Through what treasure pc. The computer works perfectly. System disk clogged

This article has been collected specifically for the purpose of helping the average business owner clean and set up his or her computer so that you can begin to work faster. Maybe not much faster (and don’t trust programs that expect multiple increases), but it will become more noticeable. For the sake of focus on computer professionals who do not have a particularly deep knowledge of how to work with a computer (or a laptop - the principles are the same).

You often find yourself in the right place with the same type of work before you speed up your computer. Be sure to work with clients with a hard-working machine, with a fresh Core i3-i5 processor and 4-8 GB of RAM on board. Both those and others are a decent configuration. However, such a computer does not perform well at all. Typical stocks:

• Starting Windows takes nearly ten minutes;
• visually noticeable “galma” when combined with folders and menus;
• very inefficient launch of programs and browsers;
• Word opens up.

All this is amazing for the heavy-duty nature of the computer. The correction is similar to the galvanized shvidko. Golovne, demand for the nobility, de kopati. I will let you know, yes...

This article describes part of the problem, when some Windows are removed, they still have a good feeling of “flying” and delighting, as before, just like when purchasing/folding. The instructions are insured for the primary accountant. The skin below can be painted to the fullest extent, but such detailed work is not necessary so that the computer can work faster.

So, let's look at the reasons why the computer starts to behave in order.

Problem 1. Overheating of the laptop (laptop), computer

Therefore, your beloved begins to suffer through a number of fatalities of exploitation. There may be a number of reasons: the cooling system is not functioning properly, or the thermal paste on the processor has dried out. As a result, the processor overheats and its productivity decreases. The CPU “skips” calculation steps and runs idle to cool down on its own.

How to prevent processor overheating on your computer?

Cleaning before sawing. Instructions for teapots

It is necessary to remove the computer cover and check whether there is a saw on the heatsink at the center of the board (CPU heatsink). If this is the case, it needs to be blown out. Blow through the bag with a thin and strong jet, you can remove it with a saw. However, you can wet it with a saw cleaner, but it is less effective... Before the procedure, clean the saw cleaner of the vacuum cleaner so that the air blows stronger.

As a substitute for the saw sucker, you can vikorize a humic pear. But not all suckers are in the bathing mode. Go to the pharmacy and buy a pear as an enema.

You can also use a basic hair dryer with a narrow nozzle.

Important! Be careful, don’t splutter and don’t damage anything on the board during the cleaning and installation process!

Replacing thermal paste

If the computer operates without changing the processor for more than a few hours, then you will need to replace the thermal paste. This is a knitted gasket between the processor cover and the radiator. The addition of thermal paste is an effective transfer of processor heat to the radiator-cooler.

For this you need some thermal paste or some more. The best brother is ALSIL-3, TITAN-silver, or you can find it cheaper on ebay - HY510. The price of food is 3-4 dollars per syringe with a capacity of 3-5 grams. These quantities are enough oil for 5, no less. At the same time, you can replace the thermal paste on the video card, although this procedure is much more complicated than the processor.

I would like to go on the Internet about the topic “don’t buy KPT-8 - it was junk before”, but that’s not entirely true. The price is around 110-140 rubles per syringe. Vaughn, of course, prefers current analogues, but the difference is observed at 2-4 degrees Celsius (and, perhaps, due to lack of durability - they will wear out for a while, and then have to wash it again).

Next, you need to remove the radiator from the central processor, wipe off the old thermal paste from it (with cotton wool), apply a new one and install the radiator back. The processor itself is not very flexible. How to avoid being amazed at the video:

How to avoid processor overheating on a laptop?

Cleaning before sawing

All parts of laptops are more complex, so for complete cleaning they need to be opened (resealed). One of the applications can be seen in the video below.

And here is an instruction for home-gifts, just to respect it - it works, although not in 100% of cases:

1. We turn on the laptop and open it (or not close it).
2. There is an opening for ventilation. As a rule, it is cut from the left side.
3. We are gaining more strength in your legion and blowing even more sharply into the new one. Well, well, blow with your mouth! You can also get dirty with a vacuum cleaner, using a vacuum attachment (you will hear the flow of wind and beat it with the strongest)
4. Once you have started to blow, then do everything correctly and blow until you get tired - you need to blow it out like a trace. If there is no saw, then either the laptop is clean, or it needs to go into another opening.

Opening the laptop: cleaning the saw and replacing thermal paste

Every laptop opens differently, but sometimes it’s still the same. Regardless of the laptop's insurance, it can be easily cleaned. Therefore, it has such a cover that it is easy to remove (by unscrewing a bunch of screws) and after removing it you will have access to the fan (cooler) of the processor.

Tobto. To clean the laptop and change the thermal paste, you need to remove the cover and clean everything. An example of how to hesitate to marvel at the video below. For other laptop models, everything is done in the same way.

Thermal paste

A laptop requires better thermal paste. I would recommend "Ice Therm-2", "Arctic Cooling MX-4", "Arctic Cooling MX-3", "Arctic Cooling MX-2". KPT-8? She's become morally outdated, but she's working hard. It’s far from the best option, but through marriage there’s nothing to be gained from it, and that’s it.

Problem 2. The operating system has been detected

Why the hell do you have a problem? When you use your computer every day, a lot of our actions are saved on disk, in system files, etc. For example, we went to the site, pictures, data cookies from this site were saved in timely files. The same can be said about Word or about a lot of other programs - they all save it somewhere, for whatever hour. Do you like the program? Hundreds of files have been erased and re-written from the disk - and not all of them are correct. Remnants and smears will accumulate, like at the original drain pipe. And the axis through several rocks of a vikoristan computer such time-hour analogies will reappear (or the consequences become critically rich), and it becomes difficult to work with the system - a complete mess.

Cleaning the operating system

1. Agnitum, Russia
2. Avast Software, Czech Republic
3. AVG Technologies, Czech Republic
4. Avira, Nimechchina
5. BitDefender, Romania
6. Doctor Web, Russia
7. Emsisoft, Austria
8. Eset, Slovakia
9. F-Secure, Finland
10. Kaspersky Lab, Russia
11. McAfee, USA
12. Microsoft, USA
13. Panda Security, Spain
14. Check Point, Israel
15. Comodo, USA

1. Avast Free Antivirus - no cost
2. 360 Total Security - cat-free
3. Panda Antivirus Pro - paid
4. AVG Anti-Virus Free - no cost
5. ESET NOD32 Smart Security - paid
6. uphill

   Problem 6. Software for the driver

   This point is most relevant for laptops Samsung, Asus, Acer, Lenovo.

   There are programs on your computer that were installed not by you, but by the manufacturer or by the person who installed the OS (operating system). There are often a lot of such programs and often there is no need for a stink! All of them are launched at the hour when the system starts and work first, which is how to troubleshoot the computer’s work. There are all sorts of things: YAC, regoptimizer, Amigo, etc.

   Problem 7. Problems with the hard drive

   This topic is very important and deserves a full article, but here we will talk about it very briefly.

   The problems here are divided into 2 types:

   Just problems

   Such problems are not necessarily accompanied by the symptoms described below if the disk is “dying.” In addition, you will notice a warning when opening folders, which may often cause the system to freeze. This is always a symptom of a fatal disk failure and this inode can be removed.

   Such problems may appear like this:

   • Go to “My Computer” and point the bear at the disk:
   • Press the right mouse button > Power > Service > Check.
   • Wait until the computer is restarted and during the restart process, check the disk for errors. Payments will be automatically corrected. This process is not quick and takes 0.5 to 5 years.

   The hard disk is dying

   This point applies until that critical moment when your hard drive fails and gradually dies. It’s possible to earn money, but it’s too time-consuming and unreliable. The simplest and most common recipe for this is to copy the data to a working disk and replace the non-working one.

   Symptoms of a serious disk failure and when it needs to be replaced:

   1. Periodically the system freezes, which is also called “dead hung”. However, the system simply stops and does absolutely nothing: neither Ctrl+Shift+Esc, nor Ctrl+Alt+Del. The best way to check whether the system has fallen asleep is to press the Caps Lock key and look at the lights on the keyboard, as they do not respond, then the “reset” button is here only no way to forcibly reset the system .
   2. Clattering, loud noises, creaks, jingling, clinking"harda". If the hard drive is in good condition, it may make a little noise, but not squeal or rumble.
   3. Severe disk overheating. In a normal situation, the hard part is either slightly warm or warm, as you are copying from something else, but not hot at all. If the case is hot, it is serious and the hard disk is more susceptible to any malfunctions. The problem can be caused by the installation of an additional cooling system (fan). But everything is still happening, because overheating is a clear sign of a serious malfunction here in the middle of the disk.

   IMPORTANT! If you are aware of the symptoms described above, immediately copy all files to a working hard drive so that you can spend the data at any moment.

   IMPORTANT! Don’t try to open and clean the hard drive - it’s just a mess on the right, because in 99% of cases nothing can be done, especially without special skills and special minds.

Instructions

Disk cleanup. Cleaning the system by "smittya". We launch the standard cleaning program.
For Windows 7: "Start -> All Programs -> Accessories -> Services -> Disk Cleanup" (right click ->
For Windows XP: "Start -> All Programs -> Accessories -> Services -> Disk Cleanup"
If you have a number of hard drives installed on your computer (or one partitioned per number of logical ones), then it will eventually appear that some of these drives are being cleaned. Select the required system disk on which WINDOWS is installed. (Then it’s easier to carry out this procedure with all the computer disks).
Check the boxes for all the items listed at the end, click “OK” and check. It is possible to check for a long time, due to the “observation” of the system

Now let's check the computer's hard drive for errors and failures. First close all running programs and remove all external media (flash drives, hard drives, etc.). For Windows XP and Windows 7, the procedure will be the same.
Open “My Computer” at the end of “Explorer”. By right-clicking on the system disk or partition of the disk, select “Power”. In the window, go to the “Service” tab, and there click on the “Finish verification” button. A small screen will appear at the end where you need to tick the 2 check boxes and press the “Start” button.
Please note that Windows cannot verify a disk that is being corrupted and is being created after re-installation. Click "Recheck Disk" for Windows 7 and "So" for Windows XP. Restore your computer. After restarting, it is planned to check the disk in text mode. Until it completes, the operating system will not start. The verification process will take a long time, so it’s best to run it at a time when you don’t need the computer (for example, don’t check it at all).

The next step will be defragmentation of the system disk. We launch a standard disk defragmentation program.
For Windows 7: "Start -> All programs -> Accessories -> Services -> Disk defragmentation" (right click -> "Run as administrator").
For Windows XP: "Start -> All Programs -> Accessories -> Services -> Disk Defragmentation"
In the window, select the disk on which the operating system is installed and click on the “Disk Defragmentation” button. (Then it’s easier to carry out this procedure with all the computer disks).

Now let's play around with the size of the swap file.
For Windows XP: "Right-click on My Computer -> Power -> Additional -> Shvidkodia -> Settings -> Additional -> Virtual Memory -> Change."
For Windows 7: "Right-click on "Computer" -> Power -> Additional parameters -> Widcode -> Options -> Additional -> Virtual memory -> Change."
In the window, select "Specify size" ("Special size" for XP)
Now the entire amount of your RAM is multiplied by 1.5 (if not, then by 2). The selected value is written to the fields "Output size" and "Maximum size"
(And because the computer has 4 gigabytes of RAM and Windows XP installed, you can set small values, for example 512 megabytes)

Let's turn on the services so don't get into trouble. "Start -> Control Panel -> Administration -> Services." This great list of all services includes the names and descriptions of all services. It seems that you can turn it on without harming the system. (Specifically, for the sake of completeness, these other services can be easily found on the Internet). The selection of services is canceled (double-click on the selected service “Startup type -> Disabled” and click on the “Stop” button)

Let's turn on elements of auto-engineering, so don't get into trouble. To get started, let's go to "Start -> All Programs -> Automatics" and you can see all the shortcuts that are not visible. Then we will launch the standard program for setting up system auto-enablement: “Start -> Vikonati” and write in the “msconfig” row, go to the “Auto-an-auto-annotation” tab and turn on all programs that are not being vikorized. (Specifically, for the sake of completeness of connection, you can easily find other programs in the auto-announced system on the Internet by entering the name of the programs in the sound system)

Let's see the visual effects.
For Windows XP: "Right-click on My Computer -> Power -> Added -> Widcode -> Options -> Visual Effects."
For Windows 7: "Right click on "Computer" -> Power -> Additional settings -> Widget -> Options -> Visual effects."
In the window that has opened, switch to the item "Secure the best speed code" -> OK

The devices are switched on so you don’t have to worry about it.
For Windows XP: "Right click on My Computer -> Power -> Accessories -> Device Manager."
For Windows 7: "Start -> Control Panel -> Hardware and Sound -> Device Manager"
In the window you can turn on devices that are not visible (right click on the selected item -> "Enable")
You can connect a camera, an interconnect card, an IEEE 1394 controller, COM and LPT ports, etc. Whenever devices are turned off, they can be “interrupted” if necessary.

Clean your computer from viruses with an antivirus using up-to-date antivirus databases. You can use both installed anti-virus programs and cost-free “one-time” scanners, such as CureIT from Dr. Web,

Because the PC is playing tricks, it leaves you with a maximum of incompetence, which manifests itself at an unexpected moment. This is due to the fact that preventive maintenance of the robotic machine is not regularly carried out both in the middle and above.

Reasons for the appearance of lags

There are a few reasons why the computer has become widely used:

You can figure it out like this:

• At the start, go to the Viconati row;
• enter "msconfig";
• In the bookmark, select the submenu - “automatic”;
• Uncheck all unnecessary processes (except ctfmon). After this, press “OK” and click on re-enablement;
• The reason for the contamination may also be the storage of information on the system drive C. The storage of the disk, which negatively affects its efficiency and speed;
• viruses. The biggest reason lies in the presence of the antivirus, or its passiveness;
• Finally, if you use a desktop PC, you need to clean the central system unit with a saw.

Programs for optimizing your computer

PZ for optimization, as they say in simple words - these are the assistants that you see on your computer.

CCleaner or Autologistic Bootspeed:

• simple in vikoristanny;
• frees up space on your hard drive;
• clean the registry;
• corrects obvious system problems;
• deletes files that are not vikorized.

There are 4 sections in total:

Why is this vikorystannya forgiven? For those who want to clean the cob, you can quickly use the “cleaning” parameter. You can set cleaning automatically by setting the hour and date in the settings. If you know which files can be deleted and which cannot, then go to the “registry” item.

Wise Care 365 and information about it:

Why Weiss Care 365 and its advantages:

• Weiss Care 365 allows you to manage your PC connections whenever you need it;
• help you grab a specific file or folder;
• If you run out of required material, you can use this additional program;
• Great choice for the interface, considering the possibility of the Russian choice.

Glary Utilities

The interface has a total of 3 sections:

1. a short look;
2. one click;
3. modules.

The first section has the following settings: “Autostart Manager” and “Deep Cleaning”. Another section includes “registry cleaner” and “uninstaller remover”.

In this manner, you can:

• speed up the robot system;
• save unnecessary material;
• keruvati avtozavantazhennyam;
• block the work of the bad guys;
• clean disks;
• update the system.

Ashampoo WinOptimizer

As with previous programs, Ashampoo clears the place, straightens the mess, and also increases productivity and preserves your privacy. The head, this security program takes only a little space, turns on a bunch of brown modules and starts up quickly.

Video: PC freezes

What a robiti, because the computer is very valuable

For this type of problem, it is necessary to carry out low-level entries in order to turn off the cause of the lags. And the reasons may be:

• cleaning using various cleaners to optimize the computer disk and cleaning manually. It is necessary to remove unnecessary audio and video files that have become stagnant;
• automatic acquisition of unnecessary files when turned on, if they need to be turned off;
• You rarely quit defragmentation, so you need to quit it at least once a month;
• uninstalled or not updated antivirus;
• reversal of disks, to solve the problem you can use CD/DVD or portable hard drives;
• If the “filling” of your filling is powdered, you can remove it with the help of a vacuum cleaner;
• A rare reinstallation of the system causes a “halcyonous” surge in the functioning of the PC.

We now know that if you put your computer away for a long time, remember, so that your machine starts working faster, you need to describe the reasons, otherwise you can simply reinstall the system or defragment the storage.

Cleaning before sawing

Rarely cleaning the equipment can lead to overheating of its components, causing the machine to begin to “stupid.” To know this, you need to take a close look at the inside of your PC.

How to carry out cleansing:

To monitor the processor temperature, you can use special utilities to help you figure it out. After cleaning, check the temperature if it has not changed, then replace the thermal paste between the processor and cooler.

Types of viruses

Most often, viruses themselves cause a decrease in productivity. And this poverty is an important step towards productive work. It is necessary to remove viruses using special utilities - antiviruses. Ideal program for this purpose Dr.Web Cureit.

Most cost-free products that have been reviewed over time, such as Microsoft Security Essentials and Comodo Internet Security, reduce the risk of being dissatisfied.

• insert її;
• remove viruses;
• Update your antivirus regularly.

RAM

For smooth operation of a PC, a sufficient amount of RAM is required. If there is a failure, the swap file is activated, where data is sent, which is not being processed at the moment, which leads to “galvanization”. To make your computer work faster, increase your RAM memory.

The paging file must be lost at some point in order to be able to write mini-memory dumps.

You can solve the problem like this:

• insert SSD disk;
• Use the flash drive as a cache in which the system will store data that is often corrupted (install it in the socket located at the back of the system unit, so you put it directly into the motherboard, and turn on additional data transfers). This technology is called Readyboost.

Download on HDD

More space on the hard drive is needed so that the system can be enchanted. I could lose as much as 5 gigabytes.

When you work from the HDD, the file is split into parts and quickly “scattered” into different parts, searching for elements that compose the PC. Defragmentation of a file finds all the details and saves them in one place.

For Vikonian defragmentation it is necessary:

1. close all programs;
2. go to “My Computer”;
3. press the mouse button to the right;
4. open “Vlastivosti”;
5. go to the “Service” tab;
6. Click the "Visit defragmentation" button.

After you open the “Disk Optimization” option, you may need to:

• press the "Analyze" button;
• After completing the analysis, click the Defragment/Optimize button;
• Defragmentation can also be achieved with the help of special utilities.

Video: cleaning your computer

Cleaning the registry

The registry is a kind of “shaf”, in which the information on the skin is contained: its operations, procedures and procedures. As a rule, after deleting unnecessary files, the information in the registry is lost. All bugs, file extensions, old versions of software, and old information about the activity of viruses are lost there.

You can clean the registry using special utilities; to disable this function itself, you will need to go to:

1. CCleaner
2. jw PowerTool
3. AusLogics BoostSpeed

These are programs with a Russian interface, as well as easy ones from Vikoristan.

Regularly check and watch your “glue”, and so that stains do not accumulate on both the parts and the system itself. Reinstall the system periodically.

One of the most urgent and perhaps eternal problems of all personal computers is what does the computer do? Even if you bought your brand new computer, you would use it without showing any signs of galma. There are so many reasons why your computer may freeze, and I’ll write about that today. And just like that, I’ll write methods for dealing with the most common problems.

• Detection of viruses on your PC
• Availability of free space on the system disk
• Overheating of computer components
• Hard drive problem
• Insufficient RAM capacity
• Autostart contains a bunch of unnecessary programs
• Register of re-renditions of "smittyam"
• The computer is busy working on the browser for an hour

In fact, there are reasons why your computer may be even more troublesome, since this is not necessary, I will write another part of the article. And now let’s look at the skin report from these points.

– Problem This is one of the main reasons why your computer becomes more productive. You don’t have to worry about the emergence of viruses on your computer until you first change your mind. such changes of mind can buti:

• Computer freezes
• Files and folders are not visible
• Notifications about amends have appeared
• As soon as the browser is running, intrusive advertisements appear
• It's time to turn off the computer and finally wake up
• Other programs cannot be launched and folders cannot be opened
• The task manager does not open (does not work with ctrl+alt+del)
• Processor speed up to 100% when programs are closed

At the first symptoms of a computer infection, there are a number of steps you can take to protect yourself from viruses:

– Decision If you assume that your computer is infected with viruses, check the following points:

Check it for viruses with a scanner such as Cureit in Dr.Web and don’t forget that you need to check the current version of Cureit. After scanning with a scanner, it will show that there is a bad software and scanners on your computer that are acceptable/readable after installing the stationary version of the antivirus. I can please Avast to get a good and cost-free antivirus.

Enable a firewall (firewall) in the operating system and configure it to work with all the necessary programs that allow access to the Internet. Connecting to an antivirus and firewall will provide strong protection against most threats.

Another very important joy! Most viruses and Trojans can be found on porn sites. So, if you visit such sites for any reason, be careful not to click on all your windows after they appear. For example, the proposal to update a flash player will lead to the installation of useless programs.

– Problem This is a very common situation when the system disk of your computer (drive C:\) is full, and when you try to save the required record, the system checks the available memory on the hard drive.

The problem is relevant for these computers, which have a system disk and a disk with data partitioning (on disk C and D, for example). In my experience, I often encountered a situation where the system disk had too little hard disk memory allocated and the world was full (installing updates, installing programs, time files), the space on drive C dropped to zero.

– Virus To resolve the problem with the volume of the system disk, follow these steps:

• Clean the disk for timely files. CCleaner handles these tasks well
• Vidality programs that you don’t benefit from
• Clean the desktop (most people don’t suspect that the desktop saves information on drive C)
• Clean the file (this is the case if the size of the file is up to 10 GB, while the size of disk C is 50 GB.)

– Problem Unfortunately, this is a very common and very dangerous problem for your computer. Follow the temperature of the components! More importantly, the computer is a repository for important information. I think you will not be happy if your computer goes out of order through overheating and eventually goes out of order and you will waste all the information from your PC.

How do you mean that the computer is suffering from overheating? Really simple! If when the computer is turned on, everything is fine and starts up quickly, but when you start a program or game, the computer starts to behave and restart, then in 95% of cases, the problem is overheating

– We decided to pay attention to the temperature of the processor, chipset, video card and hard drive. You can monitor the temperature of components using additional special programs (for example, Aida or Everest).

Periodically clean the system unit and saw. So, you need to clean it! In my memory, such copies were burned, in some cases, such that the color of the motherboard was not visible, the thread of the processor radiator was not visible through a sharp “pick” saw. The heat causes the coolers (fans) to go out of order, as a result of which heat exchange is disrupted and the temperature rises.

It is necessary to periodically check the thermal paste between the active elements and their radiators. Raju robiti once for 2-3 days. If the sensors show that the temperature of your elements (processor, chipset, video card) is normal, then the heat exchange is all the same, there is no need to change the thermal paste.

– Problem Few people know that hard disks have the power to drain their resources. We are not talking about the size of the disk (I wrote about this earlier), but about the life cycle itself, which, unfortunately, is not as great as we would like.

The operating system and program speed is 70% contained in the hard drive. I myself had no idea how I could fix a computer that had 4 GB. RAM, 2-core processor 3.2 GHz, good video card? And when working, there is a noticeable sutteva subgalmic treatment. Only by replacing the hard drive will there be a significant increase in the speed of the work.

On the right is that the hard drive consists of many balls of mirror drives, all of which are divided into sectors. Since the hard disk controller does not remove the output when the hard disk sector is converted to a single sector, this sector is designated as “beaten”. The more bad sectors there are, the closer the end of your hard drive is.

- Decision It’s a pity that it won’t last forever! After all, life can be continued! Same with hard drives. If you follow the rules described below, you can safely continue to live the life of your hard drive, and therefore your computer.

• Defragment your disks periodically (at least once a month)
• If you suspect the hard drive is working, carry out a series of rounds to check and update the hard drive (good tools are available on HirensBootCd)
• Place any physical activity on your hard drive. Do not hit the system unit, do not hit the table if the system unit or laptop is standing on anything
• When cleaning the system unit with a saw, be sure to clean the hard drive carefully, as the shards may heat up.

– Problem One of the most common reasons why I feel like my computer is very lame is the small amount of RAM. Progress does not stand still and new software solutions will come out that will ensure comfortable operation of these programs.

You can increase the availability of RAM in the task manager (ctrl+alt+del), in the “Widden Code” and “Processes” tabs

However, not everyone can afford to update the “leakage” of their RAM. However, to find out the memory for the old computer (DDR), you will have to try. The same price for old memory sticks is significantly more expensive than for memory of the same type, or a new type (for example, DDR2 or DDR3).

And in order to install the memory of a new modification, you need to change the motherboard and, in most cases, the processor.

- The decision is the most banal! Increase your RAM capacity. Also, the Raj will appreciate the running processes, it is possible that a large part of the memory is “seen” by processes that you did not run (for example, a virus).

- Problem Just like RAM, the processor greatly affects the speed of the computer. The greatest disadvantage of the processor is noticeable when working with a browser and launching clear HD video.

The processor level can be checked in the task manager (ctrl+alt+del), in the "Widden Code" and "Processes" tabs

– The decision The decision is to install a new, tougher processor.

– Problem Whenever you work on a computer, you often have to install a variety of programs, some of which are installed in the auto-enabled system so that they can be activated when the computer is turned on.

I doubt that you often look at the auto-announcement and remove unnecessary programs. And if you clean the car, you can significantly increase the speed of running your computer and starting the operating system.

– Resolution You need to open “System Configuration” and uncheck unnecessary programs in the “Automatography” tab.

To open "System Configuration", click "Start" - "Windows", for Windows XP, or for Windows 7, "Start" - and in the "Find programs and files" row write msconfig then press Enter.
After that, go to the “Auto Vantage” tab
In my dropdown you can safely enable the items Intel, Adobe Reader, Java. You can have an office, Winamp, and all sorts of messengers there.

– The Registry problem is the biggest mystery and little understood by most computer users, an area of ​​the Windows operating system. The registry specifies the parameters of all add-ons that are installed. If a program is installed incorrectly, entries in the registry will be lost.

Over the years, through such entries, the register grows to obscene proportions. And when the operation is completed before, the system spends more than an hour, which is not what we would like.

– The solution to cleaning the registry with a special utility, such as CCleaner, is that there are no other options.

– The Tej problem is a very pressing problem. It occurs mainly when dozens of tabs are opened or HD video is launched in the browser.

Also, don’t forget that when the tab is open, there is a process running that “eats” part of the RAM and part of the processor.

– Decision If the computer freezes while working in the browser, pay attention to the task manager, which process itself takes up the most resources. It is possible that the program was launched in the web page, or the script that was submitted. Don't forget that browser freezes can also crash through the re-cache, which needs to be cleared periodically.

If your computer crashes when watching videos on the Internet, the problem is insufficient processor resources, which can only be helped by replacement.

Let's bring the pouches!

As you can see, there are a large number of problems that can cause problems with your computer. If you don’t know the answer to your problem, or you’ve tried everything, but nothing helps, write your problem in the comments, and we will try to help you. Before we speak, please speed up your PC

And now I want you to watch the video on the topic “What to do, because the computer is galling”:

And that's all Hello! Today we’ll talk about those who can use a computer. As you have marked a great job or interest in your PC. Well, your system feels like a hand-off. Most prosperous people don’t know how to navigate the system. Therefore, it is most often time-consuming to reinstall the operating system. This is not always easy, because over time, each of us accumulates information on the computer. We install a lot of different programs, and we simply customize the computer for our needs. And after reinstallation, everything will have to work again, and an hour was spent on reinstalling the operating system and setting up the PC.

Until then, we may or may not be able to help, everything depends on the reason why the problems started. It’s better to try to see how useful your computer is without going through the trouble of reinstalling it.

And that's it, you noted that the computer started galling. It gets very addicted and starts various programs for a long time, and sometimes freezes. There are a number of simple methods that can help you achieve efficiency.

Three simple ways to speed up your computer

Perche What you need to do, since the computer is very faulty, is to check the hard drive for defects and bad sectors. To do this, go to My Computer, click on the hard drive with the right button and press Power.

From the menu, select the service tab and click on checkout. In the next menu, you need to check the boxes Automatically correct system errors and Check and update bad sectors and press Start. Please let me know who you are.

We are pressing to check the disk and restart the computer. During the process of restarting the operating system, the hard drive will be checked for errors and automatically corrected. You can spend a lot of time on the hard drive. Very often the computer itself suffers from problems with the hard drive.

Friend After your hard drive has been checked and the computer has shut down, you need to stop disk defragmentation. Defragmentation helps a lot. There will be scattered files on your hard drive. It is recommended to run defragmentation at least once a month. If you don't bother, the computer can be very annoying. For this, we also go to My Computer, right-click on the hard drive and select Power. Go to the Service tab and click on Viconti defragmentation.

At the window that appears, Disk Defragmentation is pressed and the process is completed. If you would like to learn more about those who can interfere with your computer and hang up through it, and so on.

Third What you can do is clean the registry and remove any bugs. Problems with the computer can also arise from those in the system where there are too many unnecessary files in the system; you won’t be able to clean the computer through this, otherwise your negative impact on the work will be caused by these files.

For this purpose, use the cost-free CCleaner utility. . After you have downloaded and installed the program, we launch it. Click on the Cleaning tab and click on the Analysis button below. After completing the analysis, you will see a list of unnecessary files and the amount of files that need to be cleaned.

Now let's go to the Registry tab. Here we are still pressed to look for problems and a list of problems and then pressed to correct them.

CCleaner instructs you to create a backup copy of the registry, which is marked as indicating where the backup copy will be saved. Finally, you can correct problems one by one, but if you have accumulated a lot of them, then click Viparate.

Fourth What you need to do is create an anti-virus database and scan your computer for viruses. If you have Nod32, then you can update the server.

Using these standard methods you can update the system. This method will help you if there are no problems on the hardware level and the computer will not be installed in the desktop. After all the guesswork, the computer continues to work as much as possible. This means you have serious problems and need to try restoring the system.