AMD Radeon Settings what is this program? AMD says goodbye to Catalyst: a new software platform has been launched Radeon Software Crimson Radeon settings does not start

During the last few days we were able to protest the Crimson Edition in detail. We were able to carry out the same work as with other drivers before. We conducted a number of tests, and also checked the low adjustment. Here I would like to point out that AMD developed the Crimson Edition “from scratch” based on Qt. The driver shell now launches faster, and submenus also run more smoothly. At the same time, AMD delays the launch of the shell up to five times under Windows, so that it blocks other startup procedures. At any given time, the program starts much faster or earlier. The procedure for removing the driver has also been updated, which removes all the components without adding “ballast” to the system.

In the first two screenshots, you can clearly see the new interface changes. AMD has completely said goodbye to the old design, now the menus look flat, the structure has also been changed so that required functions can be accessed more quickly. For gamers who love everything, the most important thing will be the adjustment of various filters and effects. They can be set globally or individually for skin conditions. For this purpose, the Crimson Edition driver shell scans hard drives in search of igor. The game, before speech, can be launched without any delay, choosing in the shell.

In the profile, in addition to adjusting the brightness, you can save and adjust the overclocking. You can also create multiple profiles for one game, then you can select the one you need.

In addition to the primary adjustment of image brightness and filtration, adjustment of the Frame Rate Target Control (FRTC) function is available. Using FRTC, you can set the maximum frame rate for graphics. Of course, the function is only useful because the game provides more fps and is not needed. The purpose of technology is energy saving. FRTC works not only in the game itself, but also in menus and animation screens when the video card can output hundreds of frames per second. You're also bored and watching movies, since you don't need more than 60 fps here. We have already provided test results and assessed potential energy savings.

There has been a significant change in support for overclocking via OverDrive. Here you can set the GPU clock frequency, as well as adjust energy management, temperature and fan speed. You can either adjust the sliders directly or move the knob to the right-hand side. The same output can be set both globally and specifically for individual games.

As a novice gamer, the difference between global and individual profiles may or may not be significant. It seems to us that the selection value is more important for functions such as Frame Rate Target Control. For less powerful games, FRTC can be activated, or otherwise disabled. They themselves are worried about dispersal. For games with high performance, the boost can be activated to extract the maximum from the video card. For less powerful games, fire is not required.

Most users who have adjusted the video and display of the Crimson Edition will no longer find it so useful. You can customize color profiles, rendering profiles, and video filters. And demonstrations that allow you to evaluate the flow of adjustments to the video sequence. Display options are important for those users who plan to use Virtual Super Resolution. The user now has new access to adjusting separate data, timings and update frequencies and can change them (regardless of the system modes). Previously, this could only be done on FirePro video cards.

When adjusting the displays, we found parts of the AMD Catalyst driver, which is to replace the old interface design and “pimples”. According to AMD, all the options are being gradually redesigned for the Crimson Edition, so fragments of the old Catalyst will soon appear. So far we have not been able to protest the adjustments of Eyefinity, which are important for configuration with many monitors.

The most important tab in Crimson Edition is the system information. All basic information about the installed software and hardware is displayed here. The tab will be especially visible on some FreeSync monitors, so you can find out what the technology is doing. Previously, this information could be found in the monitor documentation.

Detailed information about the video card is displayed. The values ​​of each tile can be copied from the clipboard. They can be easily transferred, for example, to messenger. All this clarifies the situation due to confused driver versions.

Additional options are available when the driver is configured, such as displaying the driver shell window or adding advertising. In the same way you can skasuvati be-yake zroblene nalashtuvannya.

Through notifications you can inform your customer about any problems or incorrect options. Radeon Software Crimson Edition is self-maintaining and updates are installed automatically.

Find a new icon that will appear on the task panel or appear when you right-click on the desktop. Through the command panel, you can only launch the Crimson Edition shell, and activate global profiles without launching the shell.

A completely new interface, improved functionality and productivity

Enter

We don’t need to often write articles dedicated to the latest versions of video drivers, like special versions and the great increase in productivity in games that we’ve already heard about. There may be some problems with the AMD Catalyst Omega driver, however, a look at some of the products on our website suggests this. This version was a major update to AMD's drivers, offering new features and increased productivity for users popular games. After the release of the Catalyst Omega driver, software from AMD was downloaded over 60 million times - an astounding figure.

The reduction of drivers for video cards is even more dramatic, since a video card is not easy hardware solution And the hardware and software is the most important part, because it can be improved without the need to replace hardware solutions. Drivers for video cards from AMD under the basic names Catalyst were first released a long time ago, the first version of ATI Catalyst appeared back in 2002, and video drivers for Radeon have been released for over 20 years.

Over the course of this hour, drivers for video cards have become much more than just drivers for devices, including those used to ensure their functionality. Now the driver package includes a decent set of software: interfaces for computers, libraries, tools, programs, etc. This entire set of software can be called a video driver, but in reality it is also a small graphics operating system. It's no wonder that clear security software is even more important for businesses, retailers, and professionals who work with graphics.

Today is a very big and important update for AMD video drivers. Since the first announcement was about the name of a new subsidiary of the company Radeon Technologies Group, they decided to give a new name - Radeon Software. We say goodbye to our Catalyst drivers; this era has ended and a new era has begun. The first version of Radeon Software drivers was called Crimson Edition, and later global versions were released, called one of the shades of the red color (Crimson - crimson color).

The announcement of the planned release of a radically new version of video drivers generated great interest: dozens of articles and new products were published, thousands of comments were written on social networks and forums. AMD video card owners have clearly been looking forward to the new driver with impatience. And not for nothing, but it also gives them a completely new interface for the user with a change in the hour of attraction, a new and reduced capacity, including decreased energy when watching videos and awkward games, as well as optimization This is the productivity of 3D rendering.

In 2015, there were three great releases of WHQL drivers and nine beta versions, all important gaming projects on the GTA V, Star Wars Battlefront, Call of Duty: Black Ops 3 platform received optimized versions of drivers from the day they went on sale. But the plans for 2016 are even broader: up to six major releases of WHQL drivers are planned, and additional beta versions are planned as needed and the release of significant popular games.

New user interface Radeon Settings

One of the most important changes in the new driver package is a completely new interface for setting up a video card and a redesigned installer. AMD has reworked the utility for changing the settings of the Catalyst Control Center (CCC), creating a completely new tool called Radeon Settings. Having removed the current interface of the client, it is simple and reasonable, and the head is significantly advanced, lower than the previous CCC. A number of new functions have also been added to Radeon Settings.

The Radeon Settings robot has a software development toolkit called Qt. Since this set of libraries and tools is cross-platform, then, purely theoretically, it is possible to easily transfer the code to other operating systems, for example, Android. However, the new interface of the user interface works on all operating systems of the Windows family - versions 7, 8.1 and 10.

The main improvements of the new driver are significant: a much shorter time to start programs, an intuitive interface for setting up a graphics processor, a new manager for setting up profiles for game programs, a new interface for GPU overclocking capabilities, and also changed and adjusting the display display, video processing and configuration of the AMD monitor output Eyefinity.

The most important thing in Radeon Software Crimson Edition is a number of changes to the setup and installer interface, which will reduce the cost of troubleshooting when installing, running or running a new version of the software. Just as the theater begins with the hanger, so familiarity with any driver package begins with the installer. According to AMD, the new version has an installation hour speed up by approximately 1.4-1.5 times, the same as the previous installer. We also created a new interface – keep it simple and intelligent.

The functionality of the installer has not changed - you can approximately select the driver components required for installation. Of course (perhaps only for the beta version, the current press), it is important that you can choose to install the server interface: either Radeon Settings (AMD Settings) or AMD Control Center (CCC). Then we were fortunate to have been forgiven and greatly improved the progress of the installer - now we are alone.

Otherwise, in addition to a simplified interface and faster installation, the process differs little from the latest version. And the axis of launching the adjustment of Radeon Settings itself after their installation will be enriched more quickly, but there will be a clumsy CCC. To launch Radeon Settings, just select the option context menu robotnik Windows desktop or click the mouse on the special red icon at the end of the system tray. From this menu you can also quickly select a profile for video games.

New settings of Radeon Settings are launched literally in a second, the initial hour for launching programs is 2-3 times faster than previous versions, and this is really noticeable, especially when re-enabling the settings.

In addition, the initialization time for connected displays will be reduced from 11 to 3 seconds. Although it is not so important for the main monitor when starting the system, when you connect an external display or projector to the laptop, you can only move quickly.

If you are concerned about the usability of the new interface, then you can reduce the number of necessary actions in order to achieve any adjustments. For example, in order to install the latest driver, you need to press the mouse buttons, and the new Radeon Software Crimson Edition is content with more than three such pressures. Approximately the same goes to the Radeon Settings interface.

Let's take a look at all the sides of the new Radeon Settings panel now. The starting page is shown in the screenshot above, and the next page shows the page for checking the software update - this needs to be done manually, but I want to turn the side to the side for updating it was not obligatory:

Let's move on to the settings of the Radeon Settings utility itself - here the ability to update all configuration settings, the ability to enable the tray icon, contact AMD, as well as how to customize the interface is required. This also includes the ability to enable advertising banners (of course, by enclosing maybutnє) ).

The add-on button clicks Okreme vikno with a completely different interface, familiar to us from earlier versions of CCC - here you can configure additional parameters for working with displays and sound, which (yet?) have not changed in Radeon Settings:

Now let’s move on to the main sections of the new utility. The first button next to the game controller icon clicks a menu with a set of game profiles detected by the driver in the player system. Here you can change the global 3D rendering settings:

On the one hand, you have to manually create profiles for games and change them, on the other hand, the games are not cataloged in any way, they all lie in one list of names, which is not very easy. Global adjustments and adjustments for specific games are approximately the same, and in terms of functionality they differ little from others:

The main thing is the visual impact of the new interface - it stretches and the utility window changes the dimensions as desired (maybe the minimal boundaries are all lost), automatically re-arranging the order of the controls. This is especially important and careful because of the great difference in the permissions of current devices.

It’s a pity that you have to pay for everything - it seems to us that the adjustments were easily spent on precision and accuracy, equal to what happened before, and all the control elements are still not in place ovane - now їх will have to joke in front of be- what kind of changes.

Immediately instruct you to get familiar with the overclocking capabilities, primarily after setting up the settings, but also in the new interface. On this panel you can view the current frequency, temperature, fan speed, as well as change target frequencies, accumulated energy and fan speed - all the same.

The next panel is designed for customizing the video display - you can select profile settings from the files configured in AMD, and customize your settings by turning on all the technologies for enhancing the brightness as required. Guess what, the customization steps have been lost in the additional menu, which you can see right away (amazing thing).

This setup panel is used for configuring displays. In this case, before testing the connection system, the LG monitor was supported by FreeSync technology, and we were able to manually indicate frequencies, including the current technology: from 48 to 75 Hz. You don’t need to set up your settings, you can also find the settings in the additional menu.

We can no longer admire the panel with information about the software and hardware configuration of the computer system - it manually shows everything necessary in maximum detail, even on three pages.

In general, the new Radeon Settings interface can be accessed manually and can be accessed completely. It works effectively with a lot of CCC and does not have much memory. It’s true that if you open too many tabs after launch, you’ll experience system memory You can go up to 175-200 MB, which is a lot in today's world.

And now let's talk about subjective shortcomings. One of the shortcomings we have noticed is the lack of direct selection of the language interface - including installations in the system. It would be bad for the mother to be able to install an English interface, and not because the translation is imperfect, but because there are a lot of Russian words that are too long for such an interface and not go into short blocks. Also, we didn’t like the fact that we can’t turn on any new visibility to the interface.

And we still don’t need additional functionality for monitoring temperatures, frequencies, voltage and other parameters from them displayed on the screen for an hour or in the form of graphs, as obtained from third-party utilities. In addition, regardless of the short stability of the new panel, the work of the program in inactive mode was completed several times without any action on the part of the user - there is still something to work on.

However, it is clear that this problem will remain until the end of the latest beta version, intended for awareness, so we will not worry too much, counting on the fact that the final version of Radeon Software Crimson Edition will be reduced when the cry is short.

In addition, there is no need to add to the topic - a new utility for uninstalling AMD drivers and cleaning the system from their “tails” - . This utility removes all previously installed AMD Catalyst drivers, including video and audio drivers, and also cleans unnecessary files and registry entries. Cory thing.

Productivity optimization

And the axis is another important section - increasing the speed of rendering in games - one of the most important for all computer users. This is especially great when special versions are released, such as Catalyst Omega or Crimson Edition. In the Catalyst Omega edition, productivity optimization was carried out in greater detail, but for the Crimson Edition the main change was still the new interface. We also received a lot of attention to the speed of 3D rendering and greater comfort at AMD.

Radeon Software Crimson Edition will provide increased productivity to almost all users of Radeon video cards, and different sizes it lies in the minds. For example, the increase in frame rate for one of the popular DirectX 12 Fable Legends benchmarks is 7-20%, depending on the separate release: FullHD or 4K, in the remaining case the increase in productivity will be less. This test will be carried out on a system with a video card AMD Radeon R9 Fury X, updated Radeon Software Crimson Edition drivers with the old release of AMD Catalyst 15.7.1.

Apart from benchmarks alone, AMD representatives also indicate an increase in speed in current games. For example, the increase in the average frame rate of Call of Duty: Black Ops 3 is close to 6-8%, which is acceptable. This version of Radeon Software Crimson Edition is the same as AMD Catalyst 15.10 Beta.

This chart shows the growth in several popular games during the last hour, after installing Radeon Software Crimson Edition drivers, updated from Catalyst 15.10 Beta. This also means increased speed of rendering in the operating room Linux system. Gains in Radeon Software Crimson Edition for this system are often around 10-15%, but sometimes they reach 50-55% (for Total War games).

As always, AMD is equalizing rendering speed on new drivers and up to older versions on Catalyst 15.7.1 and 15.10, and the increase is not expected to be large according to AMD itself. We are wondering where it would be best to equalize the fluidity of the latest version with the latest drivers, including the beta version of Catalyst 15.11.1 Beta that remains available on the company’s website, which we have built ourselves ійно. We also took another old version – 15.9.1 Beta.

The set of criteria for our high-quality express test is as follows: Star Wars Battlefront, Fallout 4 and Call of Duty: Black Ops 3. For our vimirs, we vikorized the video card model Radeon R9 380і test system based on top Intel processor under management operating system Windows 7 SP1, took a separate building 1920x1080 and tried to set the maximum game settings (including the very powerful Call of Duty: Black Ops 3, where the settings were set to High). One wonders why we have an increase in speed in these games?

Of course, there are still small increases in current games, although they are not significant at all compared to the Crimson Edition that is still available in the beta version of Catalyst. Although updated with the new driver version 15.9.1, the test AMD video card showed an additional 5-25% increase in speed. Of course, for Call of Duty: Black Ops 3 the driver has already been optimized before, but the solution has worked out well. And as soon as we update the new product from Catalyst 15.11.1 Beta, the increase in games was observed between the suppression of the virus - up to 2-4%.

Let's look at the frame rate graphs for the most popular games taken as a result of testing:

Productivity graphs in the tested games confirm our findings - no particular increase in productivity was noted with the remaining available video driver Catalyst 15.11.1 Beta. And the axis driver of the old version 15.9.1 is clearly present in almost all games that were tested for testing.

Shader caching

It’s not just the frame rate that determines the user’s comfort, but also other indicators that were improved in the new Crimson Edition driver. For example, it is significant that shader caching is becoming possible - storing compiled shader code on storage devices, which can speed up the acquisition and development of rich game projects that use DirectX 10 and DirectX 11.

Why is shader cache needed? It’s a lot of time to imagine a completely “seamless” world, shaders in which are sent to the video driver right before the start of the game, and even they need to be compiled so that you can create fluctuations in the frame rate and more time of comparison And my dear. The shader cache saves shaders before they are compiled and quickly extracts them from their analogues when needed in a ready-made look, which requires less work for the CPU and video driver. As a result, the hour of engagement with friends and peers decreases, and there is also a sharp drop in productivity (frame rate spikes) during the hour of play.

A secondary shader cache is installed in game profiles, and the information is saved in the AppDataLocalAMDDXCache directory. For certain games, Shader Cache is already enabled in profiles after registration, but you can also enable it in the Radeon Settings 3D adjustment manager.

These are all words, but what about the real hour of fascination, why does it really change? According to AMD, enabling the shader cache reduces the reload time (if the cache already has shaders compiled) for games such as Bioshock Infinite and Star Wars Battlefront. Running the benchmark in the first game without cached shaders takes 11.35 seconds, and with a larger cache it takes just 9.96 seconds, which is 12% less. For Star Wars Battlefront, the hour of Survival - Endor with cached shaders is 34.5% faster - it takes 11.2 seconds instead of 17.10 seconds. Nasty growth!

While there is an increase in smoothness directly during gameplay, another scenario in which the shader cache is added is games that send shaders to play directly in the world of play, and not the competition of the level. There are many possible productivity gains due to the fact that the CPU starts working on compiling shader code right before the start of the game. The shader cache significantly reduces the likelihood of such problems arising due to shader compilation itself.

How do you perform in the middle of the graphics, with shader caches enabled for Call of Duty: Advanced Warfare (High Quality tuned, SMAA T2X anti-aliasing enabled at 4K resolution) on a configuration with a pair of Radeon R9 390X video cards in Cross mode Fire to the wicked keshuvanna. The value of 2149 ms for rendering a frame means a very noticeable “glitch” in the game process - more than two seconds on the display screen for one frame, and the game is not displayed for the entire hour. Increasing the shader cache causes the rendering speed to drop significantly, resulting in consistently smooth video.

Improvement in frame pacing technology

Support for smoother multi-chip rendering through additional frame pacing technology has been available in AMD drivers for a long time, as early as Catalyst 13.12. The technology works for CrossFire-configurations, which are formed by the vision of desktop GPUs and with the increased pressure of APUs and GPUs when working on rendering - in configurations AMD Dual Graphics. The new version of Radeon Software Crimson Edition transfers this technology to games that use not only DirectX 10 and 11, but also DirectX 9, including many games, including e-sports.

The graph shows hours of work on rendering frames gri The Elder Scrolls V: Skyrim, which uses DirectX 9 on a test CrossFire system, which consists of a pair of Radeon R9 Fury X video cards - as you know, it is unacceptable for the comfort of changing the frame rendering time, typical for early rich-core systems, in which podku vdayutnі. The technology works on all supported graphics processors from AMD, as well as older APU A8 models.

Improved FreeSync technology

We have already talked more than once about the technology of dynamically changing the update frequency of AMD FreeSync, which eliminates such artifacts when displaying a sequence of frames, such as image tearing (“tearing” appears when vertical synchronization is enabled - V- Sync off) and causes blurring and uneven display frames when synchronization is increased (when V-Sync on is enabled).

Radeon Software Crimson Edition brings support for this technology for CrossFire-configured DirectX 9 games, in this version there is compensation for low frame rates, and AMD also announced that it is working from video processors Please make sure to enable FreeSync dynamic synchronization when connecting HDMI displays.

The biggest concern for us is compensation for low frame rates Low Framerate Compensation (LFC). When the frame rate drops below the minimum refresh rate of the display with FreeSync support, a special adaptive algorithm automatically changes the output frames and their refresh rate to reduce unwanted stuttering frame rates.

In other words, at FPS below the minimum refresh rate and vertical synchronization (VSync on) FreeSync was not working before, which caused unsmoothness in frame changes. But now, with LFC enabled, frame changes will be smooth. When synchronization is turned on, these same minds are wary of frame tearing (so-called tearing), and turning on LFC reduces this.

There are no parameters on the side of the computer or updating the monitor is not required, this feature is automatically enabled on all monitors with FreeSync support, the maximum update frequency for some doubles or more exceeds the minimum. For example, our test LG monitor has a minimum refresh rate of 48 Hz and a maximum refresh rate of 75 Hz, and this technology will not work, since 75/48 = 1.5625, which is less than two times. It's a pity.

Energy optimization

Another important issue is power efficiency, especially for AMD, whose power supply is not among the leaders. The new Radeon Software Crimson Edition driver includes improvements to optimize power consumption, which may help improve performance for Radeon graphics cards, including the Radeon R7 360. R9 380, R9 390 and R9 Fu.

For example, there is a clear decrease in the amount of energy accumulated when watching high-definition videos. Energy savings in this type of situation are quite noticeable, and will result from reduced noise from the cooling system of the video card and case, which is regulated according to the temperature in the middle of the PC. The current graph shows the change in energy levels per hour of watching streaming video from YouTube in FullHD on a 4K display.

The energy consumption is equal to that of a system based on an Intel Core i7 5960X processor and a Radeon R9 Fury X video card when installing Catalyst 15.7.1 and Radeon Software Crimson Edition drivers. The new version allows you to significantly reduce the energy consumption of this system, the energy consumption of the GPU itself is reduced significantly, and the overall energy efficiency of the system is also noticeably improved.

A decent reduction in energy efficiency can be achieved in other games using additional technology Frame Rate Target Control (FRTC), which allows you to set a target frame rate, reducing both the demand on the GPU and its energy consumption. We already wrote about this technology, which appeared in Catalyst 15.7, which allows you to reduce the energy consumption of the graphics processor, so that it does not need to work with the robot, reducing the frame rate at a higher rate. Instead, the GPU consumes less energy and generates less heat, which results in less noise from the cooler.

It is important that FRTC does not work only in 3D scenes, but also on the screens of game menus, where FPS often reaches stifling frequencies, and the GPU is at a premium. For obvious reasons, FRTC is most stagnant in “light” games, where the reliance on the GPU is small, like in older projects, and since connections until the system is fully loaded, the monitor has low performance.

The Crimson Edition has a wider range of frame rates and a wider range of target frame rates. Now all programs that use DirectX versions 9, 10 and 11 are supported (previously the D3D9 version was simply not supported), and the target frame rate can be between 30 and 200 FPS. The next diagram shows the improvement in energy efficiency achieved by enabling FRTC in Rocket League, which runs DirectX 9, with a separate 1920x1080 running.

The powered system based on the AMD Radeon R9 Fury X graphics card consumes 297 W per FPS, while the Fury X consumes 175 W, and the frame rate is set to 90 FPS, giving only 172 W and 61 W. obviously. Total savings of 125 W when using Radeon Software Crimson Edition.

FRTC technology has been enhanced for gaming programs that use DirectX 10 and DirectX 11. Although this support appeared in Catalyst 15.7.1, modifications to Radeon Software Crimson Edition allow you to achieve better results The information has been updated with older versions of drivers. So, with Bioshock Infinite, a separate 4K version with a high-power Radeon R9 Fury X video card has a frame rate reduction of 60 FPS, saving up to 107 W is achieved with a high-power Radeon Software Crimson Edition, although Cat. alyst 15.7.1 allows you to save up to 50 W. Almost the same as playing Sniper Elite in the same minds, but with reduced FPS to 55 - Crimson Edition saves 190 W of energy, and old version Catalyst is less than 90 watts. The increase in energy efficiency is more obvious!

Reduced video and image display

With the new features of Radeon Software Crimson Edition, we have significantly improved the performance of video data. New drivers have technologies for adaptive contrast change and increased directional scaling. The new version of AMD drivers has six installation profiles, as well as a profile for installation and configuration of the user.

When you select a profile, the setup steps change depending on the screen size, the content that is being displayed, and the player that is being viewed. All additional image processing technologies are included. In the camera mode, you can select the values ​​of sharpness, color saturation, steady video and fluid motion technology.

A new feature that has appeared in the Crimson Edition is direct scaling, increased smoothness of lines on the edges of the image displayed when the image is displayed. low tolerance on current displays - when a separate 1080p video is processed on 4K monitors. In simpler terms, the technology allows you to significantly change the “bats” in the image displayed using basic scaling algorithms. The easiest way to understand this is in practice (imitation):

The direct upscaling algorithm displays 1080p content more clearly on 4K displays, using an adaptive upscaling filter that enhances the edges of the image and makes it look better. For this filter you need a video card Radeon series R9 Fury Series or Radeon Nano, as well as support for browsers and media players. The technology is automatically enabled when video is played separately in 1080p on 4K displays.

With the release of Crimson Edition, the dynamic contrast algorithm for data has become adaptive, changing accordingly to the video. Adaptive dynamic contrast allows you to increase the underlying contrast of the image, removing the dark areas, so that the image on them is no longer visible. Dynamic contrast is set to the selected video profile and is selected. To use the adaptive contrast algorithm for video data, you need a Radeon R9 285, R9 380 (X) or R9 Fury series video card.

These advanced data processing capabilities, previously unavailable on hybrid processors, are now available on sixth-generation APUs with a TDP of 35 W, such as the AMD FX-8800P and AMD A10-8700P. Options include image reduction, frame rate reduction, and a filter for enhanced detail. The first two options work when burning Blu-Ray discs using CyberLink PowerDVD 15.

The new Crimson Edition drivers have an incentive to add driver permissions, which allows you to create your own power mode, change timings, update frequency, etc. This capability is available in additional adjustments Radeon Settings, which you can click on in the near future.

The ability to create permissions for the user with additional Radeon Crimson Software Edition is available for all graphics systems AMD processors Radeon, which runs on Windows 7, 8.1 and 10 operating systems.

Another useful feature has appeared - virtual resolution is not only available for 3D applications, but for everything, including the Windows 10 desktop. This feature allows you to get more space on the display. Wikoristannya Windows 10 and monitors with high resolution and pixel density of more than 150 DPI.

VSR technology can be used to install a large separate part of the desktop on a display of a smaller part, which can be difficult in certain situations - for example, when displaying the same image and separate settings on two monitors with different separate settings, or for the task, What do you get from more space, larger tables, video and photo editing, with programming and other situations?

For example, on a laptop that has a separate screen of 1920x1080 pixels and 150 DPI, you can set a separate screen of 2560x1440 pixels to capture more space for Rotating the windows on the work table.

New for retailers

The stable robot and rich functionality of drivers for video cards are not limited by other AMD solutions, as well as by software vendors - 3D video cameras. For them, one of the good news will be the emergence of technology support AMD LiquidVR The Crimson Edition driver is the first publicly available driver with this functionality.

AMD's initiative is promoting and reducing costs virtual reality Allows developers to take advantage of new driver capabilities related to the operation of VR devices: affinity multi-GPU (a pair of GPUs work over their own VR image frame), Direct to Display (simpler connection of virtual reality devices i), Latest Data Latch locking with fast transmission to GPU data), asynchronous shader shading Asynchronous Shaders. LiquidVR technology supports the operating systems Windows 7 and Windows 10, supporting graphics processors Radeon R9 290, Radeon R9 390 and Radeon R9 Fury, as well as dual configurations.

A couple of words about the asynchronous execution of shader code, which is rightfully written by AMD. All of their solutions, based on graphics processors of the GCN architecture, use hardware support in the form of special Asynchronous Compute Engines, asynchronously compose commands that need to be sent. The hardware implementation is significantly superior to the software approach of competitors and allows for increased productivity in the event that different types of calculations are performed simultaneously.

This possibility is already being widely exploited by various game developers, including console ones, but not just the asynchronous development of shaders for the creation of virtual reality. As a result, greater parallelism between different calculations results in a reduction in friction, which is important for the comfort of those who work in virtual reality.

In addition to the constant focus on VR, the new version of the Radeon Software Crimson Edition drivers has added a number of optional features included with OpenCL 2.0 (Open Computing Language) - the industry standard for high-performance computing. recognition Among these possibilities is 32-bit support for the Generic Address Space (Windows only), support for buffers larger than 4 GB, support for images with mipmap levels and depth maps.

We can guess another more important solution for retailers, like AMD. Just a few days ago, AMD CodeXL 1.9 was released - a set of utilities for comprehensive work with profiling, analysis and search for errors in software for 3D developers. CodeXL integrates with the Microsoft Visual Studio package, so it is seamless and does not require modification special code at follow-up programs.

New features that have appeared or improved in this version of CodeXL: energy profiling (energy, frequency, voltage and core temperature in real time, including those related to APU components: video core and universal computing no cores) for more than two graphics processors simultaneously, static analysis, writing OpenGL shaders on Linux, searching for bugs (GPU Debugging) in HSAIL programs, supporting the Ubuntu 15.04 operating system and correcting found bugs.

Fixed bugs in earlier versions of Catalyst

To reach beautiful yakost and stability, the company conducted twice as many automated driver tests as compared to the Catalyst Omega driver, a quarter more hours were spent on testing the driver with a 15% greater number of results their software and hardware configurations.

Moreover, AMD planned to continue the practice of telling the developers about those problems that need to be put first on its mind. That's why, before the release of Crimson Edition, they smelled the strength of AMD's core solutions and created a list of a dozen of the most important drivers for current driver versions. For their leadership, the company created a local team that was engaged in the detection of such bugs and their fixes, and all these problems were successfully resolved in the driver version that is being discussed.

This is a list of the ten most important changes in the Crimson Edition driver:

• Launch gaming programs with one-hour video playback on a side-by-side display without a system freeze
• FreeSync technology sometimes did not work as the game was launched simultaneously with various types of video being played on the YouTube video streaming platform.
• For a pair of Radeon 295X2 video cards, the option to enable and enable CrossFire configuration for additional CCC may not be available
• Autodesk 3ds Max 2016 sometimes froze when the Radeon family of video cards failed
• Beware of displaying a black screen when using the Windows 10 operating system between the Windows logo and the Windows account login window.
• Diablo 3 has been on the rise in Act 2 Desolate Sands
• GTA V completed the game on various configurations with a Radeon R9 390X video card
• There could be a reprieve at the time of establishment remaining versions drivers for video cards of the Radeon R9 380 series
• Ashes of the Singularity ran smoothly on various models of Radeon 300 series video cards with 2 GB of video memory
• Video engraving in MPEG2 format required downloading or decoding of video

Visnovok

Based on our review material, which describes the capabilities of a completely new version of the AMD Radeon Software Crimson Edition video driver, it can be seen that the company’s new software is actively Their versions of the driver, which are called Catalyst, give developers and retailers new capabilities that are faster.

The new version of the driver, which was called Radeon Software Crimson Edition, also had improved stability and corrected major bugs in earlier versions, including those recommended by the developers. There was also a slight increase in productivity for 3D rendering in current games in many minds, albeit slightly, consistent with the remaining beta version of Catalyst.

The main thing you need to see is among the first releases from Radeon Software - a completely new interface for adjusting the video driver called Radeon Settings. So, there are some shortcomings, but the new interface clearly looks much more modern than the old CCC, it scales to different sizes of windows, there are a number of new features and adjustments. In addition, it is much easier to use it, since it significantly shortens the time for launching the configuration utility and installing the driver in general.

You can also see improvements in the quality of video data processing: special post-processing algorithms that improve image clarity, increased comfort and smoothness of the frame rate when playing with a shader cache and improved technology ї frame pacing for multi-chip rendering. There is also a significant reduction in the technology of dynamically changing the AMD FreeSync update frequency and increased energy efficiency when watching videos and in games from the stagnant technology of frame rate interchange FRTC - they allow lower and the energy gained by the system once there is a significant reserve of productivity.

For retailers New version Drivers will also remain unknown, and there will also be public support for the LiquidVR virtual reality technology, various new functions based on the OpenCL 2.0 standard, support for new versions of the CodeXL utility, as well as a bug something else.

It is expected that Radeon Technologies Group will continue to improve both the software and hardware of AMD's graphics solutions, as well as the introduction of new technologies and capabilities in them. The final driver will be available for purchase.

The AMD website has announced the release of Radeon Software Crimson Edition 15.11.1 Update. Many developers have replaced the Catalyst Control Center software with a new one, hoping to get a more effective video card control panel. However, most of the customers responded with a remark: “Attached to the robot with Radeon Setting: Host Application.”

What can you do in this case and how can you fix the problem?

We see a problem

To ensure that the program runs correctly, before installing Radeon Software Crimson Edition, be sure to uninstall the video card drivers and Catalyst Control Center software. To do this, you can quickly use the Display Driver Uninstaller utility and clean up the installations with Revo Installer. It is also recommended to install Microsoft.NET Framework versions 4.5.1.

After installing and updating the frameworks, the installation of Radeon Software Crimson Edition starts. We select the components that are required for the correct operation of the video card.

Once the installation is successful, the system will ask you to restart your PC. Select "Re-enchant now".

After re-enablement, the program and the visible menu are launched. Instead of three sections there are now five: Games, Video, System, Eyefinity Display.

Once you go to the “Play” tab, you can access the already installed options. You can also add a new group.

To adjust the game creation, graphics, frame rate, then click on the game icon. A simple and intelligent interface will appear.

We choose to adjust the settings according to the strength of your video card and the capabilities of the game.

If you switch from the “Global adjustment” mode to the “One Drive adjustment” mode, you can adjust the acceleration under the group.

In this way, if you want, you will see the message “Assigned to the robot by the Radeon Setting: Host Application” program, then install the program correctly. However, a number of tests were carried out by active koristuvachs Danish method didn't help. On the AMD website they reported that with the current update, all software defects will be eliminated.

In 2018, the number of unavailable Radeon video cards was met with an unexpected surprise from AMD programs, as they were informed about the release: Radeon Settings version and Driver version does not match. Please try again after updating to the remaining version(s) , which appears when you try to open the camera panel to change the video card settings.

The Google Translate service indicates that the problem lies in the discrepancy between the driver version and the configured software and recommends updating the video driver to a new version.

I’ll tell you right away, every day, aimed at updating the driver, do not correct the problem. The author of this design has especially tried it more than once outside view video driver in safe mode using the Display Driver Uninstaller utility and further installation of earlier versions of the 18th line, right up to 18.2.1 - the problem was saved. I recommend installing older versions of drivers for those who are not interested, so I recommend spending a few hours every time and then installing this solution.

0. Updating the existing driver

Before you start “dancing with a tambourine,” I recommend that you download the current version of the video driver for your video card model and operating system from the AMD website and update the existing one.

In the depths of my soul I can’t help but hope that the detectives will think about it and correct this mess. On the other hand, in order to save money, it is better to correct them with the latest version, rather than benefit from the work of the outdated driver.

1. Launch the registry editor

For whom the keys are pressed for a short time Win+R (As you don't know, the Win key is the one with the Windows logo on it).

At the window that has opened Viconati, enter the command regedit then press the button OK.

2. Incorrect registry values ​​are corrected.

In the registry editor, we sequentially open the checkbox (folder):

HKEY_LOCAL_MACHINE → SOFTWARE → AMD → CN

In the middle of this folder (folder) you can find the parameter DriverVersion For anyone who needs to see the value. For which parameter is active, simply click the mouse to display the values ​​in the window and save the changed (empty) values.

After this, the registry editor is closed.

3. Stagnant correction

To ensure that the settings are correct, you must restart the RadeonSettings.exe process. The simplest way to do this is to restart your computer.

After re-applying, click on the screen with the right mouse button and select the item in the menu AMD Radeon Settings, the video card panel can be opened without any problems.

AMD Radeon Software Crimson Edition- A comprehensive package of drivers for Windows designed to improve the graphics capabilities of video cards from the leading company AMD. By installing them, you can completely improve the productivity of your video card, provide advanced control over its functions, and at the same time make your video and video game smoother and smoother. In addition, AMD Radeon drivers provide native utilities that make it easier to handle the multimedia capabilities of your computer. A 64 bit version of Windows 10 is available.

Program assignment:

• Improved performance characteristics of AMD video cards.
• Increased capacity for two- and three-world graphics.
• Flexible customization of screen parameters: changing the individual display, color, refresh rate, orientation, etc.
• Possibility of changing the configuration of up to nine desktops.
• Preservation of individual parameters of the skin screen.
• Support for VSR technology – image rendering from a separate source, which is installed in the display settings.
• AMD CrossFire support – combining two or more video cards for increased productivity.
• Smoothes the video stream in games using additional AMD FreeSync technology.
• Managing various programs at an additional desktop.

In other cases, AMD Radeon utilities can assign hotkeys for easy work and allow you to adjust certain parameters of 3D programs, review the performance characteristics of the video.

Installing drivers for AMD Radeon

The package is installed as a primary program and does not require any fine adjustments. The assigned devices (video cards) on the computer are automatically identified using the Autodetect utility. Enjoy AMD Radeon Software Crimson Edition free of charge Russian language is available on this page, all popular versions of Windows are supported.