Go to the Samsung service menu. How to enter the service menu of the Samsung TV

As time passes, some TV settings change. This is due to the aging of parts, deterioration of the emission properties of a CRT, external factors, such as exposure to electromagnetic fields. Therefore, it is often necessary to carry out certain settings of the TV, even if it is in good condition. These settings include: restoring white balance, setting the brightness adjustment range, centering vertically and horizontally, adjusting the geometric dimensions of the raster, adjusting the color purity, adjusting the focus of the image, setting the AGC trigger threshold, etc. Before making the adjustments, decompression the kinescope. If it is necessary to replace electronic components, pay attention to the Dalincom online store, where microchips, transistors, varistors, relays, thermal switches, quartz resonators, etc. are provided in a wide range.

Each of the settings has its own characteristics. Consider from start to finish the process of their implementation for SAMSUNG 2039 TVs. It should be noted that the described settings are applicable to other SAMSUNG models made on the KS1A chassis with 14-, 20-, and 21-inch kinescopes.

The setup process begins with entering the service mode (Service Mode), which is sometimes called the Factory Mode. Logging in is also required when replacing the IC902 memory chip of the TV and CRT.

The entrance to the service mode is made from the remote control (RC). To do this, you must perform the following operations (by pressing the appropriate buttons and selecting a mode):

1. DISPLAY\u003e FACTORY.

2. STAND-BY\u003e DISPLAY\u003e MENU\u003e\u003e MUTE\u003e POWER ON.

The message “SERVICE (FACTORY)” will appear on the screen. The service mode has sections: ADJUST (Settings), OPTION (Options), RESET (Reset).

Access to the setup mode is provided by selecting the appropriate menu item by pressing the volume buttons VOLUME. At the same time, a list of settings is displayed on the screen, which are selected using the channel selection buttons (s, t). After selecting the desired setting, you can change it up or down with the volume buttons. To exit the service mode, press the “FACTORY” or “POWER OFF” button again. The choice of settings occurs in this order:

SCT\u003e SBT\u003e BLR\u003e BLB\u003e RG\u003e GG\u003e BG\u003e VSL \u003e\u003e VS\u003e VA\u003e HS\u003e SC\u003e SDL\u003e STT\u003e SSP\u003e PDL \u003e\u003e NDL\u003e PSR\u003e NSR\u003e AGC\u003e VOL\u003e LCO\u003e TXP.

The purpose of the settings, their ranges of change and default values ​​(factory settings) are listed in the table. Column "OSD" - the names of the settings displayed in the on-screen menu (On Screen Display).

In the service mode, you can change the values ​​of some parameters through the table of options selection (recommended values ​​of options are given in brackets):

Enable low noise amplifier - LNA (ON);

Selection of the signal receiving system - SYSTEM;

The audio path is AUDIO (MONO);

Select the output interface of the TV - JACK (RCA);

The choice of display mode on the screen ZOOM (NOR / ZOOM / 16: 9 - normal / increased / 16: 9);

Selecting the automatic power off mode - AUTO POWER (ON);

Filtering the second IF (sound) signal - 2 nd SIF (ON);

The inclusion of "hotel mode" - HOTEL MODE (OFF).

The SBL option should be off (OFF), and the BKS option should be turned on (ON).

Reset mode (RESET) allows you to automatically set all the default parameters. At the same time, the automatic modes are set to off (OFF), and the contents of the tuner settings are erased.

Consider the order of adjustment of some parameters.

1. Check the high voltage level.   First, check the supply voltage “B +”, which should be +125 V. Then connect the digital kilovoltmeter to the second anode of the kinescope, turn on the TV and set the brightness and contrast levels to minimum (achieve zero beam current). In this case, the high voltage should be 27.5 kV. After that, increase the brightness and contrast to the maximum. The level of high voltage should not change.

2. Adjust the focus of the image. A black and white signal is sent from the test signal generator and the focus control is used to obtain a clear image of the lines in the center of the screen.

3. Voltage regulation on the cathodes of a CRT.   It is necessary to connect the oscilloscope probe to the output of the GK panel of the kinescope. After that, the generator of the test signals give a gradation gray signal. By pressing the "P" button, the remote control sets the standard image size. The Screen VR variable resistor on the TVS sets the signal range to 120 ± 2.5 V (Fig. 1).

4. Adjust the purity of color.   before starting this operation, warm up the TV for 20 minutes. Loosen the screw securing the block of magnets (Fig. 2). From the output of the test signal generator, a white field signal is given. Using an external coil, the tube is fully demagnetized. Adjust the contrast and brightness to the maximum. Moving the magnets forward or back along the neck of the kinescope, they achieve the appearance of a vertical green band on the screen (Fig. 3). Carefully shift the block information. Slowly moving the block of magnets forward, achieve a uniform color of the vertical green strip and temporarily fix the block of magnets. Alternately, they include only blue and only red cannons; they check the purity of the color of the red and blue fields, respectively. Finally fix the block of magnets.

5. Adjustment information.   warm up the TV for 20 minutes. They give a signal of the net field. Rotating the rings of 4-pole magnets, one obtains the information of blue and red vertical lines in the center of the screen (Fig. 4). Adjusting the brightness and contrast to achieve the best image clarity. By changing the angle between the 4-pole magnets, they achieve the best convergence of the blue and red vertical lines in the center of the screen. Rotating simultaneously both rings of magnets and keeping the angle set between them, they combine blue and red horizontal lines in the center of the screen. 6-pole magnets are rotated in a similar way, achieving the combination of red-blue lines with green ones. It should be remembered that changing the angle between the magnets reduces vertical lines, and their simultaneous rotation is horizontal. If necessary, adjust the repeat.

6. Setting the threshold AGC.   For this, in service mode, the AGC value is set to 23.

7. Set the pre-chroma signals.   When performing this operation, the PSR and NSR values ​​must be set to 2 and 5, respectively.

8. Adjust the geometric dimensions of the raster. Produced in sequence: SC\u003e VS\u003e HS. On the TV signal test table. Set the value of the S-correction signal (SC – S-Correction) to 9 for 20-inch and 21-inch and 0 for 14-inch CRTs, and the value of the VA signal to 40. Change the VSL setting (vertical tilt) to set the size raster so that four divisions are visible below the circle (Fig. 5). After that, the VS parameter is adjusted (vertical shift) so that four divisions are visible above the circle (Fig. 6). Finally, by adjusting the HS parameter (horizontal size), the right and left borders of the image are set (Fig. 7).

Any TV, including those that do not belong to Smart TV devices, have service menuwhich controls vital settings. In particular, the image size horizontally and vertically, brightness correction, and other parameters that can seriously affect the operation of the device. Therefore, if you do not understand how and what to do, it is better to leave this service altogether.

It is not surprising that the service menu on Samsung TV is called extended, because it is used if you need to make major changes in the operation of the TV itself. And to use it, you need to have a special remote control. And it is important that he was "native" for the TV, that is, he went with him in the kit. Otherwise, even if you get into the menu, it will be difficult to be there, because the control is not reliable.

What are the features of the Samsung TV service menu

As already mentioned, the average user is not recommended to experiment with the service menu on Smart TV, including the Samsung K series or any other series, even J. The point is not that this is a whim of developers. On the contrary, users can press the wrong key on the remote, and all settings will fail, which will lead to the complete loss of the normal operation of expensive equipment.

But in the hands of the master, who has entered the service menu of TVs, it can turn the standard Smart TV into almost a home theater. However, sometimes these settings can be opened completely by accident, by involuntarily pressing some key combination. If this happens, you can change:

1. The spectrum of the image, for example, by selecting a green palette or red, in connection with which, the picture on the screen will become a country. Watch TV in this format, few people want.
2. Image size options on the screen. It may happen that the picture will not occupy the entire screen, but only half of it, and from the bottom, top or side. The picture can be broken into pixels, and tolerate other, unpleasant changes.
3. Naturally, the service menu samsung tv   can change the sound parameters, making it so that even at the highest volume, the device will be barely audible. Or it uses various sound effects, because of which an echo may appear, the acoustics will increase, which also does not contribute to comfortable viewing of the content.
4. In addition, once in the Samsung TV service menu, you can enable and disable various built-in functions.

In general, if the user needs to change any automatic settings, this is done right here.

How to get to the Samsung 6 TV service menu

In order to go to the service menu, you need to perform a few simple manipulations. But they are available only if there is a remote control. For some models, the standard remote is suitable, as for Samsung 5, or you will have to use a special remote control, which is not included, and you will need to buy it separately. But this is not a problem, because there are a lot of service shops.

• Take the remote and press the following sequence: info - menu - mute - power;
• After learning how to enter the service, you need to wait a couple of seconds, because the TV will reboot after pressing the specified combination to display the necessary information;
• After that, the incoming person must learn to move in such a way that they do not accidentally change the settings. If you need to change something, you must click on "Enter" and only then introduce amendments;
• Go to “Control”, “Cloning” and so on;

It is important, before finishing the work in the “Hotel Option” section, to put the “OFF” mark to protect certain functions from failures. And also, since the user has entered the menu, and knows how to enter here at any time, you still need to understand how to exit and not damage the settings. It is done this way:

• You can exit by simply turning off the TV;
• Then again we go MENU-SYSTEM, and see what has changed;
• If everything is good, we entered without any problems and arrange the settings, which means that you can continue to use the TV with an updated menu.

Hello dear readers! In this article we will talk about the holy of holies -.

Although it is more accurate to say here in the plural, since several model series of different years will be considered.

Perhaps you have a question: "Why should I, a simple user, climb into the service menu? After all, it is very dangerous, you can even completely kill the TV."

And here it is difficult to disagree. After all, really, without extreme necessity, it’s absolutely not worth it to just “rummage” in the settings of the engineering menu. If there is no idea of ​​breaking the firewood there, then the service center may then not be taken.

From the above, the conclusion suggests itself: so why climb there and is it really that dangerous? Well, he asked himself, and I will answer.

So, why do we climb into the service menu of the Samsung TV:

1. If you bought a TV abroad (for example, in Poland) and there is no Russian language in it.
2. If your TV has Russian language, but Smart TV is blocked, or Russian-speaking widgets are not available for installation.

That is, in the settings of the service menu, we will search for the Russian language (in its absence) and remove the Smart Hub block.

Now about the danger: if you do everything exactly according to the instructions from the article, everything will be fine. You will happily use your zomboyaschik. 🙂

As you already understood, the article will be mega-useful for people who brought their television sets from abroad. They often face similar problems.

If you bought your "Samtsa" from an official representative in your city, these problems should not threaten you. The seller has already made all the necessary settings.

After reading the article, you will learn:

So you bought a TV Samsung smart   TV somewhere abroad (usually in Poland), revered about and now want to enjoy all the delights of "smart" technology.

No problem, let's get started.

Turn on your TV and press " Smart hub":

At this step, you can have two paths of development.

The first. When you first start, you may receive a message like this:

Software products (including Samsung Smart Hub) are specifically designed for users.

Smart Smart o Smart ge Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung Samsung

This means that you have blocked Smart TV functions for your region. That is, according to the manufacturer, your TV should not have been in the country where it is actually located.

If you have such a situation, then do not panic. Everything is quite simply solved - in the course of the article, everything is told and shown.

In the event that you did not receive such a message, and the full menu of the Smart Hub was opened, go directly to our writing. There is still much easier. 🙂

So, when issuing a tv message specified above, the first thing to do is to check the presence of the Russian language in the TV settings menu.

Check on the example of the Samsung UE40ES6100 (E-series 2012). Click the "Menu" button on the remote control:

Then follow the path "System - Language":

Now look for the Russian language in the list:

If he did show up (if Smart TV is locked), then the seller did not quite correctly set the necessary settings in the engineering menu for your actual region of residence. From here we conclude:

1. If your Smart Hub is blocked, you need to change the region of the TV itself, using the CM settings.
2. If everything works and there is Russian, the CM parameters set are not recommended to be changed at all.

Well, if there is no language, then you need to unlock the Smart Hub and change the region of the TV set to yours in order to Russify it. And this is done, as mentioned above, only by changing the parameters of the engineering menu.

There are a few simple wayshow this can be done. But depending on the assembly of your TV and the features of the firmware, the same method may or may not work on the same TV model.

That is why the author leads several ways. Use them in the order given in the article - from the most simple to more complex. That is, tried the first method, it did not work on your TV, try the second one and so on.

But before you start exploring the service menu of the Samsung TV, carefully read the following instructions:

1. All operations in the TV service menu, you do at your own peril and risk. Remember that any deviation from the instructions, or an erroneous act of negligence, can kill your TV.
2. If you are not confident in your abilities, or do not quite understand what is at stake, it is better not to try. The consequences can make you sad.
3. If you still decide for yourself, then set the parameters in the service menu strictly according to the instructions and take pictures of the original settings.
4. In case you did everything according to the instructions, but nothing happened, read the comments on the article. Perhaps there, there will be a solution suitable for your TV.

If you have difficulties with the definition of the series and year of release of your TV, carefully read the article about. For a general idea of ​​working in SM, watch the video below carefully:

TV service menu Samsung C-D-E-F   series   (unlock)

In order to unlock the Smart Hub and add Russian language in the TV menu of models 2010-2012. ( C-D-E Series) do the following.

Consider the example of the service menu of the TV Samsung UE40ES6100.

  Method number 1:   using the TV remote control.

With the TV off, press on the remote control the sequential combination of the "Info - Menu - Mute - Power" buttons:

The TV turns on and the service menu opens.

To exit the engineering menu, click the "Power" button, turn off the TV:

Now turn on the TV again, press "Menu" on the remote and go along the path "System - Language":

  Now select the Russian language from the list:

Follow the path Control - Sub option "and set the parameters" RS-232 Jack-Debug "and" Watchdog - Off ":

This will enable the service port and the error timer, which will automatically restart the system in case of critical indicators.

But sometimes it happens that the "Local Set" parameter in the Samsung TV service menu is inactive and cannot be changed. The factory closes this feature in the firmware.

Well, try the following method.

  Method number 2:   using the software console ruSamsungTVCommunicator.

This method works on many models of 2011-2013. (D-E-F series).

This program allows you to fully manage your TV from a computer. Also allows you to access the advanced service menu. So, download the above application on your computer.

Naturally, the computer and the TV set should be on the same network and see each other. How to do it right, we said in.

Turn on the TV and use the "Source" button on the remote control to switch it to "TV" mode:

Go back to the computer. Disable antivirus (firewall) in order to not block the program when it detects a TV.

Now unpack the downloaded archive with the program and launch it by clicking on the file "ruSamsungTVCommunicator.exe":

The application starts and displays several information windows in German. Everywhere agree, click "OK".

Then the program icon will appear in the system tray and will scan the TV for several minutes:

Wait until the end of the output of such a message and click "Weiter":

Now in the folder with the program files the file "ruSamsungTVCommunicator.ini" will be created with the settings for connecting to your TV:

Knowing this data initially, you can enter it in order to avoid a long scan when you first start the program.

Now go to the TV. You will be prompted to add a new device on the screen. Click "Allow":

At this time, a virtual console will open on the computer. Click on it the "Info - Factory" button sequence:

Try to press quickly. If the service menu on the TV does not appear, repeat the combination several times.

After the menu has opened, select the “up-down” arrows (only with them, the “left-right” buttons change parameters) with the “Option” buttons and press the “OK” button (center key):

In the "Local Set", instead of the value "EU" set the parameter "CIS_RUSSIA":

Now press the "Return" button on the TV remote control to go back one step and reset the system settings by clicking "Factory Reset", then "OK".

At this step, the TV will reboot, then re-enter the service menu.

In order to add the Russian language in the TV menu, go through the items "Control - Sub option" and specify the settings " Region - PANEURO "and" Language Arabic - CIS ":

As you can see, in our case, when connected with a software remote control, the second item is not available (just missing from the menu).

Now we leave from the service menu of the TV. Press the "Factory" button on the virtual remote control twice:

Follow the path " Control - Sub option "and specify the parameters" RS-232 Jack-Debug "and" Watchdog - Off ":

If this way of entering the service menu of your Samsung TV, the "Local Set" parameter is inactive and cannot be changed (close the option at the factory), then proceed to the next method.

  Method number 3:   with the help of infrared diodes and the old cord from the headphones.

This method is the most reliable. It calls the extended service menu of Samsung TVs models 2010-2013. (C-D-E-F series).

The bottom line is this. We take one LED (it is possible from the old unnecessary panel) and connect its cathode to the right or left channel of the plug from the headphones (the usual 3.5 mm mini-jack.). We connect the anode of the LED connect with the mass of the plug.

At this installation work is completed. See how it looks schematically:

  In fact, everything went without even a soldering iron. The author of the article took the "mini-jack-mini-jack" cord and simply attached the diode legs to the plug on one end.

Looks like this:

Temporary solution without a soldering iron:

Of course, you can also solder for convenience, but it’s not difficult to hold for two seconds. And yet, I apologize wildly, but in the photo the anode is mistakenly pressed to the sound channel too. The mass is on the opposite side, under the thumb. 😉

As a cord, you can use a lot of options: just a headphone plug with a piece of wire, a mini-jack cord of 3.5 mm. - tulips, etc.

Is there some more   second method   manufacturing this device.

This time we take two LEDs and connect them in parallel according to the scheme: the cathode of the first - to the anode of the second, the anode of the first - to the cathode of the second.

Then we solder the whole thing to the sound channels of the headphone plug. In the diagram, the construction looks like this:

Of course, in this version you can not do without a soldering iron.

By the way, if there are no diodes at hand, you can try the version with a factory infrared blaster that goes to some Samsung models:

The performance of this design is easy to verify. Insert one end of the cord into the audio output of the computer or laptop, attach the LED to the other according to the diagram.

Now any audio file, make full volume and aim the camera on mobile phone   on the diode - it should glow.

Connect to your computer (laptop) our simple design. Turn off all equalizers in the sound card settings and set the maximum volume level:

AT windows player   Media Player also set the sound to maximum, remove all equalizers and turn off replays:

Now we carry the whole thing to the TV. Turn it on and switch the button "Source" to the mode "TV":

Point the LED at the TV receiver (the place where the remote control pokes). The distance should be 10-15 cm:

Run the file "INFO_FACTORY_inv.wav" from the downloaded archive in Windows Media Player. After that, the TV turns on and the service menu opens.

Select the up and down arrows (only them. The left and right buttons change the parameters) the item "Option" and press the "OK" button (central button):

In the item "Local Set" instead of the value "EU" set the parameter "CIS_RUSSIA".

After that, press the "Return" button on the TV remote control to go back one step and reset the system settings by clicking "Factory Reset", then "OK":

Now the TV should reboot itself. If not, turn off the "Power" button, and then go back to the service menu.

Walk the path Control - Sub option "and specify the settings for" RS-232 Jack-Debug "and" Watchdog - Off ":

This will enable the service port and the error timer, which automatically restarts the system in case of critical indicators.

That's it, the Russian language will be available in the TV menu and the Smart Hub will be unlocked.

  Method number 4: alternative option using an infrared blaster from the TV set. Quite often it works.

1. In the first step, when the TV is off, press the "Info - Menu - Mute - Power" button on the remote control. The service menu opens.

2. Now play the file "FACTORY + 3SPEED_inv.wav" from the previously downloaded archive of service codes. At the same time, the TV screen should blink. If this does not happen, repeat playback until you notice a blink. Then turn off the TV with the "Power" button on the remote control.

3. Now press the "Info - Menu - Mute - Power" button combination again to bring up the engineering menu. But now in the menu "Option" should be available for editing the item "Local Set", which we so need. 🙂

1. If the first time you did not succeed ("Local Set" did not appear), repeat the whole process again. Sometimes for some reason, does not work the first time.

2. If while playing the file "FACTORY + 3SPEED_inv.wav" the TV has switched to the test mode (the screen will start blinking alternately in different colors), do not be alarmed. Just push up the joystick on the back of the TV and everything will pass.

3. If, when using a blaster, the TV does not react at all to the codes, then there is not enough power of the built-in sound card of your computer. Alternatively, connect it through acoustics with a built-in amplifier.

  (unlock)

This manual is relevant for TV models in 2014.

So, to enter the TV service menu Samsung H-series, you need to use a homemade remote on two diodes, or an infrared blaster from the TV set.

How to make such a remote control is very detailed in the topic of changing the region on TVs E and F series (spoiler above). There is also a link to download the archive with sound service files that you will need in the future.

By the way, it is the "self-made" LED remote control that is given preference in this way of entering engineering menu, because the blaster on some TVs does not work.

If you have a tablet or smartphone on android at home, the software for these devices can serve as a good way out.

Step # 1. With the TV off, press on the remote control the sequential combination of the "Info - Menu - Mute - Power" buttons:

The service menu will open, but not extended. It will not be available items required for the Russification of the telly. And now a very important message:

Before changing anything in the CM, immediately take a photo of the initial settings of the "Option" and "MRT Option" sections.

Step 2. Being already in the service menu, hover the diodes (or blaster) on the TV receiver and run two files from the archive in the Windows Media Player: "INFO_FACTORY inv.wav" and "FACTORY FROM REMOTЕ":

Reproduction should be cyclical, without pauses. As a result of these actions, the service menu should be expanded. That is, the item "Local Set" is activated and the necessary lines in the "MRT Option".

If, after playing the above sound codes, the advanced engineering menu still does not open, try the following alternatives:

1. Play in TV mode (Source-TV button) a couple of INFO.wav + FACTORY.wav files.
2. In the "TV" mode, press the "INFO" button on the remote and immediately play the file "FACTORY_from_REMOTE_inv.wav"
3. The third option is alternative way   input using the factory IR blaster from the TV set (method number 4 under the spoiler above).

In practice, quite often, even for TVs of the same series and the country of production, they are perfectly suited different ways. Therefore, everything here is solved only by experience. And if one does not fit, go to the next.

Step number 3. Use the up and down arrows (only them. The left and right buttons change the values ​​of the strings) select the "Option" option and press "OK" (center button):

Now in the "Local Set" you need to specify the value, depending on the region of destination of your TV, namely:

1. If the Smart Hub starts up for you, skip the "Local Set" item altogether. In this case, its value is not recommended to change.
2. For TV from Asia and Europe (series for Poland and Finland), with a blocked Smart Hub, specify the parameter "EA_CIS" (CIS_RUS).
3. On TVs for other regions, do not use the above values ​​yourself. There may be problems.

With this option, you indicated the TV profile settings digital tuner   for a specific region and added the ability to install the Russian-language package. The prefix "SIS" means the CIS countries.

Now exit the "Option" item with the "Return" button on the remote and enter the "MRT Option" menu. In it, set the following settings:

On the HU series of TVs, the Region and Language_Arabic items are not available for editing. If you have such a situation, then skip them and continue to do everything exactly as indicated later in the article.

At this step, be sure to go to the second stage of the settings and do everything according to the instruction “Setting the digital channels”.

  Service menu of Samsung H-series TVs   (setting digital channels)

After changing the TV region (Local Set) and adding the ability to select the Russian language, be sure to check the settings of the digital channels.

To do this, go to the service menu on the path "Option - MRT Option" and check the following parameters:

For the HU series, it is imperative to compare all the available items in the “MRT Option” section with the original values ​​in the photo and set them again if they change.

For a more complete understanding of the subject matter and the algorithm of actions, look at the example of successful setting up the Samsung UE55HU8500LXXH TV, one of the forum users samez.eu:

After that, press the "Return" button and return to the first page of the service menu and select the "Option" item:

Now press "Factory Reset" and "OK" (the central button of the remote control):

At this point, the TV should automatically reboot. If not, turn it off with the "Power" button on the remote, and then re-enter the service menu.

Follow the path "Control - Sub option" and specify the settings "RS-232 Jack-Debug" and "Watchdog - Off":

This will enable the service port and the error timer, which automatically restarts the system in case of critical indicators.

On this Samsung TV service menu is defeated! The Russian language will become available to you and the Smart Hub will be unlocked. The dialogue will begin initial setup. For Polish TV, in the window select the Smart Hub region, select "Other".

If as a result of the above settings, the remote control has stopped working Smart touch control, hold down the "Return" and "Guide" buttons for some simultaneously:

After that, the TV will perform the detection again and everything will work again.

  Second way. When you first turn on the TV there is Russian, and when you press the "Smart Hub" button, the Smart TV menu starts. It is very good:

Now look carefully at the screenshot above. See, Russian-language widgets are already installed here, such as Megogo, Tvigle   other.

This means that in this case, Smart TV is unlocked. And if you carefully read, remember that all applications are geo-dependent and are installed, depending on the specified region in the settings.

If you also already have widgets installed in Russian and are full in the store Samsung appsit means you can not read further.

But quite often there is a situation when the Russian menu is already on the TV you bought in the online store, and the Russian-language Smart TV applications are not available for installation.

The reason is in the wrong region. To test this setting, select the desired link, depending on the model of your TV.

  (for E-series)

While in the "Smart Hub" menu, press the key combination on the TV remote control in sequence:

Rewind \u003e\u003e | 2-8-9 rewind |<<

After that a list will open with a choice of countries. Choose "Russia" or yours:

Then click "OK."

At this stage, the settings for changing the region of Smart TV are running out!

Changing the region of Samsung Smart Hub. Add Russian Widgets   (for the F-series)

Press the "Source" button on the remote control of your TV and select "TV":

Then follow the path "Smart Features":

After the reset is complete, click "OK":

Now, without leaving the menu   above, click "Open Smart Hub":

Go to the "Smart Hub" accounts:

Press the big button and moving on the menu, go to the page "Terms and Privacy Policy for Smart Hub". Put two checkboxes:

Now, after you have set the second checkbox, press one of the following button combinations on the TV remote control:

Rewind \u003e\u003e | 2-8-9 rewind |<< Mute / Return / Vol+ / P^ / Mute

This will open a menu with a choice of countries. Choose "Russia", or your:

After that, go back to the "Terms and Privacy Policy for Smart Hub" page.

Again, put two daws for consent and click "Next":

That's all! Work on setting up Smart TV is complete.

At the time of this writing, only such could "dig up" on the network, on one of the popular forums. I will give a link to it below.

P.S. And at home, parents have a F-series TV set, but I still can’t get to them. 🙂

Changing the region of Samsung Smart Hub. Add Russian Widgets   (for the H-series)

The method of changing the region for the H-series in 2014 is completely identical with the 2013 models of the F-series. Only changed the appearance of the menu.

Therefore, the instructions are given with screenshots on the example of the F-series and let you not be frightened by minor differences in the design of the menu.

Press the "Source" button on the remote control of your TV and select "TV":

Then follow the path "Smart Features":

  In the menu that opens, select "Reset Smart Hub":

  Enter the security PIN (default is 0000):

  Start the reset process. Wait for it to finish:

After the reset is complete, click "OK":

Now, without leaving the menu specified above, click "Open Smart Hub":

Then go to "Smart Hub Accounts":

Press the big button and moving on the menu, go to the page "Terms and Privacy Policy for Smart Hub". Check the box for consent:

Now, after you set the checkbox, press one of the following button combinations on the TV remote control:

Rewind \u003e\u003e | 2-8-9 rewind |<< Mute / Return / Vol+ / P^ / Mute

A menu appears with a selection of countries. Choose "Russia", or your:

At this step, all settings end!

After you have activated the instructions for changing the Samsung Smart TV region, mandatory widgets will automatically be installed.

Also, apps available for your region will appear in the Samsung Apps store. You can choose and install.

That's all in principle. So tuning samsung TV service menu, you can say, saw your pet from the inside. 🙂

By the way, want to learn more about your telly? Then welcome to the samez.eu forum. The author of the article also got a lot of things from there.

Well, now everything is set up! As you can see, everything turned out to be quite simple. It remains to wish you a pleasant viewing!

And finally, watch the video as a reminder that you need to work very carefully in the service menu, otherwise the consequences may be of the type.

P.S.The latest and relevant information on TVs in 2015 (J-series) is located. Please read who should be.

Instruction

Log into the service menu tv   Samsung. If you have SCV11A, TVP3350, TVP5350 or TVP5050 models, then on the remote control, press the StandBy buttons - P.Std - Menu - Sleep - Power On. After that, the screen will appear menu   Adjustment. This means that you managed to enter the service menu tv. If you have the CK5038 ZRTBWCX model on the SCT11B chassis, press the following sequence of commands: STAND-BY - P.STD - HELP - SLEEP - POWER ON.

For the CS7272 PTRBWX model on the SCT 51A chassis, press the PICTURE OFF –SLEEP – P.STD –– MUTE – PICTURE ON buttons successively. If your model tv   CS 2139TR, CS-25M6HNQ, CS21A0QWT, CS-21D9, CK-564BVR, CS-21S4WR, CZ-21H12T, or CS-21S1S, then click the hidden button, and then very quickly the following sequence: Stand-By - Pstd - Help - Sleep - Power on. For models made on the KS1A: STAND-BY chassis, then press DISPLAY, then MENU - MUTE - POWER ON.

Enter menu tv   Sony KV-C2171KR, KV-X2901K, KV-X2501K, KV-X2581KR, KV-M2540K, KV-X2581K, KV-M2541K, KV-X2981K, KV-X2101K or KV-X2981KR models can be used by pressing the buttons on the display screen , 5, VOL +, TV, in the upper right corner of the screen tv   should appear the inscription TT. If you have KV-M2101, KV-M2170, KV-M2171 or KV-M1440 models, put your TV in standby mode, then press the following sequence of buttons on the remote control: ON SCREEN DISPLAY - 5 - VOLUME + - TV.

Enter menu TVs TELEFUNKEN, THOMSON, BRANDT, FERGUSON, SABA, NORDMENDE, working on the processor ST92T93J9B1 or ST9093, you can use the following method. Using the remote control, switch the TV to standby mode, turn it off using the mud switch.

Then press the blue button labeled VT, turn on the power switch. Next, click again on the VT button. As a result, a table will appear on the screen with the words Setup, Video, Geom. This is a service menu. To exit this mode, click the STAND-BY button.

Search for a shortcut key to enter the service menu tv   on the site http://master-tv.com/article/servise/. At the top of the window, click the first letter of the name of your TV, then select from the list the manufacturer and the specific model.

Service menu tv   serves for additional settings of the data receiving parameter and the transmitted image. To activate it, there are several combinations that are suitable for different models.

You will need

• Remote control.

Instruction

Pay attention to the release time of your TV model. It is possible that if the model was released relatively recently, there are several other codes for it. This is due to the fact that this menu is constantly being finalized, and as Samsung releases new TVs, they install a certain program that is launched using various combinations on the remote.

Take the remote, quickly and sequentially press the following buttons: MUTE-1-8-2-POWER ON. Please note that it is best to prevent a break between pressing the buttons for more than 1 second, since the combination can simply be reset. If you press the wrong button, wait a few seconds and start again.

If pressing the above buttons successively did not produce any results, use another code to enter the Samsung TV service menu. This may be a combination of info-menu-mute-power, which is most typical for devices already outdated TV models.