Do-it-yourself flash drive: life hack for making a stylish case for a USB storage device. How to create a beautiful flash drive: step-by-step instructions for a safe, simple and quick creation Multiboot flash drive Self-propelled flash drive scheme
If you have a broken operating system or if you see a lot of bugs (glitches) when working, then you need to reinstall the system. Since a large number of different laptops, netbooks and other devices with a daily CD / DVD drive have appeared on the market, the demand for a modern flash drive is growing significantly. So, since buying an external CD / DVD drive is expensive and not particularly required. And now I’ll tell you how to create a system flash drive with your own hands, in three different ways at home.
New flash drive with additional programs Windows 7 USB / DVD Download Tool
Let's get started with the simplest and fastest way to create a secure flash drive with Windows 7 programs USB / DVD Download Tool - this is a good utility from Microsoft, created for simple and manual creation of a downloadable system on various types of computers noses. What makes it easier to create a valuable flash drive for personal laptops, netbooks and personal computers with a faulty drive. Next, let’s take a look at the creation of a vandalized flash drive using this additional program:
- Download and install Windows 7 USB/DVD Download Tool.
- We launch our program as administrator. To do this, press the right mouse button on the program shortcut and select the “Run as administrator” item.
- The Microsoft Store program will appear before you. You must click the “Browse” button to select the operating system to create the image in ISO format.
- After making a selection, press the “Next” button.
- Then you will now be presented with the opportunity to transfer to a DVD or USB drive. So, if we want to create a special flash drive, we need to select the “USB devise” item.
- Then the program prompts you to select the USB drive on which you want to burn the operating system image. You select the flash drive you need and click the “Begin copying” button.
- Next, the program will format and install in automatic mode.
- After about an hour, the backup will reach 100% and the status “Backup completed” will appear in front of you, which will signal that the creation of the backup flash drive has been completed.
- We close our program and now you can take advantage of the vikorist’s flash drive for recognition.
Advanced flash drive with additional UltraISO utility
Now let’s take a look at one of the most popular and widespread programs. UltraISO is a program designed for reading, editing and creating disk images. This program is very simple and user-friendly for basic personal computer users. This program is designed to help you work, and you can also work with more than 30 file formats. And now let’s figure out how to create an amazing flash drive using the UltraISO program with step-by-step instructions.
- Download and install the UltraISO program.
- Use the right mouse button to click on the UltraISO program shortcut and select the “Run as administrator” item.
- On the toolbar, click on the “File” tab and select the “Open” item. Or press the combination Ctrl + O.
- After we select the image of the operating system we need to create a valuable flash drive. For example, I have an image of the operating system Windows 7 Ultimate Ru x86-x64 Orig wBootMenu by-ovgorskiy.
- Use the left mouse button to click on the name of the operating system (this is visible to us).
- Open the “Self-Vantation” tab. Select the item “Burn hard disk image”.
- When a leaking window appears in front of you, you need to check whether the correct flash drive is installed, the operating system, as well as the method for writing the original flash drive. The fault is caused by installations in USB-HDD format. We check and press the “Record” button.
- Next, the installation of data on the flash drive begins.
- After about an hour you will see the message “Recording completed”. This letter is to inform you that you have completed the creation of your precious flash drive.
- When finished, close the program and copy your flash drive to install the operating system.
A new flash drive with additional Windows command line
This method of creating a private flash drive does not require additional programs or utilities. And only someone deserves to inform you about this. It’s a little more complicated and it’ll take you a little more than an hour to look at the programs that we’ve looked at more. Next, let's look at all our actions step by step:
- Click on the “Viconati” icon. To do this, press two keys Win + R at the same time. However, you may have a different name. In the city Vyacheslav will be yours.
- When the field is empty, enter the “cmd” command. This team opens the command line. Next we will work in it.
- In the command line, enter the command “DISKPART”.
- Then enter the command “list disk”. This command will give us the opportunity to increase storage by connecting to a PC.
- Enter the command “select disk 1”. With this command we select our flash drive.
- Next we clean our flash drive. For this, enter the “clean” command.
- The offensive point is the creation of the primary division. To do this, enter the command “create partition primary”.
- It is necessary to select the partition that you have selected using the “select partition” command.
- Enter the command “active”. This command makes the selections active.
- Next, you need to format the flash drive in the NTFS system. For this we type the command “format fs = NTFS”.
- It's okay until the system formats your flash drive to 100%.
- Below are the letters of the name of our flash drive. For this we use the command “assign letter = O”. Choose the letter for the name of the flash drive yourself. Mine has the letter O.
- After this, you will see the “Early Disk O” folder.
- Enter the “Exit” command in the command line. This command closes the command row.
- All files of the operating system are transferred to the “Known Disk O” folder. Files must be copied (transferred) only in unpacked form. Do not simply copy the image of the operating system in one file, such a flash drive will not work.
- The flash drive is ready for Vikoristan.
permanently
We talked about simple and smart ways to create a powerful flash drive, vikorist and various programs. We hope that this article has helped you understand the principle of creation. Do not forget about those who install (reinstall) the operating system using an additional flash drive, you need to set the first launch of the operating system from USB, through the BIOS. Otherwise, the device does not recognize your image of the operating system or recordings on the flash drive.
Most current models of mobile PCs do not have disk drives. Pochatkivtsіv koristuvachіv do not make it difficult if you need to rebuild the operating system. This is an inevitable process, as it starts to freeze very early.
In such a situation, how can you manage without a DVD drive? Exit! Let's take a look at how to get a flash drive. In this case, there is only one option, because USB connectors must be installed.
Programs for addicted flash drives
There are a number of programs that will help you record a self-imaging OS image. Using the additional utility Windows7USB / DVD Download Tool, you can quickly create a special flash drive for installing Windows. The program can be run with any significant features.
The first way to create a Windows image
Let's take a look at the report on how to properly create a flash drive with automatic downloads. For this purpose, we launch the utility in a non-standard way. By clicking on the shortcut with the right mouse button, we launch the program with administrator rights.
In the window, click “Browse” to allow you to select the version of Windows from which to create an ISO image. Then we move on (“Next”).
The program asks you to select between different media where the image will be recorded. In this case, there are two options: either a DVD disk or a USB flash drive. We choose another method, and emboss USB device.
Next, the utility prompts you to select between available USB drives. Select the one you want to make a record for, and start the process with the “Begin copying” button.
Using both mental and physical language, the image is recorded on a flash drive and formatted. Please ensure that no important data appears on it, otherwise it will be irrevocably wasted.
Formatting, as well as recording, is not difficult for the correspondent. The program itself will select the required parameters, and at the end will supply the ready-made device. You won’t have to close the program window and you can use the flash drive.
We create a stunning image on UltraISO
Another popular program, UltraISO, is designed specifically for people with different types of savings. Its capabilities are much wider than the previous ones. You can edit, read, create a disk image, etc.
Cob roboti
So we launch it with administrator rights. In the program menu you need to press the “file” item, and then “open”. A similar procedure can be performed using the key combination Ctrl + O. Next, you must select the Windows that will be recorded on the storage device. Select the capacity of the operating system.
Please see the bear (left button), and go to the self-love menu. Here is the option to burn a hard disk image. Choose yogo.
At the next stage, check once again all the selected parameters in the drain window, and itself: flash drive, OS. Varto turn your attention to the USB-HDD parameter, which is the recording method itself, which is responsible for the flash drive. Let's start recording.
The completed process will be notified in the dialog box - “recording completed”. We close the program and use the flash drive!
Write to a flash drive via the command line
You can download a Windows image onto a flash drive using the command line. This method is similar to other methods and does not require third-party software. Ale is more complex, and requires additional knowledge, and an hour.
Pratsyuemo in the command line
Let's take a look at the instructions:
In the start menu you need to launch the “Viconty” function. This is how you launch it using the Win + R keys. This is a built-in Windows security program.
In the window field that appears you need to write “cmd”. This is the command to launch the “team row”. She will have all further actions.
The first command to enter is “DISKPART”, press ENTER (this time press every time you run the command). Let's write the command “list disk”. Here you will see a list of hoarders found on your computer.
To preserve the image, the flash drive must be empty, so it is cleared with the “clean” command. We install the primary partition using the “create partition primary” option. The partition of the creation must be selected, for which we write “select partition”. When the section is activated, enter “active”.
The instruction “format fs = NTFS” formats the storage device. We check completion to 100%.
We assign flash letters to the assigned letters. Use the command “assign letter = O”. Varto emphasize on the letter “O” at the end of the command, it is given for the butt. Instead, you can use another letter.
Finally, the folder with the recovered flash drive will open. We complete the operations in the command line, for which we write “Exit”. The program closes.
Transfer the OS files to the folder of the created disk “O”. It’s not your fault to save any archives! Nakopichuvach in the manner of preparations!
visnovok
The methods of forming images for attraction are examined, both in the simplest and most sensible ways. Having chosen the shortest method from them, it is not difficult to create a new flash drive. So, it is possible to create a working image of Windows, which will also help launch the OS that you are interested in working with.
On the Internet you can see photos of a vandalized flash drive. Please remember that she owes her mother enough revenge, otherwise the image will not fit. Having adjusted the BIOS system on the installed OS via a USB port, you can proceed to work.
USB storage devices have become an integral part of our lives. They can also be used to transfer information from one computer to another and view images and videos on TVs. The flash drive is compact, durable and of little importance. Most of the manufacturers offer boring cases that vary only in size and color. Although, the appearance of this gadget is a good field for creativity.
This collection contains original ideas for flash drive housings that you can install yourself.
Instructions for a self-propelled USB case
There is a lot to talk about about those with which you can build a body at home. For these purposes, use a small block of wood, a Lego block, a keyboard button, a used igniter, or a small child’s toy.
The shell of a flash card with epoxy glue in Burshtin color looks inconspicuous; a small object or a komaha can be walled up in it. Fans of polymer clay can make a body of any shape. And since the government has lost empty cartridges, a useful military gadget will emerge.
And if you can always find the materials at home, you will still have to buy some extra materials.
purchase
If the energy supply with the membrane is high, it is time to check the availability of the necessary materials and tools. The minimum set we need:
- old flash drive for disassembly, for example Transcend JetFlash 2 GB;
- ghost knife;
- pliers;
- heat gun with a minimum intensity of 20 W and more.
On the Internet you can find photos of self-made flash drives with LEDs. Then you will need to prepare a light bulb, a 300 Ohm resistor, a soldering iron and a screwdriver.
Taking apart an old flash drive
The first step is to remove the old device and remove the board. For separate varto designs, use a sharp knife with a thin blade to cut the seam around the body, so that the two halves are secured together.
If your old device is in a molded case, then it can be repaired in the same way - open the lock with a guest object and move it close to the USB connector.
New building ready
To be clear, we’ll show you how to make a case for a flash drive containing a child’s game. To do this, divide it with a knife into 2 parts, one of which will be the lid. Hollow gum or plastic blanks do not require further processing.
The other one on the right is toys with a “filling” of hard ribs or a jumper. Use pliers to pry in the middle of the entire edge, at the same time cutting the sharp edges with a knife. There must be an empty space in the middle of the workpiece, sufficient for installing the flash board and LED.
In order to remain lit during the hour of connection, drill holes with a diameter of 2-3 mm in the body of the toy using a screwdriver.
soldering LED
We take a light-emitting diode and visually identify its positive pole behind the smallest area of the electrode. Using a soldering iron, we connect a circuit of pins with a resistor. We install the heat-shrinkable tubes at the ends and begin to solder the contacts until the flash drive is connected to the following circuit:
"+" The LED (at the junction with the resistor) is connected to the rightmost bottom of the board;
"-" is soldered to the leftmost leg.
selecting a flash drive
The remaining stage of updating and repairing a flash drive with your own hands is installing and fixing the board in the toy body. We insert a flash card with an LED into the toy and fill the empty space with glue using a heat gun.
Irregularities and excess glue can be cleaned with a stationery knife, and nicks or sharp edges can be dulled with sandpaper.
In order to improvise a lid - another part of the toy that is closed, you can attach a small magnet in the middle of it.
Checking a new device
After the accumulation, it is necessary to check the accumulation for practicality. If everything has been completed correctly, then when connected to a PC, the LED light will turn on and the card will be ready before the end. If something went wrong, it’s not a good idea to get embarrassed. Learn the main problems with flash drives and removal methods. All breakdowns are divided into mechanical or physical, electrical and software breakdowns.
Mechanical damage
Most often, the stench is a legacy of the poor taste of the koristuvach. A flash card that can be used without a dry bag is weak to static, and the USB connector may be bent. Therefore, keep portable notebooks safe only in closed form or in special cases.
It’s not uncommon for someone to step on something and miss it from above. In this case, the USB pins or contacts on the board may be soldered, which indicate the connection.
You can fix the defect by resoldering the outer contacts of the plug. If after this the flash drive comes to life and begins to fade, but still does not work, then the obvious reason is the need for new data transfer. The same soldering iron will come to help.
electrical faults
The most common cause of electrical damage is water that has penetrated the middle of the flash drive. Such a device cannot be recognized on the computer. The flooded device must be carefully cleaned of dirt, salt and waste, soaked in isopropyl alcohol and thoroughly dried before vicinity.
Other causes of electrical breakdowns include soldering defects, static discharges, overheating due to loss of heat transfer in the housing and voltage surges. Here you will have to undergo a hardware upgrade - replace defective parts, solder defective parts again.
Software (logical) problems
They are visible to the invisible eye - failures of firmware or microprograms. To repair them, you can use special utilities or format the storage device. Periodically check the flash card system for damage, only make sure to unplug it safely, and do not leave the device in the middle of operation.
DIY photo of flash drive
DIY hacker flash drive with BIOS chips
Having been amazed at all the cases for flash drives, both commercial and de-i-Vine, having read a number of articles on modding, I became overly excited to try myself in this type of creativity (rosibrat, zlamat, zibrat). This problem also coincided with one unbreakable problem - a USB Flash Drive similar to the case of the device.
Having found in the room a bunch of rubble with ancient achievements of the IT industry, I began to scan the words onto a flash drive-case-like elements.
Yeah, having picked up one of the motherboards, I was surprised to almost immediately fall on the BIOS chip, and, to begin with, it’s all simple. I rushed to Google Yandex. However, my search did not end with looking at the buy photos and reading a lot of geek-saving dudes.
Therefore, the meta of this post is not understood. Moreover, as a result of customization, the result will be a completely good product.
For preparation we need 4 types of memory:
- flash accumulator,
- standard chips from an old motherboard or video card,
- three-inch floppy disk,
- Primary human memory, as the term goes, saving information for more than a year))
All you need is glue, just a second, a knife, pliers or strong fingers.
1. First of all, choose a flash drive:
The smaller the size of the flash drive, the more beautiful it is, the color of the plastic in which the contacts are sealed is due to being black otherwise it will not be boyish (not to the color of the microcircuit chips).
2. Lamaemo.
In principle, it’s good to be careful with the case, but you won’t need to be careful anymore; you’ll have to be careful when the generator of your flash drive has shown incredible intelligence and has soldered the ends of the steel casing into the board. For dismantling, you can use the soldering iron or renew your fingers. With one flash drive I was spared, but instead I had a chance to play games over the gas of flowers.
3. Remove the chips
The chips must be as long as they are respectable and must not be separated from the connector soldered to the payment for them. There is no need to remove the stickers, the smells are holographic and shimmer with a pleasant spectrum.
4. Glued
We test the flash drive to ensure that the new case slams shut (the chips are connected as shown in the front photo) and glue them to the chips. It is important that the glue does not squirm out.
So at this stage it is necessary to insert the middle of the fastening for fastening, it can be in the center or on the side in the stowage so that you will pull it on your shoulders or with the keychain.
5. Dodamo obsyagu
To improve the usability of the flash drive, we close the size of the plug with the contacts, so that we can properly enter the USB connector and stay there, we need thin plastic, just suitable for the way our floppy disks are made.
Now you have a food answer: “Why are you saving a stack of these old floppy disks, since you don’t really have a flop in your computer?”
Glue 3 pads: one is glued onto a wide surface (Zaya, let’s do it without contacts), two others on the sides. It's dying. A light sanding knife.
For the flowers you can find the date of their name...
“- Then I’ll send you a flash drive with price lists, just be careful, before speaking, it’s the same as your name Marina.”
And if there is no fire, then Marina’s flash drive vibrates a song of hostility at people. For example, having attracted a resume from a recruitment agency to it, all the staff began to advertise only administrative vacancies and entirely positions within my competence, without even looking at those that I had written.
So they often started asking for help with the computer and following this plan:
- Hey, is it true that you can generate “WebMoney” with the help of “Artman”?
I agree that my post will continue until the end.