What to do if you forgot the code to the safe. How to open an aiko safe
People write down the code on a piece of paper and choose it or eliminate duplicate keys - in such cases the power supply is high. What should we do without transmitting a similar situation and the safe altogether, instead becoming absolutely inaccessible not only to robbers and criminals, but also to the ruler himself?
The most urgent decisions will be upgraded to a special one.
Possible actions of the vlasnik, who have forgotten the code for the vlasnik safe:
1. We must first try to guess where the key is. Most often, after thoughts and efforts, the brain power of the brain is to find the key to the right at the end;
2. Since all your strength and memory does not allow you to get close to finding the key - guess what, you may have found a duplicate, or there may be another key from people close to you;
3. How to open a code safe? Safes equipped with combination locks can be opened independently as soon as you guess the code. Try a little more and maybe your memory itself will give you a confirmation. Perhaps the code contains numbers that are important to you or just your favorite numbers. You can also try to manually select the code by guessing, but in this case there is a risk of spending a lot of hours and still being left without a locked safe;
4. Now, if you have reached the fourth point, it means that the key has not been found, there is no duplicate and there was no one, and the code of the tablet is deeply seeded in the memory balls, so it is unknown for an hour (or information about the price life has sunk into the expanse of your memory). In such situations there are a number of ways out of an unacceptable situation:
- If there is a safe that you use in your hotel room, you can contact the security guards for help. Most often, such safes contain keys for emergency opening, so that in all cases, hotel attendants will help you and take away your valuables;
- If a safe that is hopelessly closed is of the lowest class, you can easily get away with a sledgehammer for everything - well, well, try to take it by force! Safes of this type are often considered to be in the worst class of protection from evil. However, after such violent attempts, you will have to buy a new safe or spend a lot of money on replacing the lock (this is because you won’t ruin it at all);
- More reliable safes cannot be opened using a sledgehammer or another forceful method. Shchob open the safe with a high class of malice, it is necessary to volunteer for special service.
Similar companies provide other services, such as installation and replacement of safes or key generation.
Well, your safe has been opened in front of you, what should you do after you have experienced such stress? The best thing to do is to withdraw your pardons so that your disrespect in the future cannot become a serious problem. Get a duplicate of the key and store it in a quiet place, you can share the dungeon with a nearby person - this way there will be two of you and if a similar situation with the loss of the key repeats itself, the chances of your reversal will be greater. dbadiorlivimi. For electronic locks with a code, the quickest way to do this is to write the password for the lock on a piece of paper and save it in a safe place (you can also share it with someone close to you).
How to open an AIKO safe?
Lock PLS-1
The PLS-1 lock is installed on safes of the Aiko “T” series.
To open an Iko safe using the PLS-1 lock
1. Press the “*” button; the green LED will light up to confirm the lock.
2. enter the code of the customer (the code can be composed of 4,5,6 characters)
3. Press “ENTER” Once you have entered the correct code, the lock will recognize your code and confirm the correctness of the code with a second sound signal and a green LED that will light up. The lock allows 5 seconds to open the safe.
4. Turn the handle and open the safe.
The protection for selecting a code on the PLS-1 lock is implemented in this way. The lock “locks up” for 5 steps if more than three incorrect codes are entered. The blocking mode is confirmed by blistering red light to the skin for 5 seconds. After unlocking, you must enter the correct code.
On locks with a backup key, you can open the safe through the key hole with the key included in the kit. To open the safe, remove the cover from the plastic panel (between the keyboard and the handle), insert the key and turn it against the directional arrow until it stops (approximately 25 degrees), turn the handle and open the safe. Do not save the key in the safe.
Elements of the Aiko safe are reworked parts of the lock under the keyboard. If there is not enough life, then when pressing * the sound signal will sound five times and the LED will flash. Do not cover the safe with batteries, but replace them as soon as possible. The PLS-1 lock has 1.5V AAA class life elements
If you cannot open the safe, please call our customer service zamok911. With us you can get advice on how to operate code locks, change codes, replace and open safe locks. The customer service master will help you open the safe without damaging the safe.
(if you have found peace with the statti, be kind, write to us [email protected])
It is very important to see the electronic catalog of goods e-katalog.ru (http://www.e-katalog.ru/), which promotes equal prices and no less. There are no different types of safes with an electronic mechanism. The most famous printers at the moment are AIKO, FICHET, KASO, Fire King, POL, VOLBERG, KONTUR and PRACTIC. An electronic combination lock can be included with the safe, or it can be combined with a key lock. In the first step to open the safe, ask for the following steps:
- Keyboard activation
- To do this, you need to press the button on the panel. Most often the activation button is “*”.
- For such safes, this procedure is not necessary.
- Dial a digital code.
- The code is entered manually and consists of a small number of characters: from 3 to 17.
- Confirmation of entry.
- This time is activated by pressing the key: “#” or “ENTER”.
- This may be accompanied by a sound signal, a green light coming on, or the words GOOD, OPEN, or the like appearing on the display.
- If the code is entered incorrectly, the word “ERROR” appears on the display or the red light goes off. In this case, the trace will turn to the first crocus.
- Turn the handle.
- The hand of the pen begins to straighten behind the anniversary arrow.
- This period lasts only a short amount of time, and the shutdown mechanism is only activated for a few seconds.
You can only change your personal code when the safe doors are open. When you do this, turn it over correctly and, without closing the door, enter it a few more times.
If you enter an incorrect password in electronic safes, there is a mechanism for blocking the keys for ten hours. Moreover, with new skin abnormalities, this hour increases (from 5 to 15 hours). For this type of problem, you need to check the hour and try to enter the correct combination. It is possible to substitute two codes, one of which will take precedence over the other. Office safes must be equipped with this option to allow access to them by an authorized person or other employee. In this case, the authority can block the access of some practitioners by sending them without knowing the code, since there are great codes that are more privileged.
An electronic combination lock can be equipped with a master key. Call for such safes to be used in hotels and hotels. In this case you can use a key, regardless of the previously entered password.
It is also important to remember that electronic safes operate on batteries and replacing them promptly will help alleviate problems associated with the discharge of batteries.
In order to avoid statements about current development companies, you can take a look behind the scenes of the activities of the KR Properties company and become familiar with the services offered on the virtual website.
Now let's take a look at the combination lock from the unlocked type safe. It has gained significantly greater width. A safe with such a lock is practically at your office.
Behind the design and behind the security authorities, an open limb lock is simpler than a closed one, regardless of those that sound very similar. And the axis of the principle of operation and dialing the code is fundamentally correct.
The head of the limb lock is to encircle the bolt. If you have a combination dial lock, you will not be able to open the safe door by pressing the handle or turning the key. If the code is not dialed, the bolt will not move - it will not hit the code discs. The hinged lock of the open type does not have a bolt. As locking elements, the code discs themselves act here, as well as the code elements of the lock.
The principle of operation of a combination lock of a limb-opened type of attack.
The dial knob and code disks spin one entire wrapper. First drive disk. The axle must be firmly secured with a cotter pin. The other three (there are also two) are driven, they can rotate without the drive disk. In which the conductive disk always interacts with the other, the other disk transfers the torque to the third, and the third to the fourth. From now on, the “pinning” of discs when wrapped in one package will be carried out in the same sequence. The discs stick out one by one through the steps. The moment of the connection of one disk with another can be heard almost behind the characteristic metallic clacking sound.
The leather code disk of the open dial lock has a code groove.
When the code is entered correctly, the code slots on all four disks are stitched into a single code slot. Now, when you close the safe door, it is not important and it is possible to “fall” into the groove when turning the key or handle.
Well, you, who know for everything, have several numbers to the code (you can only tell me that you know them, but I stand in charge, trying to teach you how to use them), but you don’t understand how to dial it on your safe. Follow the instructions below and you'll be fine.
Instructions for using a mechanical combination lock (open dial).
The index ring of an open-type limb lock bears only one mark (usually a red color). It appears at the highest point of the index ring.
When dialing a number, the code will be entered directly opposite the work mark when turning the dial knob.
To dial the code, you must:
1) Scroll the dial knob behind the year arrow three times, skipping I'm sorry number of the label code on the index ring. Visible I'm sorry the code number is directly opposite the index ring mark on the fourth run.
2) Twist the dial knob against the year arrow. Visible friend the code number opposite the index ring mark on the third run.
3) We wrap the dial handle behind the year arrow. Visible third the code number opposite the index ring mark in another escape.
4) When wrapping the dial handle against the anniversary arrow, the quarter The number of your code will be opposite the index ring mark.
The code has been dialed. Turn the key and/or the handle of the safe near the opening and open the door.
UVAGA!!! When dialing the code “turn” and “finish” unacceptable. If, when dialing the code, you have missed the number, having “jumped” the required number, dialing the code begins again from the first point.
The dialing code is correct, but the doors just don’t work and the key doesn’t turn? This may be due to the fact that the combination lock on your safe is tampered with, or you may simply be tempted to enter the wrong code. In case of any emergency, you will need the services of a qualified specialist who works
Raptova of the safe lock is one of the signs of unauthorized tampering. Even if the safe is opened, or if the lock is damaged, it is impossible to tell with an outside glance. Please take care of the necessary visits.
The safe cannot be opened with a key.
Don’t rush and don’t stagnate the great zusils. Do not vikorist pasatizhi, more important than that. Do not rush to call for help from the “strong men” and “knowledgeable men” - most often they break the keys themselves.
Turn it over so you don't mix up the key.
Make sure that the castle is closed, especially if there is more than one of you. They often try to open an unlocked lock.
There are no foreign objects, no bent key, no cracks on anything.
Re-convert until the key is inserted until the end. If inserted correctly, the key will turn slightly and not get squeezed.
Smoothly turn the key with your right hand, while pressing it “in front of you.”
If you can’t open the safe, call the master. A broken key can even complicate the situation.
The code safe cannot be opened
Check the correctness of the code and the order of typing. Even if you didn’t follow the rule “Don’t fool yourself!” Haven't killed anyone yet.
FOR MECHANICAL LOCKS
The locks require precise dialing. Carefully smoothly type the code following the instructions. Return respect to direct recruitment.
Often, problems with limbal locks occur in people with poor eyesight, poor coordination, tremors, and in people of advanced age and sleepiness. Whoever is in trouble, ask someone you trust for help.
It is possible that the numbers will be incorrectly assigned due to wear or obstruction of the scale. So, 45 is read as 15, 80 as 60.
FOR ELECTRONIC LOCKS
Check the manual and battery contacts.
Dial the code, listening for a moment and the sound of the indicator. Sometimes one of the buttons allows a bypass or double entry.
Check that there are no buttons, they are stuck or stuck.
Use the emergency key as soon as possible (unless you have used it).
The castle can be locked for the last hour. Do not chew for 15-20 minutes, then try again.
If you changed the code, try entering the previous one. Perhaps the change did not occur.
On inexpensive Chinese safes, a round push-pull (pump-action) lock is used as an emergency lock. The wine is German and easy to polish with a twist or a light blow of a hammer. Don't bother anyone. The safe will not open, and the parts will fall out of the middle and fold up.
Call a specialist. In most cases, the safe can be opened and restored without damage.