Correctly adjusted Asus bios. Three ways to reset the bios on a laptop

Often, for an hour of work from a PC or a laptop, for quiet and other reasons, you need to upgrade to BIOS (BIOS). For example, it is necessary to run zavantazhuvalnu flash drive and reinstall the system from it, or reset the robot's memory or the processor, set a password, and so on. This article is dedicated to how to enter the BIOS, to the fact that it is not the skin of a laptop that is familiar with the process.

What is it?

BIOS is the basic system, the basis of any laptop and computer, which is a microprogram, which is inserted into the skin of the motherboard. Vaughn is simply necessary for right work all systems. It has selected all the most important settings, from which it is possible to gain access to any attachment "on board", change its characteristics and work (regular) mode. Bios is divided into a few logical divisions. The number of trochas varies in the skin company-virobnik. For example, one part includes the upgrade of the processor and memory, the other - hard drive, and the third one gives information about the temperature regime of the unit and one part of it. For help BIOS, you can zdіysniti fine lashing PC or laptop for your own personalization, set a password, speed up the system start and install other components.

How to eat there?

The most important moment is those who enter the BIOS to lie down depending on the brand of the laptop. As it was said above, the leather cleaner sets a single combination of keys to enter this microprogram. Have a link with the cym and find out the relevance of the food about those how to enter the BIOS. On laptops, the number of such combinations is significantly larger, lower on a PC. It is almost necessary that the combination (independently of the laptop company) should be pressed, if the image appears on the screen first, then if the laptop starts to take over. Hit the next fast, but for a larger entrance, work as much as possible, that time for the entrance to the BIOS is not enough.

It will become close to 3 seconds. To enter the BIOS on a laptop, you need to press the "Delete" key or one of the keys with the letter "F". Ring for the entrance to win F1 or F2, more like - F12. Sometimes you need to press "Delete" and one of the "F" keys at once. Turn your attention to the first screen of interest, in the lower part of it, it is written, how to press the next combination of buttons to enter this microprogram. As a rule, when buying a laptop, the client sees an instruction, in which it is written and shown how to enter the BIOS. On HP laptops, the original entry is as follows: you need to press the Esc button on the back, after which you will be given a choice, launch the menu to fix or start downloading from the disk. On some models of firms, the input is pressed by the "F10" key. On Dell laptops, BIOS can be launched by pressing the "F2" button. Warto means that the technique of this brewer can be done with an easy and manual launch of the menu. Biggest food parts about those, how to enter BIOS on a laptop, are asked by the experts of Acer technology. Here the program is displayed in a number of ways: "F2", "F1" or "Alt"+"Ctrl"+"Esc".

What do you need to get

Later, I guess, you figured out how to enter the BIOS, and also what it is. It is important to remember a few moments. First of all, read the instructions before installing. In a different way, pay attention to the screen of interest, as well as to those that are written on the new one. Thirdly, key combinations are most often represented by the "Delete" button, which is the "F" key.

BIOS - it is also needed important program. Vaughn is on all computers. This abbreviation is deciphered from the English movie as Basic Input Output System. Tsya program serve for pre-launch re-verification of all the practicality of the laptop, zdiisnyu їkh nalashtuvannya and zdiisnyu zavantazhennya operating system. How to fix the BIOS on a laptop? Bios on a laptop is as important as a normal, stable operating system. Without it, your laptop simply won't start. Buvayut vpadki, scho through wrong stitching The laptop's BIOS has been repaired. It is necessary to remember that laptop BIOS and the BIOS of a personal computer is totally different! So it's a unique version on laptops. We will especially protect that before yoga firmware varto buti. The need to update the BIOS on a laptop is due to some problems: Changing the priority of advanced devices (for example, for installing an operating system, it is necessary to install a CD-drive or a Flash-card). It is necessary to change the setting of the hard disk controller (relevant for the hour of Windows 7 installation). Vimknennya nevykoristanih or wrong outbuildings. Knowing or setting the password. To enter the BIOS of the laptop - it is necessary to press a single combination of keys when you are entangled, the stench sounds at the bottom of the screen as a prompt. For example, Press DEL to enter setup - this means that for the BIOS this laptop you need to press the DELETE button. As a hint every day, follow the directions to the instruction (which is included in the kit). After that, as you have reached the menu, the menu will appear in front of you. Fallow according to the model - it will be different. For example, in the BIOS menu, such as Award and Phoenix, the recognition of the keys is shown in two columns.

The AMI BIOS setup menu is standardized and sized both on laptops and on personal computers.

Setting the priority of the advancement in the BIOS of the laptop

For more options, the system's performance parameters are set in the Advanced Features menu, or simply Advanced (for extended BIOS versions, the BOOT menu). The menu, as it appeared, sometimes has a few points of interest (1st Boot Device, 2nd Boot Device and ...). If you want to get started from a hard disk (HDD), you should put it first on your list. When interested in such BIOS settings inexperienced disk storage devices, and immediately go to the HDD capture. If you want to get involved with a DVD\CD drive, then install it first in this list.

Password reset in laptop BIOS

All current BIOS versions transferred to the password setting function. It is called either Password protection or Sucurity. At whom you divided the menu, you should know 3-4 adjustments. Setup password or Admin Password - this function sets the password for entering the BIOS menu. Internal HDD Password - set a password to capture a hard disk, when the disk is encrypted on the hardware level and cannot be read without the entered password. System Password - the function sets the password, so you will need to enter the hour of the computer's skin capture.

On laptops, sometimes you can be a radical method against problems on a laptop computer.

Sometimes, in case of system failures, it helps only to reset to zero; Koristuvachev sled to know the main nuances of these techniques.

In the majority of cases, as the problem is not in the hardware part, it helps to turn the attachments to the industrial camp.

Special features of the skid

At first glance, the upgrade of the BIOS to the factory values ​​is nothing foldable. However, for a koristuvach, who is to carry it out in the future (and the greater number of leptopians can never get stuck with such a need), the deacons of nutrition are blamed on the process of robotics. Especially since the software methods did not help, and to get rid of it, you might need to pick up a laptop.

Causes of the animal to one of the ways BIOS dropdown you can use a sprat:

• throwing a forgotten, unknown (installed by another coristuvach) chi ruined password to the BIOS. If you don’t want to change anything in the adjustments, you may not need to reset it to zero;

• Wrongly typing the processor's socket, when the critical value of the memory timing or the bus frequency is set. Vtim, it is not recommended to break the chipset on laptops - not only through faults, but through cooling problems;
• the system is not zavantazhuetsya for unknown reasons if you want to go to BIOS, as soon as possible, you can go;
• the BIOS was changed by a non-fakhivtsy, which one does not remember, which parameter should be rotated in the output state.

BIOS drop options

For a portable computer, as well as for a stationary one, there are some options for solving the problem with a BIOS reset path:

• throw off the patch, vikoristovuyuchi interface itself (a way to go only, as far as to go into the BIOS);
• for help with a special utility (available for 32-bit operating systems);
• hardware (mechanical) way.

You can find additional methods of dropping in the documentation of the computer, as it was saved. Supplement with the power supply and instructions for specific model outbuildings; most often you can find them at the merezhі - on the site of the picker or, in the extreme case, on the forums of Vlasniks of similar models.

Skidannya through BIOS

For forgiveness, the manager of the coristuvacha has been upgraded to the value for locking, it is possible for the additional utility introduced into the BIOS. In order to speed it up, go to the interface by pressing the next function key. The most common is Del and F2, more commonly Esc, F10 and F11. It is more precise, as the key itself is needed to enter the settings, it can be right at the start of the system, if the information is shown in the lower part of the screen.

Porada: For the UEFI interface, the entanglement is too fast, and writing is not easy to look at. In this way, you can try to click on all functionalities, or you will need to know on the Internet for a laptop model.

After entering the BIOS menu, find the exit menu (Exit) and select the Load setup defaults item in the new one. Having waited for the discounts to be adjusted (choose the Yes button), you restore their factory values. After the onslaught of F10, you will save yourself.

Masters of some models of laptops can download BIOS menu and other writes, cream Load setup defaults. For example, a savvy Sony technologist knows here F3 Optimized Defaults, which is to say about those that after the onset of the function keys and the savings will be changed.

For modern models of Samsung, Toshiba and HP brands, the F9 Setup Defaults item is set, sound the options at the bottom of the right side of the screen. This means that for the drop it is necessary to press F9 and save the change.

For older models, the BIOS of which is modified in current options, you need to know the items Use Default Settings or Set BIOS Default.

When selected, a message may appear on the screen, which propagates either a drop to the factory settings (Load Optimized Defaults), or a transition to the settings, optimized for protection from failures (Load Fail-Safe Defaults).

At more vipadkіv the discounts have been restored to the date of renewal of the computer's practicality and the normal profit.

However, as in the process of resetting to zero, a pardon was made, for example, when choosing a nose, which the system will be taken advantage of, the coristuvachevi happen to go into the BIOS setup again and make small changes:

1. Write BIOS;
2. Go to the Boot section;
3. Select tab boot mode If it is written in the same field as UEFI, change it to Legacy;
4. Save change and revantagize the system.

The software drop method can be used. For example, for example, there is a password on the BIOS. Otherwise, do not go out until the next time for some other reason.

DEBUG utility

Changing the interface can be done with the help of a special utility for Windows. It's built into the 32-bit version of the OS and can be run as an administrator. Vikonati resetting s її additionally awkwardly, although it is necessary for the mother to have the rights of an administrator:

1. Open command menu (Win + R);
2. Enter the command debug.exe;
3. After that, how to see command line, enter from the keyboard according to your needs: "o702E", "o71FF" and "q";
4. After entering the skin command, press the enter button.

After the BIOS update, they are thrown off. And, having re-adjusted the system, koristuvach chimed in about the pardon and the need to re-verify the nalashtuvan. Then I would manually adjust the BIOS or remove the values ​​​​of the parameters in the same way as it was when I bought the add-on.

The only shortcoming of the utility is the impossibility of working in 64-bit Windows versions. This means that it is not suitable for most modern operating systems, as it depends on the choice of other methods.

hardware method

The hardware way to reset the BIOS of a laptop is needed in such cases, if the password is not known, forgotten, or if the password is not installed, but the BIOS still shows theft.

If you choose the password, then the choice of special utilities on exciting disk do not help. Single output - hardware zeroing.

BIOS reset button

Models of laptops, released for the rest of 2-3 years, allow you to do without a separate attachment. For the BIOS discount, it is enough to have the following vikonati:

1. Vimknut and turn the laptop upside down;
2. Check the bottom part for the presence of CMOS writing on the case, for which there may be a special opening for resetting the BIOS;
3. Insert into the opening a hostile object like a violin or a carnation and touch yoga pivkhvilini;
4. Turn off the laptop.

When opening the back of the laptop, it was not revealed, it was opened next.

Respect! Further instructions - only for today's PC-cores!

Keep in mind that you need to fix the cracks and sort out the computer before the warranty expires.

Before razbirannyam obov'yazkovo vydaliti peripheral outbuildings(Unplug the power cord, so that the computer is being charged, plug in flash drives and cables to connect to other equipment) and the battery.

Battery warning

One of the simplest hardware ways to download is to enable autonomous living on maternity pay. More laptop models to choose from custom BIOS that current hour is in memory, like to lie in a small battery type CR2032.

By removing the battery, you can disable the BIOS and reset all settings, including the password. Increase the fee to be brought for a period of 5 to 40 hvilin, depending on the model. In any case, attachments can be independent and there will be no dropping.

It is easy to get to the battery - it sounds like it is packed close to one of the edges of the payment and is not closed by other components.

Vіd koristuvacha vimagatimetsya:

• take off the cap;
• znestrumiti pristriy, viyyavshi battery;
• to know the miniature of life;
• lightly press on the clamp and pull the battery;
• get a deaky hour (in order not to repeat the procedure, it’s better to get at least 40 whilins);
• put the battery back with a path of the same light pressure;
• turn off the laptop;
• to reset the BIOS again, setting the year, the date, and the order of the system advance.

Deyakі pay mayut vbudovanu unknown battery. For them, it is impossible to change the battery, so it’s safe to go to the rest of the three ways.

Cleaning Jumper Switch

The method of switching the jumper of the foundations on the presence of a special jumper on the laptop, which is valid for the BIOS dropping.

To know, you need to remove the cover of a portable computer to allow access before paying. Most often, the jumper is located near the batteries, and the jumper is signed with letters like CLRTC, CLR and CCMOS.

The contact area of ​​the jumper is practically made up of three contacts. To reset the BIOS, you need to move the jumper one step: from the first position to another, or from another to the third.

While the jumper is being switched to the jumper position, it is necessary to press the button on the laptop and hold it for at least 10 seconds.

Obviously, when the power is turned on, the laptop will not turn on, but the signal will be transmitted to the jumper. After that, the jumper is turned to the outer position, the computer is taken, and the BIOS is re-set.

Porada: The replacement of a jumper on a laptop jumper may have a special button, pushing on a yak allows you to switch to a similar action. Press next with an olive or with a pen, pokavshi you yourself for 10 seconds.

Vykoristannya be it a hardware technique, in the case of removing the battery before the jumper flickered, although it is practically 100% guaranteed to reset, it can lead to the expiration of the guarantee of a new laptop, so it’s less likely to stop after the end of the warranty term.