The antivirus is responsible for allowing the installation of Adobe software. Implementation of anti-virus software. Implicit rules that need to be remembered
Before you access any programs from the Internet, in order to access programs correctly, you may be required to disable your installed anti-virus software. from viruses. Since this product must be removed, first of all, it is necessary to remove such information in order to enable the anti-virus protection in order to install the security program correctly. Once you have acquired the program, you will need to make a number of speeches to ensure that your computer is protected from theft.
Instructions
1.Open the installed anti-virus program from the taskbar. Right-click on the icon. Several anti-virus programs will appear at you, so you can open the security program to uninstall it.
2.Select “Zupinity zakhist”. If you want to protect your skin from antivirus protection, you can use the same protection, but you can also use the formula that means “Zupinity protection”. After the knot, turn it over until it rolls over.
3. At the bottom left corner, click on the “Start” button, then click on “Control Panel”, and then click on the “Security Center” button.
4. Take a look at your “Security Center.” You will show that your protection against viruses has been achieved. If you need to turn on the firewall, you can do this by clicking “Windows Firewall” at the bottom of the page. This will open a new window, allowing you to select “Off” to turn on the firewall.
5.Finish the installation and turn on the anti-virus protection by clicking on the icon on the desktop or selecting the “Start” button, then “Programs” and click on the anti-virus program to protect the computer.
6. Turn down the firewall at the security center. Check for viruses and protect against spyware to ensure that your computer is protected from spyware and viruses.
- After accessing the Internet or from a disk, always check the presence of viruses and malware, as they tell you during installation, turn on your anti-virus protection and/or firewall.
The task sequence duration allows you to specify the Configuration Manager 2007 package and program that you want to install as part of the task sequence. Installation of the program package will proceed without delay, without completing the policy testing interval.
Date of order sequence Install the security software It will only be saved in the standard operating system and will not be saved as part of a Windows reinstallation (WinPE).
You can adjust these parameters.
I'mIndicates briefly what is indicated by the name, which describes the action that is indicated on whose account. Description
Allows you to enter reports about the activity that ends up on this page. Installation of one program
Adjusts the sequence of tasks for installing one program. At this point the installation of the program is complete. To select the Configuration Manager 2007 package you want to install, click the button Look around. If Configuration Manager 2007 R2 is installed, you can select the Configuration Manager 2007 R2 Application Virtualization package when selecting a package. To select a program that needs to be logged in to install the package, use the shortcut list.
The selected program must meet the current criteria.
- Vaughn cannot independently initiate re-engagement. The program must perform re-enablement using the standard re-enable code - exit code 3010. This ensures successful re-enable processing in this sequence. As soon as the program returns the exit code to 3010, the internal sequence logging mechanism is ordered to be re-enabled. After restarting the order, the task sequence will be continued automatically.
- Only after the entrance of the koristuvach
- Vikonannya with the rights of a koristuvach
Select this option to configure the sequential installation of several programs within the same sequence of tasks. On which the name of the base change is indicated in the row of change sequences of the order, each of which will place a pair of values<package identifier: I have programs>, separated by a double border. A number of variable names are formed by adding a numerical suffix from 001 to 999 to the specified base name. Variable names and associated values create a dynamic list of packages. The list of packages will end if the names of the packages with the accompanying numeric suffix are no longer available. The bundled packages will be installed in the order they appear in the list. Before installing the skin pad, the installation of the front one is completed. The packet identifier will always be indicated by great writers. In the name of the program, the register is ensured, so you can definitely avoid the names assigned to the program when created. If the change value is not in the correct format or indicates an invalid package identifier or program name, the package installation will not be installed. If changes are made to the base names and the suffix "001" on a daily basis, the packages are not installed and the process completes successfully. The selected program must meet the current criteria.
- You must launch under the name of the local system cloud account, and not under the name of the client cloud account.
- She can interact with her desk. The program must run without notification or automatically.
Set this order so that if the installation of programs in the list fails, the sequence of the task will be entered Install the security software was continued. Since this order is not established, then if there is a failure under the hour of establishment, the task of the sequence will be completely completed. Once the order has been installed, the next package or program from the list of changes will be installed, regardless of the concessions.
The following steps will help you create additional rules. To illustrate the principles that underlie skin behavior, please consider applying the rules for Office XP.
Procedure 1. Reorganize all programs that need to be completed.
Check your security software if you want to identify it. Our Office XP application includes Microsoft Word, Excel, PowerPoint® and Outlook®.
Lesson 2. Determine the type of rule
Return to Table 1 ( In any type of illness, vikorystuvati skin rule), in order to determine what type of rule you want to use, and also to be considered for the safety of the producers for your rule. In our case, we will vikoristovat the rules for the way of life with equal security for the residents.
Procedure 3. Write down the folders in which the security program is installed
Reorganize all the folders where the security program is installed. You can earn money in different ways:
For our example, consider the following neglected tasks:
| "C:\Program Files\Microsoft Office\Office10\WINWORD.EXE" | |
| "C:\Program Files\Microsoft Office\Office10\EXCEL.EXE" | |
| "C:\Program Files\Microsoft Office\Office10\POWERPNT.EXE" | |
| "C:\Program Files\Microsoft Office\Office10\OUTLOOK.EXE" |
Lesson 4. Select the stored programs
Each program can launch additional programs for additional tasks. Your program may be located in one or several additional programs. For example, Microsoft Word runs the Microsoft Clip Organizer program for organizing clipart objects. Microsoft Clip Organizer supports the following programs:
| C:\Program Files\Microsoft Office\Office10\MSTORDB.EXE | |
| C:\Program Files\Microsoft Office\Office10\MSTORE.EXE |
Microsoft Office also downloads files from the C:\Pogram Files\Common Files folder.
Croc 5. Clear the rules
Then group the rules you are tied together to create a secret rule. Consider the possibility of changing the middle ground, wildcards and rules for the way to the register.
If you look at our case, it’s important that all programs are saved in the folder C:\Program Files\Microsoft Office\Office10, so it’s enough to create one rule for the whole folder, instead of several other rules for each program. In addition, if on Microsoft Office computers, before installing into the Program Files folder, make sure to replace the obvious option. In this manner, our rules will look like this:
While some of these programs are allowed to change, we will not have to change our rules.
Implicit rules that need to be remembered
When rules are in place, such aspects should be taken into account when designing policies.
Scripts input
Login scripts are saved on a central server. Often these servers can change depending on the hour a client logs into the system. Yakshcho Vikoristovuet rule for umovchannyam Disallowed, check to see what rules you have created that determine the location of script files in the input. Consider the possibility of using wildcards to designate these positions, as entry servers post similar names.
File protection service
The file protection service stores archived copies of many system programs in a folder called dllcache. These programs can be launched by a computer operator who knows the first way to the archived copy. If you don’t want to allow hackers to run programs that are in the archive folder, you can create the following rule: %WINDIR%\system32\dllcache, Disallowed.
External file retouching
Windows has a lot of options for sending messages to programs that automatically quit at the right time. If you forget to enable these programs, the accountants will receive notifications about the cancellations when you log in to the system.
External retrieval of autodata files include:
| %USERPROFILE%\Start Menu\Programs\Startup | |
| %ALLUSERSPROFILE%\Start Menu\Programs\Startup | |
| Win.ini, System.ini lines beginning with "run=" and "load=" | |
| HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run | |
| HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce | |
| HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run |
Antivirus programs
Most anti-virus packages run a scanner program that works in real time and starts when the user logs into the system. This program scans all files that are opened by the user, checking them for possible infection with a virus. Check to see if your rules allow you to install antivirus programs.
Scenarios
This section deals with broader problems and ways to solve them for additional policies of localized programs.
Blocking bad scripts
The organization will require protection against viruses, such as scripts. The LoveLetter virus, which falls into the category of hemlock worms, has been estimated to cost between 6 and 10 billion dollars. This plant, which has over 80 species, continues to diversify frequently.
The LoveLetter worm, written in Visual Basic Script (VBS), is written as the file LOVE-LETTER-FOR-YOU.TXT.VBS. The policy of the localized wiki program blocks this program, simply protecting the wiki of any .vbs files.
However, it is a good idea to organize .vbs files for scripting scripts in the input and system. Blocking all .vbs files protects the organization and prevents Visual Basic scripts from being used for necessary purposes. The Windows Adjacent Program Policy allows for the exclusion of certain VBS scripts and allows for the exclusion of valid ones.
This policy can be created by following the rules given in Table 4.
| Table 4 – Rules for blocking bad scenarios | |
| Rules for the way | |
| *.VBS | Disallowed |
| *.VBE | Disallowed |
| *.JS | Disallowed |
| *.JSE | Disallowed |
| *.WSF | Disallowed |
| *.WSH | Disallowed |
| Rules for certificates | |
| IT Department Certificate | Unrestricted |
This policy ensures that all Windows Script Server (WSH) files are deleted, except for scripts that provide a digital signature to the IT department. Information about how to revoke a certificate and place digital signatures on files can be found in Addendum.
Managing software installations
You can configure your organization's computers in such a way as to allow the installation of unproven software. For software that uses the Windows Installer technology, which can be accessed through the policies described in Table 5.
| Table 5 - Rules for installing programs | |
| For washing, the level of safety: Unrestricted | |
| Rules for the way | |
| *.MSI | Disallowed |
| \\products\install\PROPLUS.MSI | Unrestricted |
| Rules for certificates | |
| IT Department Certificate | Unrestricted |
This policy prevents the installation of all Windows Installer packages. The policy allows the installation of only packages that provide a digital signature to the IT department and the OWC10.MSI package, which can be downloaded from \products\install. Information about how to revoke a certificate and place digital signatures on files can be found in Addendum.
This policy also demonstrates a way to prioritize the rules for the rules for the certificate, in addition to allowing the launch of unnecessary software. To create rules for any other packages in which your organization cannot or does not want to put a digital signature, you can create rules for a hash or rules for a new way.
Business PC
In some cases, the administrator may need to uninstall all software on the computer. This may be due to the following reasons: because users do not have enough rights to replace system files or files in large folders (such as Program Files), and they are not allowed to write files to any place on the disk, they can copy there program and run її.
Viruses that have entered a computer in this way can damage the system by changing files and operating system parameters; They can also make great profits, vikoryists, and not for the sake of the privileges of the koristuvachs. For example, bankers can achieve mass distribution of electronic mail, denying access to the account book of the client. Current systems are designed to protect against this type of attack.
Dock users are not logged into the administrators group on their local computers; the policy, described in Table 6, protects them from malicious code. PC fragments cannot be replaced in the Program Files or Windows folders; they can only be deleted from programs installed by the administrator.
This policy protects the Windows installation of all programs installed on the user’s computer, except for programs located in the Windows and Program Files folders and their subfolders. The policy is not finalized to administrators.
When the user retrieves the attachment in the email notification (for example, WORM.vbs), the email program will copy it to the profile folder (%USERPROFILE%) and try to launch the attachment. Since the profile folder is not a subfolder of the Windows or Program Files folder, programs that are launched will not be deleted.
Problems are encountered if programs required by the computer are installed not only in the %WINDIR% or %PROGRAMFILES% folders, but in these folders there are programs that the administrator wants to prevent from running the computer. In such situations, the administrator may develop additional charges, as shown in Table 7.
| Table 7 - Blames for computer software | |
| Rules for the way | |
| %WINDIR%\regedit.exe | Disallowed |
| %WINDIR%\system32\cmd.exe | Disallowed |
| \\CORP_DC_??\scripts | Unrestricted |
| %HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\InoculateIT\6.0\Path\HOME% | Unrestricted |
Having made these mistakes, we reject the upcoming result:
Various policies for various investors
In this scenario, there are computers on which a lot of self-employed people work. All computers have the same security software installed, but the administrator wants to give access to some of the programs of one group of clients, and to other parts of the programs of another group of clients. In this case, the programs are victorious all together in groups.
butt
The computer laboratory at the university has 15 computers with the latest software. Microsoft Office, computer-aided design (CAD) and the Microsoft Visual C++® compiler are installed. To avoid violating the security license of the software, the laboratory administrator must ensure the following:
To achieve the desired goal, the administrator creates three group policy objects with personally customized policies of the surrounding program. The filtering of the skin object of the group policy is done in such a way that it will not stagnate until it reaches one of the groups. AllStudents, EngStudents or else CSStudents(It depends on which group of wines are used).
Since the administrator wants the policy to stick to students only when logging into the laboratory computer (and not when logging on to personal computers), this is due to the vikoryst functionality of group policy - loopback. The setting allows the administrator to set the computer's Group Policy Object (GPO) settings to what they want to enter. If the loopback is set to Loopback with Replace mode, the computer's GPO configuration parameters will be locked until the user logs in, and the computer's GPO configuration parameters will be ignored.
Return to Table 8, 9, 10 and Malyunku 8 below.
For more detailed information, before configuring self-locking, go to statistics Group politics Windows 2000 (Windows 2000 Group Policy) at http://www.microsoft.com/windows2000/techinfo/howitworks/management/grouppolwp.asp (EN).
| Table 8 - Object of group policy of customer A1, associated with the Lab Resource domain | |
| Object of group policy of Koristuvach A1 associated with the Lab Resource domain | |
| Filter: For computers in the domain, the Apply Group Policy option is installed | |
| Disallowed | |
| Rules for the way | |
| %WINDIR% | Unrestricted |
| %PROGRAMFILES%\Common Files | Unrestricted |
| %PROGRAMFILES%\Messenger | Unrestricted |
| %PROGRAMFILES%\Internet Explorer | Unrestricted |
| %PROGRAMFILES%\Windows Media Player | Unrestricted |
| %PROGRAMFILES%\Windows NT | Unrestricted |
Figure 8 – Organization of group policy for a computer laboratory
| Table 9 - Object of group policy of the A2 customer associated with the Lab Resource domain | |
| Object of group policy of Koristuvach A2 associated with the Lab Resource domain | |
| Filter: For computers in the domain and in the CSStudents group, the Apply Group Policy option is installed | |
| Ensure safety for residents | |
| Disallowed | |
| Rules for the way | |
| %PROGRAMFILES%\Microsoft Visual Studio | Unrestricted |
| Table 10 - Object of group policy of the A3 customer associated with the Lab Resource domain | |
| Object of group policy of Koristuvach A3 associated with the Lab Resource domain | |
| Filter: For computers in the domain and members of the EngStudents group, the Apply Group Policy option is installed | |
| Enable Loopback in Replace Mode | |
| Ensure safety for residents | |
| Disallowed | |
| Rules for the way | |
| %PROGRAMFILES%\CAD Application | Unrestricted |
As a matter of fact, many koristuvachs in the process of robots at home were faced with the situation when installing an antivirus on the computer blocked the actions of the koristuvach. Anyone who has a problem can be helped by the timely intervention of a zahisnogo software security system or another device. However, not all users, who may have poor knowledge of Windows 7, know how to implement it. It is for these people that our article today is intended, in which we will talk about the situations that most often arise in which neutralization of antivirus software may be necessary, as well as about methods for disabling timely or permanently connection.
In what situations is it necessary to turn on the antivirus?
Before we talk about the methods of enabling antivirus in the Windows 7. operating system, it is necessary to look at the main situations that result from this operation. This is especially important, as long as you turn on your antivirus software, you will shut down your PC without protection for any hour.
One of the most common reasons for turning on anti-virus software is the use of pirated utilities that use special crack.exe files, KeyGen.exe key generators, or files like Patch.exe, which are considered to be malicious licenses. The whole point is that through these files, the antivirus recognizes pirated programs as unwanted or potential threats. However, in reality, pirated programs do not recognize any malware on the computer, but their installation may require the antivirus to be enabled.
Moreover, a similar situation occurs when files are entrusted from popular Internet resources such as DepositeFiles, Letitbit, Rapidshare, Turbobit and others.
Also, the use of anti-virus software may be necessary when working with resource-intensive programs or games on computers with low technical characteristics. The whole point is that for stable operation, the antivirus requires significant processor resources and RAM, which creates a great emphasis on the “backside” of the computer.
Moreover, some antivirus programs can conflict with those integrated into the operating system without protection behind a firewall. In this case, the problem may need help from an external antivirus or something else.
Time-hour deactivation of anti-virus software
Regardless of which antivirus you use on your computer, its installation on Windows 7 is absolutely identical. You can do this by right-clicking on the end of the anti-virus program located in the system tray on the Start menu row. After the context menu appears, select the item “Turn on protection immediately.” The deactivation time must remain with the antivirus. These programs allow you to specify the period for which it is necessary to pause the utility.
This method of enabling antivirus on Windows 7 works on all current antivirus programs, but is suitable for suspending work for a short period of time.
Complete deactivation of anti-virus software
To keep your software running at random intervals, there is another method. To do this, you need to go to the “Start” menu item and select the “Curve Panel” row. Next, go to the “Administration” section and select all the checkboxes next to the antivirus row in the “Configuration Adjustment” and “Automatics” sections.
Once all the boxes are ticked. We click on the “Ok” button, confirm the saving of the changes made and check until Windows 7 restarts the system. After this, the antivirus program is in disabled mode.
You can also enable the antivirus through the “Wire Manager”. For this click, you need to quickly press the key combination Alt+Ctrl+Delete, then select the “Start task manager” row. Next, go to the “Processes” tab, find the list of antivirus installations, click on the “Upload” button and confirm your intention to enable the antivirus
How to pin the Windows 7 firewall robot?
The operating system of the Windows family from Microsoft is supplied without integrated anti-virus software, and its functions are limited to standard protection, such as a firewall, also called a firewall.
To enable the Windows Firewall, you need to open the “Start” menu, select the “Control Panel” section, go to the “System and Security” menu item and go to the Configure the Windows Firewall section. To reactivate this service, you need to click on the “Disable and enable firewall” row on the left side of the screen, check the box next to the deactivation row and confirm the changes to be made .
To ensure that your antivirus software does not conflict with your firewall, you must add it to the list of faults. To do this, go to the system setup section “Allow programs or components to run through the Windows Firewall” and check the box next to the antivirus.
Select antivirus
If running the antivirus did not help, or you wanted to install another utility of this class, then you will need to uninstall the programs. However, the main problem is that it is impossible to install a remote antivirus using standard methods. To safely remove anti-virus software from your computer, you must put the operating system in safe mode or first install a special utility designed specifically for that purpose. Most current anti-virus programs can be uninstalled without violating such utilities.
Before you access any programs from the Internet, in order to access programs correctly, you may be required to disable your installed anti-virus software. from viruses. Since this product must be removed, first of all, it is necessary to eradicate the current actions in order to turn on the anti-virus protection in order to correctly install the security program. Once you have acquired the program, you will need to make a number of speeches to ensure that your computer is protected from theft.
Instructions
1.Open the installed anti-virus program from the taskbar. Right-click on the icon. Several anti-virus programs will appear at you, so you can open the security program to uninstall it.
2.Select “Zupinity zakhist”. If you want to protect your skin from antivirus protection, you can use the same protection, but you can also use the formula that means “Zupinity protection”. After the knot, turn it over until it rolls over.
3. At the bottom left corner, click on the “Start” button, then click on “Control Panel”, and then click on the “Security Center” button.
4. Take a look at your “Security Center.” You will show that your protection against viruses has been achieved. If you need to turn on the firewall, you can do this by clicking “Windows Firewall” at the bottom of the page. This will open a new window, allowing you to select “Off” to turn on the firewall.
5.Finish the installation and turn on the anti-virus protection by clicking on the icon on the desktop or selecting the “Start” button, then “Programs” and click on the anti-virus program to protect the computer.
6. Turn down the firewall at the security center. Check for viruses and protect against spyware to ensure that your computer is protected from spyware and viruses.
Instructions
Log in to the operating system from a cloud account, which has administrator rights. Open the Vikonati utility from the Start menu, type gpedit.msc in the row, and press Enter. In the user configuration window, select the menu called “Administrative Templates”, then go to components.
In the Internet console, select the “Restricted or allowed equipment” option, and then find the Group Policy settings. For advanced equipment, select the “Not specified” parameter opposite the skin position. After installing the parameters for the installation, the installation of programs will be available to users of shared cloud accounts.
Transfer the cloud record to administrators, protégés, and others, besides installing and installing remote programs koristuvachevi Other operations will be available. To do this, open the account panel and go to the Customer Accounts menu. You will need to see another mouse and select change cloud recording in the menu.
After this, click the button “Job as a computer administrator.” Save changes and go to the system, verify that the installed function, remote program and other functions have appeared for your computer.
If you want to customize the safety parameters of your computer in a special way, read articles on this topic, for example, the QI axis: http://stfw.ru/page.php?id=8718. When setting up the configuration for any other operating system user, remember that in some configuration situations it will be impossible to change the storage type. Therefore, if, for example, you are creating a personal account with shared rights for children, think carefully about the skin adjustments that you may need in the future.
If you do not need an additional supplement, then uncheck the box "Include vantage in the kit":
4. Install Adobe Flash Player depending on your browser type
For Mozilla Firefox browser
Click on the button Vantage on the page of the Russian website (sent to a marvelous thing) - on the official website there is a button:
1. When a dialog box for a file is displayed on the screen press button Save File:
you can turn to the proposition where you can work the work table:
Our axis of interest is the original Adobe Flash Player, on the desktop:
For installation on the cob Two click on the Flash Player icon.
2. If you have downloaded the Adobe Flash Player installation file without saving, then in the “Vantagion” window d Please click on the file name:
3. When the security system is displayed on the screen , press the button Viconati(Run):
or so (Yes) :
Note: Restore respect to the viewer, first of all get out of the situation
Persh nizh run yogo, You need to close the windows of all browsers for successful integration.
If you can’t spare anything, the attitude is to settle down with mercy:
When the window appears, close Firefox. The installer starts automatically after Mozilla Firefox is closed.:
After successful installation, select the update method. The automatic update option has been selected ( P When you select this option, the flash player update will be required without your consent when a new version is released). Adobe recommends using this option to update Flash Player.
You can also choose the following:
Press button Ready. Axis and everything: Adobe Flash Player is installed on your computer.
Inodes Adobe Flash Player installed as an add-on to the browser Mozilla Firefox. Which box appears at the top of your browser? advance "Firefox anticipates that this site (get.adobe.com) requires software to be installed on your computer"
Note: If you are using Internet Explorer 9, you must enable ActiveX filtering :
In Internet Explorer select Service>Bezpeka. If the ActiveX filtering option is installed, uninstall it:
Close Internet Explorer, and then restart it.
After pressing the button Starting to install(or Vantage) When you go to the information box, you can add it by checking the box and clicking on "Shut it up":
Below you will see the version of your Flash Player and your operating system.
PS. For whatever reason, if the installation did not go well, Adobe Flash Player must be removed from your computer:
Then restart your computer and restart and install Adobe Flash Player
For materials helpx.adobe.com, remontcompa.ru, www.dmosk.ru
Well, that's it, that's all. Now the article has become voluminous.
But, in principle, it’s not important to install Adobe Flash Player, you don’t have to do everything in a hurry, consistently and correctly.
This documentation has been moved to the archive and is no longer supported.
Software installation
Updated: Gruden 2008
Assigned to: System Center Configuration Manager 2007, System Center Configuration Manager 2007 R2, System Center Configuration Manager 2007 R3, System Center Configuration Manager 2007 SP1, System Center Configuration Manager 2007 SP2
The task sequence duration allows you to specify the Configuration Manager 2007 package and program that you want to install as part of the task sequence. Installation of the program package will proceed without delay, without completing the policy testing interval.
The duration of the task sequence is only saved in the standard operating system and is not saved after reinstalling Windows (WinPE).
You can adjust these parameters.
I'm Indicates briefly what is indicated by the name, which describes the action that is indicated on whose account. Description Allows you to enter reports about the activity at any time. Installation of one program Adjusts the sequence of tasks for installing one program. At this point the installation of the program is complete. To select the Configuration Manager 2007 package you want to install, click the button Look around. If Configuration Manager 2007 R2 is installed, you can select the Configuration Manager 2007 R2 Application Virtualization package when selecting a package. To select a program that needs to be logged in to install the package, use the shortcut list.The selected program must meet the current criteria.
- Vaughn cannot independently initiate re-engagement. The program must perform re-enablement using the standard re-enable code - exit code 3010. This ensures successful re-enable processing in this sequence. As soon as the program returns the exit code to 3010, the internal sequence logging mechanism is ordered to be re-enabled. After restarting the order, the task sequence will be continued automatically.
- Only after the entrance of the koristuvach
- Vikonannya with the rights of a koristuvach
- You must launch under the name of the local system cloud account, and not under the name of the client cloud account.
- She can interact with her desk. The program must run without notification or automatically.
Div. also
To remove additional views, div. Configuration Manager 2007 Information and Support [Information and support Configuration Manager 2007].
To download the documentation to the group of distributors, please use the e-mail address