Programs and utilities for overclocking. Programs for overclocking video cards

Confirmation
programs: ATITool, ATI Tray Tools and RivaTuner.
2.1. To begin with, enable overclocking blocking in drivers for video cards, which have overclocking blocked (RADEON 9000, 9200, 9600, 9700 non-PRO and 9500PRO reduce frequencies to default when launching 3D add-ons - this is blocked nya patch script ATI Overclocking Antiprotection, Make sure that the cooling system is functioning normally and is fully productive (at the default frequencies, the video card components should not heat up above 37-40 degrees Celsius);
2.2. Install the overclocking program, reboot the computer, select this program and increase the frequency of the video memory and video core by 10-15 MHz, save the changes, then close the program and start the first 2D program, "screw" the window screen to reconvert to the presence of artifacts in 2D mode;
2.3. Next, run Futuremark 3DMark 2001(SE), test 4 (Nature) and/or 3DMark03, test 2 (Troll's Lair) and 4 (Mother Nature - because, of course, your video card hardware supports DirectX9).
2.4. If there are no image artifacts, repeat the procedure and raise the frequencies right up to the first sign of overclocking. In case of artifacts, change the real (without DDR adjustment) clock frequency of the video memory to 5-10 MHz, in case of severely frozen machine and/or fault critical pardon/ settings VPU Recover – frequency of the graphics core. If the signs of overclocking do not disappear during repeated testing, change the frequency of another component. If this does not help, change the frequency of both components to 5 MHz. If this does not bring a positive result, turn on the system, evaluate the level of heating of the components with the back of the bottom, then at times of strong heating, check 10-15 minutes, start the system and repeat the test.
2.5. If the card is constantly overheating during trivial operation at maximum frequencies at which you can undergo a single sequence of tests, look at the possibility of additional cooling system, and also analyze the capacity of the external ventilation of the computer case and us Set the maximum frequency at which the card is designed to operate without overheating . For residual verification of stability at the detected frequencies of the traces, it is necessary to carry out a large series of 3DMark tests and other test programs and programs with constant influence on the video system for at least 3 years. Once you know the maximum stable frequencies, you can set them as stable.

Confirmation Damir[Newbie]
Sensi by installing an NVIDIA GEFORCE MX-9600 video card, becoming 2 GB of RAM, then everything is fine

"Overclocking/Rozgin" tab in the RivaTuner program.

Є effective solution for overclocking video cards: RivaTuner. This richly functional program is not supported by Nvidia video cards; This can be used to overclock AMD video cards. (As you remember, the first Nvidia cards were called Riva. You can read about the history of Nvidia video cards in the article " History of nVidia in video cards: 13 rocks of success ".

Dosing distribution

RivaTuner allows you to overclock the system without any frequency cuts (in any case, you can go as far as AMD and Nvidia would like with a different interface for overclocking in power drivers), and it can also desynchronize the frequencies. The great feature of the RivaTuner programs is that they can change the frequency of shader units independently graphics processor, while other programs may not operate in a manner consistent with the GPU (the frequency of the shader units is set to match the GPU frequency).

The RivaTuner utility can be downloaded. Before speaking, this utility itself was used to regulate the fan speed of video cards of the 4800 family before the release of the Catalyst 8.10 driver.

PowerStrip cannot ignite GMA 950.

One of the oldest overclocking programs is PowerStrip. This utility for managing the graphics options of a PC can also help in overclocking both the video card and the older one. The only downside is that it is not without cost, on the substitution of other programs that we have developed. However, PowerStrip can be used only for overclocking.

The program, how it costs its pennies

The great advantage of PowerStrip is that it works with the majority of video cards on the market, not just models from AMD and Nvidia. You can launch it from the Windows command panel, which means you can set the required parameters either through the drivers. In addition, PowerStrip can adjust a variety of display parameters, such as refresh rate, and even more importantly, separate output: a necessary option for some HDTV users.

You can find the PowerStrip program.

ATI Tray Tools and ATITool - two different programs

The two modern utilities may have similar names, but in reality they are completely different. ATI Tray Tools only supports AMD video cards, and ATITool (if released) name, what to say) works with both AMD and Nvidia models.

ATITool and test images.

This program is for overclocking a wide range of Nvidia and AMD video cards and is of interest for one reason: it renders 3D animation, which is so popular graphics core Video cards allow you to check how they are working on overclocking the way to detect artifacts. It also has a function that determines the maximum frequency that the GPU can accept (similar to the Auto-Tune function of the Catalyst driver).

The latest version of ATITool can be downloaded.

ATI Tray Tools only for AMD

ATI Tray Tools. Click on images to enlarge.

This small program is located in the system tray (seeds and names) and helps to update AMD video cards (more ATI ones). ATI Tray Tools has one small problem: its function for calculating the maximum frequencies is too optimistic, which can lead to failures. Like other programs, this utility is designed to save profiles that can be linked to other programs, for example, a profile for gambling, a profile for office programs etc.

Updated versions of the ATI Tray Tools utility are available.

ATI Tray Tools F.A.Q.

Rozgonu module

ATT does not allow increasing the frequency of the video processor! What is it timid?

We go to the settings of programs (Tools & Options) in the General Options tab in the Overclocking Limits section, increasing the Overclock limit. The maximum permissible frequency is 50% plus up to the frequency of flashing the video card BIOS.

What can you safely change in timings and without damaging your video card?

You can change any timings, but do it very carefully, otherwise you can damage your video card. There is no universal method for editing timings. Each type of memory has its own timings, as well as its expansion potential.

What to use option Clock generation method

ATT can fire the card in two modes.

• High Precision - Precise overclocking mode, with which ATT the required frequency will be calculated to achieve precise results at a given frequency.
• Low Precision - Mode of inaccurate reception at a given frequency. In this ATT mode there is no calculation, but rather a standard value. For this mode, change the frequency to 6.75 Mhz

What is the Calculate button?

This button allows you to view what ATT is calculating for a given frequency. How can you become a vikorist? When overclocking the video card, it is important to keep the speed to a minimum. With a hired worker you can achieve the greatest stability. Using the Calculate button, you will now be able to control which timer will be taken at the required frequency.

Which dealer is selected when you press the Set Default Clocks button

When the value is set to ATT, the standard value for the video card will always be used. It does not matter which mode is used to accelerate the selections.

Which 3D API is vikorized by 3D Renderer

ATT vikorist OpenGL for rendering 3D scenes and HLSL as shaders. For shaders to work, support for pixel shaders version 2.0 is required. I want the shaders themselves and not to vikorize all the possibilities of PS 2.0 OpenGL driver ATI has its own support for various OpenGL extensions. They are only activated due to the presence of hardware support for PS 2.0. About to launch on cards without PS 2.0 support. ATT will highlight another scene based on the vision and technology of Environment Mapping.

What is the best way to use an artifact tester?

There are many ways to find the most stable video card frequencies. Unfortunately, there is no ideal among them and it is unlikely that there will ever be one. I can please you with the following crumbs:

1. We reset the frequencies to the frequency for the promotion (Set default clocks).
2. Launch 3D Renderer.
3. Check out the hell out of five, hi card, it’s good to warm up.
4. We start searching for maximum GPU frequencies. The result is memorized.
5. Once again we are dropping the frequencies to the frequencies behind the promotions.
6. We start searching for maximum memory frequencies. Frequency selection is memorized.
7. From the selected frequencies, we select 2-5 MHz and you can start testing in games and all your favorite 3DMark packages.

Which video cards are supported by ATT to manage cooler wrap control?

ATT supports ceramic wrapping on video cards equipped with LM63 sensors, as well as video cards from ASUS equipped with a FinTEK sensor. Video cards equipped with a WinBond sensor (made by Gigabyte) are not supported yet.

Game profiles

How to create a game profile

Go to the Game Profiles->Manage Profiles menu. Embossed on the New button. You will be required to enter the configuration file as a file. To do this, click the right-hand button in the Executable field. Find the file in explorer.exe (for example, HL2.EXE) and click OK. Next, enter the profile name. Try not to use the letters '/' '\' '?' in the profile name. '|' '"' '*' ‘<‘ ‘>' ': ' so the stench will all be replaced by the sign of the chair at the hour of writing. Then select any 3D profile to create the image. In the list You can also set individual 3D settings for this game, for which from the list of profiles select Custom Settings and press the right-hand button to select profiles. On the Hardware tab you can specify which profile to activate for this game. If you have the Auto 2d/3d Overclocking mode selected, you can select Auto 2d/3d. If you select Take no action, ATT will not disable the card because this game is in 3D mode, and you have the Auto 2d/3d option activated. To correct the color profile of the game, you can specify which color profile to select from the list of color profiles and tick the option Force to use color profile. In the Additional tab you can configure additional options for the game, such as:

• Exit from ATT after finish - Exit from ATT after completing the game.
• Switch desktop resolution to — Change the separation of the desktop in front of the grill.
• Disable OSD support - Disable the use of the OSD module for this game.
• OSD X/Y Offset — Specify the offset for displaying OSD information for the X and Y coordinates.

There is also an option to force a triple buffer for games that use Direct3D API 8 or 9.

Do I have to launch the game through the ATT menu or create creations through the Game Profiles shortcut, so that the adjustments I have specified are stuck?

There's no way to be timid. ATT has a unique system for automatically identifying running programs, with all settings for sundry gree get stuck automatically. You can launch a load from any place. The only rule for compiling a file for games is to blame for this catalysis itself, depending on what is indicated in the game profile.

Why bother with the Delete outdated game profiles button?

There is a button to help you recover old game profiles. When clicked on it, ATT will scan the list of game profiles and select a list of these profiles, for which there is a separate .exe file. And then ask for confirmation to delete the games you have found that are not available from the main list of game profiles.

Why can I choose only one 3D profile for graphics on my computer, but my friend has two options for Direct3D and OpenGL?

ATT can be used in two modes. Standard, whatever you have installed Catalyst Control Panel in CCC mode if you have Catalyst Control Center installed. In the remaining mode, all settings for 3D graphics are displayed in one window and at a time. You can select only one game profile.

Do you need to create a shortcut for Gris via the Create Desktop Shortcut button?

Who has no needs. ATT has an option for automatic identification of running programs, in which you can launch the program from any place or in any manual way for you. When a game is detected that is registered in the game profiles, ATT will automatically complete all necessary adjustments and complete the game to rotate the settings to the forward values, as you have explicitly indicated to operate, this Restore previous settings after game end.

I force the color profile to be used for gris, but the result is not visible. What's the problem?

Richly igor vikoristova launcher. An example can be Half-Life2, which is often launched via Steam.exe or hl2.exe itself. If you do not have the option to force the color, then you have entered the configuration file for the color incorrectly.

I specified overclocking for Auto 2d/3d in the options, but the card does not overclock when I start the game!

If you specify in the game profile options to enable Auro 2d/3d ignition, the Auto 2d/3d system itself may still be activated, otherwise ATT will not be able to ignite the card for that game. When the auto 2d/3d module is enabled, it is recommended to select a ready-made expanded profile.

What does forcing triple buffering do?

If you do not enable Vsync, you do not need this option. However, if you turn on Vsync, then the number of frames in your game will be divided by the firing frequency of either half, or half of half, and so on. Then, with Vsync=60 Hz, your FPS will be either 60 or 30 or 15. This is how the system of marking and reversal work works. To prevent the third buffer from becoming stagnant, we can call it a spare one. When forcing triple buffering is enabled, you will not have any more drops in FPS, since if the card is not able to paint the frame, then the next frame will not be wasted, but will be stamped into the third buffer. You can find detailed information on the Internet.

OSD What's this?

ATT has a unique OnScreen Display system, which allows you to display a wide variety of parameters directly into the game scene.

Basic settings allow you to turn off or turn off the OSD completely, as well as block the display of OSD information during the creation of video files. Adjustment of the screen area for displaying OSD information, as well as an option for time-sensitive display of information. The OSD consists of two modules.

1. FPS Meter- The module shows the speed of painting in frames per second. You can choose how to process there are a number of marked frames.
   • Continuous— a preview of the mitt FPS, this mode does not display how many frames were actually stamped per second, but shows how many frames were stamped per second, as if the next frame was completely identical to the in-line one.
   • Every second— This mode displays the actual number of missed frames per minute.
2. FlashOSD— this information module allows you to display information about the exact frequency of the card, temperature, amount of video and texture memory, and also allows you to connect external OSD plugins to display any formats. The ATT warehouse includes the OSD Motherboard Sensors plugin, which allows you to read and display information from popular diagnostic programs, such as Motherboard Monitor, SpeedFan, PC Probe. FlashOSD has a number of display options:
   • Auto flash- Visnovok will be carried out on the skin of X skin for XX seconds.
   • Show all time- Visnovok is walking steadily.
   • Manual- Visibility only on the hot key.

I turned on show all FlashOSD options and now I can play games!

Whose trace was to be checked :). FlashOSD is a very important module for marking, and therefore I strongly do not recommend including it for live display! This module is practically not amenable to optimization, since introducing it into someone else's program can cause non-transferable results! on Narazi ATT is the safest of all decaling methods, ahead of the problems with the FRAPS program, and is also the most difficult for a video card. When displaying FPS, there is practically no emphasis, because when displaying 8888, only 20 straight-cut ones will be displayed (as standard fonts for displaying FPS are used). When stamped with FlashOSD, the number of orthocutaneous species that are stamped increases in number of times!

How can I replace the FPS healer position?

There is no global setting for changing the standard position of the FPS doctor and text information of FlashOSD, but you can create it for a specific game by creating a game profile for it and specifying offsets along the X and Y axes. є the beginning of the coordinates from the upper left corner of the screen, and OpenGL from the bottom left.

Direct3D Settings

I don’t really know what’s going on in Direct3D. What should I do?

Most settings in Direct3D mirror the basic settings in the Control Panel. There is no need to describe everything, since on any site you can find a great deal of information. Speed ​​up by searching.

Explain the Direct3D configuration add-ons.

Additional adjustments can be seen, for example, optimization of anisotropic and trilinear filtering. This optimization gives increased productivity with little loss of vigor. I cannot determine what happens when these options are enabled, since optimization is not described anywhere.

I feel like Frame Treshold for TAA doesn't work new versions Katalista. Is it true?

READ ALSO: How to set up ez cd audio converter correctly

None of this is true. Frame Treshold is happening now and, perhaps, will happen again. The main purpose of this is to set the FPS value threshold at which Temporal AA is enabled. The value for the game is 60 FPS.

Explain the Catalyst A.I.

As well as optimizing anisotropic and trilinear filtering, the Catalyst A.I. not described anywhere. The main function of this option is to optimize the specific supplement. Catalyst means launches additional by name condensed file it vibrates the songs of “machinations” to increase productivity.

Why is Refresh Override not used again?

This option only allows you to earn the same things that can be earned through the dxdiag.exe program. Catalyst drivers do not provide a built-in option for vertical storage. ATI Tray Tools are more I'll push the system- Refresh Lock. Yaka pratsyuvatime zavzhdi.

Flip Queue Size. What is this option?

This option is similar to the option in nVIDIA drivers - Prerender limit. This option allows lag to occur when vertical sync is enabled.

Explain on the butts the options for Anisotropic Filtering and Antialiasing.

Anisotropic Filtering- Anisotropic filtration, in simple words Allows you to paint the brightness of the picture on distant parts of the scene. Axis two are screenshots with anisotropic filtering turned on and on.

Antialiasing- Zgladzhuvannya. Allows the effect of “bats” to occur at the edges of polygons. Screenshot axis. The first one is with wet smoothing, the other is with thickening smoothing (level 6x).

Access archives of these articles in CHM format from the site adsl.kirov.ru

News from the Internet Amura

Parodies, tricks and duels of forum members Andre

ADSL renewal ADVOKAT_043

LEGAL ASSISTANCE TO WATER AND LEGAL PERSONS. Aleks_Cw

Sony Xperia M Dual Aleks_Cw

Computer accessories Nik_vr

Autoflood. Stories of successful leaders Picasso

Increased bass tension on TDA7293 and TDA7294 Picasso

Do-it-yourself speakers and boosters

now online: 47

At technical support VAT "Rostelecom".

Dzherelo: http://www.adsl.kirov.ru/projects/articles/help/hard/video/ati_tray_tools_faq/

ATI Tray Tools: replacement RivaTuner

After starting the program, it is placed in the system tray and provides manual access to its functions through an additional menu. With this, you can also change the frequency of the chip and memory, adjust the frame rate of the screen, adjust the screen parameters and much more. An undeniable advantage is the ability to create profiles for different add-ons and types of new information about AGP, PCI slots and your video card. All settings are grouped around points, of which there are 16 pieces.

Golovne program menu

Since ATT has more insurance coverage for merchants, who know what they want to get rid of, it often contains shortcuts and concepts inaccessible to a simple merchant.

We are focusing on the main parameters, which need to be explained.

• Direct3D Setting up video cards for Direct3D programs. Includes 13 items:

  Antialiasing The method of processing pixels so that the edges of objects become sharper is known as the “scraper effect.” You can choose the values ​​2x, 4x, 8x, 16x and Application Controlled. With a higher value, the image becomes larger, and the video card becomes more demanding, and, consequently, productivity decreases. When Application Controlled is selected, programs themselves control the launch of Antialiasing mode;

  Anisotropic Filtering – a method of filtering textures, in which textures applied to polygons located under the screen become clearer. You can choose the values ​​2x, 4x, 8x, 16x and Application Controlled. When the value is increased, the image becomes brighter, but the fluidity of the trivial scene processing decreases. When Application Controlled is set, programs themselves control the launch of Anisotropic Filtering. You can also select the type of optimization of anisotropic filtration (Performance, Quality and Quality with Full Trilinear);

  Texture Preference- Select the level of textures. Accepts the values ​​High Performance, Performance, Quality, High Quality;

  MipMap Detail Level – This setting enhances the image's vibrancy, vibrancy and textures of different separate objects for different objects of the same image in relation to their size. When an object is distant in a three-dimensional scene, textures with low separate values ​​are emphasized, and when close, with higher ones. MipMap Detail Level accepts the following values: High Performance, Performance, Quality, High Quality.

  Wait for Vertical Sync – Since this parameter is disabled, the number of frames per second does not exceed the frame rate of the screen. Accept the values ​​Always On (always enabled), Always Off (always disabled) and Application Preference (selected by the add-on);

  TRUFORM– Allows you to enable variable surface geometries in a higher order to create more detailed and realistic surfaces and characters in the appendages that support TRUFORM. It accepts the values ​​Always Off (always selected) and Application Preference (selected by the program);

  Refresh Rate Override – Allows you to select a song frequency for all Direct3D programs. Accepts the values ​​Disabled (enabled), Same As Desktop (desktop frequency) and Custom (allows you to choose the frequency yourself);

  Flip Queue Size – allows you to set the number of frames that will be rendered ahead of the buffer. If necessary, frames will be displayed on the screen. You can help with speedruns if the FPS is faster. So, for example, the game sees 50 frames, and at the moment of vibration, it drops for a second to 25. To avoid any jerking, the video card will then process the frames with the vibration, which allows you to minimize the drop in FPS. Accepts values ​​0, 1, 2, 3, 4, 5 and Undefined;

  Alternate pixel centers— allows you to get rid of problems with unreadable fonts in various add-ons;

  Support DXT Textures – includes support for DXT textures;

  Support Bump Mapping- Enables bump mapping support. This technology provides additional detail and volume to objects without changing their geometric dimensions due to the structure of normal maps.

  Optimizations – filtration optimization:

  Enable Anisotropic Filtering Optimization- Enable optimization of anisotropic filtration;

  Enable Trilinear Filtering Optimization- Increased optimization of trilane filtration.

  Catalyst A.I. - for skin program CATALYST A.I. selects the most suitable rendering mode. Three modes are available: Off (low), Low (low brightness), High (high brightness);

  Settings – Here you can select all your settings.

  Direct3D Profiles- Select Direct3D profiles. There are three meanings to the profile:

  Auto Balanced

  Max Speed ​​– maximum fluidity.

  OpenGL— Adjustment of video card for OpenGL programs. Includes 11 bookmarks. Most of them are similar to settings in the menu Direct3D.

  1. Antialiasing
  2. Anisotropic Filtering;
  3. Texture Preference;
  4. MipMap Detail Level;
  5. Waitforverticalsync- vertical synchronization. Accepts the following values:
     1. Always Off (zavzhdi vimknena);
     2. Always On (always on);
     3. Default On (for cleaning up);
     4. Default Off
  6. TRUFORM;

Force Z-buffer depth– Primus installed glibin Z-buffer. You can set the values ​​Disabled, Force 24 bit, Force 16 bit;

Additional options – additional adjustments. Enable triple buffer;

OpenGL Profiles- Select OpenGL profiles. The following values ​​have been entered:

Auto Balanced – automatic adjustment yakosti;

Hardware- includes training for overclocking and video card monitoring;

• WRlatency;
• CASlatency;
• CMD latency;
• Strobe latency;
• Additional memory parameters:
  • TRCDRD;
  • TRCDWR;
  • TRP;
  • TRAS;
  • TRRD;
  • TR2W;
  • TWR;
  • TW2R;
  • TW2R SameBank;
  • TR2R;
  • Memory Refresh Rate and TRFC

  option Include In Profile Indicates that you have made adjustments to the value of the settings in the profile.

  Fan tab– here you can set the parameters of the robot cooler on the video card. There are two modes: automatic (the parameters of the robotic mode are set lower) and manual (the wrapping speed is set in the winder). In automatic mode, when the temperature changes, the winding speed of the fan automatically changes.

  Auto Overclocking – includes the function of automatic tuning of 2D and 3D frequencies. For what's on the menu For applications required 3D mode load this profileі After application finished, load this profile for 2D mode It is necessary to create accelerator profiles for 2D and 3D add-ons. Menu Play sound when entering 3Dі Play sound when entering 2D Allows you to create sounds that will play when 3D and 2D add-ons are turned on.

  General Settings- Changes the latency of the PCI video card; there are two checkboxes in the menu:

  Apply hardware settings at start up— change the settings before starting Windows every time

  Restore after suspended mode— updates changes when exiting the cleanup mode

  SMARTGARD– setup and acceleration of AGP and PCI slots;

  System Information– system information about video memory and PCI and AGP slots;

  Motherboard Monitor- Shows the voltage on the motherboard, as well as the winding speed of the fans;

  System Tray Hardware Monitoring– display the parameters of the flow temperatures of the tray;

  Monitoring Graphs- allows you to visually monitor changes in frequencies and temperatures of the video card, as well as the speed of the fan and the speed of the central processor.

  Tweaks– this menu is intended for more detailed adjustment video cards:

  Standard Tweaks– adjustment of such parameters as PixelVertex Shader Version, Geometry Instancing, Force Mip-Map Filtering, HyperZ. It is also possible to enable the following options: VPU Recover Disable DMA, Copy Disable Block Write, WMV Acceleration. It is not recommended for uninformed customers to make any changes to this menu;

  Advanced Tweaks– allows you to change more than a dozen settings in such sections as Display Tweaks, Advanced D3D, Advanced OGL, CCC Mode Switch, Video Tweaks ta in.

  Hot Keys– in this menu you can add hotkeys for different functions (changing the separation, brightness, contrast, changing profiles, etc.)

  Plugins- Connection of external modules.

  Run Time Plugins- Insert two Run Time plugins:

  CPU Load Meter- Displays the status of the processor in the system tray;

  PCI Set Plugin- With this plugin, you can create a list of PCI registers that are assigned when the computer starts;

  HDD Temperature- Displays the temperature of the hard drive in the tray.

  Settings— this menu allows you to adjust the parameters of monitors and TV-Out;

  Exted Desktop- Enables extension of the desktop to another monitor;

  Reset Display Driver– reinstall the monitor driver;

  Turn off monitor- The monitor blinks;

  Display Properties- Shows power to the screen;

  Default Single Display— Updates the video card setup for a single monitor.

  Refresh Lock– in this menu you can set a fixed refresh rate for the monitor on a separate part of the screen

  Refresh Lock window

  Rotation – rotate the image on the screen

  Default 0– the image position does not change;

  To Right 90 – the position of the image changes by 90 degrees behind the year arrow;

  To Left 90 The image position changes by 90 degrees opposite the year arrow;

  180 - The image position changes by 180 degrees;

  Colors- In this menu you can change the monitor settings such as brightness, contrast, gamma;

  Tools& Options– how to adjust the video card and desktop

  Save Desktop Icon Positions- Preserves the exact position of shortcuts on the desktop;

  Restore Desktop Icon Positions— saves the position of shortcuts on the desktop.

  OnScreen Display– allows you to configure the display of various video card parameters on the screen.

  General Options– here you can set up robotic programs.

  About– information about the program

  Exit- Exit from programs.

  ATI Tray Tools Vs RivaTuner

  The first thing you encounter when launching these programs is the much more user-friendly and user-friendly interface of ATI Tray Tools. All necessary settings are grouped by topic and can be accessed by pressing the mouse buttons. Another great advantage of ATT lies in the richness of the connection with RivaTuner. The program allows you to increase the frequencies of the core and memory and at the same time check whether artifacts did not appear during overclocking (for these purposes, use the Artifact tester). The ability to change memory timings, as well as fine-tune the fan speed depending on the temperature.

  A unique advantage of ATT is the creation of profiles. You can fine-tune your video card to suit the skin program. In this case, RivaTuner looks really bad, although it also has some minor advantages: changing the registry settings, displaying back to the list drivers, compatibility with ATI and NVIDIA video cards (this may be the biggest plus). ATI Tray Tools retailers frequently innovate their product and add new features to ATI's new solutions.

  Little things about rozgin

  To begin with, you need to ask yourself: why do you need fire? If you have a Hi-End video card in your home, there is no particular reason to worry about it. The virobnik has extracted all the juices from it, the same gaming add-ons that will help to overcome all the difficulty of today's graphics chips, it turned out not so richly, or rather, just a few.

  Otherwise, if you have a video card in the lower or middle price range (for example, Radeon series 9600-9800-X700). The manufacturer specially reduces the speed and functionality of the youngest models to reduce their performance. We will briefly describe the method for overclocking a video card using ATI TrayTools.

  When overclocking a video card, we have three options: either increase the chip frequency, or increase the memory frequency, or both. Which component has the greatest sensitivity depends on a specific video card. Some models suffer from a lack of memory bandwidth. In them, it is necessary to raise the memory frequency, but the memory requirement cannot be raised to extremes, since the microcircuits set the threshold of frequency characteristics, and also take into account the peculiarities of the board layout.

  The biggest challenge to overclocking is overheating, so install a good fan behind it if you want to push the card all the way. It is important to know the source of your memory. For statistics, Samsung memory is less resistant to overclocking, less Hyundai/Hynix, Ascend or Micron. Brands such as EliteMT and EtronTech are even more popular.

  For some cards, it will be advantageous to overclock the chip, although the frequency is subject to technological standards or intense heating.

  In order to start the fire, you need to open the item Hardware->Overclocking Settings. Then you need to set the frequency generation method: Low precision or else High precision. Please select the remaining one, so when you press the button Calculate The shortest card available for your video card is calculated. High precision method.

  Then we have two sliders, which indicate the frequency of the chip and memory. Here comes the most important moment - the selection of frequencies at which your card will work reliably. If you do not have enough information about setting frequencies based on memory labeling and cooler configuration, then it is better to raise the frequency by 15-20%.

  First, raise the chip frequency first, and then the memory frequency. After skin swelling, run a recall test to detect artifacts at a wide range of frequencies. When bright dots or other artifacts appear on the screen, you must quickly rotate all the values ​​on the page to eliminate the frozen computer (button Set Default Clocks). It is also recommended that you test the fired system on game add-ons or else synthetic tests, Such as 3DMark20032005 (2006).

  It will take a lot of time, because artifacts may not show up after 20-30 weeks. For better knowledge, you can use the GLMark benchmark. To detect a bug, you need 4-5 attacks. If artifacts are not marked on the screen, move the frequency again and run tests again until you find the maximum overclocking parameters. If you have already pushed the card to the maximum values, your settings must be saved under one profile and placed in the Load Selected Profile At Startup row.

  In conclusion, we can say that if you need a small program for overclocking, adjusting and monitoring your video card, then ATI Tray Tools is definitely your choice.

  Read also:

• Amazing smartphone with a 6-inch screen
• The biggest flagship with two cameras
• Amazing smartphone with a curved screen
• The most popular text recognition programs for iOS

  Dzherelo: http://xdrv.ru/articles/software/3/full

  Adjusting the video card for Battlefield 3

  ATI Tray tools, this is a utility for adjusting the productivity of video cards Radeon family, We will help you and we will promote this value.

  You can buy your own video card like Crossfire ATi HD6970, for playing in Battlefield 3, we will adjust those that є.

  Let's take a look expanded setup of ATI Tray tools, I think it’s not important to go over the main ones.

  Wonder what you can earn for advanced FPS in game mode.

  Frames Per Second (FPS), the number of frames per second on the monitor screen as seen by the video card and computer.

  The greater the value, the less you will be stuck in the game, and it is natural to find ease and contentment.

  Take a look at the improvement of productivity at its best.

  Triple Buffering Required if you use VSync in games. If you install VSync on the game, you will lose the brightness of the picture through the “image resolution” option, and your FPS will also drop by as much as 50% due to the upgrade of the graphics card, which requires you to synchronize the picture first. on the monitor. . Triple buffering allows you to avoid wasting FPS when VSync is enabled, which is only available in OpenGl. To enable triple buffering in Direct3D games, you can quickly use the RivaTuner program

  Flip Queue Size indicates the number of frames that are calculated in advance. This option may result in sudden drops in FPS. U in various games optimal different values. For most outputs, it is recommended to set the value to 2. If you have a high-core cell, setting the value to 0 may reduce productivity.

  Anisotropic/Trilinear Filtering Optimizations. When it is turned on, the fluidity will move up (since you have a good airflow, the anisotropy may be available for free), you will lose the brilliance of the picture and, after all, do not mark it.

  Adaptive smoothing– allows you to apply anti-aliasing not to the entire image, but only to the edges of the objects. The result appears to be complete smoothing and product productivity.

  High-viscosity anisotropic filtration is available on the X1000 family and also significantly improves the anisotropic capacity, otherwise you have to pay lower FPS

  Adjusted texture consistency and level of detail MipMap- Well, it’s clear that most of the time the yakism is lower than the FPS

  VSync (vertical synchronization)– I recommend setting Always Off

  DXT compression support- Texture compression without waste to save video memory bandwidth, you need to turn it on.

  Geometry Instancing- Acceleration of “geometric” structures. It is necessary to include the stupid one, besides the old vids.

  Catalyst AI- Includes driver optimization for a specific game. If the value is set to “High”, the brightness of the image may decrease. I recommend "Low".

  LOD (Level of Detail) textures. Vishche - gіrshe. Setting the FPS level to high values ​​will make it IMPOSSIBLE. Experiment with values ​​ranging from -1 to 1.

  One required parameter is available in the section Rozgin and card installation/Basic setup. Vin is called PCI Latency. PCI Latency is a function of a specific AGP or PCI device before upgrading to the main system bus. To activate it, you need to check the box “Lock setup at startup”. This option is available for AGP video cards, not PCI 🙂 and PCI-Express. With a lower option, your average FPS may change, or increase slightly, and your game will run more smoothly. The recommended value is 128, otherwise you can select the optimal value for your video card.

  You can also find important settings in the Settings/Standard settings menu.

  Shader version– This is required for emulating a video card with lower shaders. For example, your video supports 3.0, but to improve productivity, you can install 2.0, then the card will be expanded with the third shaders and the FPS will increase. Please be respectful, and there is plenty of evidence for support singing versions shaders, and whichever you prefer more old version, you will not be able to play this game.

  Optimization of shader code– It’s easy to tighten this up and speed up the processing of shaders of any version.

  MipMap filter injection– in some games you can freely paint the brightness of the textures, but here, on the off chance, you can spoil it.

  Z squeeze mode— Adjusts texture compression via Z-Buffer. Setting a higher value can color the smoothness, but still bring the pictures to a standstill (though I won’t mention any problems, only artifacts will be overclocked :))

  Fast Z Clear– This option is always enabled and ensures that the Z-buffer is cleared.

  Z Mask- Protects the Z-Buffer by filling it with unnecessary information. For good measure, it’s much easier to work with this option enabled.

  Z Top Disable- It’s not clear that this function is working, but it’s disabled for reasons.

  VPU Recover- allows you to reset the video frequency to default during overclocking; in fact, this function is limited, turn it on.

  Disable DMA Copy– activating this option may result in a decrease in productivity.

  Disable Block Write– In some cases, turning on these options can raise the FPS, but I still don’t recommend it.

  WMV Acceleration– allows the video card to process WMV video, which is processed by the processor. I recommend turning off this option.

  Now go straight to Customization / Expanded Customization / Advanced Direct3D Tweaks. These adjustments are performed in DirectX games, but not in OpenGl. Return your attention to such parameters.

  Fast Color Clear– enabling this option will increase productivity without wasting power

  VoltxEnable- Volume texture enhancement must be turned on.

  Color Compression– compression of information to save video memory without wasting capacity. You need to soak it up.

  Export MipMap Cube Maps— This update may provide support for Mipmap textures on Cube maps. Cube Maps are required to show the image of the middle on static surfaces with minimal loss of productivity. This option must be turned on after the procedure, but you can turn it on here in order to remain in the best position :).

  Line AA Enable– Includes smoothing for “line-like” objects (be it power lines, laser exchanges). At the cost of some loss of productivity, it is possible to produce such objects with fewer parts.

  Enable Raster Guardband– A technology element of Hardware T&L Guard Band Clipping, which allows you to remove invisible objects from 3D maps. This option must be turned on after the procedure, but you can turn it on here to remain in the best situation.

  Force Compressed Stencil Buffer– Increased compression of the stencil buffer of shadows. By activating the option, you will deny the increase in FPS, but in some games some artifacts may appear.

  Support for Non power of two size textures- Support for textures of non-standard sizes, which must be turned on

  Support for Displacement Maps— Displacement Maps are used in new games, so the option may be disabled.

  Adaptive NPatch Support– Npatch is a fragmented ATi technology that allows you to capture more realistic curved surfaces without wasting polygons, and thus without wasting FPS. I recommend turning it on, even if NPatch is used in such mega-games as Oblivion and NWN2.

  Tiling Settings– these are the parameters for coating the surfaces of objects. Decrease all parameters of this group, fragments of the stink may be used in some games to improve the picture or speed code.

  Now gain respect for Advanced OGL Tweaks, which works even better in OpenGl games.

  DitherAlpha– If you turn it down, the color transitions will be more smooth. If you turn it on, the fluidity will increase, but the color gradation will be noticeable.

  Export OpenGL 2.0 Procedures– will provide support for OpenGL 2.0, which may be disabled.

  Basic parameters for setting up NVIDEA family video cameras using additional programs Riva Tuner Let's take a similar look at the same actions. You can access the settings at the following address: Driver settings/Direct3D settings/or OpenGL. I think you’ll figure it out easily, just gain respect in your job.

  “Mipmapping” tab. Here you can block the negative UD to increase the brightness of the picture in AF mode.

  "LMA" tab. Z-buffer compression must be turned on to effectively increase speed without sacrificing speed.

  On the "Vertical synchronization" tab, you can, first of all, turn on VSync, and otherwise, raise the prerendering limit to 2-3.

  On the Textures tab, you can leave it without changes, except for the level of anisotropic filtering, which you can set to 16, if you have a good video card.

  Tab “Smoothing” Use the “Smoothing” option to smooth out clear textures. I recommend setting “Multisampling” here. Now the mode with smoothing will clearly show a reduction in the clarity of the image, but in terms of productivity there will be little impact.

  If you don’t get enough of this and you feel like a real hacker, you can try to increase the frequency of your video card.

  Rozgin – axis shortest method increase the productivity of your video card! You can report on this process at Overs, but I’ll write it down here. Like a butt, let's look at the fire for help ATI Tray Tools. Ozh, Pokrokova kerivnitsvo thoughtful koristuvach:

  1. Install ATI Tray Tools.

  2. We go to the window to set up the acceleration.

  3. Press the “Show 3D window” button. Please take a look at the picture, don’t forget to keep an eye on the temperature of the GPU (core). If it goes beyond 80, then you can forget about heating until you change the cooling system. If the temperature is acceptable, then continue on the right.

  4. Select 3D frequency change if your card supports different frequencies.

  5. There are two steps in front of you - core frequency and memory. Frequency grievances affect the productivity of the card.

  6. We choose for the help of a child’s treatment, which frequency is promoted first (core and memory).

  7. Raises the video frequency by 10. Don’t worry, the video won’t burn out; at the end of the day, it’s time to use the charming Reset button. Onslaught "Zastosuvati".

  8. Press the “Show 3D window” button, and then the “Scan to Artifact” button. Check out Khvilin 10, all this hour the artifacts are not to blame! If the doctor does not take 10 tests and discards, having discovered artifacts, we lower the frequency a little and go through the check again.

  9. Once the verification is successful, we move the frequency within a range of 5-10 MHz, after the skin movement we go through the verification, in this way we find the maximum possible frequency at which we start.

  10. Repeat steps 7-9 for another component.

  11. That’s it, the video is turned on, press OK and launch the powerful game. Grazmo Godni DVI, the whole hour of artifact Boti is not guilty (Yakshcho Vi is not in the Row, Artifakti - Tse Rizni Chorni Smalls, Bil Krapsi, Merekhtynnya Texture Tu Inshi anomalii), Inaksha frequency.

  12. If step 12 is successful, then go back to the overclocking menu, click on the “Save profile” button, and save the profile under each name. We put a checkmark next to the items “Set up the profile together with ATT” and “Set up after sleep mode”.

  13. Go to Utilities and setup/Basic setup of programs and autorun ATI Tray Tools. If not, then check the box next to Windows.

  That's it! Your video card is overclocked, enjoy increased productivity!

  Entertain ATI Tray tools

  More on the topic Adjusting video cards for Battlefield 3

  

  

  

  

  New comments

  CHANGE NVIDIA CARD..... Kindly help. The game hangs at home and the sound is the same. Exit one perezavantazhenya...Grate to exit at 15-20 minutes ((

  Check the processor and video card for overheating

  RAM no less than 4GB

  And there may be a lot of reasons, register on the forum, describe your computer, we will help.

  Kostyantin, I’ve been trying to register there for ages now (((After pressing the “Register” button, the site writes “side not visible”(((

  I've already tried everything... Compopoperative 5GB. Video 512mb. Because everything on the right was overheated, the other fragments didn’t help... I sound card having turned on the vbudovana, they said that she was in conflict with the game, it turned out to be unnecessary (so 15-20 hvilins and vilits ((((((((((((9 I’m already all on my nerves, all the forums are unique, but people are smarter) you invest correctly

  You need to write in English, try it. If you can't see it, knock here, tell me by mail, I'll give it to you

  Most of the cards on all my cards have cubes, so all the land is a little black color, and there are cubes with normal graphics on it, so what could I do if I had a normal graphic?

  ATI Mobility Radeon HD 5165 video card

  We have updated drivers, DirectX and Windows

  I have less power after 5 hvilin.system amd fhenom 9500 2.2 mm Asus card gt440 with a lot on board Windows 7 -32, having tried everything on the forum, new firewood in origin, installation corrected no effect... you can also help with a patch for the 400 series. On the gt 9800 geforce everything worked fine without a glitch c.

  Check for overheating.

  overheating is no more than 40 degrees throughout.

  Can you turn on the antivirus altogether? I have Avast 7 Vin vzagali not very powerful.

  Add a connection and origin just in case. Still in the adjustment of the origin, the post “Don’t vikorize from the people”

  here is now new Game disconnected: you were kicked by an admin. Statement: Sorry, citizens of the Russian Federation cannot influence the development of their pings outside the boundaries.

  After updating the plugins, the browser crashed

  nothing helped after turning on the origin, having fired a little more than the original.... I switched to the technique and everything again comes out of the frozen picture and only three buttons can help get out of the game.

  Have you tried setting the video to minimum?

  Thank you very much. everything worked to the maximum, everything goes under 11 direct, super. I think the problem is in the origin and in the pb. Thanks again.

  Congratulations to you, good luck.

  people, this is the same trouble as I have a gt 440 asus, change the wood to nvidia 296.10, completely upgrade the pb and you will be happy! good luck to everyone!

  tell me! When you exit the game, the picture begins to fluctuate irregularly for a few seconds, then the work table is written and the video card driver is written to the robot before the updates are completed successfully.

  Just recheck, price on x64

  I myself have to stand under x32 shvidshe for all this time.

  Is multiplayer possible with this config?

  PSU Chieftec 550W +80, Percent dual core E5500 2.8, mother ASRock G31M-VS2, video Asus GTS 450 GDDR5 1GB, RAM 4GB DDR2 (800 Hz), Hard Western Digital 500 GB. Operating system: Windows 7 Ultimate x64. Just write the truth, it’s just that my buddy has a computer and I want to give you a dashing Battlefield 3.

  It’s my fault, my computer is quite weak.

  What is similar to overclocking a video card from nvidia (9600gt)? What program is this and is it suitable for it?

  Hello, can you write a guide for Nvidia tray tools? I think I will be rich and useful.

  Nvidia tray tools there is no such program, for NVIDEA Riva Tuner http://radeon.ru/rivatuner/

  I have plans to buy a GeForce GTX 570, then I will conduct experiments and report the results.

  I'm paying for my food, but isn't there a guide for Riva Tuner anywhere? Otherwise I don’t even want to burn the card.

  If you just want to change the settings, then don’t fight, don’t burn.

  People can tell me why, since I only turn on dynamic shades in some games, then I immediately start to lag, can you tell me what the problem is?

  http://www.opencandy.com/. The Open Candy company provides retailers of cost-free software with a special plugin that can be installed in the installer of the cost-free software for advertising. software security Other virobniks. For a pittance in advertising, distributors of cost-free software promote their cost-free nature and modernization. Adware:Win32/Open Candy is an outdated version of the plugin from this company. All plugins from this company are identified by Microsoft's anti-virus tools as a low-level threat, which the company's representatives report. Further below the text, a bunch of furnishings and a song of the company, that plugins of this type are not spyguns and do not pose a threat to the koristuvach.

  GeForce 9600 gt. I say

  10 runs without lags, after which motor freezing starts for about 5 seconds, maybe the whole hour. There is no overheating. Please contact the computer for minimal benefits. I play on minimal settings. What's the problem?

  The video card may be hot, ver.

  Try in Origin select “Vikoristovati Origin u gri”

ATITool is a simple and powerful utility developed by ATI Techologies Inc (a leading video card manufacturer). The program provides direct adjustment of almost all video adapter parameters.

The program allows you to control the output of the video processor and its temperature conditions, the cooling system, and the voltage supply. Indeed, utilities can adapt absolutely all colors and characteristics to the monitor parameters.

Possibility

Main functions and technical capabilities of the programs:

• It controls and provides detailed information about the main parameters of the video adapter (fan speed, temperature, performance indicators, etc.).
• Search for popular 3-D programs to overclock your video card.
• The function is to apply tension.
• The ability to calm down the din.
• Setting up driver parameters for video adapters.
• Refrigeration system control function.
• Computer users can remove the fringe before overclocking the video card.
• Assessing the quality of 3-D graphics and comparing the results with the standard ones.
• Search for artifacts while overclocking the graphics processor. Once detected, the program automatically reduces the frequency.
• Possibility of scanning visual indicators of acceleration, vikory and values maximum memory kernels.
• Verification of overclocking results and provision of reports on the work and adapter mill.
• The function of pre-starting the operating system after an hour or startup.

Pros and cons

The security software enjoys great popularity, which is due to its low number of positive benefits:

• The utility independently evaluates the strength of 3D graphics. Once artifacts are detected, it automatically reduces frequencies. Therefore, without the participation of a professional, you can achieve the most efficient and safe overclocking for your video card.
• Extensive adjustment of the koristuvach.
• The presence of many of us and the presence of the Russian interface.
• Support for many Nvidia and AMD adapter models.
• Wide functionality.
• At correct vikoristanny Software security, you can use the capacity of the video adapter chip for 100 pixels.
• The program has an automatic mode for selecting the most optimal overclocking parameters.
• The program adapts the color and brightness of the image according to the settings of the skin monitor.
• Possibility of controlling temperature readings.
• Customers can cancel software security protection.
• You can set up a combination of hot keys for your account user profile.
• Reliable protection against overheating of the hardware warehouse.

Nedoliky:

• The maximum frequency selected by the utility is not always stable for the robot.
• Automation of software development is smart. You cannot completely trust the video card overclocking program. The koristuvach is guilty and must follow the work of the adapter himself. Otherwise, serious damage is possible.
• The safety of ATITool is complete.

entice

On our online resource you can easily download ATITool and a lot of other software without any costs.

It’s too early and late for every professional to arrive before there is a shortage of personnel. I immediately blame the power upgrade of the system, or rather replacement old video card I'll push harder.

Well, the financial warehouse needs to make adjustments, and the average gamer soon begins to think about growing the video card in the home in order to achieve the maximum that would be possible with the video card. Submitted to your respect universal utilities. They allow you to run video cards, either NVIDIA or ATI. The stench is the most popular among most merchants.

List of programs for overclocking video cards

RivaTuner

This program is a product of Russian distributors, but the Russian language is not included in the interface - only English. This program has a very wide range of capabilities due to customization NVIDIA video cards. It allows you to create your own patch scripts (scripts for replacing/changing machine code) and store them in the robot.

Varto note that this program is practically the same in its family, which allows koristuvachev to quit the finest adjustments video cards. This program has a number of glitches,

PowerStrip

This program is written directly into the system tray and does not interfere with the work of other programs. It also supports a multi-movie interface (in Russian).

The only downside of this program is its mental friendliness. It is expanding as a shareware program. This is unlikely to become a big problem for the Koristuvachs.

ATI Tray Tools

This program is very simple. Similar to the PowerStrip utility, it is also located in the tray. This program allows you to create a launch from the menu. It is possible to create hair profiles with special adjustments and adjust them to the point of need.

The ATITool utility was created specifically for low-level overclocking and monitoring of ATI video cards. There are two particularities. The first idea is that ATITool can test the stability of the entire video card. Friend - in automatic switching on Overclocking functions when switching from 2D to 3D mode, which allows you to further protect the energy consumed by the card, and stop overclocking only when absolutely necessary. This program does not allow you to tune the video card and serve only for overclocking.

In my opinion, the most beautiful utility for ATI є ATI Tray Tools

Let's see how it can be done quickly.

1. Install the ATI Tray Tools program.

2. Then we go to the window under the title “Correction of dispersal”.

If the temperature is pleasant, it will last

4. If your video card has different frequencies, you should select 3D frequency change.

6. Raises one of the frequencies by approximately 10 hundredths. Press the “Stop” button.

7. Next we press “Show 3D window”, and then - “Scan to Artifacts”. We check for approximately 10 minutes, during which time the artifacts are not to blame! If the doctor does not reach 10 lines and discards any artifacts, he needs to reduce the frequency a little and start the check again.

8. Once the verification has been carried out successfully, it is necessary to move the frequency within a range of approximately 5-10 MHz, after which the verification is carried out and the maximum possible frequency is found.

10. The video card is disabled. Let's launch the game as quickly as possible. It's been playing for about two years, during the entire hour there will be no artifacts, no matter what, otherwise the frequency will decrease.

11. If step 10 is successful, then go back to the overclocking menu, click on the “Save profile” button, save the profile under any name. Next, check the boxes “Enable after sleep mode” and “Enable profile together with ATT”.

13. Check that the ATI Tray Tools program autostarts. Anyhow, leave no trace.
That's all! Enjoy increased productivity from your card!

There are programs for overclocking any video cards, memory, which overclocking, in order to increase productivity, or change the specificity of your video card.