, a short video is posted that demonstrates the activation of entering a password for an additional applet of cloud accounts of account users, and it is better to read it once rather than read it many times.

We select the form for entering a password using an additional applet on the Internet panel, which confirms the setup of cloud records

This method is considered first for several reasons:

• we will forgive and use a quick method of reaching the mark;
• The activities required to remove the password window are virtually identical to those required to complete in Windows 7 and XP.

It’s all too easy to learn, and it’s easy for a newbie to get stuck in a job without any food.

1. Click on the command interpreter using the Win+R key combination.

The Win or Windows key is mainly located between Ctrl and Shift. Its significance is the presence of Windows icons - a visually visible sign, divided into several windows.

2. Enter the Netplwiz command.

Before speaking, to simplify the task, the given command can be entered in the sound row - the result will be identical - a window will appear with the name “Oblique records of correspondents”.

3. Select the icon that stands opposite the single option “Enter a password for the account user name” in the first tab of the dialog box.

If there are a number of account records in the system, select the required account record from the list below, and then change the order for the selected account.

4. Press “Save” to save your changes and close at the end by pressing “OK”. After that you will have to enter the exact password and confirm it.

When you enter and confirm your password, you can select a different account under which Windows will start.

Unfortunately, if the PC is connected to a domain, the option until you enter a password will be inactive. I would like to get out of this situation by directly editing system registry entries through the editor.

Below the descriptions, the method is less safe for beginners, so be extremely careful. It is also recommended to create a backup copy of the replacement head or create a Windows 10 folder.

You are prompted to enter a password for additional direct editing of registry entries

Another way to accomplish everything described above is to use the capabilities of the registry editor. Only in this case, the password is stored in one of the registry keys in an unencrypted form, so any additional user can recognize it without any problems.

1. We love the registry editor.

Try this with the "regedit" command. Look at the search row in the Win+R command interpreter row.

2. Melt instead of HKLM milk.

3. Go to the address Software Microsoft Windows NT CurrentVersion.

4. Go to the Winlogon account.

To activate automatic login to the system, click the step.

5. Click next to the AutoAdminLogon parameter and set its value to 1.

6. The value of the “DefaultDomainName” key is indicated by the name of the computer (which is not visible to the authorities of the system).

If the key is missing, the row parameter is created from the guessed names and values.

7. We change the value of “DefaultUserName” to the name of the account manager, from whom automatic login to the system will occur, for consumption.

8. Add a row parameter under the name “DefaultPassword”, the value of which will be the password for the designated account entry.

9. Now we close the registry editor and restart the operating system. If everything is done correctly, Windows 10 will stop automatically logging in to the system.

We remove the window from entering a password at the hour when the computer wakes up

As soon as you wake up your computer or laptop, which has been put into deep sleep mode, you will also need to enter a password for authorization. It’s easy to understand, even though retailers have added the “Options” menu option.

1. Click on the system parameters window “Parameters”.
2. Go to the “Account records” tab.
3. Let's go to the "Login Options" section.
4. In the “Login required” section, select “None”.

After the laptop/computer wakes up, it does not require a password, and the account entry will be entered automatically.

I for diversity. There is another way to automate the login to the system after waking up the computer.

1. To implement this, click on the “Electrical Life” applet.

2. For active life schemes, we move on to the instructions “Adjusting schemes...”.

3. Click on “Change advanced life settings”.

4. In the additional parameters window, follow the instructions “Change settings that are not available.”

5. The values ​​of the “Enter a password...” parameter are set to “None”.

6. Save your new settings by pressing “Set”.

Enable password for local cloud storage in Windows 10

When working from a local account, the shortest solutions will remove the account password.

1. Using the additional Win+X menu, launch the system console with administrator privileges.
2. Enter the "net users" command.
3. Enter net users account_name "".
4. Embossed "Enter".

The password for the specified Windows 10 account has been removed.

As I continued to unravel the mysteries of the Windows 10 operating system, I learned about the problem of hackers. Some people cannot enter the password that the Windows 10 operating system asks us to immediately when logging into it or when exiting hibernation mode. Having finished a bit, I decided to write this article and explain to my readers what’s up.

And so, in the Windows 10 operating system there can be two cloud records: either a local record or a Microsoft cloud record. If you have a local one, you can safely start disabling the password right away, if Microsoft - you will first need to transfer it to local, and then disable it. If you don’t understand what the language is about, then read the article, and then start practicing.

Local cloud record- If you especially come up with a login and password, you will be victorious when logging into the system.

Microsoft cloud record– use your registration data on the Microsoft website, where your email address is identified as a login.

In the list of cloud records

And so it begins. We press the next key Win + R and at the end we write netplwiz, stamped “OK”

At the window that has opened, at the “Koristuvachi” tab, we select the bird opposite the point “Window to enter the username and password”. Printed "OK"

It’s not enough to read about this idea, but let’s move on from any incident. Press the “Start” button and select “Settings”

In the window you click on the tab "Cloud records"

If this is not the case for you, turn on cloud information from Microsoft by clicking the “Enable” button. In the window to switch to local, you enter your password and account name. Further emboss "Log out", after which the system will be transferred to the local cloud.

Via login parameters

We take the password from the section "Login parameters". Write to us here that whenever we are active, the system may request a re-login within an hour. For this item, select the value “None” from the list (this means that the operating system will no longer prompt us for a password when exiting hibernation mode). And under the “Password” item, press the “Change” button.

Enter your current password and emboss it on the “Next” button:

Finally, all fields will be left blank, which means that we will no longer have a common password:

So there you go, we are separated "Login parameters" Now write that our image does not have a password.

Where can we end, although there is another way to enable a password through the registry, otherwise I don’t recommend messing with it, because you can change the wrong parameters and values ​​and get hurt.

And also amazing video on the topic:

You must enable a password when logging in. The Windows 10 operating system requires you to enter a password into your Microsoft cloud account when your computer is turned on and logged in, which also supports your users. Especially if the password is complicated and the user cannot enter it from memory.

If you are also faced with a similar problem, this article is obliged to help you. You will now find out how to enable the login password for Windows 10.

Krok No. 1. We are calling the Netplwiz team.

In order to enable the password when logging into Windows 10, you need to log out the Netplwiz command. You can earn money in a number of ways. For example, you can open the “Windows” window using the Windows + R key combination and enter the “netplwiz” command.

You can also make a quick joke by asking. To do this, open the “Start” menu and enter “netplwiz” in search. After this, the system will send you a quit command.

Lesson No. 2. Enable password at login time to Windows 10.

After entering the "netplwiz" command, a window may appear on the screen under the name "Account Accounts" or "User Accounts" if you have an English version of Windows 10. In which window you need to enable the function Click "Enter your username and password" and click on "Ok" button.

Croc No. 3. We confirm that the password has been enabled.

After pressing the “Ok” button, the operating system will promptly confirm the password entry. Enter the exact password for the client and click the “OK” button.

When you enter the password before logging in, you can complete it. Now, if the computer is locked, the system will not prompt you to enter a password. Hello, the password will be required when exiting hibernation mode. To enter the password when exiting hibernation mode, select option number 4.

Lesson No. 4. The password is turned on when exiting hibernation mode.

If you have Windows 10 without update, then in order to enable the password when exiting sleep mode, you need to right-click the mouse on the “Start” button and select the “Electrical control” item.

You can also open the “Electrical Control” window for additional search in the “Start” menu. For this purpose, enter the title “Electric life”.

At the wake-up window, residents need to go to the section “Remembering the password before waking up”. The instructions for this section can be found on the left side menu. If you do not have a section called “Restore password at wake-up time,” you may have a section called “Life button action” where the same settings are available.

After this, you need to turn on the “Do not forget password” function and save settings by clicking on the “Save changes” button.

After these clumsy manipulations, the password will be lost when logging in to Windows 10. Now the operating system does not require entering a password after turning on or exiting hibernation mode.

If you have installed the latest updates for Windows 10, then you will not have more detailed descriptions in the “Electrical Life” section. Your device will need to select the "Options" menu. To do this, open “START”, go to “Settings” and find the section “Area records - Login options”. Which section has an option called “Required Input”, you need to transfer it to the “Numbers” stage. After this, the system will enable the login password for Windows 10.

If you have Windows 10 Professional or Windows 10 Enterprise, you can also quickly access the Group Policy Editor. To do this, open the command “gpedit.msc” and in the window that appears, go to the section “Computer Configuration - Administrative Templates - System - Power Management - Sleep Settings”. In this section, you need to enable two functions that prevent you from entering a password when exiting sleep mode (indicated in the screenshot below).

I repeat once again that the Group Policy Editor (gpedit.msc) is only available for Windows 10 Professional or Windows 10 Enterprise. If you have Windows 10 Home, you can turn on password retrieval when exiting sleep mode only through the Settings menu.