Quick start of your Windows 7 computer. Speed ​​up your computer: how to increase PC productivity. Quick Start Menu

It also happens that when the operation is locked, the system takes a long time to start, or it doesn’t start as quickly as you would like. In this manner, precious time is wasted. This article has significantly different ways to increase the speed of launching the Windows 7 operating system.

You can speed up the startup of the OS either by using additional specialized utilities or by using the installed system tools. The first group of methods is simple and, first of all, not suitable for experienced traders. Otherwise, let's go to these koristuvachs, who have come to understand that they will change on the computer.

Method 1: Windows SDK

One of these special utilities that can speed up the startup of the OS is developed by Microsoft - Windows SDK. Of course, it is better to use such additional tools from the system developer himself, rather than trust third-party developers.

1. After selecting the Windows SDK installation file, run it. If you do not have a special component installed that is required for this utility to work, the installer will prompt you to install it. Click "OK" to proceed to installation.



2. Then the final window of the Windows SDK installer will open. The interface of the installer and the shell of the utility is English-language, so we are informed about the installation time. Whose window you just need to click on "Next".



3. The license area appears. To use it, set the switch on the form of the radio button to position. "I agree" then push "Next".



4. Then you will be asked to indicate the path on your hard drive where the utility package will be installed. If you have no serious need for this, then it would be better not to change the adjustment, but simply press "Next".



5. Next you will see a list of utilities that support installation. You can choose those from them that suit your needs, since the bark, when properly cured, is suitable for the skin of them. However, in order to install our data itself, you will need to install the Windows Performance Toolkit utility. Therefore, we uncheck all other points and deleting the opposite "Windows Performance Toolkit". After selecting utilities, press "Next".



6. After this, a notification will appear telling you that all the necessary settings have been entered and you can now proceed to download the utility from the Microsoft website. Press on "Next".



7. Then the installation procedure begins. During this process, there is no need for the kristuvache to give in.



8. Once the process is completed, a special window will open to notify you of its successful completion. Write about the price "Installation Complete". I'll put the ensign on the opposite side "View the Windows SDK Release Notes". After whom you can press "Finish". The utility we need has been successfully installed.



9. Now, in order to speed up the Windows Performance Toolkit to increase the speed of OS startup, activate the tool "Viconati", having pressed Win+R. Enter:

   xbootmgr -trace boot -prepSystem

   Press on "OK".



10. After whom you will receive a notification about restarting your computer. Over the entire period of the war, the PC process will be restarted 6 times. To save an hour and not have to wait until the timer expires, after skin reset, press in the dialog box "Finish". Thus, re-ignition will occur immediately, and not after the timer has expired.



11. After continuing to reboot, the speed at which the PC can start may increase.

Method 2: Cleaning startup programs

Adding programs to autostart has a negative impact on the speed of starting the computer. Often there is an installation procedure for these programs, after which they are automatically launched when the computer is turned on, thereby increasing the time of death. If you want to speed up the use of your PC, you need to remove those programs from autorun for which this ability is not important. Even in the auto-registered registration you can find add-ons that you really haven’t used for months.




Also, programs can be added to autorun not only through the registry, but by creating shortcuts from the father. For an additional option through the system configuration, which is more than described, such software cannot be seen from autorun. Then you can use another algorithm of action.






This way you can remove other unnecessary shortcuts from the folder. Now Windows 7 can start starting faster.

Method 3: Turn on autostart services

No less, and maybe even more, is the launch of the system and various services that start simultaneously from the computer’s core. In the same way as we used the software, in order to speed up the startup of the OS, you need to find services that are low-cost or low-cost for tasks such as computer software, and turn them on.

1. To go to the Service Control Center, click "Start". Then push "Control panel".



2. In the window that appears, click on "System and security".



3. Then go to "Administration".



4. The list of utilities that are available in this section "Administration", find the name "Services". Click on new to move to "Service Manager".

   

   U "Service Manager" You can use it more quickly, but you will need to remember one command and add hot keys. Type on keyboard Win+R, thereby finally launching "Viconati". Enter your virus:

   Click Enter or else "OK".



5. Regardless of whether you acted through "Control panel" or a tool "Viconati", open window "Services", in which there is an overflow of running and disabled services on your computer. On the contrary, the names of running services in the field "Mill" value is inserted "Pratsuє". How to name those of them that are launched simultaneously from the system in the field "Launch type" worth a lot "Automatic". It is important to take this into consideration and ensure that you do not require any services that start automatically.



6. After that, to go to the location of a particular service, to turn it on, double-click the left mouse button behind its name.



7. Starts at the end of the service. Here you need to work out the manipulations to enable autorun. Click the field "Launch type" in any moment it is worth value "Automatic".



8. From the list that you have opened, select an option "Disabled".



9. Then press the buttons "Zastosuvati"і "OK".



10. After this century, the authorities will be closed. Now "Service Manager" on the contrary, the name of this service, from the authorities in which changes were sought, from the field "Launch type" will be worth a lot "Disabled". Now, when you start Windows 7, this service will not start, which will speed up the startup of the operating system.



Let me just say that if you do not know what a particular service stands for or what its consequences will be, then manipulating it is categorically not recommended. This can cause serious problems on your PC.

At the same time, you can familiarize yourself with the lesson materials, which reveal which services can be modified.

Method 4: Cleaning the system

To speed up the startup of the OS, clean the system as soon as possible. First of all, please clean up your hard drive for timely files and delete deleted entries in the system registry. You can do this manually by clearing folders of time files and other entries in the registry editor, and vikoryst and specialized software tools. One of the most useful programs for this is CCleaner.



Details about how to clean Windows 7 from dirt can be found in the following material.

Method 5: Select all processor cores

On a PC with a multi-core processor, you can speed up the computer startup procedure by connecting all processor cores to this process. On the right is that when installing an installed OS, only one core is involved, usually in a multi-core computer.




Method 6: Setting up the BIOS

You can speed up the OS by updating the BIOS. On the other hand, the BIOS often first checks the possibility of using an optical disk or USB storage device, which is very important at this time. This is important when the system is reinstalled. But wait, reinstalling the system is not such a common procedure anymore. Therefore, to quickly get started with Windows 7, you should first check the ability to run from an optical drive or USB drive.

1. Go to the computer's BIOS. For what hour of your interest press the key F10, F2 or else Del. There are other options. The specific button is located in the motherboard distributor. However, as a rule, the key entry for entering the BIOS appears on the screen when the PC is turned on.
2. Further actions, even after logging into the BIOS, you will not be able to write a report, several different software providers will use different interfaces. We will describe the exact algorithm of our actions. You need to go to the section that shows the ugliness of using the system from different sources. This section is called on higher versions of BIOS). In whose division you have to first place the blackness of the hard drive. This method is often followed by the point "1ST Boot Priority", where trace set values Hard Drive.

After you save the results of the BIOS adjustment, the computer will immediately download the operating system to the hard drive and, once you know it there, will no longer use other devices, which will save an hour on startup.

Method 7: Hardware upgrade

You can also increase the speed of Windows 7 by upgrading your computer's hardware. Most often, the problem may be due to the low speed of the hard drive. And here you need to replace the hard drive (HDD) with a larger Swedish analogue. And the best option is to replace the HDD with an SSD, which is much more effective and allows you to quickly speed up the time spent on installing the OS. However, SSDs have disadvantages: the high price is limited by the number of write operations. Therefore, the koristuvach must call out all the pros and cons.

Koristuvac's food

I'm flying.

Let me tell you why my Windows 7, after installation, works normally, everything opens quickly and is interesting. After 2-3 years, it’s time to replace it: the computer starts to hang up for a long time, the conductor is reluctant to react, and the whole job seems to be going smoothly.

How can you optimize and speed up the system without systematically reinstalling it so that it works as quickly as after reinstalling the system?

Good day.

This is typical Windows behavior, and the system itself is not to blame here; it would be the same, for example, with a dozen.

On the right, over time, Windows accumulates a large amount of “stuff” (time files, cache, etc.), new programs are added to the auto-play, all sorts of gadgets appear, and so on - it all starts to “e” the RAM , take over the processor, disk subsystem, which affects productivity.

In this article I will give you a number of important recommendations to optimize and speed up the system (Before speaking, I don’t see options with an upgrade, for example, when purchasing additional sticks of RAM or an SSD disk).

9 steps to speed up Windows 7 system

Description of the problem:

As we have already said, over the years, the world has installed programs, some of them are registered in the auto-installed Windows and start immediately when the computer is turned on. All this would be nothing, except that some of these programs can reach resources and are listed on the PC speed rating, although it is significant.

I especially want to download uTorrent. If you have a lot of torrents and the program is in auto-locked mode, then Windows can be locked in for tens of seconds longer!

Decision:

It’s more logical and simpler - you need to open the auto-enablement setup and delete all applications from it, but you don’t need it. In my opinion, in auto-mobile you will need more programs that you use while the computer is on.

To review auto-enablement in Windows 7, press the WIN+R keys, then enter the msconfig command and press Enter (example below).

Before speaking, check Windows Auto-Van and remove applications from your computer, special utilities can help. One of these is CCleaner (example in the screenshot below). Do it manually: to look at the list of auto-enablers in CCleaner, just open the menu.

Services: what can be enabled

Description of the problem:

Windows has a lot of services enabled, which take up RAM and otherwise affect productivity (This means that enabling “sensitive” services is especially important on light-duty PCs with a small amount of RAM).

For example, you don’t have any fax- a message for you about this service, or dispatcher friend - what kind of printer?

Decision:

Optimizing this timeline is to enable those services that are not needed on your PC. To enable any service, you must open its list. Why press the keys? WIN+R, enter services.msc, press OK.

Next, select your service from the list: its description appears below. To enable the service, open it by clicking the left mouse button (in your application, select renovation center ).

Then, under the “Launch type” column, select the “Launch” option, and then click the “Launch” button. In this way, you shut down the service, and it will no longer start.

Important!

Do not enable all services, some of them are required for normal operation of the system. If you ever have an emergency, the first thing you need to do is change it - read the description of the service, and a wise sense. And then, (backup) - like a raptom, calmly calm down.

What services can be enabled in Windows 7:

• Windows CardSpace;
• Windows Search;
• Offline files;
• Agent protects access to the limit;
• Adaptive brightness control;
• Windows Backup;
• Additional IP service;
• Second login to the system;
• Grouping of border participants;
• Automatic connection manager for remote access;
• Connect manager for remote access (as there is no VPN);
• Monitoring of border participants;
• Productivity logs and alerts;
• The convulsion has been stolen;
• Setting up servers on remote desktops;
• Smart card issuance policy;
• Software installer for shadow copying (Microsoft);
• Listener of home group;
• Warehouse under Windows;
• Margin entrance to the system;
• Tablet PC introduction service;
• Windows Image Imaging Service (WIA) (as it does not have a camera scanner);
• Windows Media Center Scheduler Service;
• Smart card;
• A dark copy of that;
• Vuzol diagnostic systems;
• Vuzol Diagnostic Service;
• Fax machine;
• Host of the productivity clinic library;
• Safety Center;
• Windows Update Center (I recommend turning it off for an hour. And updating is carried out manually, because in auto mode this service often creates a high impact, as it does on the PC).

Clearing waste from the system

Description of the problem:

Even if you haven’t carefully cleaned out your Windows, all the same, over the years, a great amount of stuff will accumulate in it: old tails in the registry from long-deleted programs, time files that were lost during the installation of any software, browser cache iv etc. All these files accumulated around the world begin to affect the productivity of the system as a whole.

Over the course of an hour, a merchant of this kind will accumulate tens of gigabytes!

Decision:

So as not to repeat and write down here, anyway, I recommend that you familiarize yourself with my instructions (the message is posted a little lower).

Unnecessary visual effects

Description of the problem:

Windows 7, in line with Windows XP, has become more beautiful: effects, shades, Aero, etc. All of this is shown on the computer's SWD code (even noticeably on weaker machines).

This problem can be attributed to gadgets(small windows on the desktop that can inform you about the weather, exchange rates, etc.). The stinks appeared right away in Windows 7 – and everyone began to actively exploit them. It took hours for the stench to reach the system.

Decision:

More gadgets- It’s enough to close them, and they will disappear from the work table (stop consuming your resources). The same weather and exchange rates can also be found manually in the browser.

What are the concerns about visual effects?- then to configure them, open the following address:

Keruvannya panel\System and safety\System

In the "Add-on" tab, open the swidcode parameters (see screenshot below).

At the deposit "Visual effects" Uncheck those effects that you do not need. For maximum speed of the system, check the box next to the “Protect the best speed code” option. Then save adjustments.

The external appearance may become a bit confusing, but the system will become much more strange.

Drivers: everything is right with them

Description of the problem:

The driver - the driver suffers! There is a lot of information about the driver version. For example, those drivers that are installed into the system immediately from Windows do not always work optimally (for example, a video card may not work to its full potential (due to reduced speed), the driver for a video card cannot be adjusted too well).

Before that, you may not have drivers installed on your system (as in the screenshot below). Before speaking, to see that there is no driver, open it (win key + R, then enter the command devmgmt.msc).

There are no drivers for the video card, edge controller, Ethernet controller, etc.

Decision:

1. The best option: download the drivers from the manufacturer’s website of your computer/laptop. You can also quickly download the driver disk from your PC upon purchase (as saved 👌). If you don’t know the mastery, you can speed up.
2. You can speed up. I have a number of articles dedicated to them on my website, one of which I am sending to you...
3. What is possible: I recommend checking several versions of drivers (especially for the video card). It often happens that an older driver outperforms a newer one.

Adjusting the electrical life

Description of the problem:

This problem affects laptops, netbooks and compact gadgets that run on batteries.

On the right, there are a number of work modes: economy (if the laptop is low on productivity, save energy for more work from the battery), extreme and high productivity.

And behind the thinking, most often there is a balance (balancing) and an economy...

Decision:

Panel keruvannya\Obladnannya and sound\Electrical life

Select power plan // Windows 7

For detailed adjustment of the power supply: first click on the “Adjust power plan” option (opposite the selected power supply mode), then at the bottom of the screen open the option “Change additional power supply settings”. You can then open the required tabs and adjust the skin settings.

For example, it is often necessary to adjust the operation of the hard drive (to prevent it from spinning), or to adjust the brightness of the monitor (to gain adaptability), etc.

Moreover, electrical parameters can be set using special utilities. For example, they occur on laptops from Sony, Acer, Lenovo, etc.

As a rule, you can open their settings through the assistant in the tray, next to the date (screen below). If there is nothing like that in the tray, turn over the Windows browser panel.

File indexing

Description of the problem:

As a bonus, Windows 7 has indexing enabled instead of files for quicker search (for example, enter a phrase in a text file, and Windows finds it on the disk. Manually!).

I also noted that this function is used by 10% of clients. So, you don’t need it, but you have a lot of disk subsystem resources that can be turned on?

Decision:

To do this, go to “My Computer”, select the drive and open its power.

Disk defragmentation (word about HDD)

Description of the problem:

Defragmentation is the process of rearranging files on a disk so that they are distributed in uninterrupted areas (so that they can be more important from the disk).

If you regularly defragment your hard drive (HDD), then the speed of reading and writing files will be of great value to you (especially, fragmentation is similar to the FAT 32 file system). You can find a report on defragmentation at.

Decision:

If you need to wake up your PC if it is in sleep mode

Description of the problem:

Many koristuvachiv I feel like not vikoristuvachiv sleep mode, deep sleep, etc. Various types of computer/laptop switching to low-energy mode. I will turn the computer back on again if you plan to turn it on again in a year or two.

The hour-long sleep mode allows you to quickly revive your work, literally in 1-2 seconds. Why the hell, you can protect your property for an hour.

Decision:

All you have to do is press the START button, then select “Sleep” from the options to complete the robot (as shown in the screen below). If you don’t have such an option, then the problem with the drivers will disappear (about the whole thing).

Note: You can configure the electrical settings on the Windows Windows panel after an hour to put the computer into sleep mode (example below).

We are so humble and glad to help you build your Windows 7 amazingly (verified more than once on our PCs 👌).

Hello friends! Today I want to tell you about those how to speed up your computer And in this way we will spare a little of your gap. You melodiously noted how quickly the computer restarts after reinstalling Windows, before I wrote about it here. All that is just installed, the operating system is still clean and in avtozavantazhennya There is still nothing left. Today I want to tell you about car ownership.

– these are programs and services that automatically start after the computer is turned on. I think you noted that the computer is no longer up and running, the work desk has appeared, but it’s impossible to do anything, as long as the system needs to be disrupted. The axis still launches all the programs from Automatic. This is a very important function, for example, in the auto-enabled system, antivirus, ICQ and other basic programs are launched, and at the same time a lot of information is launched. Such as the NERO service, Google or Adobe services, they are practically not needed and our work will eliminate them. Whenever I come to see someone who is amazed by the computer, I always check the automaker. I check this with the special Total Commander packages in which the utility is embedded "Autostart programs".

There are a lot of other programs with which you can check auto-enablement, but I have already called up Total Commander and use only it. You can captivate him. For example, Avtozavantazheniya looks like this for me:

This is less noticeable, since I installed the operating system quite recently. I was harassed by computers with such auto-obsessions that I was already holding my head :)

If, in order to clean your system thoroughly, you will be using Total Commander, which you can use for anything else you can do, then do it like this:

PC obsession is coming soon

1. Download, unpack and launch.

2. When it starts, the “Optimization” tab will be clicked and selected "Autostart programs"

3. Enter it in the same way as in my case. In this window you need to uncheck the boxes from the program of services that you think are not needed. Ale my pleasure to you, since you didn’t sing, it’s better do not uncheck the box, otherwise you can get some work done 🙂 I can’t say exactly what you need to tidy up, because I don’t know what you have installed.

4. Once you have tidied up everything, you no longer need to click the “Save” button and restart your computer to view the results.

However, it doesn’t matter which program you use to clean the auto-enabled system, but restore the standard functionality in Windows. You can click on it by typing in the command. Golovny, what I want to say is that cleaning and periodically checking the auto settings will help your computer run faster and work better. Good luck!

Before reasonable meals How to Speed ​​Up Windows 7, the cost of a computer is not only a low-power computer, but a highly productive machine. In the system, resources are effectively wasted by powerful forces, but through the actions of the system, incorrect adjustment and other negative phenomena, the system begins to waste completely. Let's look at ways to get the most out of your computer.

How to speed up the popularity of Windows 7 before the hour of sleep?

You can speed up your Windows 7 computer by setting up the BIOS (UEFI) and autostarting several programs.

If the BIOS is properly configured, you can save up to half an hour to start the system. We can change the main parameters:

1. We restart the computer and press Del, F2 or another key before starting (as the button is expanded, you can see the documentation for the computer).
2. Let's move on to the Boot section in older versions - Boot Priority.
3. The Fast boot section is set to Enable.
4. In the "1st Boot Priority" column you can install your own HDD or SSD.

After the change, the system will no longer detect the presence of the disc in the DVD drive, flash drive and other USB devices. During startup, the USB keyboard will not work; in the future, it will be easier to start in safe mode.

There is an important procedure to follow - to set up your programs for autorun:

1. After starting the system, press Win + R and enter msconfig.
2. We take videos from other programs. It is important to remove the available ones, otherwise they will need to be launched manually.

Work with disk

You may already notice a significant increase in speed, but continue the procedure to speed up the use of your Windows 7 laptop and increase the productivity of your hard drive. HDD is a single mechanical element of a computer (except for a disk drive), which is extremely powerful and often upgrades a PC. The best option is to install an SSD, but in the absence of such an option, you can use your HDD for less efficiency.

We collect time clock files:

1. We love CCleaner from the office. website.
2. Once installed, click on Run Cleaner in the Cleaner tab.

1. The program automatically deletes files so that they do not need to be reviewed or processed in a timely manner.

Another stage of acceleration is the availability of third-party programs:

1. In the same CCleaner program, go to the “Tools” section.
2. We pick up unknown, low-quality, outdated programs and games.

Stage 3 – disk defragmentation:

1. Go to “My Computer”, RMB from the system partition of the disk, then select “Power”.

1. Click on the “Service” tab.
2. Click on the “Discontinue defragmentation” button.

After completing the procedure, you can quickly log out other partitions from the system disk.

How to speed up the popularity of Windows 7 64 bit by adding visual effects

Before speaking, there is a strong demand for the availability of this type of antivirus, it is recommended to replace it with a less resource-intensive one or use anti-virus scanners. There will be no permanent protection from them, but if necessary, you can easily run a system scan and remove viruses, one of the best options is Dr. Web.

The classic system theme requires far fewer resources and fewer animation options. Once you are ready to put up with a simple interface, let's start changing the parameters.

Effects:

1. Click on Start, RMB on “Computer” and select “Power”.

1. Select "Additional system parameters".

1. In the “Swidcode” section, click on “Options...”.

1. We install the “Ensure the best possible speed” view.

1. We are sure to change it.

Change timeoutu zavantazhenya

This method will also help speed up the use of Windows 7, the growth will not be so noticeable, but still noticeable.

We change the hour of the hour:

1. Press Win+R and enter msconfig.
2. In the "Timeout" column, set the value to 3 (if one system is installed).
3. We install the flag "Without GUI".

1. Click “Freeze” and close the window.

Additional methods to speed up the productivity of Windows 7

And a bunch of other cool ways:

• types of viruses. One antivirus is not enough to detect all threats; it is recommended to use a program like Kaspersky, Dr. Web, Malwarebytes Antimalware;
• work from the floor. Since it is easy to install little RAM and low storage capacity, it is better to simply expand the display. Before the processor can be overclocked, this procedure will speed up wear;
• cleansing before sawing. Due to the problem, the computer overheats and begins to work excessively. You can either clean it yourself or go to the service center. Sometimes overheating occurs through a weak cooling system; it is possible to install a completely tight cooler;
• setting the priorities of the work. In the “Task Manager” (Alt+Ctrl+Del) in the “Processes” tab, you can set the priority of the task. We know the required program, RMB at the process, move the cursor to “Priority” and set “Real hour”.

With the help of precautionary methods, the computer will become much faster, and it will become more acceptable to use it.

If you are running out of food on the topic “Windows 7 Accelerated Acceleration”, you can ask them in the comments

Any user of the Windows operating system will note that as time goes on, the work of the system will significantly improve. You will have to regularly reinstall the system, after which you cannot do without adjusting the system for comfortable operation. Tim is not less, but the methods, in which way you can speed up your downloads Windows 7 and encourage them in the practical process.

Currently, Microsoft is announcing the release of the new Windows 9 OS, so it is no longer possible to call the new Windows 8, which was released quite recently. Tim can no longer be called the new Windows 7. Tim no less, most of the world's computers run Windows XP on their computers, and often the transition to a new OS is not due to insufficient hardware, but simply because On the new installation it has been verified And XP is expected to become popular and work richly, either “Simka” or “Visimka”.

Soon I'm interested in Windows 7 at Chotiri Kroki

Krok 1

As a modern OS, Windows 7 will support modern processors with multiple cores. However, first of all, not everyone knows about this, but in another way, the replacement of all available cores begins only after the operating system is installed.

All that needs to be done in this phase is to change the mindset in order to add support for rich-core processors when upgrading the operating system. For this purpose, it is entered into the msconfig system, so you can click it from the command row. To do this, you can quickly access the “Viconati” menu in the main menu of the system or by pressing the hot keys Win + R. In the window you need to enter msconfig and click on the OK button.

Apparently, what appeared was a bunch of tabs. In this section you need to go to the “” tab and click the “” button Additional parameters».

For unchecking the options " Number of processors» and “Maximum memory” every day. You need to install them and select the maximum number of cores for your computer and maximum memory usage.

Please note that after replacing the processor with a stronger one or expanding the memory, you will need to remember to adjust these values.

Croc 2

Operating system Windows 7 There is a lot of potential, both in terms of supporting various possessions and in terms of supporting boundary tasks and complex software complexes. For greater versatility, the system does not require any special software implemented as system services. The most advanced configuration of Windows 7 Ultimate is especially worthwhile. Timing is no less, a large number of services that are launched at once when the system starts, and if not selected in the robot, can significantly increase the time of use.

Corysne video:

STOP! Read similar articles - find out something new.