Recently the tp link routers have been installed. Connecting the router to the router.

If you want to improve your productivity homemade festoon, Then vserioz varto think about buying two routers. Having connected two routers on the same local grid - you will take care of the adjustment range Wi-Fi It's wonderful to go for a booth, as well as for officials. There are two methods for connecting routers as they go.

1. Z'є

Croc 1

Before you start, you need to make sure you need your router for the bridge. You can marvel at the price in the documentation of the router, as well as in the Internet. If your router does not accept the bridge / repeater mode, you can always download the DD-WRT program, you can also enter this function, if you install two routers separately in one thread.

croc 2

Install the router, so it will be much easier to find out more about the connections. The picture of the end of the possession can be turned on its own.

croc 3

Vibrate the main router with two, head-to-head є the appearance of strong antennas, so that you can easily install another router. By connecting the main router to the modem, connecting it to one, spillo local mesh on your PC, it is carried out as if the installation of the childless mesh is idle. Do not forget about the IP address, DHCP range, do not forget about the mask.

croc 4

Connect another router to a PC or a laptop or a laptop for an Ethernet cable, or for a router you do not need to connect a router to a modem. Write a quick display of the router's setup on your computer. Know the Wireless and Internet tabs.

croc 5

If the router can be configured to connect to the bridge, then by opening the Network Mode (Wireless Mode / Connection Type) configuration, vibrate Bridge Mode (Repeater Mode / Repeater Bridge)

croc 6

Reverse the mask of the secondary router is identical to the main one. Set the IP range. (For the butt, the main router is 186.567.1.1 and the second one is 186.567.1.5)

croc 7

Name the two Wi-Fi connections as different names, which are the main nobility, but the password is the type of connection that is responsible.

croc 8

At the end of the stage, install a secondary router on the spot, but it is not guilty of changing over half the range of the head one.

2.Connection of routers in one Wi-Fi network

Croc 1

Yak and in the foreground method, vibrantly strong Wi-Fi router, Call me vibrate new router with advanced configurations. If you make two identical routers, then it’s not important that you become the head one.

croc 2

You will be able to use a (secondary) router that does not have the function of distributing the Internet when LAN-to-WAN is turned off.

croc 3

Rise of the offense of the router near the laptop or the computer, so the hour of fixing the mouthless hedge will be effective. As you go through the process, turn the router on the cob mice in the background.

croc 4

To carry out all the crocs to the end, vibrate the day. There are two types of business:

  • LAN-to-LAN (local netting) - allows you to change the size of the range of nettings, and connect a large number of attachments.
  • LAN-to-WAN is a global netting computer, which allows you to put interconnection on the deyak_type attachments. You can access the site, as you can open it, and to which access is possible.


croc 5

The main Wi-Fi router goes to the modem, and then bring the router through the Ethernet cable to the computer. Then the installation went through the same method, as in that case we connected one router.

croc 6

For a secondary router, go to the configuration window:

  • If you are using a local network (LAN-to-LAN), then you can enter the IP addresses so that the address of the main router is entered, and the remaining number is one more unit.
  • At the beginning of the global computer framing(LAN-to-WAN) the process is the same, only change the digit by one more unit.

croc 7

Set up a DHCP server on the secondary router. To connect a local grid, turn it on and off, if you install global netting Then the addresses are guilty of being in the range from 2 to 50 on the remaining digits.

croc 8

Insertion of channels on mouthless routers(For head up to 6, for secondary up to 11)

croc 9

Distribute the router to your home (office) mission. Routeri is guilty of using an Ethernet cable.

croc 10

Find the router between yourself so that you can connect the LAN by connecting to the main router.

In the first place, if you didn’t go through it, it’s written, marvel at the video below:

How to connect the router to the router via wifi? Such power supplies often ask themselves if they want to expand the coverage area of ​​the router.

The staff of the victorian of two common outbuildings can be signposted to polish the connection from the Internet and the zone to access the Wi-Fi practically in two or three times.

It is possible to expand the coverage area of ​​the router by using the antenna power. You can also do it, but you can buy it and put on a bigger antenna. This way is less efficient, even if you don't need to add one new router.

However, if the methods of using the antennas did not produce any results, you can try to set up an access point for two routers at once. For a cob, it is necessary to approximate a diagram of the mutual connection of two attachments.

Schematic butt for connecting two routers

If you want to connect to that router, to transmit a signal at a greater distance, then become familiar with the basic scheme of connecting two attachments. It is possible to register for the connection of the hedge in the apartment and in any other private sector.

Orієntovna diagram of the viglyadє by the offensive rank:

According to this scheme, there are only two ways to connect two routers mutually: via wire and bus providny way connection. A clear presentation of the lecture.

Connecting two routers to a wire

The easiest way to connect two routers to one access point is a cost-effective way. For a robot, you need to know the most extraordinary UTP cable, which is called a twisted pair. You can get it in any kind of store.

The average price of this type of cable is 20-30 rubles per meter. Zovnishny viglyad Internet cable of twisting of images on a little below:


Connect two routers for additional twisting bets, correct:

  • Perekonayte, scho offend the sides and the cable may interfere. Also, change the position of the cable from one router to the other;
  • Take two routers;
  • Connect to an additional cable. Connect a pair to LAN port that router, which can be set up to connect to the Internet. Inserting the cable to the unconfigured router in the WAN pink. The first router will transmit a signal to a distant place;
  • Now, just set up the router to connect to the Internet in a standard way, and the dynamic ip is assigned to the router.

It's joy! A shortage of this method of connecting a pole is that, in some cases, it is not easy to lay a cable on a large city (if you want to install a cable between a deck on top, for example).

Also, the cable can be cured in an hour to mechanical breakdowns, as it is unfortunate to correct and to bring a new cable.

Mouthless connection mіzh routerіv

The Danish type of connection does not have any wires. However, the folding of the way of the field lies in the fact that it is even more important to correctly set up possession:

  • Change the router until the Internet is connected;
  • Another router will be an access point;
  • Set up your first router in a standard way, When only one router was installed;
  • Now connect your computer to your router;
  • Behind the help of the Keruvannya panel, open a window on the adjustment of the mouthless hedge, in which you choose the Internet protocol.
    Choose another router and set up the IPv4 protocol for a new one. Then click on the power tab and enter the following text (without paws) in the field of the attacker's address (without paws) - "192.168.1.254";
  • Save your setup and open your browser. Enter "192.168.1.254" in the address row. The menu for adjusting another router will be displayed;


  • Push on the "whisper" button;
  • See the window with the list of available mouthless hemstitch... Vibrate the grid of the first router and tighten the keys for saving;


  • Reload the offense of access points.

For kids, they just need life to improve the range robots wifi... Alle the installation on the router is trying not to bring a bad result. So what are you doing? I will give a problem You can opt to connect one router to the other for the additional connection, allowing us to increase the Wi-Fi radio frequency twice as much.


Otzhe, how can I switch one attachment to the last one?
Practical isnu two main connection methods, but also:
1. Connection via Wi-Fi.
2. Connection for an additional LAN cable.

The basic diagram for connecting the router to the viglyad's router is as follows:


For the bob, it is necessary to configure the computer for the access point. For tso you need to go to the menu "Start - Control Panel".

In the wake of the umovchannyy ask for a look at the categories, we need to switch to « other icons» abo "Great icons"(All lie in your likeness).



At the left column of the menu we know the item "Change adapter parameters" enter, embossed with the right key of Misha on "Connecting to a local mesh", In the selected list, vibrate "Vlastivosti".

In the list of components, which can be used to connect a video "Internet Protocol version 4 (TPC / IPv4)" i embossed button "Vlastivosti"... Move the speck to "Vikoristovuvati offensive IP addresses"і the settings are made:

onslaught "OK".

Pislya in the address row of the browser is entered 192.168.1.254 i is transferable. As a result, you will be able to see the authorization "Login and Password" for the substitutions "admin і admin".

If you enter a login and password, you can use it on the side of the screen, and in the onslaught menu "Mouthless mode" — "Establishment of a mouthless regime".



With the inclusion of a WSD onslaught "Poshuk".


As a result, the router knows a number of access points, and from them its own and onslaught "Pidklyuchiti".


Let the computer automatically redirect you to Wi-Fi settings, De it is necessary to enter the password before "Save"... As a result, TP-Link connects to another access point to repeat and expand the coverage area of ​​the mouthless mesh.

Additional LAN connection

vicorystannya given the wayє We will coat it with routers that will change 30 meters.

At the same time, there are two options for connecting behind an additional LAN.

Option 1

z'єdnuєmo LAN port one router WAN portіншого. Another router at the same time will be the first to open the Wi-Fi network.

At the same time, it is necessary to convert the inclusions on the first one DHCP server... Whenever there are connections, then it turns on.



It is necessary to carry out the standard Wi-Fi settings, save the settings and restart the router. As a result, the other router will reject the IP address from the first one and then the first client.

Option 2

z'єdnuєmo LAN port one router LAN port іншого. As a result of childless routers, the same addressing is matched, albeit the name of the net is SSID.

In the process of setting up, before it is necessary enable DHCP server on another annex.


If routers have the same IP addresses in a local mesh, then it is necessary to change it on another router. For tsogo we go to "Merezha - LAN".


Another router needs an IP address in the same pidmerezh, ale de nebud in the range - for example, two fifty-third or 254th address. It is also possible to change the situation, for example, on 192.168.2.x.

Zberigaєmo adjusted and attacked up to robots.


With the great difficult to come up with the correct name for the whole statty. And all-one is not in vain, but the essence is clearly visualized. About all types of options:

  • Nalashtuvannya timchakovy local fancy;
  • How to create an access point from the router;
  • Two routers. Spіlnі hemіrzіvі resources;
  • Cascade connection.
given:

Two offices, roztashovani in one day, but not ordered. Stretched out with them twisted pair... In one office є Internet. And then there are two routers with wi-fi.

zavdannya:

Z'єdnati computers in two offices in one local net. Laptops are responsible for connecting to the skin office via Wi-Fi and access to the stock resources and printers. And, naturally, the Internet is to blame.


Note:

The assigned manager has two routers in my order TP-Link 741 ND... Pislya vikonanih robit, I am already in my home minds protesting the solution to this problem on two routers and ASUS RT-G32. All pratsyuє!

think about it:

Shvidko and inexpensive!
Oleksandr... Private computer meister.
+7-915-453-37-31

Decision:

About the modes of the router's robots: No change is required. Just overload everything by default. (Yak pislya onslaught reset)

About Wi-Fi: Droplets on routers Aі B it is possible to set the same or different. For any kind of attachment, connecting to one of the number of mouthless fences, there is access to ALL of the framing resources and printers.

Adjustment for router A:

  1. Establish a connection to the Internet;
  2. Enable DHCP;
  3. Establish Wi-Fi and encryption;
  4. Set the IP address of the router 192.168 .1.1
  5. Save settings and reload.
  6. Connect the cable that is currently in another office to the LAN port.

Setting up for router B:

Important! Do not plug in the cord that comes from router A, unless you go to step 5!

Uninvolved on a wide assortment of hard-to-reach outbuildings, building a stable WiFi, power supply to connect another router to the Internet through a router that is previously relevant.

Even the installation of a bridge router router is often more efficient and less expensive than a more expensive bitch router. It is especially possible to bring such cinnamon to a private booth, for a small office, perhaps with the best financial vitrates (and a tedious viprominuvannya) to “cover” the Internet when you need square meters.

In accordance with the statistics, it is clear that it is possible to connect the router to the router and correctly connect two routers to one net.

How to connect a wifi router through a router?

There are two ways to connect two routers in one mesh - with an additional LAN cable, or by Mouthless WiFi ring.

For a clearer understanding of the given plant, a short view of the bridge in the back of the router and router roles is visible. For example, we call one of them "A", and іnshy "B".

Router "A" is meaningfully "head role" - without interconnection with the Internet, and router "B" will play the role of "repeater" or "repeater" and transmit the signal from the "A"

How to connect the router to the router via a cable?

For the cob, we can pick up the LAN-WAN routers (on the Tp-Link model). Daniy is an option to build more stable conditions, not LAN-LAN.

Nalashtuvannya router "A".

To connect a tp-link router to router tp-link it is necessary to change the position in the yogo nalashtuvannyah.

Your first setup The first router is not vimag.

Let's move on to Router "B".

In nalashtuvannya it is necessary to set a dynamically rejected ip address:

  • - “WAN” tab - “Data type” - “Dynamic ip-addresses”;
  • - if the lower parameters are specified "Ip-addresses", "Passport mask" and "Main gateway", then mist pratsyu, and router "B" є by the client of router "A".

How to connect the router to the router via wifi?

For a cob nalashtuєmo bezrotove z'єdnannya on router "A":

  • - enter 192.168.0.1 into the browser (addresses can be amazing, wonder), “login” and “password” for “admin”;
  • - on the deposit "Mouthless mode", come up with an imer (SSID) and a password (guilty, but it’s easy to forget for you, albeit in the same hour);

  • - another parameter is "Channel". It’s not necessary to use it, but it’s not recommended, so that the visibility of the channels in the fences on the outbuildings will be safe. stable robot fathoms.

Now let's go to Router B.

Infected a large number of hemmed devices adapt to the WDS technology and its own kind of repeater.

  • - Go to the web interface of the attachment;
  • - On the deposit "Mouthless mode", memorize the fields in the same way as setting up the router "A";
  • - At the bottom, select the item "Enable WDS" - appear in the window with the parameters;

  • - There, change the SSID (router "A") and BSSID (router "B"). Click "Pochuk" and at the "List of access points" window, select the connection, tune in to the "A" router;
  • - Save your configuration with overloads. At all, the configuration of connecting the router to the router via wifi is completed.

Cable connection of two routers up to one mesh according to the LAN-LAN type.

As it is already said, the LAN-LAN connection is very stable, not LAN-WAN. However, for the "intricate picture" everything is clear, like connecting the tp-link router to the tp-link router with such a connection.

For router "A", regular adjustments are not required, all changes are carried out only on router "B":

  • - Go to the nalashtuvannya attached;
  • - "Merezha" - " Local hedge". You will be able to unite a confrontation for one more;
  • - On the "DHCP" tab, select "Connect".

Nalashtuvannya completed.

How to connect the d-link router through the d-link router?

Now you can connect all the same two routers "A" and "B" to one hedge, also of the D-Link brand:

  1. 1. How to set up a router how to relay?

V established WiFi just make it look like router "A" and save your configuration.

  1. 2. Setting up a mouthless bridge on router "B":
  • - Tab "Wifi" - "Turn on" - "Look for a dumb fringe";
  • - In the list below, see the "head of the net" and set the same password as on the "A" router;
  • - Go to the "WAN" deposit to open a new connection (to click on the "Add" button);
  • - "Type z'єdnannya" - "Dynamic ip";
  • - "Interface" - "WiFiClient" - "Zastosuvati";
  • - Save the adjustment with the device re-installed.

Practice has shown that it is the most stable to accept bridges with Tp-Link models. If the parameters are identical, the D-Link hardware will not have a lower quality call: the most frequent changes occur, the speed drops, etc.

© 2021 Mobile and Computer Gadgets