Disable automatic update in Windows. How to disable Windows Updates Reliable way to change the parameters of the update center

Greetings you, dear friends.

Today we will talk about how to disable updates in Windows 7 forever.

Updates that Microsoft Releases are new components to improve Windows protection and performance. They can be installed both independently and from your confirmation. However, if you are using a not licensed version, the update data may seriously harm you since the deep-maintainable Microsoft company is constantly fighting pirates and creates updates that deactivates not licensed copies of their operating systems.

Two ways to disable updates

• First. You must go to the Windows Update Center ( Start / Control Panel / System and Security / Windows Update Center) Click to the "Settings" item.

Select "Do not check the availability of updates."

• The second way. You must go to the "Control Panel", then we go to "System and Security and find the" Administration "item and click two times the left mouse button on the service. Now we find the" Windows Update Center "- also press 2 times with the left button.

Then in the start type, we set "disabled".

As a result, the automatic update will be stopped forever.

In order for the computer to be rebooted after establishing updates, you will need:

And finally, you need to apply Group Policy Changes. To do this, enter on the command prompt gPUPDATE / FORCE.

Also to disable the automatic loading of the drivers, you will need:

• Click "Save" and then confirm your actions by clicking "Yes", in the pop-up window.

That's all.

I hope the article came in handy. In order not to miss a useful post, you can subscribe to updates.

See you soon!

Observe how to disable Windows 7 or 10 update if it is not necessary. Updates are loaded automatically. They do not "ask" user permits, and simply give out alert that new components are installed. But it can be changed in the settings, then you yourself will choose what to download and when.

Bugs and "holes" may be discovered in the OS, so the developers produce patches with corrections. We recommend downloading all required updates Win 7, 8, 10 and other versions. With updates can add new features or improve old.

But sometimes problems appear with the installed components. In such cases, you need to manually choose which patches you need, and also know how to disable automatic update Windows 7, Vista, 8, 10. This needs to be done if:

• Critical errors appear due to updates.
• The system hangs during component loading.
• Poor Internet speed. You want to download when the network is not busy and the load on it is minimal.
• You do not have an unlimited rate, so you have to pay for each megabyte.
• There is not enough free memory on the Winchester, in particular, on the system disk C: \\.
• You do not have time to wait until everything is checked and installed. You need to turn off the computer and go to your business.
• . No matter what - 10, 8 or 7. The update can block it.
• You are tired of automatic reboots.
• You want to choose yourself, what to put, and what is not. For example, if you do not need language packs, because you and so well oriented in the interface. The patch will only take place.

We learn how to disable Windows updates. In the 7th and 10-ke, the actions algorithm differ slightly.

Windows 7.

• Open the control panel. To switch between viewing modes, click on the right link at the top. Nearby there is a small arrow pointing down.
• Category "System" (if you are inactively displaying on icons).

Control Panel

• Menu "Update Center".
• Section "Settings" (it is left).
• In the window that opens, find the drop-down list "Important".
• You need to "not check for updates". If you want to leave autopo.com, select "Search, but the decision is made by the user."

Setting up update options

• Save the changes and reboot.

After that you will search and install updates. To do this, in the center of Windows Update, click on "Search".

Windows 10.

In Win 10, this is done otherwise.

1. Start - parameters.
2. "Update and Security".
3. "Extra options".
4. Check into the checkbox "postpone".
5. Click the "Select how to receive updates" link.
6. Translate the slider to the "Off" position.

Now the updates will not be automatically put, but this does not mean that they should not be downloaded at all.

Services

Here is another way how to disable Windows 10, 8 and 7 update:

• Start - Programs - Administration.
• Menu "Services". You can also go through the task manager (CTRL + SHIFT + ESC key, the "Services" tab).
• For Windows 10, another method is relevant. Open Start - Run (or Press Win + R). In the Input field, write "Services.msc" and click on ok.
• In the window that appears, scroll to the center of updates.

• Double click on it.
• Click on the "Stop" button.

Click stop

• In the "Startup Type" section, select either "manually" or "disabled".
• Save the changes.
• Restart the computer.

It prohibits the download of new patches. You can activate it through the "services".

You figured out how to disable Windows 10 automatic update, however, updates still need to install. Without them, the operating system will be unstable, because the "vulnerabilities" are eliminated with them - security holes.

The timely update of the system is designed to maintain its relevance and safety from intruders. But for various reasons, some users want to disable this feature. In the short term, indeed, sometimes it happens justified if you, for example, perform certain PC manual settings. At the same time, it is sometimes necessary not only to disable the ability to update, but also to fully deactivate the service that answers it. Let's find out how to solve this task in Windows 7.

The name of the service that is responsible for installing updates (both automatic and manual), speaks for itself - "Windows Update Center". Its deactivation can be performed as in conventional ways and not quite standard. Let's talk about each of them individually.

Method 1: "Service Manager"

Most frequently applicable and reliable way to disable "Windows Update Center" Is use "Service Manager".

1. Click "Start" And go to "Control Panel".



2. Click "System and safety".



3. Next, choose the name of the major section "Administration".



4. In the list of tools that will be introduced in the new window, click "Services".

   

   There is a faster transition option to "Service Manager"Although it requires memorizing one team. To call the tool "Run" dial Win + R.. In the utility field, enter:

   Press Ok.



5. Any of the paths described above leads to the opening of the window. "Service Manager". It contains a list. This list needs to find the name. "Windows Update Center". In order to simplify the task, build it alphabetically by pressing "Name". Status "Works" In column "Condition" Means the fact that the service functions.



6. To disable "Update centre", highlight the name of this item, and then click "Stop" In the left area of \u200b\u200bthe window.



7. The stop process is performed.



8. Now the service is stopped. This is evidenced by the disappearance of the inscription. "Works" in field "Condition". But if in the column "Startup type" Installed value "Automatically"T. "Update centre" It will be launched upon the next time you turn on the computer, and this is not always acceptable for the user who has disconnected.



9. To prevent it, you should change the status in the column "Startup type". Click on the name of the right mouse button item. (PKM.). Choose "Properties".



10. Going to the properties window while in the tab "General"Click on the field "Startup type".



11. From the discussed list, select the value "Manually" or "Disabled". In the first case, the service is not activated after restarting the computer. To enable it, you will need to use one of the many ways to manually activate. In the second case, it will be possible to activate it only after the user will change the type of startup type in the properties "Disabled" on the "Manually" or "Automatically". Therefore, it is the second option of shutdown is more reliable.



12. After the choice is made, press the buttons consistently "Apply" and Ok.



13. Returns back to the window "Dispatcher". As you can see, the status of the element "Center of Updates" in a collumn "Startup type" it was changed. Now the service will not be launched even after rebooting the PC.

How again, if necessary, make activation "Update Center", told in a separate lesson.

Method 2: "Command Line"

You can also solve the task using the command input in "Command Line", launched from the person of the administrator.

But it is worth remembering that this method of stopping, unlike the previous one, deactivates the service only until the next restart of the computer. If you need to stop it for a longer time, you will have to re-perform the operation through "Command Line", and better to take advantage of In way 1..

Method 3: "Task Manager"

Stop update service can also be used "Task Manager".

Method 4: "System Configuration"

The next way to solve the task is carried out through the window "System Configurations".

1. Go to the window "System Configurations" can be from the section "Administration" "Control Panels". How to get into this section, said when describing Fashion 1.. So, in the window "Administration" press "System configuration".

   

   Also this tool can be run from under the window "Run". Call "Run" (Win + R.). Enter:

   Press Ok.



2. Shell "System Configurations" Launched. Move to the section "Services".



3. In the section that opens, find the element "Windows Update Center". In order to make it faster, build a list by alphabet, clicking "Service". After the element is found, uncheck the left checkbox. Then press "Apply" and Ok.



4. Window opens "System Setup". It will be prompted to restart the computer so that the changes take effect. If you wish to do it immediately, close all documents and programs, and then press "Reload".

   

   In the opposite case "Exit without reboot". Then the changes will take effect only after you turn on the PC in manual mode.



5. After rebooting the computer, the update service must be disabled.

As you can see, there are quite a few ways to deactivate the update service. If you need to disconnect only for the period of the current session of the PC, you can use any of the options described above that you consider the most convenient. If it should be shutdown for a long time, which provides for at least one reboot of the computer, then in this case, in order to avoid the need to perform a procedure several times, it will be optimal to disconnect through "Service Manager" With changing the type of startup in properties.

Nothing foreshadowed troubles, as suddenly the computer begins to reboot, and the system persistently asks not to disable the device from the network, because it is set to install important Windows 7 updates.

Surely, at least once every PC user faced a similar problem, and after starting the system, the results of the work of most programs were lost. Yes, this is exactly what happens, a sudden, forced about the update and we lose the data that did not have time to save. Today we will talk about what to do to bypass the party such a situation and take care of the system update or disable forced updates.

How to disable Windows 7 update

As a rule, the usual PC user does not need these updates. They add minor changes to the system of the system, which most and does not recognize. Only sometimes, with a frequency once every six months, Microsoft is introduced into the update something really useful for ordinary users, such as October 8, 2013, the QB2852386 update is released. The addicts the ability to clean up the updates stored in the WINSXS folder. Usually, such important innovations are written in news feeds, groups, forums and portals, so if you are at least a little interested in this, then you will miss such news. So how to disable Windows 7 automatic update?

So, we decided to disable annoying updates. How to do it? To do this, you must perform the following steps.

1. Go to the "Control Panel";
2. Select the Windows Update Center;
3. Next "Setting the parameters";
4. Set the "Do not check the availability of updates".

How to Disable Windows 7 Update

This procedure does not end. If you stop at this step, the updates will still be installed. Microsoft took care that you get the most recent software in time. To complete the update, you must perform several more steps.

1. Open the "Control Panel";
2. Go to the "Administration" section;
3. Run "services";
4. Choose a "update center";
5. In the "Startup Type" section, check the box on "disabled", and then click "Apply".

Automatic update is an important functional feature of any operating system. Thanks to her, the computer receives important updates that make the system more stable and safe. In Windows 7, the function is activated initially. This means that in the presence of communication with Microsoft servers, the update service checks the presence of fresh packets, loads them and installs them. Usually, all processes are actually imperceptible to the user, but when there are permanent offers to upgrade to 10-ki, this is already busting.

Theoretically, turn off the automatic download of updates is not worth it. It is useful because it closes security bars, optimizes the operation of the OS, adds new opportunities to it (regards "Dozens"). There is also a list of reasons for which the auto-update service should be disabled:

1. I don't like the user that during the update it falls the speed of the Internet and / or for a long time you cannot turn off the PC.
2. On the computer, expensive or limited wireless Internet.
3. Problems after starting an updated OS.
4. Failures in the process of installing update packages.
5. The system volume is not enough space to increase the volume of Windows 7 growing with each update.

Views

Still, before turning off the Windows 7 update, think if it really needs it. In addition to deactivation of the service, it can be translated into the following modes of operation.

1. Fully automatic - operations proceed without user intervention, only notifying the latter on the completion of the installation of the packages.
2. Search and download fresh fixes on a schedule, and the package installation is implemented by the user.
3. Automatic check with user notification about updates.
4. Salmon is turned off. Everything is carried out in manual mode.

The parameters are selected in the "Update Center" component.

Methods of disconnection

Settings of any Windows are stored in its registry. Get access to the key that is responsible for setting up the update center, you can several simple and more complex paths. Consider them all.

Changing the parameters of the update center

Let's start with the fact that we will configure the operation of the service under ourselves. To access the configuration interface, you need to open the "update center" in one of the above methods.

System

1. Through the context menu of my computer, call it "properties".

1. In the left vertical menu, click on the corresponding link located at the bottom of the window.

1. We go to the "Control Panel".
2. Open the section "System, Security".

1. Call the same element.

If the control panel elements are visualized as icons, and not categories, the link to the item will be displayed already in the main window.

1. So, after entering the desired window, click "Setting parameters".

1. We move to the "Important Updates" section and select the appropriate option from the drop-down list.

Fully turn off the receipt of updates on a computer with Windows 7 will help only the service stop.

Turn off the service

Management of services in the "seven" occurs by:

• direct editing registry keys, which is very uncomfortable;
• extraneous programs for setting up OS (skip this option);
• snappers MMC console;
• system configurations;
• command line;
• group Policy Editor (present in Windows 7 Maximum, Corporate).

Removing service from autorun

Disabling updates is faster through the system configurator.

1. We perform "msconfig" in the command interpreter window, which will open after clamping the Win + R keys or click on the "Run" button in the start.

1. We go to the "Services" tab.
2. We find the Windows Update Center (may be Windows Update) and remove the checkbox standing near it.

1. Save new settings.

Prior to the completion of the current session, the service will work, fulfilling the task assigned to it. To apply the new Windows 7 configuration, you must restart.

We use the MMC console snap

The system console snap-in provides access to the management of all services on the PC. She starts like this.

1. Open the context menu of the "My Computer" directory.
2. Call the "Management" command.

1. In the left vertical menu, we deploy the item "Services and Applications". Next, click on the link "Services".

A simpler option to call the same window will run the "Services.msc" command via the "Run" dialog.

1. Spread the list of services to the easiest end and open the "Properties" of the Windows Update Center.

1. In the "Startup Type" drop-down list, select "disabled" instead of "automatically", in order to say goodbye to the automatic update forever. If you need to disable the service now, be sure to "stop" clicking. Save new parameters with the "Apply" button and close all windows.

To apply PC settings in a reboot does not need.

Group Policy Editor

Configure any system parameter will help another MMC console snap-in, called the Group Local Policy Editor.

In the home editorial board "Sevenki" it is not available!

1. The tool is started by running the "gpedit.msc" command via the "Run" window.

1. In the PC configuration subsection, we deploy the "Administrative Templates" branch.

1. Open the "Windows components" and looking for the update center.
2. In the right side of the window, we find the parameter, the name of which begins with "Setting auto-update".
3. Call its settings.

1. We move the checkbox to "Disable" and click "OK" to close the window while saving changes.

We use the command line

Through the command line, all the same operations are performed as using the graphical interface, and even more, but in text mode. The main thing is to know their syntax and parameters.

The command "CMD" is responsible for calling the command line.

1. Open the command interpreter and perform it.