Hdd gude. What's wrong with making noise and cracking on the hard drive? Why crack your computer's hard drive?

Typical food

Good afternoon.

Having recently bought a laptop and just an hour later noticing that if I acquire some kind of file, I turn on the laptop, and copying information from disk to disk - the disk begins to crack. The sound is not strong, but rather unpleasant.

At the store they said that everything was fine with the disc, so it may be, but there was no doubt in their hearts.

If you knew that this model was so loud, I would have switched to a different one... Can you suggest what can be done to change the noise when playing on a disk?

Good afternoon.

I'm trying to make a fortune teller. A hard disk drive (HDD) is a mechanical device, and during operation, any HDD makes noise. True, in one disc it is easy to catch and practically inaudible, but in another – it can be a little wasted. In addition, in addition to the “operating” noise (which is caused by the noise), a third-party one may appear (which indicates a problem): knocking, strong grinding, clicking, etc.

I would like to pay special attention to the noise from the disk during these situations, if:

1. when the old disk started making noise who previously worked without noise (this is an alarming symptom - immediately get all important files from the disk);
2. a noise appeared in sight: knocking, strong clattering, creaking, etc. (this all indicates a mechanical problem);
3. As soon as the crack appears, the computer begins to freeze, Windows does not respond to your pressure;
4. From time to time, your files cannot be opened or read, causing the disk to make noise.

All overhauled symptoms most often indicate possible hardware problems with the disk (in most failures), and without replacing it with a new disk, the insertion noise will not go away. Therefore, I recommend that after backup, look at the SMART readings, check the disk for bad blocks, etc. There is one small instruction about checking the disk on my computer, posted below.

How to check your hard drive for bad sectors (bad blocks). How to use the Victoria program on DOS and Windows -

Why is your new disk making noise? - then everything is most clear with him, and there is no work noise (even though the gateway or exiting the new disk doesn’t turn anyone off). Most often, the problem is that if the buyer bought a disk (laptop, computer) - then in the store (where there is a lot of third-party noise, the music is playing too) he simply does not pay attention to the noise of the disk (and in the store, the disk, as a rule, I don’t insist too much). And in the booth, in the quiet of the night - having assessed all the characteristics of your device.

If the computer fragments are a technically foldable product, then you can simply exchange it in the store for another one (as you can do with other products). In many cases, you may be vindicated (there may be a greater reason, for example, malfunction). Further, I will give recommendations on how to eliminate such “working” noise.

Additional!

Buying a new HDD: appreciate that the characteristics of the device will always show the same level of disk noise. This parameter is expressed in dB.

It is clear that the lower the disk, the quieter it is. Level plate (to understand how and what) With equal noise, the noise is lower.

I'll help you!

How to select a hard drive (HDD): 6 steps to improve your productivity

1) Replace your old HDD with an SSD disk (or another HDD)

Persha Porada is associated with material costs. Ideally, to completely eliminate the noise, you need to change the disk. SSD drives are rapidly gaining popularity - they do not have the same mechanics as HDDs, and therefore, when in operation, they are a priori silent (completely silent!).

Besides, they still have a lot of advantages:

1. Many times the speed of work is greater (that’s a big advantage!), so your programs, games, Windows are much more attractive;
2. enjoy less energy (for example, a laptop will last 10-15% longer without charging);
3. not be so afraid of shaking and vibration (again a plus for laptops);
4. the stink doesn't stink like a HDD.

Well, it’s true that there’s one drawback to the discs: higher speed. Then it will pay off in spades! You can find out the difference in speed between SSD and HDD drives from one of my articles posted below.

How to check disk speed: HDD, SSD. Test, significant differences in speed between SSD and HDD, and then switch to a solid-state drive -

2) Check that there are no programs that will load the disk up to 100%!

If the disk doesn’t bother you with noise all the time, but especially in moments of strong fascination (you can see this, for example, the LED indicator of the hard disk’s operation) - then try to find out what kind of accessory fascinates you, and then turn it on.

Very often the disk can be stolen by programs that you don’t need. For example, if you are addicted to Windows, uTorrent is addicted to tens of hundreds of torrents: while they are being verified, you can go through 5-10 minutes! And all this hour the disk will be haunted.

The simplest and most effective way to find out about programs that are using up the disk is to open the task manager (for Windows 8, 10) and open the resource monitor (for Windows 7). Once you recognize a program that is actively working on the disk, try closing it.

Contact us Wiklikati dispatcher zavdan- press the keys Ctrl+Shift+Esc.

For Windows 8, 10 – open the tab "Productivity" And marvel that the disk is not encroached. If you are attracted, then the deposit "Protsesi" You can find the program (which is what you want), then close it.

Windows 8-10 – productivity (disk utilization 0%)

In Windows 7, the Task Manager requires you to open the tab "Shvidkodia" , then press the button "Resource Monitor" .

In the resource monitor, open the tab "Disk": to increase respect among divisions "Processes with disk activity" і "Disk Robot" .

3) Change the positioning speed of the block with heads (Automatic Acoustic Management)

Hard drives have a number of options that you won’t be able to guess anywhere (we’re talking about Automatic Acoustic Management, which is often written briefly A.A.M.). This option allows you to change the speed of movement of the heads, and this, in its turn, has a positive effect on the level of noise (however, in addition, the speed of the disk operation also changes, but it’s a big deal).

You can change the settings using special utilities, I recommend the following: quietHDD, HDDScan. I'll look at the work in both utilities.

quietHDD

A very small utility designed to change the acoustic noise of the AAM and APM energy saving mode of the hard drive. It’s easy to work with her and smoothly, the butt is lower:

A richly functional program for robots with SSD and HDD drives. Allow you to look at SMART, check the disk for bad sectors, determine the operating temperature of the noses, detect acoustic noise, energy, etc.

In our case, you need to launch the program, then select the hard drive (as you have one on your system), and open the “Features/IDE Features” option.

HDDScan - IDE Features

Far from the section Automatic Acoustic Management- Set the values ​​between 128 and 254 (before speech, the program recommends 254, but it is far from optimal). By default, for minimal noise level - set the value to 128 and press the button SET(Install). In this way, you can adjust and find your optimal option.

Note: Please note that not all savers support this option. In some cases, HDDScan will not allow you to change the value in Automatic Acoustic Management.

Automatic Acoustic Management

4) Securely secure the disk to the block, turn off the vibrations, install the pads

It’s good to get to your basic PC, since you have a laptop - then your hard drive is securely and firmly fixed to the case by the printer (and you can’t read this).

5) Check for breakdowns and carry out defragmentation

Well, the last thing you want to please is to check for damages and stop disk defragmentation. Crackling - this, of course, cannot be changed directly, but will make your disk more sensitive, the fluidity of the robot will move (which is positive, even though it’s not bad, it will be equal to noise).

To check the disk for repairs and stop defragmentation, open "My computer" ("Tsey computer", "Computer" - Depends on Windows version) . Then select the required disk and open it power(Div. screen below).

Before speaking, defragmentation and disk cleanup can be done in auto mode, for which there are special utilities. Posted on my recommended diva utility. lower.

I'll help you!

The best programs for optimizing Windows -

Some PC users may encounter the problem of external noise coming from the hard drive process. The Winchester is a mechanical structure, in the middle of which there are rotating disks that wrap around. Reading information from the hard drive uses magnetic heads, which move and create noise. A variety of third-party sounds can be found in the hard drive model and in the system unit case. Since the computer case is made from inexpensive materials and the middle is poorly constructed, then unpleasant sounds will be heard throughout the entire system unit.

The hard drive saves all information on the computer. Therefore, you need to make sure to save your data as soon as you notice noise in the robotic process. The last “tinkle” is about those who can get angry without a bar.

Sometimes a simple working mill can be noisy. Here you need to figure out why you should crack your hard drive.

1. Replace the hard drive.
2. Modify the acoustic system with the additional AAM option.
3. Try to soundproof the building or buy acid.
4. Secure the hard drive with soundproofing pads.
5. Stop disk defragmentation.

Most likely, there is another version of the problem. Let's take a look at what's in it.

Change in noise from the hard drive using additional AAM

Every HDD has the powerful function of regulating the noise that is generated using the built-in Automatic Acoustic Management (AAM) option. Our goal is to ensure that by changing the fluidity of the heads, the noise of the device is reduced. But there is one negative factor here: if you leave this option, the performance of the hard drive will automatically decrease.

Which of these two options (smoothness or noise) creates more problems, which is worth giving your advantage is up to you. You may not notice a decrease in the fluidity of the hard drive, but the noise level will noticeably change. If you still want to fix the noise problem with AAM wikis, you need to use the WinAAM program. It’s more accessible to attraction, and it’s absolutely cost-free. Volodya uses a Russian interface and operates without a mandatory installation. You can get this program by following the instructions: http://www.withopf.com/tools/aam/winaam-292.zip.

On the window that appears, click “Continue”. Correction of security adjustments is absolutely effective while reducing the noise of the hard drive, and better yet, don’t bother.

In the first row you can read that at this time the noise regulation is not active. Click on the option “Silent/Standard (128)” to adjust the silent AAM level. Its value can range from 0 to 255. It means that the flowing sounds include the extreme levels, either quietly or loudly. Most Winchesters do not lose their respects on other levels. This, above all, is the reason why the WinAAM program allows you to solve the problem with noise by clicking on one option.

After adjusting the noise level, the program will close. Open it again, select “Continue”, then “Review”.

It appears at the end that it shows that the head is not in order, which is what it reads.

At this point, you can almost see the process of working with the hard drive with the updated AAM option. The store is magnificent. To align with the front mill of the Winchester, press the parameter “Hook (254)”. This is to speed up the work of the hard drive and turn the front noise down.

Mechanical methods for reducing HDD noise

If you don't get any noise from using additional programs to get rid of the noise, you need to fix the problem manually.

1. Now turn over the hard disk locking mechanism. The Winchester must be firmly fixed and firmly pressed on the grooves; all bolts must be tightened.
2. Look at how the HDD parts mechanically fit into the computer case. It is necessary to install special gaskets on the sticks for the insulation function. You can push the hard drive's mounting bracket a little so that the part does not stick into the computer case. These actions can help reduce noise.
3. If it is possible to change the rotation of the hard drive, try it. It is necessary to ensure that the vibration of the hard drive does not transfer to the case.

Since it was not possible to change the noise, turn to the service of technical support.

A hard drive is a key component of a computer where information is stored. At the same time, more and more computers are moving from HDDs to swollen SSDs, but their capacity still does not allow all the necessary information to be stored on solid-state drives.

Why are hard drives making noise?

It is generally accepted that the most important component of a desktop computer or laptop is the cooler. However, since the refrigeration system is well thought out, the operation of the coolers may not be practical.

Let's step behind the noise, which seems to be an element of the system unit - the hard drive. During the robotic process, the mechanical heads in the middle of the device collapse, which read information from magnetic disks, causing noise. Sometimes the hard drive begins to crackle and the desktop makes a lot of noise, which causes discomfort when working at the computer.

The level of hard drive noise depends on a variety of factors: the speed of the robot, the age and frame, the materials of the case and the folding capacity, as well as many others. Apparently, you can see software and hardware methods to reduce the noise of the hard drive during operation.

How to change the hardware noise of a hard disk during operation

Consider that the older hard drive makes more noise. This is due to the wear and tear of his elements, and there is a strong clamor from the hoarder to talk about his quick exit out of trouble. However, if there are no plans to replace the hard drive, you can remove it from vibration insulation in the computer case. There are two options for how to earn money:

Another option for solving the problem of noisy computer components is to replace the case with an option that provides good sound insulation.

How to programmatically change the noise of a hard disk during operation

If your hard drive starts to crack, squeak, or knock during operation, you can try to fix it programmatically. As it turns out, during the operation of the hard disk, the mechanical heads in the middle collapse as they search for information on the magnetic disks. Apparently, you can change the noise from your roar in two ways:

Important: Please note that the reduction in the noise of the hard drive is transmitted by a change in the speed of movement of the head, apparently, a decrease in the speed of the storage robot. However, in the primary positions of a koristuvach, such a reduction is practically impossible.

As the hour progressed, a lot of people working at their computers started making noise. It can be used as a cooler, video card, or hard drive. However, the noise from the hard drive differs from other sounds that come from the system unit or the lower part of the laptop. The noise of the hard drive is more likely to be a cracking sound. This appears if you copy files of large sizes or play from the game. As long as your PC was working stably and there were no external noises, you should now crack your hard drive, copy all the important information from it and check it.

Reducing hard drive chatter

If you have a cracked hard drive, there are two ways to fix this problem:

• Reduced fluidity of positioning heads (shards of stink and crackling);
• Reliable fixation of the hard drive in the middle of the system unit.

The hard drive has this option as Automatic Acoustic Management. It speaks for the smoothness of the wrapping of the magnetic heads of the Winchester. It is not possible to change these settings or reduce the speed at which data is read by default settings. A special program is required. You can find plenty of them on the Internet. QuietHDD software is gaining popularity. However, be warned that by reducing the speed of head wrapping, the speed of reading information decreases. The disk begins to work harder. This is a negative factor. Here you have to choose: speed or a working hard drive.

We remove the crackle of the hard drive with the help of quietHDD in an easy way. It is important to launch the utility as Administrator.

Open the “AAM Customization” tab. We move the steps at a minimum speed, reducing them from 256 to 128 revolutions. Then click “Accept” and “Ok”.

Before launching the program, do not launch this utility immediately, but add it to the auto-enabled system.

If you are the owner of a PC and not a laptop, the hard drive should be securely secured in the system unit. This can be done in three ways:

1. Fastened with bolts. Most often, the hard drive is secured with just two bolts, even if there are more sockets. In a “sled,” the disk “feels” itself and through it creates a crackling noise. Make sure to stretch the device and firmly secure the hard drive to all the bolts.

1. Vikoristannya of gaskets. Soft rubberized gaskets dampen noise and vibration. They can be purchased or verified independently and installed in a separate disk space from the system unit. However, the material must not be too large so as not to interfere with the ventilation of the disk.

1. Attachment to the additional torsion of the bet. For this purpose, use 3-4 small pieces of wood and fasten them in the same way as a disc was rotated in a sled. However, moving the body this way will be difficult. I’ll install a rizik poshkodzhennya.

Using these other methods, you can secure the hard drive so that there is no noise or cracking.

According to the statistics, after about 6 cycles, another HDD stops working, but practice shows that even after 2-3 cycles, malfunctions can appear in the operation of the hard disk. One of the most widespread problems is the situation when the accumulation of electricity starts to crack or squeak. Apparently this was noticed only once, after making previous visits, in order to protect against possible loss of data.

A good hard drive shouldn't have any unnecessary third-party sounds during operation. You see a singing noise, which is guessed by the humming sound when records of reading information are created. For example, when there are encrypted files, background robot programs, updates, launching games, add-ons, etc. There are no knocks, clicks, squeaks or pops.

Since the koristuvach guards against the powerless sounds of the hard drive, it is important to explain the reason for the guilt.

Checking the hard drive

Often, a user who launches the HDD diagnostic utility may hear a slight clicking noise as if it were a device. It’s safe, the fragments of accumulated people in this manner can simply be referred to as the so-called bit sectors.

If there is no clicking sound and no other sounds, the operating system is working stably and the HDD itself has not lost fluidity, then there are no drives to worry about.

Switch to energy saving mode

If you turned on the power saving mode, and when the system switches on, you can still hear the clicking sound of the hard drive, but this is normal. When the connection is turned on, the clicking sound will no longer appear.

Power outages

Power surges can also cause the hard drive to click, and if problems are not avoided at the right time, it means that everything is accumulated. For laptop users, when the battery is running for an hour, various non-standard HDD sounds may occur. If the clicking sound disappears when the laptop is connected, then the battery may be faulty and should be replaced with a new one.

Overheating

Some drives may cause the hard drive to overheat, which will result in a variety of unusual sounds, as you can see. How can you tell if the disk is overheating? Please note that it will be activated when it is activated, for example, before the hour of recording to the HDD.

And here it is necessary to measure the temperature of the accumulator. You can use the additional software HWMonitor or AIDA64.

Other signs of overheating include frozen programs or the entire OS, a crash, or the PC not being connected.

Let's look at the main reasons for elevated HDD temperatures and ways to correct them:

Damage to servo settings

At the generation stage, servo marks, necessary synchronization of disk wrapping, and correct positioning of heads are recorded on the HDD. The servos are alternating, starting at the center of the disk itself and extending one way at a time. The skin with such icons saves its number, its place in the synchronization zone and other information. This is necessary for stable disc wrapping and precise designation of certain areas.

Servo marking is a collection of servo marks, and if it is damaged, the HDD area cannot be read. Devices that need to capture information, and this process is accompanied not only by troublesome hiccups in the system, but also by a loud knocking sound. The disk head knocks on this hole, as it is about to explode until the servo is damaged.

This is a very serious and serious failure, in which case the HDD can be repaired, but not 100%. You can correct the error only with the help of a server writer, or a low-level format. Unfortunately, there are no useful programs for which you can use the correct “low level format”. If such a utility can create the appearance of a low-root format. On the right, the formatting itself at low level is carried out with a special device (servowriter) to apply servo markings. As you already understand, the same program cannot remove that very function.

Cable deformation or faulty connector

In some situations, the clatter may be caused by the cable through which the device is connected. Check your physical integrity - there are no broken faults, or the plugs are easily rubbed. If possible, replace the cable with a new one and turn over the robot.

Also look at the roses for evidence of saw and smittya. If possible, connect the hard drive cable to another connector on the motherboard.

Incorrect hard drive position

Sometimes the problem lies in the incorrect installation of the disk. It must be very tightly bolted and rotated, including horizontally. If you place the device under it or do not secure it, the head may get hot and make clicking sounds during operation.

Before speaking, as if there are discs, it is best to fasten them against each other. This will help them cool down faster and reduce the possible appearance of sounds.

Physical failure

The hard drive is a very sensitive device, and is afraid of any spills, impacts, strong shocks, or vibrations. There is a particular problem with the use of laptops - mobile computers, due to the carelessness of homeowners, most often stationary ones fall, hit, experience strong vibrations, shaking and other unpleasant minds. Apparently this can lead to the breakdown of the storage unit. If disk heads break, your upgrade may need to be repaired by a specialist.

The original HDD may fail because it does not recognize the necessary manipulations. Place the saw particles in the middle and place them under the head, so you may hear a squeak or other sounds.

The problem can be determined by the nature of the sounds heard by the hard drive. Of course, this does not replace a qualified examination and diagnosis, but it may be worthwhile:

• The HDD head is damaged - you can see a clicking sound, after some devices it starts to work harder. Also, with singing periodicity, sounds can occur continuously;
• Faulty spindle - the disk starts to start, but as a result the process is interrupted;
• There may be bad sectors on the disk that are unreadable (physically, but cannot be removed using software methods).

Why bother, since the clicking doesn’t work, put it in on your own

In a number of cases of breast cancer, it is impossible not only to make a clicking sound, but also to diagnose its cause. There are only two options for how to do this:

1. Purchase of a new HDD. If the problem hard drive is still working, you can try cloning the system with all the files from the user. Essentially, you only replace the device itself, and all your files and OS will continue to function as before.

   Since there is no such possibility yet, you may want to save your important data on other information storage devices: USB-flash, evil spirits, external HDD, etc.

2. Upgraded to a specialist. Repairing physically damaged hard drives is very expensive and completely inconceivable. Especially when it comes to standard hard drives (installed in the PC at the time of purchase) or those purchased independently for little money.

   However, if there is very important information on the disk, you can remove it and copy it to a new HDD. If there is a clear problem with clicking and other sounds, it is recommended to contact professionals who can update data, software and hardware systems. Independent actions can only aggravate the situation and lead to repeated loss of files and documents.

We have identified the main problems through which hard drives can click. In practice, everything is completely individual, and your vehicle may have a non-standard problem, for example, an engine that has jammed.

Finding out on your own what the clanging screamed may not be easy. Since you do not have sufficient knowledge and information, we would like to turn to the fakers or install a new hard drive yourself.