How to connect the hard drive from the laptop to the computer. Connecting a hard drive from a laptop to a computer. Yak insert the hard drive from the laptop into the system unit

If your laptop is not updated, but hard drive from a new cell, then you can throw off this information on a special stationary PC. For all the nobility, it is necessary to connect the hard drive of the laptop to. First of all, you will need to be of the first type, and then you will be able to see it on your stationary system permanently or to play the role of a time-based option. Vyhodyachi z tsyogo є different ways connect, tell about them in order.

How to use hard drives in laptops?

Modern laptops are selected with two types of storage for information - HDD and SSD. The first are similar to the standard hard drives for PC, only small size, And others may see a small pay. Most often in laptops, the following types of accumulations are used:

1. IDE (PATA) - vikoristovuvavsya on laptops, selected for 10 years. The main reason for this is the sheer volume of flowers and roses for the trail of exchange of data. Harchuvannya go through a 4-contact maidanchik. Infected even more foldable to know the motherboard, since we will adapt the IDE interface, so to connect such a disk, you will need to use a SATA adapter.
2. SATA is the most popular interface. For the connection of the vikoristovuyu maydanchik with 7 contacts, and for the transfer of donations won trokhs up to 15 roads. The motherboard can be used in a large variety of interfaces, so this kind of HDD can be installed in the capacity of another, it can be connected on a permanent basis from a difficult warehouse.
3. mSATA - miniature SSD, vikoristovuvani on modern laptops. Yogo rose'єm similar to mini PCI -e, ale the stench, do not go crazy with food. Before the stationary annex, it’s hard in most cases to connect only for an additional adapter for the motherboard, so as desktops began to equip such annexes with memory just recently. The stench became more and more widening by the end of the hour;
4. M 2 - one more miniature SSD version, used in Ultrabooks. There are three types of connection of such drives. Їх razrіznyayut according to the news on the contact area:
   • В - virіz roztashovaniye on the left edge, in small maidanchiki 6 contacts;
   • M - viriz of razmischeniy right-handed, small platform MAє 5 contacts;
   • B&M is a universal option with two rooms.

The remaining type of SSD can be used for any pink motherboard of an ultrabook, and the axis to a stationary PC can be brought via an adapter. The slots for the M2 interface on motherboards for desktop systems cannot be used.

The type of disk connection is selected from the interface. Wine is also injected into the type of victorian wear - permanent or time-consuming. In the case of a permanent structure, it is recommended to vibrate SATA or PATA. Reshta options are not available for team-hour transfer of files.

How do you fit a laptop hard drive into a desktop case?

If you will connect the HDD in the capacity of another, then you need to know correctly for a new place in the middle of the case. Know the cries and wonder in the middle. Know one of the most suitable options for HDD distribution:

1. Install it in the cat 2.5 ". It is located in a special building, in the middle part.
2. Use the adapter for 2.5 "drives, so you can change the adapter to a standard 3.5" drive. In the middle of the body, the adapter is fastened with gwints, which will help the disc to read the video. Infected adapters for more modern compact noses 1.8 ".
3. Since your PC doesn’t have many disks (dismantled or not transferred to the design), then you can place the nose on the bottom of the system unit. Ale in front of the front to put on the HDD gumy kilimok, for example, a part of the old vid computer mish... Tsey sposib do not go for post-vikorystannya Tom, in a dozen hour, you will need to pick up a standard cat.

Save it, connect another hard drive of the laptop to the computer, as a result compact size, Tobto є small die. SSD up to mother's pay Connected via adapters, which are most often the USB interface. This type of plug-in allows you to use a dodatkovy grasp only in times of consumption, transforming it into a mobile nose. On one side there is a victoriannya - crazy awesomeness hard drives And from іншого - a great short-lived, if you check to save on the new program, and then forget to plug them in, then you can’t start it, you won’t be grateful.

Before connecting any kind of information to the motherboard, you need to start the PC. If you are using e-SATA mobile ports or USB, if you do not need to open the case, then you do not need to pick up a PC.

Connecting HDD with the same interface as a PC

Before you connect the hard drive to your computer, check out that you will be victorious - permanently or temporarily. On a permanent basis, SATA and IDE plug into the middle of the case. The most sophisticated version of the installation of a pre-installation schematic, it is necessary for the nobility to attach the mother's pay and intelligence, to bring the darts.

1. Prepare two hard drive cables - wide and thin. The transmission of the tribute is seen through the thin one. If you have a stale version of the motherboard of the board, then speed up the Molex-SATA adapter. One end of a thin cable will be stuck at the external roses on the HDD, and the other will be installed on the motherboard. It is not easy to know the need for a lot of money: put 3-4 straight-line contact maidans in a row; Choose whether from them, the sheer speed of transmissions does not pour in tribute.
2. The old hard drive is connected via a power cable and a 40-pin IDE cable. For new wrinkling, you also need Molex adapters and adapters. The peculiarity of this disk is that it can be built up early, so that the PC will not be able to use it, but simply display the information. Struggling for the help of a link on one of the contact majdanchikiv. It is necessary to install a jumper on the contact contact, so that the PC command can be read correctly. You can also set the jumper so that the leading and the soft disks were started with a cable. At the same time, the disc that will be connected to the middle pin plug, not participating in the locked stationary computer.

rashta options for hard disks can be connected to a PC only through adapters. If you have a modern motherboard, then there can be additional roses for SSD and M 2 on them. The plug-in device is easy to use, it’s enough to roztashuvat the board in the required slot.

If you want to install the hard drive on a permanent basis, you can choose the SATA - IDE adapter. Vin allows you to install the connection of the old model to the motherboard, and also to install the return connection. You can read the information from your nose, as well as vicariously you permanently.

Is it possible to connect to the motherboard through the adapter?

Another class of adapters is USB adapters. The stench will remake SSD or HDD into a USB flash drive. The first adapters are available for SATA drives, and they also call these hard drives. The stinks were boxing, all around the hard drive. It is connected to a PC using an additional cable. Infected part of the hard disk drives using this scheme. If you have such an attachment, you can replace the case and replace the HDD there with a version of your laptop. Whole enough, you need to take into account the information or to throw off the files you need for a backup. In this way, it is also possible to change the availability of disks from laptops.

At computer stores, you can also install adapters:

• mSATA - USB;
  mSATA - USB

  

  You can also configure adapters that allow you to connect your SSD to SATA. On a skin day, the wines of the computer spare parts become more and more wines, the stench will help to know the solution for quiet, but there are no old computers of the old configuration. It is even more important for small computers, even office and home systems are often already very old, and HDDs with older interfaces are gradually becoming known for sale.

  Now you know how to connect a hard drive from a laptop to a computer. If you want to eat, you can ask them at the comments, and also go there corny information and their own histories. Ask your friends before discussing.

  
  

Corridors of personal computers, laptops and netbooks, often need to be connected to a computer for additional outbuildings... One of these attachments є callous hard disk.

The need for a connected disk may be tied to the transfer of significant numbers of files to the laptop, exchange of information with other attachments, or organizing a call-to-order collection of data. Inodi at koristuvach just to lose an old hard disk, like vin man namir prodovzhuvati vikoristovuvati.

Change in size, modern laptops include in their design the versatility of accumulating various types.

Scheme for connecting a hard disk to a PC

Laptops are prone to use 2.5-inch hard drives, because they stink less for sizes and live less energy, less 3.5-inch storage, which is installed in desktop PCs. However, a 3.5-inch drive, from an old PC, may be successful because of the success of the winners.

Croc 1. Turn on the computer and turn it on from the 220 Volt power supply, just do not turn on the PC if you know the hard drive.

Croc 2. View the computer case, most often seen from the right side panel (looking from the side of the PC roses) by pushing the screws or pushing the buttons against the panel members to the back side and sideways.

Croc 3. Know the hard drive inside the PC case. The hard drive is a straight-through metal box with a size of a small book and fit into a special view of the PC case.

Croc 4. Hard disk drive connections to a PC with two cables. Carefully look around the cables and carefully twist them through the roses.

Important! Dії on dismantling viroblyayutsya with deyakim, albeit not with significant zusillas. Before the nobility, it is necessary to respectfully look around the detail and take a general decision about the method of dismantling.

Croc 5. Look at the way of mounting a hard disk, і, vibrating the new method, taking it. The disc can be fastened with gwints or in the case on special "sanchats" with suction from the sides, hanging through the front panel to the body.

Connecting a call disk to a laptop

For connection callous hard disk perche, but it is necessary to change - the value of the size.

Croc 1. As far as the size of accumulative nevidomas is concerned, the width can be changed. Hard discs have a straight-cut shape, and their width is the initial size (form factor) in the name. The width of the 3.5-inch drive becomes 10.2 cm, and the width of the 2.5-inch is 7 cm.

Vimiryumo the width of the hard drive, the width of a 2.5-inch drive is 7 cm, a 3.5-inch drive is 10.2 cm

Croc 2. It is necessary to determine the type of connection of the hard drive, to add the case, to the service "adapter" for connecting the drive to the laptop. Older computers have hard drives with IDE connections, in our days they have drives with SATA connections.

View the type of HDD contacts. Rose IDE is stored in two rows of metal pins for transferring tributes, as well as a rose-colored hard disk drive. Rose SATA include in the design of two small squares with flat contacts for the transfer of money and life of the accumulator.

Croc 3. Add a case that adapts to the size and type of HDD connection, as well as the type of connection to the laptop. For example, add a 2.5-inch case with SATA connections for a 2.5-inch SATA drive.

Most cases of hard drives may be connected to a computer with a USB 2.0 interface, as well as FireWire, some of the stinks are very popular. Deyakі unіversalny hulls and can combine both options in the interface.

Lots of USB 2.0 enclosures come in handy with any kind of USB port in a laptop or a netbook. However, the case, lacking the USB 3.0 interface, will provide higher productivity when connected to a USB 3.0 port.

Dovidka! All are on sale today personal computers are equipped with USB 3.0 ports, so you can add a hard disk case with a USB 3.0 interface, changing it to a pink type on a laptop.

It is also important to be able to use the 2.5-inch case to be able to access the life from the USB-port (port) of the PC, and they do not have any adapter to carry around.

With a total of 3.5-inch hard drives, you will need a lot of handling, so with these cases you need to supply an adapter for handling zminny struma, Scho means, that the stench will not be pratsyuvati there, de nemaє sockets of vitality.

Croc 4. setting hard disk in the first case is even simpler. Call the maximum, which is required in a wide variety of ways, a price tag. Most often, it is necessary to take the upper part of the case, insert it into the new hard disk parallel to the base, and carefully slide the disk onto the contact pad for its connection. Close up the hard drive case (marvel at the photo).

Dovidka! To connect the hard drive to the case, you need to screw it up before the instructions, which are supplied with the HDD case.

In some cases on old 3.5-inch disks, you can change the changeover, or insert the hard disk in the capacity of the Master or Slave, before the construction of the case.

It is also a flexible option for connecting a 3.5 and 2.5-inch hard drive to a special docking station. It is necessary to carefully insert the disc into the whole vipad at the top of the rose, pushing it on top of the top, so that it is necessary to make sure that the disc contacts the station.

Croc 5. When connecting a hard drive to the case, you need to connect the case with a laptop special cable, Scho ide in komplektі.

For Tsiogo:

Keep in mind! For feeding the hardened hardware onto a 2.5-inch hard drive, there is also an option to connect another USB-rose, which is wired onto a cable, which is included in the package with the case.

There are a lot of special cases for connecting a hard drive, and a powerful and flexible option for connecting a HDD via a special adapter, so you can hope for a good one.

Connecting the "old" drive in Windows

Yaksho hard drive before it is connected to Windows OS, which means that it is already in the format. In general, when connected, the letter will automatically be assigned to the system, and it will appear in Windows Provider, Already ready to get stuck.

If the disk has not appeared in the system, you may need to install a driver for the hard disk case.

Croc 1. Draw on the "Win + R" keyboard. At the launch of the Viconati window, type “devmgmt.msc” and press “OK”.

Croc 2. Start "Attachment Manager". Look at the dispatcher at the presence in the new annex with the signs of a hail. Yaksho such pristіy є, natisnut on new right button Misha, and vibrate in the menu with the left button "Update driver".

Croc 3. Have a click on "Automatic sound of new drivers".

Writing knowledge by the system required driver the sign of the hail from the annex in the "Dispatcher" is known. You can, if you need to re-install the PC.

As a hard disk in the system, it did not appear, but if it is included with the HDD case, there is a CD-disk with drivers, so it is required:

Croc 1. Insert the disc into the optical drive of the laptop by pressing the button and snapping it back to insert the CD.

Croc 2. On the work table two click on the icon "Tsey computer" with a single button.

Croc 3. A list of disks and attachments in Windows OS will be displayed. Open the disc to the CD-drive for the sub-clinks of the Misch.

Croc 4. Know in the folders to start the file "Run" or "Setup" by two clicking on the new left button of the Misha.

Croc 5. raise the need programmatically secure up to the proponated order. HDD will appear in the system.

Connecting a new disk to the OS

As long as the hard disk is not connected yet in Windows OS, it does not appear in the provider, as it has not been initialized and formatted.

Croc 1. Draw the "Win + R" keys on the keyboard. Start the Viconati window. Type in a row "diskmgmt.msc" and string "OK".

Croc 2. run Windows utility"Keruvannya discs". To know the disc in the left store, the inscriptions like "Do not use the first word", and click on the new right click Misha, vibrating in the menu, which is opened with the left button "Initsializing the disc".

Croc 3. Put a tick on the required HDD before the initialization. Put a tick on "MBR", as the HDD is less than 2 TB, and on "GPT", which is more, and "OK".

Croc 4. Pislya іnіtsіalіzatsії disc will be transferred to the camp "Not rozpodіleniy". Click on the hard disk space and click on the mouse and click the left button on "Create a simple volume."

Croc 5. At yaky appeared maister natisnut "Dali".

Croc 6. Fill in the settings for the changes, natisnut "Dali".

Croc 7. Vibrate a letter in the vipadayuyuyu list, from which disk will be identified in the system, natisnut "Dali".

Croc 8. Vibrate the type of system files (call NTFS) and note that (be it like the HDD in the system), put a tick on the "Format display" and click on "Dal".

Croc 9. Revision entered information and natisnuti "Done".

The disk will be formatted and ready before the weekend.

As only the connections are stored, you can exchange files with it.

Know detailed information, Yak stand, in our new statty.

Video - Three ways to create a hard disk drive

connecting hard drive to a laptop or a computer - it’s not necessary to fold, protest, tі, hto nіkolіz tsim not sticking, maybe not the nobility, as they are priced. I will try to look at all of the statistics. are available options Connecting a hard disk is like mounting in the middle of a laptop or a computer, so there is an option for a new connection in order to rewrite the required files.

First for everything, I want to make it clear, if you don’t know how to connect the hard drive to the laptop, then I would recommend zvernuttitsya for a cim before the general master, for any repair of a computer - the price of a robot. Especially pricewise for the smart genus of ultrabooks and laptops Apple MacBook... Also, you can connect the hard drive to the laptop like the original HDD, it will be written below about it.

As a matter of fact, in some cases, plugging a hard drive to a laptop to replace technically awkward folds. As a rule, on such laptops, from the lower side, you should mark one-two-three "krishechki", fastened with screws. Go to one of them and go to Winchester. If you have the same laptop - know the old hard drive and install a new one, it is elementary for standard 2.5-inch drives with a SATA interface.

Connect hard drive

The easiest way to connect is the connection of a hard disk to a computer, or a laptop in the capacity of a zoning drive. Struggling for additional adapters, adapters, new housings for HDD. The price of such adapters is not expensive and is rather expensive for 1000 rubles.

The sensor of all the accessories is approximately the same - through the adapter, the necessary power is supplied to the Winchester, and the connection with the computer is connected to an additional USB interface. There is nothing folding such a procedure is not very practical like a flash drive. Alone, in the form of a hard disk drive bezpichne viluchennya In any case, an attachment cannot be switched on during the operation of the robot - because of a great part of the capacity, it can lead to a hard drive.

The need for a hard disk drive to a laptop can be taken if necessary, there is a lot of money to collect personal tributes, if you are happy with the old winters, and on the last day you will need to install new computers. With a large number of viconati, the connection can be made in ways.

The procedure for replacing the old Winchester with a new one

If the old HDD, appearing on the laptop, completely "screwed up", then just one way out of the situation, it turned out to be - install a new one. Yogo can be found in any computer store. Buyers winchester, it is necessary for the nobility, which should not be 3.5 ", as for stationary PCs, but 2.5".

Before you connect the hard drive to the laptop, you can also go to the HDD interface, which appears on the PC. Practically all modern portable computers are equipped with hard drives with pink SATA. Older models can use the IDE (PATA) interface. For the first time, the speed of information transfer reaches 600 Mb / s (SATA 3.0), I would like to plan for a new standard (SATA 4.0) with the speed of 12 Gb / s connection. The pink IDE allows you to transfer data from a file not more than 133 Mb / s. As a matter of fact, what kind of interface will support your laptop;

The procedure for replacing the old HDD with a new one will come:

Connect another Winchester

You can install another hard drive on a laptop using the following methods:

• via DVD roses'єm;
• for the help of special transitions (called winchester).

If you use a DVD drive on your laptop, you can use a different winchester instead. For a person it is necessary:

If everything is broken correctly, then when the laptop is turned on, a new disk appears in the My Computer window. You can, in front of you, you will need to be informed about it.

Yaksho vi do not maєte bazhannya pozbuvatisya vіd DVD drive Then you can connect the new HDD via USB port for an additional set of peers. You can see the stench in a funny way, protects the function of the same.

There are three types of adapters:

• s IDE to USB;
• from SATA to USB;
• combined.

The vibe of one of the other options is to lay down from the interface, such as a maovnіshnіy disk. A very special set of adapters also includes a living unit, so yak USB out do not expect to see the necessary springs.

The procedure for connecting a new winchester to a laptop of views on images.

Use special adapters that allow you to sign the procedure for connecting the HDD to the laptop. Yak butt can be viewed as an adapter between USB and SATA / IDE company Sabrent, which equips us with the necessary roses and does not require an additional adapter for life. Yogo partist to become close to $ 15.

Recognize the situation: you are viewing the term robot and the rapt on the laptop ... the laptop is turned on and does not turn on anymore. The robots have run out of time before they can be installed, and the repair of a dodgy device will not be quick. How robiti?

Golovne - do not panicuvati! You can see everything, as long as you have a stationary PC. Bringing the mother's hand to the hand of the nobility is a secret, like connecting the hard drive from the laptop to the computer. We'll talk at a glance.

Briefly about the accumulators that are used on laptops

On modern laptops, not only the classic HDDs, but ale I. Both, and in all, there are mothers of different, incomprehensible interfacing connections.

SATA

The most affordable interface and hard, and solid state drives I will call it "SATA". Win of presentations with 7-pin pink transmission of data and 15-pin - for connection of a harchuvannya.

SATA interface most often it is necessary to develop and accumulate the middle for stationary computers, if the motherboard is new (as long as you don't mind specializing and old add-ons). I will increase the identity of the SATA standard, which is used in laptops. More precisely, the single standard.

IDE (PATA)

You can save up with the IDE (PATA) interface today only on old outbuildings - more than 10 years old. їх specialty- a new 40-pin rose for a transmission loop and a 4-pin harchuvannya port.

Motherboards for stationary PCs last generation The IDE (PATA) interface is not available anymore. To connect the IDE drive to the computer, only the SATA adapter is de-implemented, if an adapter is required.

mSATA

The mSATA format has a miniature accumulation of the last generation. For the shape of roses, mSATA is even similar to mini PCI-E, but the odor is electrically insane.

Connect the mSATA attachments to a large number of desktop motherboards only through an adapter, so that the whole interface is easy to install on them.

M.2

SSD-drives of the M.2 standard are more compact, less mSATA, and are mostly used on ultrabooks. There are three types of roses, which appear one from one key change:

• Type B maє viriz closer to the left edge. The part, which is located above the key, has 6 contacts.
• Type M ma viriz closer to the right edge. The part, yak roztashovana to the right virizu, there are 5 contacts.
• The B&M type has a key off.

SSD with B and M roses can only be plugged into a slot of its type, and B & M can only be plugged into that slot.

On desktop motherboards, M.2 slots are still quite rare.

Connecting HDD from a laptop to an interface of the same type on a PC

Everything is simpler here. To connect the SATA drive from the laptop to a stationary PC, which is similar to the motherboard interface, to get the SATA data cable (in the picture on the right) and the output rose on the cable to the living unit. As a matter of fact, buy a Molex-SATA adapter from a computer store (on the picture).

In another way, the SATA cable is connected to the port on the motherboard. The bandwidth of the port (3 Gb / s, 6 Gb / s) is not very high in terms of overall performance.

For connecting an IDE (PATA) drive to the IDE port on the motherboard, a wide 40-pin ribbon cable, a Molex live cable + an IDE 3.5-2.5 adapter is available.

If the computer is not wired up from the "Neridny" accumulator, it is necessary to switch it to the "slave" (pidlegly) position. Try to get help for the jumper (jammers) on the contacts of the IDE-disk, as the connection is charged with the port. Information about the spacer of the jumper in the "slave" position can be found on the disk itself, or in the default file on the virobnik website.

When the jumper is installed in the "cable select" position, the lead and lead nose are started with the cable. At the same time, the "slave" drive is guilty of the connection to the block in the middle of the train (on the picture, there is a bea).

Accumulate mSATA and M.2 just insert it into the slot on the motherboard.

Connecting a disk of the same type

Schob pid'єdnati to the computer accumulate, yak do not get used to motherboard, You need an adapter adapter. for example:

• IDE-SATA (SATA-IDE).

• SATA-USB.

• mSATA-USB.

• M.2-USB-SATA.

• IDE-USB, mSATA-SATA, M.2-SATA etc.

There are a lot of different adapters, but not all of them are easy to find for sale.

Yak rozmіstiti small mobile HDD in the system block

Another problem is that I often spinning koristuvachiv - like roztashuvati HDD from a laptop in the middle of a stationary computer. Several options may be allowed here:

• Installation in a 2.5 "kit. Bagato computers for the case of the last generation can be used for SSDs, you can insert a 2.5" HDD into a laptop.

• Vikoristannya adapter 3.5 "-2.5". The middle of the adapter is supported by a mobile drive, fix it, then insert everything at once into the cat for a standard 3.5 "hard drive and screw it with screws.

• Roztashuvannya disk from the laptop on the bottom of the system unit. Below the HDD pidklastya kilimok for Misha or a ball of gumi, schob change the vibrations. Tsey way is suitable only for short-hour connection, always so it is not so easy.

First of all, before installing the mobile HDD in the middle of the system unit, do not forget to start your computer. When connected via a new port (USB, eSATA), no work is required.