And under a loud voice. How to put your voice on "Wordi": two ways
Sometimes such situations arise when in the text it is simply necessary to put the voice of the word above the sung letter. This is most often necessary when writing professional texts, methodical insertions, etc.
You can do this in a number of ways, including speech, and these methods work exactly with versions of Word 2003-2010.
Method 1 – through the “Insert” tab
Let's go to the "Insert" tab and look at the top right corner. Bachimo sent the “Symbol” there and pressed on it. A small list of symbols will open, and “other symbols” will be written at the bottom. Click on it and a full menu of symbols will open. Now we look at the "Dial" menu, where we need to select "united diacr." signs." We choose them and find out our symbol out loud. Click on the new one and click the “Insert” button. That's all. Now, above the seen letter, a voice will appear, which is what we need.
Method 2 - use hotkeys or insert a macro.
It works like this: another word, and after the letter we need, the cursor is inserted; After adding the other numbers 0301 or 0312, press the alt+x key. That's it, the voice itself will fall on your letter. You will be deprived of completely improving your word.
Before speaking, this method can be simply refined by adding a button to the macro on the control panel. This method is the most straightforward, although there are two methods described above.
Recently I was faced with a task - to understand a number of rules from the Russian language, and when it was written down, it was necessary to sort out the voices in the words. I’ll figure out how to do this and in this article we’ll tell you about two ways to set up a view. The methods are universal and suitable for Word 2003, 2007, 2010.
Inserting directly for additional hotkeys
Perhaps the simplest way is to use Word's hotkeys. This is done manually, and you don’t even have to go into the menu and select the required items. To add a voice to the hotkeys, you need to place the cursor after the letter over which you need to add a voice. Then, without spaces or pads, we write the numbers “0301” and press the key combination “Alt + X”.
As much as you can do with a picture, everything worked out. Now I’m doing it myself in this way, remembering 4 digits and a combination is no problem, but it saves a lot of time, since the robot has a great document.
Inserting additional additional symbols
Additional symbols are inserted in different ways. Let's first figure out how to work with the 2007 and older versions, and then we'll look at the 2003 version of Word. For the 2007 version, you need to go to the “Insert” section, click on the “Symbol” section in the menu and select the “Other symbols” item.
For the 2003 version, you need to select the “Insert” item and go to the “Symbol” section.
Further, the instructions are the same in all versions, as long as the interface is the same. For the beginning, place the cursor after the letter above which we stand. Next, you need to select the “Unified diacritics” section and select the symbol there.
Please note that below the code for the symbol is “0301”, so that you can find the correct symbol otherwise. Then press the “Insert” button and appear above the required letter.
It’s easy to insert a voice, isn’t it? To master Word, bookmark the site and visit us more often and learn our lessons.
Tricky words from the Russian language! And I don’t say at once about such things, for example, that one gets nervous or is phantasmagorical. I'm talking about the simple ones homographs- words that are written differently, however, may have a different place and sound reading. For example, I will list a number of homographs:
bavovna ta bavovna; proteins and proteins; atlas and atlas; Boroshno and Boroshno; interruption and interruption.
In fact, homographs are very different and divided into 4 groups. I respect that authors, and especially proofreaders, should pay attention to them.
1. Folding way
It begins with the fact that in the “Insert” menu, after a little bit of nerves, you have to find out the sign out loud and insert it into the word. The procedure is not complicated, but it takes an hour. And as long as I value your precious time, I will not force you to read the letter.
2. Forgive way
This way, you won't be able to make a lot of noise and fuss. Everything is very simple.
Option A:
Let’s take the word that needs to be spoken, for example, interruption(name name; an interruption appeared before him);
We place the cursor after the letter, where the voice falls: about Ι grazing;
Press the Alt key and press the number 769 with your right hand (!) on the numeric keypad. Release Alt and sign out loud Already vartuє.
Option B:
At the required word, place the cursor after the letter with a voice;
On the digital keyboard, right-handed (!) press the combination of numbers 0301 and 0312;
Now press Alt+X. These keys often turn the numbers into a sign out loud.
3. Method “once and again”
This method suits me best! In essence, it is the most visible. Always put a sign on the hot keys without any hassle. If you want to program hotkeys, do the following:
Open the "Insert" menu;
In the remaining column you will find “Symbol”, “Other symbols”;
In the window, find the “Dial” field and in the list that appears, put « combined dia. signs» ;
Immediately find the “Sign Code” and write the code: 0301 or 0312;
Now press the button " Associated keys", a new window will open " Setting up the keyboard»;
In the field New keys» Select the keys that will be used manually to insert a character directly. I set Ctrl+6;
When typing text, there is sometimes a need to put a voice over the letter. Unfortunately, it’s not so easy to earn money, as there is no special button for inserting this symbol. Prote, zavdanya is completely virishuvane. In this article we will look at two ways in which you can put a voice over the letter behind the keyboard, as well as one way to change the name of the bear.
Let's set the voice to help Alt-X on the keyboard
In order to put a voice above the letter on the keyboard, you can use the numeric code “301” and the key combination Alt+X.
Try it like this:
- Place the cursor after the letter you need to comment on;
- Immediately after selecting the letter, dial the numeric code “301” (however, without spaces);
- Press the keys Alt+X;
As a result, the numeric code is no longer known, and a sign appears above the remaining letter. The picture below shows the order of this method.
The numeric code “301” allows you to put a right-handed voice. If you need to make direct deposits into another bank, then use the numerical code “300”. Under what circumstances will other lives be deprived of such themselves. Enter the letter, dial 300 and press Alt+X on the keyboard.
Set the voice for help Alt on the keyboard
You can also put a voice above the letter using the additional Alt key and the numeric code “769” on the additional numeric keypad.
This method works a little differently:
- Place the cursor after the letter you need to write;
- Press the Alt key on the keyboard;
- Without releasing the Alt key, dial the number code 769 (on the number pad on the right side of the keyboard);
- Release the Alt key;
As a result, a voice will appear above the letter, after the cursor is standing.
Let's vote for the additional function "Symbol"
If you are typing text in a Microsoft text editor, you can use the function called “Symbol” to insert it out loud. This method is not as quick as the two before, but it does not require the same numeric codes. Moreover, you won’t be able to use the keyboard as long as you keep trying to get the bear’s help.
In order to add a voice, you need to go to the “Insert” tab, click on the “Symbol” button and go to the “Other symbols” section.
After this, a list of available symbols will appear. In order to set a voice, you need to select the character set “United diacr. signs" and see one of the symbols out loud, right-handed or left-handed. After selecting the desired voice, you need to click the “Insert” button. The result will appear above the letterbox after the cursor is placed.
Next, to insert a symbol, you can select the list of remaining selected symbols, which appears after pressing the “Symbol” button.
Similarly, behind the “Symbol” window, you can insert any sign that is not on the keyboard, for example, an apostrophe.