SSD is a device that has the same meaning as a hard drive, but in terms of its operating principle it is very different from its counterpart. Okrema, since on the right is the operation of Windows installed on the SSD, you need to properly optimize this device in order to properly continue the term of your service.

Optimizing SSD for Windows

Let's say you already have the Windows operating system installed, starting with the current version, on a new SSD. However, in the text below you can read a few instructions on how to perform this procedure correctly.

The main feature of a solid-state drive is that it is subject to a number of rewriting cycles. This means that the data on the disk is most likely to be erased and written over again. Right now, we are starting to optimize the SSD for the Windows operating system.

Step 1: Verify TRIM activity

TRIM is a special feature introduced in Windows 7 that identifies areas that should not be scanned and allows them to be cleared for further recording. Since this function is disabled for the HDD, the storage service term can be extended for the SSD.

Stage 2: enabling automatic defragmentation

The next moment that can be seriously considered in the term of solid-state drive service is automatic defragmentation. On the right is that defragmentation is a useful tool for hard drives. It also optimizes records on the disk, which allows you to speed up the work from the HDD. The downside to SSDs is that the less rewriting of information is the better.

As a rule, when you install an SSD on your computer, Windows automatically enables this procedure, however, you still need to check whether this is the case.

Why press the key? Win+R, to open the “Viconty” window and enter the following command by pressing the Enter key:

The disk optimization menu will appear on the screen, where you will see the item "Solid Accumulator", in the lower area of ​​the window you may see the value "Vimk.". How do you view the item? "Uvmk.", right-handed click on the button "Change settings".

Check the box "Check out the layout (recommended)", and then save the adjustments.

Stage 3: deactivating the swap file

The paging file is a system file that allows you to store a small part of the RAM when it is under full load.

The bottom line is that the swap file receives data from RAM to the hard drive (solid-state drive). It becomes clear that when a file on a solid-state drive is active, information is regularly overwritten, which needs to be minimized.

As an option, you can completely deactivate the paging file to reduce the number of rewrite cycles on the solid-state drive, however, if the computer will be running a number of resource-intensive games or programs, the RAM may will completely end, which means a notification will appear on your screen upcoming plan:

Step 4: Turning on Windows Deep Sleep

Hibernation is a popular computer mode in which the computer hibernates after finishing work, and then resumes from the same place you left off. This way, you won’t have to restart all programs, open files, etc.

To get into deep sleep, run the command line as administrator (as described above), and then enter the command in the next step:

Powercfg -h off

From this moment of deep sleep it will be ignored, and the file that testifies for it will be deleted from the system.

Stage 5: enabling file indexing

The procedure for indexing files allows you to quickly find files on your computer, but due to the gradual overwriting process, it negatively affects the term of the SSD service.

Stage 6: activating record caching

Activating the function of caching records from both the solid-state drive and the hard drive.

Stage 7: Enabling Prefetch

Prefetch is a special technology for accelerating the acquisition of the system, which is aimed at working with large noses. As you know, this function is marginal for SSDs.

1. Launch the “Viconaty” window using the Win + R keys and enter the following command:

A registry window will appear on the screen, in which you need to go to the next button:

HKLM SYSTEM CurrentControlSet Control Session Manager Memory Management PrefetchParameters

Two click on the parameter "EnablePrefetcher" and set it to a new value «0» . Save your money.

It is best to allow the number of SSD rewrite cycles to be reduced without reducing system performance. Well, if you don’t go to the lengths of the statistics, the solid-state accumulator has been delighting you with its miraculous work for a long time. If you know other methods for optimizing SSDs, please share them in the comments.

Well, you just got a new SSD. You installed the system on the new one, became familiar with optimization, and after a couple of years you did everything you could to improve your work in the system!

Don't believe me? Think about what makes for high productivity. Advantages SSD speed You can see in three categories:

• system, for example, fluidity is a fascination with robots
• programs, including web surfing and working with documents, images and media files
• your activities, including disk navigation and copying/moving files

How mythology is popularized

I really believe that your efforts to configure the SSD have had a negative impact on at least one of these components. Then you will find out what happened, and first of all about the reasons for such optimization.

You can read the word “buffalo” on an elephant’s cage.

The measures include the absence of users and the referral of tweakers to optimize the SSD. In fact, the very same information is contained there, and:

• outdated, which is aimed at saving disk space and reducing the number of rewrite cycles, which is not relevant for current SSDs in home PCs
• marna, because Windows itself swears by those that need to be configured
• cheap, because it leads to a decrease in the speed of the robot - your program system

Marvel critical on your Twitter account or Twitter account and think about what points can be included in one of these categories!

One more problem - information was not supplied soon, zokrema incorrectly placed accents.

If you have a mix of SSD and HDD, check the speed of both disks and get the picture in your mind. I will turn around to her, and more than once!

Special notes for the unfortunate

After publishing the material, I wanted to specifically clarify a number of points so as not to repeat them regularly in comments related to opponents.

In this statistic:

1. All myths are viewed inclusively from the point of view of the accelerated robotic system, the program of koristuvach. Because the world is shocked by the dirty and wasteful, which means that it in no way accepts the accelerated work.
2. Short-term recording to disk is not seen as a measure of optimization due to the irrelevance of this approach. As far as your meta is concerned, myths 3 - 11 are for you, as well as saving the SSD in the sideboard.
3. The memory of the RAM disk is not visible, so it has no direct bearing on SSD optimization. If you have excess RAM, you can use a RAM disk regardless of the type of storage device installed in your PC.
4. All recommendations are given with a broad audience in mind. most koristuvachiv. For the sake of analysis, be aware that the stench may not be consistent with your tasks, skills, and knowledge about the optimal and competent use of the operating system.

The axis is now - let's go! :)

Mifi

1. Enable SuperFetch, ReadyBoot and Prefetch

This is a good idea: it may reduce the speed of running programs, and also in Windows 10, increase the amount of writing to the disk and reduce the overall productivity of the OS if there is a lack of RAM

Speedy launching programs from the hard drive

When the skin program starts, the prefetcher checks the presence of the trace (.pf file). As such, the vikoryst prefetcher sends metadata to the MFT file system to open all necessary files. Then it calls a special function of the memory manager to asynchronously read the data and code currently in memory. If the program is launched again or the startup script has changed, the prefetcher writes a new trace file (seen as a small one).

It is unlikely that SuperFetch will speed up the launch of programs from an SSD, unless Microsoft does not enable a function that prevents the presence of hard drives on the system. If the company's SSD tool (for example, Intel SSD Toolbox) recommends turning on SuperFetch, follow it for its sake. However, in this case it is more logical to run all programs on the SSD, which is easier.

Memory constraints in Windows 10

This aspect is covered in the article Nuances of enabling the SysMain service in Windows 10. Previously on this page there was a fragment from it, impromptu publications.

2. Vimknennya Windows defragmenter

I'm glad: uncolored or fragile, may reduce disk performance

One of the functions of the CheckBootSpeed ​​utility is to check the scheduled defragmentation task and the task scheduler service. Let's see how relevant these parameters are for other Microsoft operating systems installed on SSDs.

Windows 7

Windows 7 does not defragment the SSD, which is confirmed by the words of the blogger.

Windows 7 disables defragmentation for SSD drives. SSD fragments show wonderful results when read sufficiently; defragmentation does not provide such benefits as it does on the primary disk.

If you don’t believe the retailers, take a look at the magazine. You will not find any entries about defragmenting the SSD volume.

Thus, if the SSD is a single disk, the planned task simply does not end. And if the PC has another HDD, connecting the device or planner allows the hard drive to be properly optimized with a standard defragmenter.

Windows 8 and newer

In Windows 8, the place of the defragmenter has been taken over by the disk optimizer!

Optimizing hard drives, as before, comes down to defragmentation. Windows no longer ignores solid-state drives, but rather helps them, according to the controller additional Type TRIM commands right away for all this. It is located behind the layout at the boundaries of automatic maintenance, then. unless you work at a computer.

Continuously from the SSD controller, the data collection can be completed immediately after the fact of issuing the TRIM command, or before the period of inactivity. By turning on the disk optimizer or the task scheduler, you reduce the productivity of the storage device.

3. Vim or transfer the swap file

I'm glad: It is dirty, it reduces the fluidity of the robotic system in case of memory shortage

The hardware configuration may be balanced. If you have little memory installed, after adding it, the SSD fragments often compensate for the lack of RAM, which is quickly transferred to the hard drive.

If you have enough memory, the swap file is little affected, then. The term disk service is not correct. A lot of people still turn on pumping - saying, let the system keep everything in memory, I said! As a result, the Windows Memory Manager does not operate in optimal mode (section #4).

As a last resort, transfer the swap file to your hard drive. Ale if it is not enough for memory to appear, You will also benefit from productivity by having pagefile.sys on your SSD!

U: Do you need to move the swap file to the SSD?

About: Thus, the main operations with the swap file include either recording small volumes or sequentially recording large amounts of data. It’s best to carry out all types of operations on an SSD.

Analyzing telemetry, focused on the evaluation of writing and reading for the swap file, we found that:

• reading from Pagefile.sys outweighs writing from pagefile.sys by 40:1,
• Reading blocks for Pagefile.sys are expected to be small, 67% of them are less than 4 KB, and 88% are less than 16 KB,
• The blocks recorded in Pagefile.sys are large, 62% of them are larger than or equal to 128 KB and 45% are less than exactly 1 MB

The seemingly typical models of the swap file and performance characteristics of the SSD must be matched one by one, and this file itself is recommended to be placed on a solid-state drive.

In practice, however, it is impossible to continue to live at any cost of living with an SSD. The reader of the blog is working on his SSD, transferring pagefile.sys to the hard drive, wanting to end up with an unbroken eye, which reduces productivity. Before speaking, I can’t install more than 2 GB of memory in my netbook, and using solid-state drives made it much more comfortable than the standard HDD 5400 rpm.

Please, do not forget that if the swap file is not connected, it will not allow you to diagnose critical errors. The size of the swap file can be adjusted individually, so you always have a choice between disk space and productivity.

Tricky feeding: What is the size of my swap file if I take a screenshot of the task manager screen?

Special note

On the Internet (including in the comments to this post) you can often hear the following statement: “The paging file is not needed, as you have installed N GB RAM". Depends on fantasy N takes values ​​8, 16 or 32. This statement is meaningless, since you do not take into account the tasks that run on a PC with enough memory.

If you installed your own 32GB, but you are using 4-8GB, then you don’t need FP (or, unsurprisingly, you bought 32GB RAM:). If you have added such a lot of memory to make the most of it in your work, then FP will come in handy for you.

4. Avoid deep sleep

This is good news: it is not harmful for mobile PCs, it can reduce the battery life and performance of your robot

I would phrase it this way:

• Stationary PC - connection is normal, because With this very success you can get a dream
• Mobile PCs - connection is not always complete, especially when the battery drain is high during sleep

In addition, people have turned on, turned on and off system protection regardless of the type of disk, but it’s already in the blood! And no, I don’t want to discuss this topic in the comments here :)

6. Search for Windows and/or disk indexing

I'm glad: marna, reduces the productivity of your work

Some people argue that SSD desktops are bad, and that the index does not give a quick search. These people simply haven’t been bothered by the real joke of Windows!

I respect that it is foolish to indulge yourself in a koris instrument, which will speed up the end of everyday tasks.

If you have become a victim of any of these myths, tell me in the comments how I managed to redirect you from their morality and skoda and in some cases. If you don’t agree with my assessment of “optimization”, explain what the winning outcome is from these actions.

You can select fragments of text that will be available for you through unique messages in the address bar of your browser.

about the author

Vadim, in the last few days I have bought 4 SSDs to install on all my computers. Let's just say... life has changed :-)

After thinking for a long time whether to buy a laptop with an SSD or a hybrid drive, my friend decided against it, choosing 340GB + 24 SSD. Those were surprised that Windows 8 was installed as standard on a 5400 disk, and not an SSD. Having suffered for a long time, moving Windows 8 to an SSD, I was a little freaked out, because... I lost almost 3GB on the SSD. I know that over time the W8 will swell and will need to fight for space, turning everything back, transferring the TEMP and Page file to the SSD, plus installing programs that run often.

All the same, you just needed to buy a laptop with an SSD and not worry about it. They gave me an SSD for NG and now I’ll stuff it into an old netbook, install W8 and I’ll be happy.

Our entire section reads all the articles about SSDs.

Oleksiy

You, Vadim, have gone through the SSD myths wonderfully, you can be sure that there will soon be fewer SSD lovers. I have Win8 on an SSD, so having installed it that way, I’m happy and I don’t bother myself with all sorts of optimizations and any dubious ones.

PS: Power supply: 1Gb.

• Oleksia, for the vodguk. You can’t put your head on everyone, but I’m not trying to make a fuss :)

  The power supply is incorrect. How did you arrive before this?

madgrok

Before you buy your own SSD, read a mountain of forums, benchmarks, etc. And once you get back up, all things go into the firebox.
Are people still buying their own SSDs? Zvichaino scho shvidshe! :) And most of the optimization tweets basically bring back all the productivity gains that Vadim wrote about.
I use my Vertex 4256 GB as the default disk for the system. I bought it here in the spring. Active flight, 100% health
It’s a wonderful article, I recommend it to everyone we know, and to friends, before reading it, they didn’t suffer. :)
And I’m in love, thank you to the author for the wonderful blog. It is fitting that the topic is “painted over the brushes.”

Andriy

Vadim, finally, there are articles about the presence of SSDs on our computers, I think that this topic is still relevant - even those who are not going to hire a solid-state drive for a number of reasons - although they don’t want to install the sensor yogo on an old computer yuter-save for a new one, because at the point of testing-vlashtovuyu HDD, and the axis like Pavel Nagaev is long-sized, which will give advantage....
What would you like? How about transferring the OS to an SSD to “increase the system’s speed code”, so to speak?

Andre

Hello Vadim, I think a lot of people are wondering about buying an SSD, and it would be even cooler if you wrote an article on choosing an SSD!

Alexey Matashkin

Vadim, thank you for the article.
In my experience, I have never encountered these myths, only because I felt happy about the actions and was pleased to read them.

I’m not quite getting into the habit :) The main PC is not at home, but in a different SSD. And at home, everything is still out of the ordinary.

No need to add power, since I don’t use tweaks, all SSDs work in normal mode with the system.
An important detail I would like to mention is updating the firmware on the disk. In my experience, there are 3 types of serious failures caused by updated firmware versions.

Valentine

Pavel Nagaev,

Your 24 SSD is superior for all purposes for cache storage, because it has such a small size, you may need to consider it as a cache, in this case you take away the advantages of both devices - the convenience and speed of the robot. Vadim Do you have any statistics regarding hybrid hard or compact HDD and SSD? I think many readers could appreciate this article. I respect the topic about the 12 myths even in a funny way, since I have a lot of known fakers who respect themselves as fakers, but allow such pardons and impose these pardons on the most prominent prostitutes, who are always sent to This article could be revised to allow this kind of amends.

Vadims Podāns

The article is good.

Sergey

So, it’s amazing how people buy SSDs to speed up their work, and then transfer everything themselves, turn it on and spend more time on productivity.

MythBusters is right! It was a wonderful experience to go through all these myths.

Oleksiy G

I spent the first time falling into a deep sleep, and then regaining consciousness, which is not easy.
I'm taking marks 8.3. Because I'm trying out new versions of programs, and I don't need anything)

From life: when I pick up a PC from an SSD, I transfer my old files to the old one. If the PC, for unknown reasons (tyrant hands, viruses), is no longer capable of being used, then if I instruct, then I will update the adjusted image of the installed system (for the blog), if the person called another “master”, then we will format the disk first: (B in a more reasonable way in my place, it’s a pity that I didn’t register, so there’s no need to save the files of the correspondent.

Power supply: 2834MB?

Dima

Dyakuyu Vadim.
As soon as it became clearer and with a slight sense of humor.
Having promised, I easily part with the myths and lead them on the rest of the way. I’ll take everything back.
With respect to Dima.

PGKrok

Passable in all respects, but I myself had the opportunity to transfer the index files, part of the program and photo-video features to the HDD, because... SSD - only 60 GB (already narrowed down :))
For nutrition (before nutrition about “trimming pictures in the mind”)
Result CrystalDiskMarc (HDD)
http://pixs.ru/showimage/HDD1301020_6347406_6812031.png
Result of CrystalDiskMarc (SSD)
http://pixs.ru/showimage/OSZ3010201_4238885_6812055.png

controller SATA-3 SSD-SATA-6

Svitanok

Having bought a 60gb ssd, I lost Windows 8, program files, appdata, program data. Reshta on hdd.
Reason: the system partition is rapidly growing, so be surprised, the place is at zero.
There was only one requirement for the purchase: to speed up the system. What's your reach - 8 seconds.
Vadim, statya - zalikova, dyakuyu!

Rubin

About transferring TEMP and cache - transferring them directly to a gigabyte ramdisk - this is a real increase in speed, not equal to the SSD.

Denis Borisovich

I’ve been working in IT for a long time and I still can’t stop wondering how bad it is for optimizers.

My ssd on my home computer is already out of stock and everything is in a bundle. 7 starts in 10 seconds, the program can be used quickly and easily without any optimization. It’s a shame that the folder of necessary and important documents is not on the ssd (it’s 500 GB in size). And in the “My Documents” folder there is a lot of information to be found.

I, as a person very close to IT, am not in the grip of the innovations of the MS (only the inability to become a conductor without any help). I just want to know objectively that in terms of optimizing the operating system on the ssd and the stability of the robots, they definitely do well.

Rubin

Transfer the search index, and then write in the Windows application that it still lingers in memory, so there is no sense.

SuperFetch is required in any case, because it will store files in RAM later, with greater speed and a decrease in the number of files before storage.

Valery

Vadim, I regularly read your articles and often get stuck in practice because of them.
Having purchased an SSD (Intel 520 120GB), you will immediately read about all sorts of optimizations and actions, and then immediately lose the indexing and transfer it to the HDD and Intel’s recommendations for your disks and axes. And for the sake of this, Intel's recommendations diverge:
http://123foto.ru/pics/01-2013/42746566_1358157387.jpg
Who should you listen to?))

Oleksiy

Vadim Sterkin,

Priishov using the tiku method :-)
My swap file takes up 1 Gb on 16 Gb of RAM (size depending on the system). Moreover, the system monitor shows practically zero interest rate. You see, 8Gb holds at least 1Gb.

Oleg

Hello Vadim. I look forward to new articles from you, this article was very interesting for me and for my friends. It’s a pity that my evidence doesn’t reach my friends, because I think they trust the forums more than ever to write useful information.
I am sure that this article is being changed.

Check out the article about choosing an SSD.
Dyakuyu.

Georgiy

Thank you for the article.
To be honest, there is not much understanding about Superfetch - why does it have more speed code on SSDs?

As for the size of the swap file, the answer may be this: the row you see says 10.7 GB. For these figures, it is necessary to raise the OPP obligations.

Oleksandr

I recently bought a Kingston Hiper X 3K 120GB SSD. Having installed Seven sp1. The increase in the speed of the zavantazhennya and robotic program is not increased.
Front configuration: Asus P5Q, 2 WD 500Gb Raid 0, DDR2 2 1GB each.
My takeaway: when connecting an SSD to a “full” Sata 3Gb/s port, the increase in system productivity when installed on the strip is insignificant. Come upgrade to a motherboard with Sata 6Gb/s and DDR3 memory, if you want 8GB.

GlooBus

Pavel Nagaev,

The 16-32 GB SSD drives soldered on laptop motherboards are of no use. The best way to do this would be to take a laptop with a simple configuration with an HDD and do the upgrade yourself. I did this by taking an ASUS X301A with 2 GB of memory, 320 GB HDD and upgrading to 8 GB of memory and 128 GB SSD. Earning a laptop in a completely different way! Lock the computer by pressing the button until the password entry window appears for 6-7 seconds. Without clicking on any tweets, at least by turning on indexing, because... I don’t use search.

Alik

For days after installing VERTEX 4 128Gb on the new Win 8, stagnating the optimizers and already for a period of time I realized that it’s free, incl. have to install it again. And here’s another thing that’s boring.

Michal

Vadim Sterkin,

I think this has something to do with the fact that most people just don’t have enough specific experience with SSD technology like you do.
and there really are a lot of myths.
For example, I’m from the Republic of Uzbekistan, we still have SSDs here.
Unfortunately, there is still no work on them. those roads are even longer.
Having read your article, I realized that I transferred the download file for free.
so much for the article, I promise that I won’t stop :)

In this article we will talk about setting up SSD storage devices for the Windows 7 operating system. What you need to do and why you started setting up SSD devices in Windows 7 will be discussed below.

Well, recently my friend bought a hard-working computer. And for greater speed of operation, it was decided to install an SSD drive there for installation on a new operating system.

Let's figure out what the difference between an SSD and a basic HDD is. As Wikipedia tells us:

SSD - Solid-state drive (SSD) - a computer non-mechanical storage device based on memory chips. In addition, the SSD houses the controller that controls it.

In addition to SSD, HDD, this is storage on hard magnetic disks or HDD (English hard (magnetic) disk drive, HDD, HMDD), hard disk, in computer slang “Winchester” - device (saving information) with sufficient access, again on principle of magnetic recording. This is the main accumulation of data on most computers.

The main advantage of an SSD over a standard hard drive is the absence of mechanical parts (that collapse), which increases its reliability. Also, the advantage of SSD is that it is highly flexible, heats up less, and does not produce any sounds during operation. Although the SSD has a lot of advantages, it also has a few shortcomings. The main part of the SSD is the number of write/rewrite cycles. Primary (MLC, Multi-level cell, rich middle memory) flash memory allows you to write data approximately 10,000 times. More expensive types of memory (SLC, Single-level cell, single-level memory) – close to 100,000 times. In order to change the amount of storage required for an SSD storage device and, obviously, prolong its life, you need some fine tuning. Well, there’s one more shortcoming - the nonsense of older OSes (lower than Windows Vista).

Next, we'll look at what you need to do to configure a solid-state drive under the Windows 7 operating system. If I configured an SSD without taking screenshots, then I'll configure it on my old computer. yuteri zi zvichaynym HDD.

So let's go.

Point one: Turns on in deep sleep. It is necessary to turn it off for the same reason that every time the computer switches to this mode, a lot of information is written to the hard drive, and I turn it off again, because it is difficult to exit this mode. Before that, having turned on a deep sleep, we have enough space on the system disk approximately equal to the amount of RAM. Hibernation is required for the quick start of the operating system, but since we install SSD storage, Windows will start up in just 5-10 seconds. To enable deep sleep, launch the command line (Start - Viconati, here we write the command cmd). In the command row it is written powercfg.exe /hibernate off. After rebooting your computer, you will restore the space that has accumulated on the system disk.

Or go to “Start” - “Control Panel” - “Power Life” - “Adjust the power plan” - “Change life settings” - find the item “Sleep”, open it, item “Hibernation after”, enter the value “0”.

Another point: portable folder for saving timely files TEMP to a standard HDD.

For this, click the right button on the “My Computer” icon - “Power” - “Additional system parameters” - the “Additional” tab - the “Change middle” button - and change the way to change TMPі TEMP to another folder (I created it on drive D:\).

Point three: Turn on “System protection”.

To enable system protection, press the right mouse button on "My Computer" - "Power" - "System Protection" - "System Protection" tab - "Adjust" - "Turn on System Protection".

When system protection is turned on, we cannot update from a backup copy, otherwise we don’t need it, and the system can be installed in just 10-15 minutes.

Point four: We transfer the swap file to another hard drive. For this, press the right mouse button on “My Computer” - “Power” - “Additional system parameters” - the “Additional” tab - the “Swidcode” section - the “Options” button. Here you can change the parameters like a small one (depending on the free space on the D:\ drive, you can set more options).

Penalty point: enabling indexing.

Indexation is required to quickly search the disk. Well, for example, I’ve never been quick with a search, and even without it, searching on an SSD works great. Therefore, this option can be safely turned off. To do this, go to “My Computer”, press RMB onto drive C:, drop-down menu item “Power”. In the “Background” tab, uncheck the box “Allow files on this disk to be indexed in addition to file authorities.”

Or you can get indexing for all disks by enabling the WindowsSearch service. To do this, go to "Control Panel" - "Administration" - "Services" - find our service and click on it - select the startup type "Manually" and press the "Launch" button.

Item 6: switchable Preftch ta .

Prefetch is a technology that allows you to speed up Windows' ability to read data from disk. For an SSD it is not required, because SSDs have the greatest flexibility in randomly reading data.

To enable Prefetch, launch the registry editor (Start – Viconti – type regedit and press Enter). Next we open the registry tab:

HKEY_LOCAL_MACHINES\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters

And change the value of the Enable Prefetcher key to “0”.

RedyBoot is an add-on to Prefetch. In order to turn it on, we go by dosage:

HKEY_LOCAL_MACHINES\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot

Here we change the value of the Start parameter to “0”.

Punk somiy: transfer of cache add-ons. Here, in the first place, it is important to transfer the browser cache to another hard drive. I won’t describe how it works, because there is a different way for the skin browser. If you want to transfer the cache to another hard drive, then Google will help you. Well, I started without even bothering, even though we installed an SSD to speed up the work, but transferring the Cache to another HDD wouldn’t give us the speed. We are waiting for you.

It is also necessary to turn on defragmentation, and for Windows 7, under Vista, defragmentation, when installed on an SSD, is turned on automatically (the same write about Prefetch and RedyBoot, otherwise it was not set to "0 ", so check it out) .

That's all. On the Internet you can also find ways to optimize SSDs for Windows 7, but they are not as important as they are. However, the SSD is expected to last a long time without such tuning, but if you want to live out your life as much as possible, I recommend going through the above points. Plus, up to every possible place on the system disk, and the insurance of a gigabyte of memory for an SSD is entirely correct.

Just recently, all computers operated from HDD, with little speed and low efficiency. But they have been replaced by a new generation of storage devices, so-called SSDs, which are paying much more for their older counterparts. Like new buildings, the stench was expensive, and their services were not affected by the great locality.

Later, the growers began to increase their capabilities, and through competition, their creativity began to decline. One wonders what else the cross-country koristuvachev needs? Ale they have one person

ness: nadmirna rewriting data can lead you out of order. To avoid any inconveniences, you can adjust Windows 7 for optimal operation with an SSD, and thereby improve the service of the solid-state drive.

Is there a need to tweak the OS?

All flash drives have their own memory, it is based on microcircuits. They have all the same parts as on the HDD, so they are not afraid of hard impacts. SSD memory is made up of a lot of cores that can be worn out due to a high rate of rewriting.

And a very important point is that you need to configure the OS to transfer data to a flash drive, as well as callbacks to active services and operations on the storage device, rather than adjusting Windows.

The adjustment allows for a change in the vicarious space, the expansion to a new one, which will inevitably cause an increase in the term of service of the significant wearer. If the SSD is used in the primary mode, it can last for ten years, and if it is actively used, the term changes to 2 years.

To install Windows on your computer, you need to prepare the system. Let's verify:

1. We go to the website of the manufacturer of the computer and SSD, checking the relevance of the versions. If you intend to reflash it, you can erase all data and know about the trace before installing the OS. Find information about the update, download it to your computer;
2. We switch the startup of the system with the configured BIOS to AHCI, so that we install a significant amount of storage first. Try new modes to avoid glitches;
3. A significant nose may be formatted. You can vikorystuvat the windows, it will fit into these settings;
4. Next, check the connection of the system in this area, connect it, create new logical sections. If there were divisions before, then renew them, remove unnecessary divisions and divide again. Now install the latest version of the disk controller driver downloaded from the manufacturer’s website.

Video: Optimizing SSD drives

Enable services and functions

Be aware of the limitations of non-personal services and functions in Windows 7, which may even prevent you from starting the system from an SSD, so we will tell you how to enable them correctly, and which services it is not wise to enable. Some working services share a lot of computer resources, their inclusion allows you to speed up the start, and the work itself is of great use.

Indexing and Keshuvannya

To add the entry to the cache, do the following:

The option to create a write cache in Windows 7 gradually expands to the device's RAM, recording the most popular commands, and then they will be displayed on the main page. Ale SSD is richer than HDD, and this is the registration option.

Indexation is useful only for a working system with an HDD, but for heavy use it is not effective: it will not appear on the speed, and the disk will be much smaller, as long as the index data is constantly updated.

Enabling this function does not require access to the database, and therefore the connection operation will take place without delay before starting the system:

• my computer;
• kakopchuvach;
• power.

In the window that opens, select the checkbox for the “allow indexing” option, and if the system shows you in advance about the compilation, you do not need to turn everything back and still uncheck the box.

Defragmentation

We turn on defragmentation in automatic mode, this function is not required, it is not immediately possible.

Vikonuemo:

Hibernation

Windows has some useful energy saving functions: sleep mode and deep sleep. These functions are developed specifically for laptops, for which the energy saving mode is relevant.

Hibernation – this saves the computer data when it goes into hibernation mode, Windows writes it and saves it in the Hiberfil.sys folder on the HDD. When you exit this mode, all data is deleted, and the computer starts working from where it was started.

If you enable this mode, you can significantly increase the space, and if you start the system from a new one, there is no need for them.

The system will start up sooner, and you can enable it from the start menu:

After starting the service as the computer administrator with the right mouse button, the command line will open: enter:

After this, the service will be held.

System upgrade

Using this additional function, you can troubleshoot the system if any glitches have started. Windows creates update points and writes everything into a single file, which takes up a lot of space. You can enable this function, or, more simply, by enclosing the file assigned to the system update.

For whom we open the “my computer” folder:

Prefetch and SuperFetch

SuperFetch is responsible for caching the most popular files, and you do not need to enable this service to start caching.

The Prefetch service is responsible for importing programs into the computer's RAM, and in our case it is not disabled, and it is enabled:

Video: Setting up the disk

Moving the swap file

To complete this, if the OS is 32-bit, the swap file must be moved to another location, then enter a number of commands:

• Control panel;
• System;
• Dodatkovo;
• Shvidkodia;
• Parameters;
• Dodatkovo;
• Virtual memory

If you have 64-bit Windows installed on your computer with more than 8GB of RAM, you can safely enable the paging file option:

Is the TRIM function enabled?

Using the TRIM command, the OS transmits important information to the SSD about non-corrupt data blocks that can be cleaned by it itself. While the option to format and delete files can result in low storage productivity, this function allows you to change the number of unnecessary files and clean them up.

This is one of the most important commands, which must be enabled, otherwise the recording rate will be low, which will lead to a decrease in the functionality of the disk space.

To check that this function is disabled:

Tweaking Windows 7 with SSD disk, SSD Mini Tweaker program

If you are not a computer genius, but want to transfer the OS to an SSD, then use the small SSD Mini Tweaker utility. The program does not take up a lot of space, but copes with its tasks efficiently, and is relevant for those computer users who are planning to transfer the launch of a Windows 7 system in 32 and 64 bits to an SDD.

Once the program has started, it looks like this, and you can immediately adjust the necessary parameters.

You don’t need a lot of functions to transfer Windows; they can only interfere with the process itself:

The program will help you adjust about 13 parameters to increase speed when starting from an SSD. Meta-optimization aims to reduce the yield to a significant amount, which will prolong its usefulness.

Your operating system can be activated by running it from an SSD drive, and Windows 7 can be easily adapted to run from a solid state drive. In fact, if you have some energy-intensive programs installed, with proper optimization you can make them run from SDD, especially with Superfetch/Prefetcher and defragmentation.

If you have a large operational memory, then this is even better: you can further optimize it, which will bring you only to speed code and the trivial term of service of a significant wearer.

Accumulative solids are becoming cheaper every day, and it is expected that this trend will not change.

Many new models of computers now have their own type of storage; manufacturers themselves have optimized the operating system for efficient operation of solid-state storage.

Of course, you need to choose the optimization method yourself, and we are left with the most important thing to do without wasting important data when migrating the system to an SSD.

compsch.com

How to set up SSD storage for Windows 7

For rich PCs, replacing your hard drive with an SSD hard drive is the most effective PC upgrade. In addition to reading information, the SSD storage device increases significantly, and the productivity of the computer also increases significantly. However, there is one drawback - the reduction of a number of rewrite cycles, which is typical for flash drives.

Configuring an SSD for Windows 7 is necessary because it is necessary to reduce unnecessary write cycles to flash memory drives to a minimum in order to increase the service life of the solid-state drive.

If you have Windows 10 installed, it will automatically detect SSD storage devices and make adjustments to its work to achieve maximum productivity. Therefore, on Windows 10, setting up an SSD is not so important and is equal to the operating system.

Disk defragmentation problem

During the defragmentation process, blocks of data are logically interconnected, scattered throughout, and re-arranged in the same sequence. SSD drives do not require defragmentation. While defragmentation can improve the efficiency of hard disk drives (HDDs) and thus speed up the operation of the PC, then with an SSD this process can be very harmful.

Useful functions of Perfetch and SuperFetch

The Perfetch folder is intended for quickly setting up Windows and launching programs. The folder contains information about frequently used programs on the computer and saves them on the outer (system) part of the hard drive.

The SuperFetch service monitors programs that you frequently use and installs when you start your computer into random access memory (RAM), so that when they are downloaded, they are launched more quickly. Thus, when you launch the program, the computer begins to read files from the RAM, below the hard drive.

In view of the high readability of solid-state storage devices, their functions are compelling.

To enable them, go to the Windows Registry Editor with administrator rights.

In the “HKEY_LOCAL_MACHINE” directory, find the “SYSTEM/CurrentControlSet/Control/SessionManager/MemoryManagement/PrefetchParameters” key and change the “Enable Prefetcher” and “Enable Superfetch” values ​​to “0”.

Vimknennya ReadyBoot

ReadyBoost speeds up Windows and works simultaneously with the SuperFetch service. While SuperFetch uses program files to be stored in random access memory (RAM), ReadyBoost uses flash storage as cache memory for a large hard drive.

To use ReadyBoost you need to cancel the following actions:

• Start;
• Control panel;
• The system is safe;
• Administrative tools;
• Productivity monitor;
• on the left side, expand the section “Groups of collected data” and select “Sessions to start”;
• both click on “ReadyBoost”;
• Stitching session;
• Uncheck the box that says “Notified.”

Uninstall or move the swap file to the hard drive HDD

The swap file increases the size of the computer's cache. Unfortunately, if the RAM memory is not physically available, the Windows operating system moves some of the data from the RAM and, thus, avoids the software or system.

If the computer is equipped with a small SSD or traditional HDD, the swap file can be placed on the SSD. If you have windows x64 installed, you can install the swap file.

TRIM function

In the Windows 7 operating system, it is important to check whether the TRIM function is enabled. It is important that this function informs the SSD drive that the area on the disk is no longer corrupted and can be cleaned. If the function is disabled, this can lead to a decrease in the productivity of the solid-state accumulator.

To check:

• go to the command row under the name of the administrator;
• enter the command "fsutil behavior query disabledeletenotify";
• If, after dismissal, DisableDeleteNotify = 0 appears, then the service is disabled.

Follow your sleep schedule (deep sleep)

The deep sleep function clearly speeds up the hour required for the Windows operating system to start from the hard drive. SSD storage devices paired with hard drives read information faster over the course of an hour, making the startup process significantly shorter. Therefore, the deep sleep mode in computers with SSD does not bring any significant benefits and can be turned on.

When switching to sleep mode, all data from the RAM is saved to the hard drive in the hiberhil.sys file, which can reach a decent size. This is especially true for small SSDs; turning on sleep mode frees up valuable space on SSD storage.

To turn it on, use the Win+R key to launch the command line under the administrator name and type the command “powercfg -h off”.

AHCI mode

For full operation of the SSD storage device, including using the TRIM function, you need to enable AHCI mode in the BIOS. If you simply change the mode, then after turning on the windows installation process may be interrupted by a crash (blue screen).

For correction:

• go to the windows registry editor using the administrator name;
• find the entry “HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Msahci” or “HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/lastorV”;
• Click two buttons on “Start” and change the values ​​to “0”;
• restart your computer;
• Change the BIOS SATA controller mode to AHCI.

InstComputer.ru

Customizing Windows 7 for optimal work with SSD storage

Here I can’t explain what an SSD is and what is the shortest/largest hard drive. I recommend that you first read the previous articles on this topic, which talk about the combination of SSD and HDD storage for setting up a computer and recommendations for installing MS Windows 7 on an SSD. We are glad to hear these articles - Windows 7 can already “fly” on your PC from an SSD. You won't be able to speed it up even more after optimizing a wide range of system functions, the results of which will have a much greater positive effect on HDDs and even newer SSDs. About these possibilities can be found in the 4-part article “Adjusting Windows 7 from A to Z.” In this article, I want to describe the manipulations that will help you prolong the life of your solid-state storage device (by changing the focus on the new one) and save approximately 5-10 gigabytes of space, as in our case Much more important. Today all changes are made manually. If you don’t care about the process, download the SSD Tweaker (Pro) program, which will create versions 3,5,6 for you. And much more... What are we working on today? Short axle:

• 1. Transfer the swap file to another disk (HDD)
• 2. Turn on the system update point
• 3. Use the indexing function
• 4. Enable the defragmentation service
• 5. Let's understand the Hibernation function
• 6. Enable Prefetch and Superfetch

Perche. Transferring the swap file will increase the amount of free space on the SSD itself as much as you can import the entire file. Don’t forget to lie on the HDD, where the place is richer (moreover, the download file is only downloaded when there is a shortage of RAM and a 5% addition is required). We go through the "Start" route - right click on "Computer" - "Power" - select "Advanced system parameters" and look at the three screenshots (stealing from our other statistics): As a result, our swap file will become active of a hefty size, so conquer it with constant fragmentation; and will be saved on another disk (not SSD).

Friend. The system created a point of renewal. I don’t know for anyone, but in the past it would have been easier to install a fresh operating system in an image, just to remember where the update was 100% working. But with an SSD, everything is much more categorical. The function of the creation point of update MUST be turned on. Around this time, it became clear that when the update point is turned on, the “TRIM” function, which is important for the SSD, is blocked. Therefore, there is a gradual degradation of the fluidity of the accumulator. Well, there are two additional factors - finally, a change in popularity and a greater amount of free space on SSDs. Let's take the first route: "Start" - right click on "Computer" - "Authority" - then select "System Protection" and see the next screenshot:

Third. The indexing function was created to speed up searches in Windows. What this does is that, during hours of inactivity, the operating system checks, updates and saves indexes for all files on your disks so that it can more easily display the results of possible search queries. The demand on the disk itself increases (in fact, the hour of demand increases) and the index files themselves take up their place in the new one. I searched for windows and didn’t scab, but it’s always a high-speed SSD, this function simply has no sense. Open "Explorer" and right-click on the SSD - "Power" - uncheck the box next to "Allow files to be indexed instead of files on this drive"

Fourth. The defragmentation service is not required on an SSD (as is the case with any other operating mechanism, such as the HDD) and is contraindicated (the NAND memory stored in the SSD is subject to a large number of rewrite cycles). It happened in such a way that Windows 7 deprived this function of being enabled (when the operating system is installed on a solid-state non-copy device, the defragmentation service is turned on after installation) - we go through the route: "Start" - "Viconty" - enter "services.msc" (without legs), Look for the "Disk Defragmentation" service in the list, click on it, select "Enabled" in the "Startup type" field, press in the order "Zupinity" - "Zastosuvat" - "OK".

P'yate. Hibernation. This function is no longer required for a dedicated HDD, but is especially important on laptops. This is a kind of “deep sleep mode”, in which everything in the RAM is written to disk to speed up the system’s further recovery. For SSD, this is not relevant, and besides, turning on Hibernation means that the disk space is close to 2 GB per month... We press “Start” - “Viscont”, enter the text “cmd” (without pads), and write the command “powercfg -h off” in the window ( without paws), emboss the "Enter" button.

Shosta. Prefetch - Transfers frequently used programs and libraries into RAM. With a dedicated SSD, there is no noticeable increase in productivity. When switched on, the space at the OCP increases and the number of drinks before accumulation is shortened. Superfetch is a file cache that is often vikorized. On SSD it’s absolutely marginal. To enable both functions, go to "Start" - "Viscont" - enter "regedit" (without paws), in the windows registry editor go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\Prefetch: "EnablePrefetcher", "En ableSuperfetch ", select "Change", enter the number "0":

rapidsoft.org

Setting up SSD for Windows 7 - optimization, program, TRIM

Windows 7 was not originally designed for use on SSDs. From the moment they appeared, Microsoft released numerous updates to improve the operating system on solid-state drives. However, it is necessary to carry out additional optimization manually, which gives a much greater effect.

SSD-storage

Solid State Drive is a memory device that is based on flash memory and a controller that controls it.

The stench is widely discussed in computing technology and there may be several advantages over HDD:

• high fluidity;
• impact resistance;
• heat resistance;
• small size and size;
• noiselessness.

In Windows 8 and above, they work stably and smoothly, but when running older operating systems, there will inevitably be problems with data and error code. To achieve this, you need to optimize the parameters that this article is dedicated to.

What does optimization provide?

Windows 7 has a number of services that increase the productivity of your hard drives. If from the SSD the stench does not only not bring coristi, but if you respect the robots, you will definitely lose the term of service to the device. Setting up Windows 7 on an SSD will start again, all OS tests will protect it, and allow you to achieve greater productivity.

If you match the maximum stated read/write speed by the manufacturer, the difference will be significant.

The linear fluidity of solid-state accumulative materials is 3-4 times.

A basic hard drive can rarely demonstrate a read speed of 180 MB/s. In this case, you don’t spend an hour moving the head, but focus on reading the data.

For a primary SSD, such as the Kingston SKC380S3, the limit is 550 MB/s. for reading and 520 for writing. In linear reading mode, it scans all channels and reads data in large blocks. However, once a deeper analysis of productivity is carried out, the performance of solid-state accumulators will be even more hostile.

When testing the speed of reading blocks of 512 KB (small files), the gap becomes even larger. The SSD does not spend many hours searching for the block, and as a result, the speed is still lost in the range of 500 MB/s. The hard disk spends more than an hour moving the head and less than reading files. Its speed decreases three times and reaches an average of 60 MB/s, which is 8 times higher for an SSD.

Photo: reading test for large blocks of 512 KB in size

If you still bother with the test and check the speed on 4 KB blocks, then the SSD will outperform the hard drive 50 times. Backup of the OS, copying of documents, other images and launching of programs – all indicate this mode of operation. In addition, solid-state drives can operate simultaneously with multiple power supplies, while HDDs are single-threaded.

Video: how to properly set up a robotic system

Setting up SSD for Windows 7

This process requires patience and includes the following procedures:

Setting up Windows 7 for SSD starts with the firmware of the driver. All software companies regularly release new versions of software for their devices, which contain the weaknesses and weaknesses of previous versions. You can attract it from the official websites of the brand. The software package also includes instructions for how to install and update the firmware.

AHCI and TRIM

The SATA interface has many functions to speed up data exchange. In order for them to become available, you need to enable the AHCI controller, since most PCs are already configured to work with an older ATA controller. You can switch to AHCI either automatically or manually.

Automatic muttering:

Before the start of Windows 7, start working on it yourself. If for some reason the utility does not work, you can do everything manually.

Manual muttering:

After re-enablement, the AHCI controller will be visible in the device manager.

The AHCI is finished, the TRIM command is on. This helps the OS to inform the SSD which data the file system should not store and which storage can be deleted. This team cleans up the waste and does not allow it to reduce the level of productivity.

You can turn down TRIM if you have enough brainpower:

• The solid state disk controller supports this command;
• Selected SATA mode: AHCI.

Once the brains are finished, you can move on until TRIM is turned on:

Vimknennya zakhistu system

The instructions for feeding are simple:

It is important to understand that if you enable the protection, the OS will not work with update checkpoints and if it fails, it will be impossible to go back to updating windows. Therefore, it is possible to quickly use software from other vendors to provide the update function, for example, Acronis True Image.

Disk indexing

Indexing is carried out in order to speed up the process of finding the hard drive. There is no need for an indexing service or an indexing service for the SSD and the speed of the SSD.

We turn on the search like this:

Indexing is enabled as follows:

1. Open "Computer";
2. stamped with the right mouse button on the section -> Power;
3. at the very bottom of the window we add the sign “allow indexing...”;
4. The window gets stuck and closed.

It is also possible to enable defragmentation there, which can be done on SSD drives through quick access to the middle.

You can get it:

Vymknennya swap

The swap file is necessary for robotic programs that require a lot of memory. If there is no RAM available, the hourly data will be transferred to this file. You can only turn it on if you have sufficient RAM installed on your computer (at least 8 GB). Otherwise, it is better to transfer the download to another partition, such as the hard drive.

Vimknennya:

Vimknennya deep sleep

Hibernation or deep sleep of the computer was invented by Microsoft in order to prevent the computer from spending a lot of hours on startup. This function allows you to turn on your computer without closing the program. When the robot is further awakened, all programs will continue.

At the same time, when the PC is locked up, a large amount of data is written to the accumulator and the SSD wears out more and more. Also, rich people don’t need deep sleep, since a PC with a solid-state drive is very popular.

If you wanted to turn on deep sleep, then you can do it like this:

SSD Tweak Utility

To automatically optimize the system for your SSD storage device, you can quickly use the SSD Tweak Utility. The program allows you to quickly and easily get everything that was posted above, except for turning on the AHCI mode. The program is viewed using a different set of tools.

Є cost-free version with a basic set of functions:

• enable defragmentation;
• connection to update;
• Indexing unit.

The paid version of Tweaker Pro has other functions available:

1. enabling and disabling services;
2. adjusting parameters for deep sleep;
3. revision and experimental optimization of the TRIM command.

The program can be more customized, as it includes many more parameters. After launching the program, you can view a report on the right side of the window to help set up the system.

To start optimization, press the big button in the middle of the program window - auto-adjustment configuration. The utility itself adjusts the basic parameters and gives a sound.

Setting up and optimizing Windows 7 under an SSD is not a quick process and is accompanied by a number of system reboots and visits to the BIOS. However, if you do not carry out adjustments and do not enable unnecessary services, then after a few months the Swedish SSD may exhaust its supply of write cycles and stop working.

Do you need a USB WIFI adapter for your LG TV? Find out how to choose here.

Why shouldn't the laptop have wifi? All the evidence is here.

proremontpk.ru

How to optimally configure SSD storage under Windows 7

In this article we will talk about setting up SSD storage devices for the Windows 7 operating system. What you need to do and why you started setting up SSD devices in Windows 7 will be discussed below.

Well, recently my friend bought a hard-working computer. And for greater speed of operation, it was decided to install an SSD drive there for installation on a new operating system.

Let's figure out what the difference between an SSD and a basic HDD is. As Wikipedia tells us:

SSD - Solid-state drive (SSD) - a non-mechanical computer device based on memory chips. In addition, the SSD houses the controller that controls it.

In addition to SSD, HDD, this is storage on hard magnetic disks or HDD (English hard (magnetic) disk drive, HDD, HMDD), hard disk, in computer slang “Winchester” - device (saving information) with sufficient access, again on principle of magnetic recording. This is the main accumulation of data on most computers.

The main advantage of an SSD over a standard hard drive is the absence of mechanical parts (that collapse), which increases its reliability. Also, the advantage of SSD is that it is highly flexible, heats up less, and does not produce any sounds during operation. Although the SSD has a lot of advantages, it also has a few shortcomings. The main part of the SSD is the number of write/rewrite cycles. Primary (MLC, Multi-level cell, rich middle memory) flash memory allows you to write data approximately 10,000 times. More expensive types of memory (SLC, Single-level cell, single-level memory) – close to 100,000 times. In order to change the amount of storage required for an SSD storage device and, obviously, prolong its life, you need some fine tuning. Well, there’s one more shortcoming - the insanity of older OSes (lower than Windows Vista).

Next, we'll look at what you need to do to set up a solid-state drive under the Windows 7 operating system. If I set up my SSD without taking screenshots, then I'll set up the setup on my old computer. yuteri zi zvichaynym HDD.

So let's go.

Point one: turn on deep sleep. It is necessary to turn it off for the same reason that every time the computer switches to this mode, a lot of information is written to the hard drive, and I turn it off again, because it is difficult to exit this mode. Before that, having turned on a deep sleep, we have enough space on the system disk approximately equal to the amount of RAM. Hibernation is required to quickly restore the operating system, but since we install SSD drives, Windows will be restored in just 5-10 seconds. To enable deep sleep, launch the command line (Start - Vikonati, here we write the cmd command). In the command line write powercfg.exe/hibernate off. After rebooting your computer, you will restore the space that has accumulated on the system disk.

Or go to “Start” - “Control Panel” - “Power Life” - “Adjust the power plan” - “Change life settings” - find the item “Sleep”, open it, item “Hibernation after”, enter the value “0”.

Another point: transfer the folder for saving time-consuming files TEMP to a standard HDD.

For this, right-click on the "My Computer" icon - "Power" - "Additional system parameters" - the "Additional" tab - the "Change Media" button - and change the path to change TMP and TEMP to another folder (I created I'm far away on drive D:).

Point three: turn on “System protection”.

To enable system protection, press the right mouse button on "My Computer" - "Power" - "System Protection" - "System Protection" tab - "Adjust" - "Turn on System Protection".

When system protection is turned on, we cannot update from a backup copy, otherwise we don’t need it, and the system can be installed in just 10-15 minutes.

Point four: transfer the download file to another hard drive. For this, press the right mouse button on “My Computer” – “Power” – “Additional System Parameters” – the “Additional” tab – the “Swidcode” section – the “Options” button. Here you can change the parameters like a small one (depending on the free space on the D:\ drive, you can set more options).

Fifth point: enable indexing.

Indexation is required to quickly search the disk. Well, for example, I’ve never been quick with a search, and even without it, searching on an SSD works great. Therefore, this option can be safely turned off. To do this, go to “My Computer”, press RMB onto drive C:, drop-down menu item “Power”. In the “Background” tab, uncheck the box “Allow files on this disk to be indexed in addition to file authorities.”

Or you can get indexing for all disks by enabling the WindowsSearch service. To do this, go to “Control Panel” - “Administration” - “Services” - find our service and click on it - select the startup type “Manual” and press the “Launch” button.

Point six: enable Preftch and RedyBoot.

Prefetch is a technology that allows you to speed up Windows downloads before reading data from the disk. For an SSD it is not required, because SSDs have the greatest flexibility in randomly reading data.

To enable Prefetch, launch the registry editor (Start – Viconti – type regedit and press Enter). Next we open the registry tab:

HKEY_LOCAL_MACHINES\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters

And change the value of the Enable Prefetcher key to “0”.

RedyBoot is an add-on to Prefetch. In order to turn it on, we go by dosage:

HKEY_LOCAL_MACHINES\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot

Here we change the value of the Start parameter to “0”.

Somy item: transfer of CASH add-ons. Here, in the first place, it is important to transfer the browser cache to another hard drive. I won’t describe how it works, because there is a different way for the skin browser. If you want to transfer the cache to another hard drive, then Google will help you. Well, I started without even bothering, even though we installed an SSD to speed up the work, but transferring the Cache to another HDD wouldn’t give us the speed. We are waiting for you.

It is also necessary to turn on defragmentation, but for Windows 7, under Vista, defragmentation, when installed on an SSD, is turned on automatically (the same write about Prefetch and RedyBoot, otherwise it was not set to "0 ", so check it out) .

That's all. On the Internet you can also find out how to optimize SSDs for Windows 7, but they are not as important as they are. However, the SSD is expected to last a long time without such tuning, but if you want to live out your life as much as possible, I recommend going through the above points. Plus, up to every possible place on the system disk, and the insurance of a gigabyte of memory for an SSD is entirely correct.

) It’s not enough just to connect and work. Of course, you can earn money like this, or better for it correctly configure Windows 7, and even buy them in advance in order to install the OS on them (about this need it was written in the article for the above). These adjustments will not only improve your productivity, but also extend your disk service life.
How to set up an SSD on Windows 8 is written in statti.

Installing an SSD on your computer.
You must connect the drive as a primary device. You just need to know the required socket for connection =)
If the required socket is not available, look for the adapter in the box with the disk.
If there is nothing there, then I “vain” - your motherboard cannot “receive” it. And here you don’t have to buy either an adapter or a new motherboard along with all the components (otherwise it may be absurd).

Customizing the SSD drive for better productivity.

1) Firmware update.
Everything is simple here. The newer firmware on your device improves your productivity. This is logical for all devices. The firmware must be downloaded from the official website of the disc manufacturer. Call for vikoryism from the viewer.

2) Activate AHCI mode.
Everything is simple here. We go to the BIOS and set the AHCI mode for the Sata controller.

3) Checking disk connections.
Let's go as soon as possible My computer And it’s surprising that the middle of the disks is your SSD. If so, then everything is fine, and it’s clear.
When your Windows 7 drive is detected, it will automatically enable the SuperFetch, PreFetch, ReadyBoot and functions under Windows 8. SSDs are not needed, but they can damage the disk.

To check and/or enable functions Prefetchі Superfetch required:
- Open the editor using the command regedit.exe
- go to section HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters
- check the key values: EnableSuperfetch=0, EnablePrefetcher=0
- if the values ​​there are not 0, change them to 0 and check again

Then, if you want, you can download the program and check the size of your disk.
Zokrema, you need to check the rows:
Liquidity of wrapping- guilty buti SSDі Possibility- may be the word TRIM.

4) Portable swap file.
The paging file is a space reserved by Windows on the disk (in our case, SSD), which replaces the RAM in the event of a shortage. Add 10% of the logical disk.
The paging file has its logs updated every time, and the data is overwritten without unnecessary cycles.
It's easier to run Windows on an SSD with a lot of RAM (4 GB or more). If the amount of installed RAM is high, the paging file is not required at all, because Physical memory is managed by the robotic system. Before that, the RAM capacity of the hard drive is much lower.

RMB on My computer- Authorities - Additional parameters of the system - Dodatkovo
In the row "Shvidkodia" is embossed on the button Parameters. Selectable section Dodatkovo and embossed on the button change.

Here you can either put a value Maximum size the same as on Pochatkove significance, or you would like to put a tick Without swap file.

5) Enable indexing.
For SSD this is a superb function. There is a way to uncheck the “Allow files on this disk to be indexed” checkbox in the disk authorities.

6) Turn on the created update point.
“Rich” is no longer required for an SSD.