Making a case for a touchscreen mobile phone. DIY phone case made from fabric for various models DIY phone case from paper

Beautiful cases are so popular, but sometimes you don’t have enough money to buy a good phone case. To look original and stylish, you can make your own phone case from fabric. There are countless master classes on this topic on the Internet. Anyone who wants to create such an original product can do so.

Stylish zahist

How can you make such a fool? One of the simplest ways to prepare such a protection for your phone is with a sock. This type of cover would be unique and it would be impossible to find a similar one.

In order to make such a cover, you need to take:

• a pretty little shkarpetka with bright farbs and white ribs;
• head with threads;
• sample;
• felt in two colors;
• adhesive stitch;
• knives;
• hairpins;
• floss for embroidery;
• beads.

In order to sew a cover from scratches, you first need to measure your phone. Write down the width and dovzhin phone. After the images, you need to paint a pattern on the paper of your new cover.

After this, you need to cut the gum in the wearable and apply the fabric template, apply the silhouette of the cover with a cut and cut the sewing, if you need to remember, then add one centimeter to the allowance.

After that, we place the wearing part on a hard surface and make a vertical cut of 4 centimeters. After this, you need to open up the two halves of the sock and fold them there, apart, into jerseys. Leave the mouth of the river. Now the ribs and the hair need to be sewn on.

Bring back respect. The smut, so that the horizontal line that passes through the ears, is even.

Once the robot is finished with the ears, it is necessary to move on to the face. For this purpose, look at the paper colo, with a radius of 4 centimeters. Then apply this form to a white material and rub it off. After this, you need to take a blank cover and sew it from the sides, without burning the top part. You need to sew it on the turning side. Then turn out and straighten all the seams. After this, it is necessary to take a white round and begin to join it with threads until the sheath. Using loose stitches, go over the edge of the white fabric. It’s better to wear threads that match the color of your clothes. If the muzzle is sewn, then we sew on a bead. This can be done with a nose, and you need to embroider ears and eyes from a floss thread.

Next, in order to create a lining for the cover, you need to take felt of any color and cut from the same fabric a rectangle that matches the size of the cover. This rectangle is folded over and sewn from the bottom and side. The ready-made form for lining is inserted into the case, unnecessary parts are cut out and the edges are carefully tanned. Then, using small stitches, we sew two parts of the fabric.

Denim accessory

Another option for a phone case can be made from denim fabric. This model is very visible.

To sew such a cover, you need to take:

1. Denim fabric, which can be old jeans;
2. Lining fabric;
3. Plastic dance;
4. Necked threads, knives;
5. Small magnet;
6. Metal plate.

Hide robots

Phone, for which you need to sew a cover, attach it to the fabric and shape the silhouette, do not forget about the allowances, the same manipulation must be done with a fabric lining. After which it is determined by seeing the line. Then we sew the lining fabric from the main fabric. We take a plastic flap and cut a stitch from it, so we need to increase the width between the stitches of the workpiece, and the dozhina is two centimeters shorter.

After this, it is necessary to sew a fabric jacket that will serve as a strap. The color and fabric can be selected independently. The length of such a stitch may be 4 centimeters larger than the phone. This strap needs to be sewn to the plastic at a distance of 4 centimeters from the top edge.

After which the part made of material must be turned out, and the bag will come out. Then you need to place the plastic on the side of the lining and mark the slot for the strap. It is important to trim the cut; this can be done by hand with careful stitches. Then insert the plastic into the bag and pull the strap out from the opening. Now you need to cut out three balls from the other side. For what purpose is it better to use a stationery bottom and stitch the edges.

All I had left was to sew a cover all by myself. Once completed, you can glue some rhinestones, sew on a patch, and beads. Pozhlivo, vibrati be-yaky cover chi decor virobu, marvel at the photo.

You see the books

How to make a book case with your own hands? The phone case for the book looks very handy. You can also put both headphones and a card in such a book.

In order to make such a cover, you need to take the main and lining fabric, a hemstitch and a thick braid, a lace, two tails, threads with a thread, and scissors.

The form works like this: the phone is applied to the paper and is placed along the contour, with a margin of one centimeter. Cut out the crimp and transfer it to a double-folded fabric, then cut it. Perform the same manipulation with lining fabric. We sew two fabric parts at once. At the top of the left hand it is 5 centimeters, and from here it drops to 7.5. Sew a thick braid on the top part, and a lace on the side like eyelets. After this it is necessary to sew on the sauerkraut. For this purpose, take the main fabric, the width of the workpiece, and the height is 3 centimeters less. Use a seam to separate the two jellyfish in the middle.

Sew the mesh stitch to the base of the gut. On the front part of the cover, sew a small hook for the cord loop, and on the inside for another loop - a larger one. Having inherited such a master class, you can also get a protective case for your phone. For cobs, sewing such a virus is not difficult at all.

Video on statistics

This article contains a video tutorial on how to make a fabric phone case yourself.

We will carry out a number of master classes from the production of silicone, felt, knitted, skin covers, as well as amazing bumpers with a herbarium and children's scarpets.

Case-herbarium

To make such a smartphone case with your own hands, prepare:

For the cob, think about the composition, applying flowers in different variations to the surface of the casing. How only “the same” ones will be found when taking on the job:

1. Take a photo of the perfect arrangement to tap into your creativity.
2. Try to stick large and light details first, and finer and darker details - under the action of resin, the growths will fade and become clear. By the end, squeal the sparkles. Do not go overboard with the details - the ball is not too thick, but is 1.5 mm thick.
3. Following the instructions, dilute the resin with water one to one.
4. Carefully pour the rosemary into the center. Then spread it over the entire surface of the painting, scooping up the bulbs.
5. Be careful to ensure that the resin does not spill over the surface of the composition - immediately wipe it off with cotton swabs soaked in acetone.
6. The kit for the smartphone will be ready in two years.

Silicone case

You can make silicone cases for your smartphone yourself with help:

Before you make a case for your smartphone with your own hands, loosen your gum mittens.

1. Mix 50 g of potato starch with approximately the same amount of sealant. Then knead this product to the consistency of plasticine, adding the barn so that the colors are equal.
2. Rock the ball with a rocking chair or dance on a level surface until required.
3. Seal the entire opening with tape, then place it in the center of the crust, pressing a little bit into it.
4. Then, using a spatula, bend the edges, stitching behind it, so that the “mline” fits perfectly to the smartphone.
5. Be prepared for the phone to lie in a “full” mass for 12 years before delivery - as much water is required to catch it.
6. Having removed the phone, first remove the lock on the front part, then open the openings for the camera, charger, and headphones - they are to blame.

Cover from all over

A permanent case for a smartphone with your own hands and frantic for help:

I for the visibility of the sewing machine:

1. There are two new straight cutters - the outer side and the inner side. It is necessary to adjust the length, width and fit of the garment, as well as an allowance of 5 mm on the skin and sides at the seams.
2. On the other side, one cut is cut diagonally, so that the next one becomes a handy intestine.
3. Then place one piece on top of the other (the outer intestine), fold it behind the phone shape and stitch, extending 4 mm from the edge.
4. It doesn't sag completely, so it's not too hard to fray the edges. Decorate your basket with your own applique or patch - a universal case for your smartphone creations!

Case-book for smartphone

For what purpose does one need:

• skin or skin;
• a thin piece of plastic;
• universal glue;
• two flat magnets;
• awl, knife, knives.

A skinny case for a smartphone in the “book” format goes like this:

1. Make 2 pieces of plastic in the exact shape of a phone, and make a hole for the camera on one of them.
2. Glue a magnet to the “back” plastic at the desired location.
3. Glue the offending parts of the plastic onto the skin, removing the space between them, which is an old gadget.
4. Tan the skin so that the plastic is completely sealed in the middle, glue in the required places.
5. With the strip of skin, sunk in another magnet, form a zipper and carefully glue it to the front part.
6. Do not forget to make the necessary slits in the skin for the camera and other necessary openings.
7. Using double-sided tape, glue the accessory to the cover.

Knitted cover

You can make a “quiet” case for a smartphone with your own hands using yarn, and knit it yourself. You don't need a lot of materials:

There are two ways to vikorize here:

1. The simplest and most advanced. Knit two new fabrics with your favorite stitch and sew them. Cast on the loops to the width of the smartphone and then knit the stitches. You can pick up stitches using the same stitch and knit the same width.
2. Knitting has “one purpose” - just like knitting scraps. Cast on stitches of two phone widths, and then divide into four needles. Continue knitting behind the closed pattern, vikorista and without facial loops, until the virus is not compatible with the smartphone.

You can associate this kind of violence with a hack, with a doctor, or with the first method.

Cover for children's shkarpetki

Go to the stores or buy cute, original baby scarves through the online market. You can easily make a case for your smartphone with your own hands. You will also need scissors, a neck with thread, carved accessories for appliqué to your taste - tins, pendants, stitches, rhinestones, etc.

1. Clean the areas of the heels, soles of the feet and toes so that the part that is lost has a small straight outline.
2. Sew up the open bottom.
3. The fabric that was left uncut, as it was necessary to cover the top of the foot, turn it up, sew it on the sides - this will be the intestine.
4. Decorate the fabric with the trimmings you have prepared - sew or carefully glue them to your desired scarf cover.

Without a cover, our phone feels very uncomfortable - you’ll be surprised at how quickly it gets dirty or let it go. Of course, there are phone models currently on sale that are not afraid of smudges or other damage. But they are not accessible to everyone, and it is more acceptable for them to give themselves or loved ones gifts, creations with their own hands. In this master class we know how to sew a phone case with your own hands.

Required materials and tools:

• thick fabric for the main, front and rear parts of the exterior;
• thick fabric for accent;
• lining fabric;
• twill stitch;
• Velcro;
• metal or plastic ring;
• bliskavka;
• threads;
• line of sight;
• kreida;
• praska ta prasuvalna doshka;
• knives;
• roulette;
• kravetske prladdya;
• sewing machine.

We show the details of the cover

Today we learn how to sew a phone case with your own hands. First of all, download and unpack the template here. Show details along the entire lines. From the fabric for the main, front and back parts of the exterior, the following details are cut: one rectangular piece measuring 12x19 cm. Create one vikorist cover template. The fabric for the front part and the accent features a pouch. For the lining fabric, you need to cut two rectangles measuring 12x19 cm. The twill stitch cuts 22 cm. The Velcro stitch is 2.5 cm wide. Sew one Velcro to the front side of one outer edge waist

Sew on a stitch

Fold one piece of lining with the twisted sides at the same time over the Velcro piece so that the Velcro ends at the fold. Find the middle of the lining and draw a line. Attach a twill stitch to this line. Insert the metal ring. Sew on a sewing machine. Sew the stitch crosswise, as shown in the photo.

We sew on the embroidery

Find two cut parts or match them using a different template. Bend the edges of the leather part by 0.5 cm and sand with sand. Take the sparkler and place it between the two parts. Sew on a sewing machine. Find the piece of lining that is missing and fold its side at the same time as the front piece. Open the staple and stitch along both sides and along the bottom edge.

We sew the details

On the front and back parts, fold up the top edge and stitch on a sewing machine. Place the two main parts right sides together. Using a sewing machine, sew along three sides and finish the edges with a zigzag stitch. Trim the seam allowances at the bottom edge. Turn to the front side. Sew again along the top edge, burying the metal ring. Ready! This is how you learned how to sew a phone case.

The salons now have a great selection of covers for phones and smartphones. But when you start pranking your own case, you often run into the problem of having little choice for your own model. Either it’s the wrong format or the boring, standard color. For which we have selected a number of master classes for you, so that you can make a cover with your own hands using the tools at hand. Even the skin owner of a smartphone wants to be unique and make it beautiful, let’s brighten it up and make it special. So let's marvel at the number of options for covers that you can create at home.

Cover from paper

The simplest and most budget-friendly option is to buy a paper case. Its folding does not take a lot of time, it is completed with simple origami technology. Such a case will obviously not last for a long time, unless you absolutely need a cover, this option will become excellent. Let's get acquainted with the step-by-step instructions.

You will need:

1. Arkush paper A4
2. PVA glue

Robot head:

1. Place the paper in a horizontal position on your phone.
2. Now light up the phone until the end of the paper.
3. Light the lower part several times until the place where the telephone is located.
4. Now, to make the trim more beautiful, bend the knitted pieces until they burn in the lower part of the cover.
5. If you need a special design, use glue to seal the edges and sticks. Our paper cover is ready.

Video case with paper

Cover made from gumok

The phone has a very original looking phone in a case with gum. Such a case will last you time and patience, but the result will please you and delight those you know and those you don’t know. We prepared step-by-step instructions with a breakdown on the iPhone 5, but for other smartphones you simply need to take a different number of fingers. Now, it’s time to finish the battle with your own hands little by little.

You will need:

• Gummies of 3 colors - 500 pcs.
• Gachok
• Verstat for wickerwork

Robot head:

1. There are 2 rows on the layout. Open the top row of the guilty party to the left, and the bottom to the right.
2. We begin to pull on the rubber bands from the top row of another stitch, from this on the cross we push onto the 3rd bottom row.
3. Next, cross to cross is pulled from the 2nd bottom row to the 3rd stitch of the top row.
4. So I’ll just timidly step on the beast from the 3rd pin on the lower 4th. And then from the lower 3rd to the upper 4th.
5. There may be 3 such crosses.
6. Skip 2 stitches in the center and continue weaving 4 more such crosses. On this side there are 4 crosses that move one after another.
7. Along the edges of the verstat there may be 2 vertical lines.
8. The front row is covered with elastic bands on the top and bottom lines so that it can stand flat.
9. This is how it is applied to all the steps of the previous row.
10. Turn the bench vertically towards you so that the upper points point at you with their heads.
11. The first gum is pressed without creasing onto one upper or one lower part.
12. Other gummies are firmly, without creasing, along the top row, one by one. In this row we do not miss the two middle lines.
13. The bottom row is done in the same way, joining from the other side with a rubber band, just like we started the row. Come out, we walked along the stake one row.
14. Starting from the bottom row, from the skin stitch, behind the additional hook, we remove two gummies, which are located at the very bottom. The middle lines are skipped. In this way, at the end of the day you may end up with two gummies on your skin.
15. The next row is done in the same way as the 3rd row, one rubber band behind the other. For this row we take rubber bands of a different color.
16. Further along the stake we remove the bottom 2 loops.
17. We put on the rubber bands again, vikoryst or another color, and then we take off the bottom loops.
18. So just two rows of cherguyuchi colors. One row - tighten the loops once, and then remove them.
19. The opening to the screen begins to work. Turn the bench vertically, the left row of bagnets is to blame for being turned towards you.
20. We start walking in the left lane. On the 3rd step, we remove the bottom rubber and put it on the 4th step. In this manner, the remaining loop must spread to the 7th point.
21. Now from the middle 5 pins we remove the loop that was lost. On the sides you may lose 3 shtiri with frozen gums.
22. The next row of steps is carried out in the most basic way (a gum behind a rubber band). Robimo is behind the year-old arrow, starting from the 3rd working point. Five stitches on one side are still not working.
23. We need to remove the bottom elastic bands; 2 loops may be lost on the pins.
24. So we just need to knit 11 more rows. Don't forget cherguvati colori.
25. Then we knit the row behind the year arrow, now we will remember all the lines.
26. We remove the bottom elastic bands from the stitches. It is not clear from five years ago that there were no activities in this row.
27. In some places there are stitches that are not knitted, we skip two stitches and from the third we take the lowest loop and put it on the next stitch. So timidly, devoid of 2 remaining free.
28. Now knit one row.
29. Take the bench vertically and from the right row, from another working pin, remove the bottom loop and push it onto the step bagnet.
30. The remaining loop is draped over the 4th working stitch.
31. Now from the 3rd and 2nd we remove the lower loops.
32. Then we tighten the loops along the stake, leaving our 2 loose ones. Then remove the bottom loops.
33. Rubber bands are placed on the next row, covering all the lines. We remove the loops in the usual way, without rubbing more than two stitches, where there are 2 gums in total.
34. On the first step, we change the top and bottom loops in places and transfer the top one to the next step, connecting our structure. From the two step stitches, one lower loop is removed and transferred to the step stitch.
35. Next we knit the series in the most basic way.
36. Let's begin to close our cover. Robomo a row of yak on the very cob from the crosses, not letting the water through.
37. The offensive row is carefully crossed with crosses between the protimal stitches.
38. Then we begin to remove the lower loops, removing only the rubber bands from which the straps were broken. On the skin, 3 loops may be lost.
39. Now the lower loop of the skin stitch is transferred to the stepping one.
40. The offensive row is also timid.
41. On the right side, using an additional rubber band, carefully remove the cover from the surface.
42. Now straighten the loops to wash, and you’re done with the knot. Now you can quickly use such an original cover.

Video on how to make a case for your phone with a rubber band

Bumper cover made from hot glue

With the help of a gun and hot glue, you can make a protective case-bumper for your phone. It looks even more beautiful and unsound. And its originality lies only in your imagination. Such a cover can be openwork or simply with a smooth surface and tiny details.

You will need:

• Glue gun
• Nail polish
• Parchment papier
• Scotch

Robot head:

1. Cover the phone with parchment paper so that the back and side panels of the phone are without sticks. Secure the sticks in the area of ​​the screen with additional tape.
2. Identify the location where the buttons, camera and sockets are located.
3. Now use hot glue to go along the sides of the phone, and see the marked place along the contour.
4. Create a curl shape on the back panel of the phone so that it connects with the side panel.
5. Seal when everything is dry and apply nail polish in a rich color.
6. Now you can put a protective case on your phone.
7. If you don’t know what kind of training you can earn quickly with Master Class video.

Phone case in bag

A very simple way to make a case for your phone with your own hands is to use the original bag. Such a case will not protect you from impacts, but will also help keep your smartphone dry. Let's watch the instructions with photos and video descriptions on how to make a case for your phone from a bag.

You will need:

• I'll shake the bag

Robot head:

1. Inflate the bag, don’t tie it.
2. Place the phone on top of the bag with the screen facing up.
3. Now press the phone against the bag and blow it up step by step.
4. If there is not enough wind left, release the bag and continue pressing the phone.
5. The bag is tight around the phone and the case is ready. You can also take a bag with a little face or a little one, then your phone will become original.

Phone case

The cover-book is available in additional vitrats, then you yourself can choose the color and shape of such a cover. It is possible for your smartphone or phone to be stolen due to damage, as it is difficult to see when it is closed. The shape of such a cover has a special charm, even the lining can suit any little one.

You will need:

• Notepad the size of a phone with a rubber pad
• Stationery Nizh
• Line
• Olivets
• Vuzka gumka
• Cardboard

Robot head:

1. Use a knife to trim the notebook's leaves and other parts.
2. Divide one side in half and christen it with an olive.
3. Cut with a knife along the line to the outermost fiber of the cover.
4. Now here it is necessary to cut the smudge with a width of approximately 0.5 cm, so that later it will be easy to work here.
5. Reliably glue the inner sides of the covering with glue.
6. Circle the shape for the inner part of the cover along the contour of the lining on felt.
7. Place our felt piece on the inner part of the lining and cut the felt along the edge.
8. Glue the blank from the felt to the lining.
9. Place the phone on the cardboard arch and move along the line. Glue it to the felt and shape it, extending up to 1 cm from the cardboard.
10. Cut the felt into balls with two cuts from the skin side so that you can bend it. Glue the bundles.
11. Glue two rubber bands across this blank so that you can then secure the phone.
12. Glue the blank onto the outer half that is bending.
13. Now our cover is ready for the vikoristan.

Cardboard cover

The cardboard cover does not require additional stains, and relies on improvised means, which is practical for the skin. The cover has a neat and attractive appearance. Now let's get started with the video game with step-by-step instructions.

You will need:

• Arkoush cardboard
• Knifes
• Gumka
• Marker

Robot head:

1. Paint two phone numbers on cardboard with a gap of 0.5 div between them.
2. Follow the contour.
3. Make two folds with lines in the center of the workpiece, the cover is practically ready.
4. Now glue one side of the case to the back cover of the phone.
5. Once the cover is closed, you can put a thin cotton cloth on it or make an opening in the sides of the cover and attach a stitch or a skein.

Phone case with felt

This case has a great modern look, its shape reminds you of the gut you want your phone in. To make a felt phone case you don’t need any special skills, just a little imagination and some basic materials. You can find out the step-by-step instructions in the description below.

You will need:

• Felt in different colors
• Knifes
• Line
• Golka
• Threads
• Glue gun

Robot head:

1. Place the phone on the felt and, extending approximately 1 cm from the edge of the phone, trace an outline. We need 2 of these prepared.
2. Sew the offending pieces at once using the outside seam.
3. Now you need to create some decoration for the cover. Visible from different colors are the painted balls with the appearance of specks.
4. In the same way, we see a little booth made of felt, and finally the door is made of a new one.
5. Using a glue gun, attach the box to the bottom of the cover.
6. Now, use dotted threads to thread the threads for the bags.
7. Glue the balls over the threads with overlapping balls to create the most voluminous stitch.
8. Wonderful cover on the theme of the cartoon "Uphill" is ready!

Fabric cover

Using fabric, you can also make a wonderful phone case with your own hands. This case is perfect for fans of the cartoon SpongeBob. It’s great and original, it’ll please anyone. Let's see how to make such a case at home with simple photos and video instructions.

You will need:

• No matter how thick the fabric is (prettier than felt)
• Acrylic fabric
• Hollow threads
• Knifes
• Color paper
• Stencil

Robot head:

1. Stencil two new blanks the size of a phone with jagged edges.
2. Paint SpongeBob's face on one of the blanks.
3. Using colored paper, create the blanks for the pants and glue them onto the blank with a muzzle.
4. Now sew the two halves together and turn them back.
5. The cover is ready!

Video on how to make a fabric cover with your own hands

Cover with skins

Another option for a phone case can be created from your skin. It’s not a hassle to go and buy hides to the store; all you have to do is find an old hide and buy some leather for it. Such a cover is reliable and looks clear, and no one will guess that you haven’t bathed it.

You will need:

• A piece of skin
• Zatiskachi
• Knifes
• Cardboard template
• Tovsta thread
• Tsiganska golka – 2 pcs.
• Pliers for inserting eyelets
• Pen
• Decorative thread
• Egleti - 2 pcs.

Robot head:

1. To get started, check your phone settings. Add 1 cm to the top, and 2 cm to the width.
2. Find 2 parts in the size needed for your phone, adding more inches.
3. Round the corners of two pieces by placing one piece on top of the other.
4. On a template made of cardboard, make small round openings on one side, about 5 mm apart.
5. Place the template on the folded workpiece from the skin (the parts are folded with the inner side one to the other) and open the openings using pliers on the side and bottom sides. Fix the template with clamps.
6. Pull 2 ​​heads onto the thread from both sides.
7. Let's start sewing from the side.
8. We pass the first opening of the kidney with one needle and straighten the thread.
9. Then we sew through two heads, pulling the heads into one hole on the opposite side.
10. With this method, the cover is stitched all the way through.
11. Now fasten the thread several times, passing through the remaining opening. Please accept part of it.
12. On the top part of the cover, make 2 openings, at a distance of 1 cm.
13. Pull a decorative thread through them, tying them at the end from behind. Respect the garniy bow.

Warm thread cover

Such a soft white and fluffy phone case will make your hands warm in the winter frost. It is accepted on the dock, and has a new appearance. Let's try to make such a case with our own hands, following the instructions with a step-by-step description.

You will need:

• White yarn
• Glue gun
• Knifes
• Parchment papier
• Scotch
• Paper for a VIP
• Line

Robot head:

1. Turn the phone over with paper, secure the sticks and place it with tape on the side of the screen. Make sure the back cover is too small to match the surface.
2. Using a glue gun, create a base on the back of the spine, covering the entire surface with glue, creating a wide opening for the microphone and camera. Also check the other parts of the phone.
3. If the glue is dry, remove the base and now work on it.
4. Wind the thread onto the ruler so that the threads run parallel. We wind based on the width of the phone, it may indicate the width of the wound threads.
5. Apply glue to one edge of the line with threads and stick it onto the base cut with glue. We sew a bunch of quills with dried glue and cut the thread along the longest edge of the line. We also cut the thread from the skein.
6. In this manner it is important to ensure that the entire cover is not filled with lint. From the previous row, the traces are approximately 5 mm.
7. Once you have glued the entire back cover, punch the same parts with the barrel parts.
8. Our cover is ready!

Beaded cover

A cover made of beads extracts great patience and staying power, as a master, no one will have such a cover. Of course, you can glue beads onto the cover of the phone, shaped from a new baby, and knitting it will look more beautiful and finer.

It is often realized that an old case for a smartphone has already lived its life and it is impossible to use it. Or, when buying a phone, they forgot about this zahist. And in order not to waste your money, but to earn good money for yourself, you can easily sew a case for your favorite smartphone with any kind of skin with your own hands. This is not a stock of great value.

Maysterimo I'm looking for a do-it-yourself model of a smartphone case

1. You need to take a strip of leather (not too thin, at most about 3 mm).
2. Choose from this route, depending on the size of the phone so that there is not too much space, otherwise the smartphone will fall out of control.
3. Next, mark the seam with an oval or a thick place for the seam - approximately 4-5 mm from the edge.
4. Then, using a home-made copier, you can make openings for the threads, you can, of course, twist the awl for this purpose, but it will take more than an hour.
5. Now you need to carefully drill through the holes with a screwdriver and sew according to the line directions.
6. From a piece of plywood, cut a rectangle that is approximately similar to the phone itself, and insert it into the blank of the case.
7. Soak everything in cold water for two or three years to get comfortable.
8. After an hour or so, let it dry and allow a little more to dry.
9. I avoid stretching the plywood and creating rounded pieces. And also, behind the scenes, try to open the door for the headphones and charger. The cover is ready, you can quickly leave satisfied!

We create a simple option for saving your phone in the form of a book

There is also a book version of such a virus, which is similar to most young ones. The price is high, but you can try changes, spend it and show your imagination. It’s not so easy to make a skinny book case for a smartphone with your own hands, but the result will please anyone. When replaced with a traditional cover, it looks more elegant and beautiful.

To virobu you will need:

1. Shkiryan cloth, thickness 2-3 mm;
2. Thin cord from the skin or original thick threads;
3. Cardboard;
4. Screwdriver;
5. Awl;
6. Ruler (more fluidity);
7. Water;
8. Handle chi olive;
9. Magnet;
10. Plastic mіtsna form, beyond the size of the phone or original gum.

Let's get down to the nitty-gritty:

1. Use cardboard to make the base of the smartphone.
2. Then trace the base onto the leather cloth.
3. Using an awl, make holes for the thread around the perimeter, with rounded corners.
4. With the help of a screwdriver, you can get a little more work done.
5. Two parts are sewn on one side, and the three sides are simply sewn with threads (without squeaking together!).
6. In the plastic form, create openings under the roses and sew them to one part of the skin (or you can not twist the stitches tightly and simply attach the rubber bands so that the phone stays dry).
7. From the skin fabric that was lost, cut a small rectangle or an oval and sew it to the bottom of the cover.
8. Glue the magnets so that the rectangular visor is secured to the top part.

Axis and another virus ready.

Let's look at the original idea of ​​an envelope for a girl's gift

What is original is the unexpected idea. Such a case is more suitable as a gift for a girl on National Day or Eighth Birth. Any lady would be surprised at such a surprise among the people in her eyes. The most important thing is to use your imagination, and decide - your friends.

For the virobu you need everything, as always:

1. Skinny cloth (soft russet or white color);
2. Awl;
3. Button;
4. Threads.

Let's get started:

1. Cut the blank (you already know in what way: for the size of a mobile phone, but don’t forget about the shape of the envelope).
2. Use an awl to make holes from the sides.
3. Sew on both sides.
4. Glue one part of the button onto the top jersey, and another part onto the cover itself (open everything correctly so that the envelope closes normally).
5. The gift can be embellished by trimming it with threads or rhinestones.

All is ready. You can divuvati.

Master class from the creation of another fabric cover

Of course, in addition to fine and luxurious covers, you can make something even simpler. For example, create the same virib, ale, with wicked fabrics.

To virobu you will need:

1. Fabric: felt, full or wool;
2. Heads - pins:
3. Scissors for sewing, or else go and get started.

Let's get started:

1. Cut two bases of fabric with scissors.
2. Fasten with pins in various places, sew, by hand or by machine, from the sides and from the bottom.
3. The top may not be open, but for greater safety, you can secure it so that the phone does not fall out.

And if you place your smartphone very carefully, you will still need a case. Chi is not for zakhistu, but for beauty. Let your powerless hand sit on your mobile phone like a warm garment and the wonder of all your friends, acquaintances and passers-by.

Video compilation on the topic of statistics