How to set up SLK for robots on multiple computers. Installation of a configuration licensing system (CLS) on a Linux server Installation by phone
In this instruction we will look at how to set up the SLC for work on several computers. In the example, there is a robot on two computers connected to a single network. Two hardware keys are used for protection: on the main working place of the red color and on the additional working place of the yellow color.
Note: Instructions for working with software keys can be viewed again
Setting up SLK
We launch the 1C program.
When you start the program on your additional workspace, you may receive the following notification:
You need to go to the “Licensing system parameters” link. In the window you can specify the name of the IP address of the computer on which the security keys are installed, as well as the edge port. The name of the computer can only be indicated if it is written in Latin letters. Then click “Check license”, if the key is found, you will see the following message:
After that, close the window for setting up the “Record and close” button.
Before the start of the crisis, take care of the adjustment programs.
Note: If the verification does not pass, it is possible that the firewall or antivirus is blocking port 9099 or other malware. Please check which port is open. If the port is closed, you can either turn on the antivirus and firewall, or configure rules for that port.
Note: You can find out which port is being vicorized in the SLK console:
Why be careful, why SLK “do not release” the key zakhistu
If after the described things you still can’t get started with the SLK robot, you need to formulate a request from our technical support by mail [email protected]. For a quick nutritional analysis, please enter:
Outside the name and release of programs.
Robot mode in 1C: file, client-server, web server. Let's marvel at the robot mode, marvel at it
SLK version, information about licenses to be reviewed:
hardware and software keys;
How many workstations have licenses?
Before we do so, we need to install the licensing system itself (SLK), and you can review the instructions below. SLK must be installed on the main computer, on which the keys will be installed and protected.
After installing the SLK, the offensive keys are installed on the main computer, and the SLK console is launched. The console can be opened from the additional Start menu:
Note: The console can be opened in the browser. If it does not open automatically, you need to open any browser on your computer and enter http://127.0.0.1:9099 in the address bar.
If the keys are valid and everything is installed correctly, they will be displayed in the console:
According to the skin key, the type and number of licenses is written.
This type has a main key for 1 working station and an additional key for 5 working stations.
IMPORTANT: The additional key cannot be used without the main one. If you only install it on your computer, the console will display information about the required master key:
If the keys are not displayed in the console, please follow the steps below:
If the device does not work properly, you will need to try updating the driver: 
Detailed description of food:
the wording informs you what the smell is (add screenshots);
Why burn the keys? No one has tried to verify its effectiveness on other ports or computers;
where the keys are displayed in the SLK console;
On any computer it is not possible to configure the robot: the largest and most advanced ones.
Actions to change third-party distributors, zokrema. What is produced under the 1C brand within the framework of the “1C-Spilno” projects has an additional protection with a software or hardware key, which is processed through the Configuration Licensing System (SLK).
Installation without police in the Wine@Etersoft view is possible starting with version SLK 3. At the time of writing this article, version 3 is available in Release Candidate (rc) status
Version 3.0 is a development of version 2.1 and has a major twist on it. The configuration included with SLK version 2.1 can be transferred to SLK version 3.0 without providing the program code.
Start with the release of SLK version 3. Write a sheet to the address of the technical configuration support (indicated in the documentation before it) at the approximate location:
We are installing a 1C:Enterprise server on Linux and we would like to install the SLK server on this server. We know that there is already a current version of SLK 3, which works normally in the Linux OS, but has not yet been officially released and is encouraging a turnaround from SLK 2.1. We really need this distribution. You, as a retailer, can get rid of it by turning to the technical support of SLC for the address [email protected]. Be kind, give us the distribution kit for the server and components of SLK 3.
You need to select two archives
Licenseserver-3.0.10.6556-rc1.zip licenseaddin-3.0.10.6556-rc1.zip
de 3.0.10.6556-rc1 - the number of the folded SLK is current, at the time of writing this article, you can select more recently folded ones.
Installed on the server
The server delivery package includes a distribution kit for Windows and 4 distribution packages for various Linux architectures.
Copy the required files to your Linux home folder, for example ~/slk. Installation, for example, for Ubuntu 64-bit architecture:
$ cd ~/skl $ sudo dpkg -i licenciserver-3.0.10-6556.rc1.amd64.deb
Running the SLK service on Linux
$ sudo service licenciserver start
The SLK console is available in the browser through port 9099. Type in the address row of any browser through which you can reach the server server_address: 9099
The console looks something like this:
The server service is installed and working. Hardware keys work immediately, without installing any additional drivers. Activate software keys whenever necessary.
Client component updates
If the configuration designer, for whatever reason, is not ready to transfer the configuration to SLK 3.0, you can independently update the security components at work stations. Everything necessary for this is located in the archives of licenciaddin.
To install client-server, server on Linux
Checking the availability of licenses in the client-server version of the 1C:Enterprise server. To do this, you need to install an external component on the server. Support for Linux OS components appeared only in version SLK 3.
Copy a package that matches the server architecture to your Linux server's home folder and install it, for example, Ubuntu 64-bit architecture
$ cd ~/slk $ sudo dpkg -i licenciaddin-3.0.10-6556.rc1.amd64.deb
For file robot mode
Go through the workspaces on OS Windows and install the distribution kit licenseddIn-3.0.10.6556-rc1.win.exe on them (3.0.10.6556-rc1 - the current SLK collection number at the time of writing, you may have a different one, so you can walking with the serial number of the SLK server). On Linux desktops, install a distribution kit of a cross-platform architecture, as described in the previous section.
You can set the SLK for the song version of the configuration in the table below:
To update the licensing system, we can include the following actions:
We close all 1C programs and remove the hardware keys.
We see the old licensing system. For this, let's go to the folder "C:\Program Files (x86)\1C\Licence 2.0\Uninstall" and run the file "Uninstall.exe":
The remote licensing system window opens. Click on the “Continue” button:
Submit a notification about the confirmation of the appointment. Let’s check all the boxes and click on the “Visibility” button:
Once the deleting process is complete, click on the “Exit” button:
Download the distribution kit of the licensing system 2.0 and unzip it into the following folder:
The unpacked folder will have the following files:
Launch the file "LicenceSetup.exe". When the window for installing the licensing system 2.0 opens, click the “Continue” button:
At the next window, we will check all the boxes. The folder in which the licensing system will be installed will be stored. Click the “Install” button:
If the installation program appears to be advanced, click “Install”:
The installation process will begin:
At the hour of installation, the message “Install the software for which device?” will appear, click the “Install” button:
Once the installation process is complete, check the box “Launch the SLK server console when exiting the installation programs” and click on the “Exit” button:
The Server Console window opens. Hardware keys can be built into the USB ports. In this case, all security keys will be displayed in the SLK Server Console window:
You can set the SLK for the song version of the configuration in the table below:
To update the licensing system, we can include the following actions:
We close all 1C programs and remove the hardware keys.
We see the old licensing system. For this, let's go to the folder "C:\Program Files (x86)\1C\Licence 2.0\Uninstall" and run the file "Uninstall.exe":
The remote licensing system window opens. Click on the “Continue” button:
Submit a notification about the confirmation of the appointment. Let’s check all the boxes and click on the “Visibility” button:
Once the deleting process is complete, click on the “Exit” button:
Download the distribution kit of the licensing system 2.0 and unzip it into the following folder:
The unpacked folder will have the following files:
Launch the file "LicenceSetup.exe". When the window for installing the licensing system 2.0 opens, click the “Continue” button:
At the next window, we will check all the boxes. The folder in which the licensing system will be installed will be stored. Click the “Install” button:
If the installation program appears to be advanced, click “Install”:
The installation process will begin:
At the hour of installation, the message “Install the software for which device?” will appear, click the “Install” button:
Once the installation process is complete, check the box “Launch the SLK server console when exiting the installation programs” and click on the “Exit” button:
The Server Console window opens. Hardware keys can be built into the USB ports. In this case, all security keys will be displayed in the SLK Server Console window: