Increasing computer RAM: main and alternative ways to solve the problem. How much RAM does a computer need? RAM and main characteristics

Good afternoon.

Today's article is dedicated to RAM, or more precisely, the amount of memory on our computers (RAM is often used up - RAM). RAM plays an important role in a computer, if the memory is not used - the PC begins to chatter, games and programs are reluctant to open, the picture on the monitor begins to “wrinkle”, moving towards the hard drive. The article speaks specifically about the nutrition associated with memory: the types of memory that it takes into account.

How to find out how much RAM you have?

1) The easiest way to do this is to go to “my computer” and right-click the bear next to any window. Then select “authority” from the context menu of the explorer. You can also open the control panel and enter “system” in the sound row. Screenshot below.

The amount of RAM is indicated by the productivity index, under information about the processor.

4GB- Volume of RAM. The more the better. But don’t forget that if the system’s processor is not so powerful, it’s important to install RAM. The planks can be of completely different sizes: from 1GB to 32GB and more. About the miracles. lower.

1600Mhz PC3-12800- Operating frequency (throughput). Please refer to this display for help with the axle plate:

DDR3 modules

Name

Bus frequency

Accessibility

As is obvious from the table, the throughput capacity of such RAM is 12800 MB/s. Not found to date, but as practice shows, for a computer's speed code it is much more important than its memory.

Amount of RAM on a computer

1 GB – 2 GB

Today, this amount of RAM can only be used on office computers: for editing documents, surfing the Internet, sending. You can run games with this amount of RAM, but in the simplest way.

Before speaking, with this obligation you can install Windows 7, and it will work normally. However, if you open the heel of documents, the system may begin to “get muddled”: it will not respond so quickly and eagerly to your commands, the picture on the screen may begin to “wrinkle” (especially the igor).

So, if there is a shortage of RAM, the computer will be stored: part of the information from the RAM, which is not currently stored, will be recorded on the hard drive, and then, if necessary, read from it. Obviously, with this situation in place, the need for a hard disk drive is less important, and it can also be considered as fast as a computer server.

4 GB

The most popular amount of acute respiratory disease in the remaining hours. Install 4 GB of memory on most current PCs and laptops running Windows 7/8. This is sufficient for normal work with office programs, to allow you to run all daily games (not at maximum settings), and to watch HD videos.

8 GB

This kind of ritual of remembrance on this day is very popular. It allows you to unlock dozens of add-ons, which will make your computer run even more quickly. Before that, for this amount of memory you can run a lot of current games at high settings.

Prote varto immediately mean. What kind of memory loss will come into play if you have a powerful processor on your system: Core i7 or Phenom II X4. Then you can use the memory completely - and you won’t have to change the download file, so the speed of the work will improve at times. In addition, the use of a hard drive changes and energy consumption decreases (this is true for a laptop).

Before speaking, there is a turning point here: if you have a budget processor, then installing 8 GB of memory makes no sense. It’s just that the processor only uses RAM, say 3-4 GB, and the memory will not provide any speed to your computer.

RAM is a computer component. The most important characteristic is measured in gigabytes: the bigger, the smaller. Other characteristics are much less important - timings and number of strips, dual-channel... This device has no other names:

  • "mizki"
  • memory
  • RAM
  • RAM (random access device)
  • SDRAM

What does RAM look like?

The article clearly explains the meaning of RAM, methods of self-installation (as easy as replacing a light bulb!), and subtle selections. Golovnya: after reading a couple of sides of this text, it is easy for the sellers to understand the marketing mantras about frequencies with megahertz and the meaning - that you need another gigabyte of memory, and that the seller is selling unnecessary goods.

What to do with RAM: a clear explanation

Tim saves operational information hourly. Not the one that is needed to save movies and music, but the one that is used by Windows itself, programs, games, etc. Such information is saved only when the PC is turned on. The computer turns on, the system starts – and at the start time, programs and modules are launched to record the required data from the HDD to the RAM. So, so that the computer can “sink” with these data even more quickly. promptly operate(The word and the term are “operative”).

To put it briefly, this is a superfluous memory, which is 300 times faster for a hard drive. The quick access to programs (the menu appears with the right mouse button, let’s say) is a merit of the high speed of the RAM.

Analogue of RAM in the real world - those that are stored in the human brain for a short hour. These data are ready until the brain breaks any second. With the RAM in the brain, you can store, for example, information that is memorized for a short hour, during the execution of any work. For example, it’s important that 9 + 3 = 1 and 2 in your mind... Otherwise, the waiter will remember that after washing the table - this information will soon be forgotten in a couple of years, replacing it with something else. Obviously, it’s not quite right to revive human memory and computer memory, since the brain works differently and everything that was lost in RAM can be forgotten and lost in long-term memory (for HDD ), what you can’t do with a computer... With a HDD, you can equalize the memory of a long line, for example, we read a book and remembered it. However, access to such data is sometimes not easy, so in order to figure it out, you need to take a book from the police and refresh your memory - such memory can be compared with the memory of the hard drive in a computer - it’s not simple, but fundamental.

You will find that there are still very similar types of memory. The computer has a processor cache that is firmly embedded in the CPU, and in the human head there are those that are tightly memorized back in school: the multiplication table, “live - write with letter i”, “two two” etc. P.

How many GB of RAM is required?

Why is more better for us? So, just before the singing boundary. Today's computers (from 2012 to 14) are very rarely equipped with one gigabyte of RAM - but they are just the day before yesterday and an exhibit for a museum, and not a real product in 2017.

2 gigabytes RAM is the typical capacity of a budget machine. Perhaps there is enough - but it is extremely uncomfortable because of the speed and sensitivity even with a closed browser, Word, Skype and antivirus. No, as of 2017, two gigabytes are incredibly small - but you can absolutely live with them.

4 gigabytes RAM is the “threshold” value of the RAM capacity. Both budget laptop models and more or less expensive analogues are equipped with several gigabytes. Is it enough? Seemingly so; But I don’t have enough reserves. The “lack of effort” of the program and the operating system itself is designed to consume all 4 gigabytes at the end of the day, never mind.

8 gigabytes DDR is a zone of comfort and peace. It’s rare, very rare that a computer needs 5-6 gigabytes of RAM (this is the case in 2016, but in 2018 the appetite for code may be clogged and not such a great deal!).

16, 32 (or 128!) gigabytes RAM is unlikely to be needed by a cross-country space traveler - but not even in space. What's the point of a vantazhivka's large-tonne body if the car doesn't carry anything big for a car? In 2017, people are unlikely to buy additional gigabytes of RAM in order to simply stink.

The table shows the main “eaters” of RAM. The numbers are different - for some Windows takes up more megabytes, for others less. Tabs with sites can contain a short side without little details, or they can contain monstrous panels of social networks with all kinds of contacts, blinkers and fortune-telling. The games work well, but before they start, unneeded browsers and text documents are removed.

Well, table: who is how much “jar” of RAM is there. Typical implementation of OZP with daily programs. 2016-2017 rocks; more - more.

Program and components Amount of RAM used, megabytes (not GB!)
Windows 7 500-1500
Windows 8 (or 10) 500-1800
Browser with 5-7 open tabs 400-800
Word 200
Skype 100
Numerical service processes, updates, drivers 10-20 MB per skin from 20-50 such microprograms = 200-1000 megabytes
Download manager 20-30
Suchasna gra 2000-3000
Graz zrazka 2010-2012 r 1000-2000
Antivirus in the first place 300-500
Antivirus in full scan mode 2000-2500

So how much RAM is needed for Windows 7, for example? Be careful not to buy a computer with 2 gigabytes on board - that's not enough. 4 gigabytes is just good, 8 is super. More is not good, as a rule. 16 gigabytes are more needed for:

  • stuck “computers”, for some completely standard tasks - run 2-3 virtual systems in Windows;
  • heavy gamers with high-resolution monitors and expensive video cards;
  • programs with the need for development and testing of desktop programs;
  • video designers and their photo colleagues - and that is not the same;
  • It’s just that he wants more, less than others. Without regard to practicality.

Types of RAM, frequency and other characteristics

Since the first DDR standard was introduced, 18-20 years have already passed. As many generations of computers have changed, their productivity has increased exponentially. At any time, there will be more than two generations of memory. In 2017, DDR3 quickly became outdated, as Rock 7 entered the market, and DDR4 is now important. If you buy a new computer, then, more than anything, you will be equipped with the fourth generation of RAM. If you are talking about upgrading an old one (5-8 years old), then DDR3 is in the middle. The generations are not incompatible with each other: it is physically impossible to insert a DDR4 die into a three-way socket, and then again.

RAM for laptops varies depending on the physical size of the desktop. Laptop RAM is two times less than standard. The frequencies, volume and generation of DDR correspond to the same for laptops and PCs. True, memory for laptops is further divided into two subcategories that are physically inconsistent with each other:

  • standardSO-DIMM(The prefix SO indicates the laptop size of RAM) - the most advanced option;
  • memory from low energy consumption SO-DDR3L(or just DDR3L, or new DDR4L): Most often found in inexpensive laptop models.

Another important characteristic of OPP is frequency. The more, the better, in principle - but DDR4 at 2100 MHz is just a penny more than DDR4 at 2800 MHz. The difference is not just 1-2 hundred rubles, but it’s just a few extras. It’s not easy to overpay for megahertz – as much as 2-3 dollars. Other characteristics of memory: delays and timings. The lower the timings, the faster the memory works (everything is correct - timing 10 is faster, lower than 12). You definitely don’t focus on this characteristic, although in the era of DDR/DDR2 around 15, timings meant more than today. However, this is already history.

Prices for RAM: focusing on propositions

Since about 2010, RAM has been obscenely cheap compared to older watches. How much? We ask that you pay for prices in dollars, aka...they are not called “evergreen” for nothing. The prices given are not the cheapest, according to the online store Bayon.ru - then out of stock.

Table: RAM capacity (for a laptop and for a PC), 2017. Presented are DDR3 and DDR4 models, as well as “laptop” SO-DIMM form factors.

Memory type Frequency, MHz Price,$ Note
DDR3, 2 GB 1600 19,85 The cheapest decent option
DDR3, 4 GB 1600 26,00
DDR3, 4 GB 2400 32,15 Dear, overclocked RAM
DDR3, 8 GB 1600 38,60
SO-DIMM DDR3, 2 GB 1600 19,85 The cheapest RAM stick for a laptop
SO-DIMM DDR3, 4 GB 1600 27,50 The most popular type of RAM for a laptop
SO-DIMM DDR3, 4 GB 1833 29,30 Popular volume, increased frequency
SO-DIMM DDR3, 8 GB 1600 34,50 Great service, standard frequency
DDR4, 4 GB 2133 26,00 Average DDR3 4 GB
DDR4, 8 GB 2133 42,90 The great obsyagu bar is popular
DDR4, 8 GB 2400 55,60 Great service, increased frequency
SO-DIMM DDR4, 4 GB 2133 27,50 Standard current laptop bar
SO-DIMM DDR4, 8 GB 2133 43,50 Volume bar of daily laptop

Chi varto upgrade (add) RAM?

Definitely so, if you intend to reduce the RAM to less than 2-3 gigabytes: the increase in productivity will be immediately visible. The “critical point” of productivity is located in the middle between 2 and 4 GB of RAM. Less RAM means less speed. More - everything works as required, in one word - “flies”.

More likely, no less, since the apparent volume is more than 4 gigabytes. The computer's speed will likely increase, but there will be significantly less suspension and lag. It's a nasty investment.

No wonder, since there are already 6-8 gigabytes “on board”.

There is nothing, since the sense of updating is to buy DDR with a higher clock frequency. The cost of such an upgrade is non-zero, then it is not like that.

How can I add RAM to my computer? What about a laptop? Do-it-yourself RAM upgrade

PC desktops are the largest creations. The middle of the case can accommodate up to ten laptops (by size!). There are a lot of slots and connectors on desktop motherboards, even in ultra-compact laptops, which saves every millimeter. The typical number of slots on a computer for RAM is 2 or 4. Make sure you use only 1-2 of them. Add the RAM bar to the one already working - there are a lot of things on the right. All you have to do is turn on the computer, open the system unit and insert the DDR stick into the power socket. No tools or screws required.

The main thing is that the RAM is of the secondary generation. Currently, DDR4 cannot be inserted into the slot for DDR3: their sizes are different. And the axis of the additional strip can be whatever it is. Frequency is the same, but at different frequencies of many RAM strips, the computer works at the least of them.

Laptops are all the more foldable. They have three types of slots for RAM:

  1. Dvoslot configurations: As a rule, 2 sockets are already inserted according to the “operator” In this case, you need to add one larger module and replace the existing one with a new one. Classics of the genre: 4 GB of RAM, 2 sticks of 2 GB each. There are no other roses. Come buy a 4 GB memory module (or 8 GB, as needed), and install it to replace the old one. The result is 6 GB of RAM. The old module can be sold.

Usually there are two slots, one for any occupation, the other for free time. Everything is perfectly simple: you need to purchase additional RAM of any size and insert it into an empty slot. For example, there was 4 GB (one stick), you can purchase another 4 GB on one stick, insert... the result is 8 GB.

  1. Single-slot configurations(Check out inexpensive laptop models). There's only one plug there, and it's obviously already filled with RAM. The only option is to remove the old module and install a new one – it’s a big deal.
  2. Laptops with soldered RAM. The upgrade is quite difficult: removing the old module and installing a new one again is a non-trivial and very difficult task. However, the RAM is less likely to be used up in inexpensive machines, and not very often.

How to determine the number of slots and type of memory in a laptop or computer

Please use any diagnostic program on the CPU-Z platform. Preserving, installing, marveling at the memory section.

Basic information about RAM: how many gigabytes there are, can be found in the Memory tab. The following characteristics are immediately visible:

  • Memory type: DDR3
  • RAM capacity: 6 GB
  • Number of channels: 2 (Dual)
  • The smallest indicators are timings and frequency: 665.1 MHz (the DDR standard respects the two-way exchange of information with memory, so the reference frequency is 1333 MHz).

You can earn bonuses like this: the computer (in this case, a laptop) clearly has 2 slots, which are occupied. This specifies a dual-channel operating mode, which is only possible due to the presence of a pair of strips. The second version is obviously a non-standard configuration: 4+2 GB of RAM. Make sure your device installs RAM that is a multiple of 2: 2, 4, 8 or 16 gigabytes. Ozhe, Vlasnik has already given up on the OZP upgrade.

A wealth of reporting information is described in the next section of the CPU-Z utility: SPD (brain power). At the upper left part of the window you can clearly see that there are 2 slots, unfortunately they are occupied. The first slot has a 2 GB (2048 MB) die with a frequency of 667 (1333 MHz). The other has 4 gigabytes (4096 MB) with the same frequency of 1333.

A couple of informational bonuses: the release date of one of the RAMs is visible (9th December 2011), and the release date of both RAMs: Nanya and PNY.

How can you upgrade the RAM of your application? 6 gigabytes is a completely sufficient supply for 2016, but it is very necessary - you can buy one 4 GB DDR3 stick (price - about 26 dollars), and insert it instead of the old 2-gigabyte (before speech, you can sell these dollars for 5 - 8). The bag comes with 8 gigabytes of RAM.

Virologists of operational memory: what is the most beautiful. I – prisoners for the sake of

Whoever doesn’t waste RAM: the processor giant AMD, Samsung, LG, Kingston, Corsair, etc. In the largest segment of RAM, there is no difference between the processors. All the smells emit a reliable DDR signal, which is designed for this kind of restart.

Think about the trace generator only in cases where serious overclocking is required, especially to the reliability, and, perhaps, to the artistic beauty of the RAM. That’s right, more expensive models are produced with unobtrusive, or attractive, radiators for cooling the modules.

I still. RAM is a miraculously reliable thing. It’s completely safe to take from hand, “second-hand” - more than everything, it produces a lot of fates, with the same characteristics and energy-supplying.

Operative memory - Madame Primkhlya. One by one, there’s a lot to choose from, but it’s extremely rewarding to choose a bet: having said that, don’t hook me up with someone. Moreover, the non-living nature of the RAM can be known immediately after the appearance of blood pressure, and over time. For example, if you absolutely need a computer.

Today we will put all the checks above the “E” in the power supply, so that you can install different RAM strips on one PC, so that you can work together on the memory of different generations, types, systems, frequencies and generators. And if it is possible, then for any minds.


Link generation

My motherboard has RAM slotsDDR2 taDDR3. How can dies of this or that type be installed on it?

The answer is clear – no. Such hybrid modifications of motherboards were produced between the transition from the DDR2 to DDR3 standard. They are designed to work with DDR2 memory with a frequency of 667, 800 and 1066 mHz, or with DDR3 memory with a frequency of 1066 and 1333 mHz. If you install DDR2 and DDR3 on such a board at once (obviously, in a slot of the same type), the computer will not start.

DDR3 + DDR3L =?

It is possible to combine two modules togetherRAM, oneDDR-3, and the other isDDR-3L? How does the other differ from the first?

DDR3 memory has been the only choice for the past three years. Just shortly before its release, the DDR4 market was hit by a new modification – DDR3L. The letter “L” in the name of the remaining one means “low voltage”.

The DDR3L RAM operates at a voltage of 1.35 V, and its front end operates at 1.5 V – which means it has the same power supply. The edges of the planks of this and that type should be ironed the same way.

The DDR3L standard is completely incompatible with motherboards and processors designed for DDR3, but not at all. Thus, Intel microprocessors with the Skylake S microarchitecture do not officially support DDR 3, but do support DDR 3L.

More combinations of modules of one or another type are possible, but not necessary. All the memory is installed in the slots of one motherboard, living under the voltage of the same level, so the best minds will have only one of the strips. Computers with such a RAM configuration usually operate unstable, and computers do not turn on.

Volume and channels

I want to install RAM in all 4 slots, what is the significance of the skin module? What combination works best – 4 sticks of 2 GB, 2 sticks of 4 GB or 1 stick of 8 GB?

The only way to use up the RAM is to avoid exceeding the maximum allowable value, otherwise the computer will not turn on or part of the memory will be lost. The assertion that all RAM has the same capacity is a myth. It doesn’t happen as much, so put it as much as you want.

All modern desktops and many laptops support multi-channel RAM mode. With this method of organizing, access to memory occurs not one at a time, but along several parallel lines, which significantly increases the productivity of the machine.

Motherboards with several RAM slots (the widest type) operate in dual-channel mode, so they have 2 connectors per channel.

In three combinations, the best option is two 4 GB sticks, so you can distribute them one per channel. Why two and not just two? Because the actual speed of data exchange between the controller and the skin RAM module is not the same, and the more sticks, the more hours are spent on their synchronization.

If the RAM modules were running in multi-channel mode, the following would cause problems:

  • Same frequency.
  • Approximately one capacity (small capacities per unit are acceptable).
  • One type (for example, either DDR3 or DDR3L).

And her fierceness can be steamy.

Before speaking, RAM slots for one channel are often assigned to the same color. Don't worry about it. To find out what smells are on your mother, please read these instructions as soon as possible.

Frequencies and timings

What can be combined with different timings? If so, then at what frequency do the stinks operate?

It is possible, perhaps. Each unit of RAM stores information about frequency adjustment and timing internally (for the SPD chip). The memory controller reads this data and selects a mode in which all modules can operate. As a rule, the frequency and timings are the most effective of them.

Massacres of virobniks

Chi obov'yazkovo kupuvati operative memory of one virobnik?

It is important to get RAM not just from one brand, but from factory sets with many modules. These devices have undergone extensive testing and are guaranteed to work properly.

It turns out that RAM of the same brand and model, purchased separately, cannot be “understood”. It happens inadvertently, if the slaughter of the devices demonstrates an important command robot. How to spare, if only the first option is to blame. Most often, the dies of different generators with similar characteristics are amazing.

More on the site:

How can you combine different RAM sticks in one computer? updated: Kviten 26, 2018 by: Johnny Mnemonic

The problem of availability of all operational memory can cause problems on the right skin. Once, if you plan to add one or more RAM sticks to your computer, this situation will arise. The system authorities say that 4GB is installed, but only 2GB is available. Or instead of 8GB = 4GB.

This article lets us know how to fix this problem and fix Windows and remove all RAM.

How can all the installed RAM be available?

In front of us, Varto will make a couple of speeches. Pershe - . If you have 32 (x86) bit Windows, then more than 3.2 GB of RAM is not suitable! The only option for this option is to install a 64-bit OS.

Also, at times, it will be useful to use any of your operational memory. Get a little more than 700MB. This can only be corrected by installing a discrete (very expensive) video card with its own video memory.

If you have 64-bit Windows and a discrete video card, but not all the RAM is available, then you will need to get started.

To begin with, open the system unit, remove all RAM modules and wipe the contacts on them with an alcohol pad or a simple sponge and insert them back, reversing them. This helps a lot.

One possible reason is bad RAM contact

In the near future, the function will be enabled in the BIOS settings. Please be listed in the Advanced - North Bridge Configuration section.

Improved Memory Remap Feature option in BIOS

You also need to go to the system configurator by pressing the “Windows” + “R” buttons on the keyboard and entering the “msconfig” command in the window.

Combination of Win+R buttons on the keyboard

Open the system configurator using the msconfig command

In the window, go to the tab “Add-on” -> “Additional parameters”.

RAM is one of the main storage components of a stable computer. Without it, the PC cannot work, and without a sufficient amount of OCP, the computer cannot run part of the program. Let's take a look at how RAM works, how to increase the amount of RAM and other things.

Let’s first figure out what running out of RAM means. In Russian it sounds like “Random access memory device”, and in English it sounds like “Random Access Memory”. The particularity of the details lies in the fact that it only works when the computer is turned off. The RAM saves the processing of data and concatenated codes by the processor.

Principle of robotic RAM approach:

  1. The skin memory compartment is in its own order and sequence.
  2. As the hour progresses, the computer boosts the signal to one row.
  3. Through an electrical signal, the transistor turns on.
  4. The charged charge from the capacitor is transferred to one of the available stations, until a sensitive assistant is connected.
  5. The supply from the capacitor, when discharged, flows through registration through the booster, after which the necessary command is issued.

Through those whose RAM operates on senders, it is not possible to save information across the network.

How to increase the RAM on your computer and laptop?

To describe briefly, there are many ways to increase the amount of RAM. The main one is adding new strips to the motherboard. Alternatively, you can change the swap file data. Let's take a look at the skin method below.

Increased capacity with additional memory modules

For stable operation, modern computers require at least 2 GB of RAM stored in the installed operating system. For example, the same procedure is required for Windows 10 64 bit. The main method of this expansion is the addition or replacement of RAM strips.

It is important to understand that the module must be connected to a computer or laptop. For example, PCs with older processors do not support the RAM speed of 1666 MHz. The same problem exists with motherboards - most older models cannot handle parts that require more than 4 GB of memory.

To avoid mercy, the owner of the PC needs to know the name of the motherboard and processor model.

To check the processor, you need to complete a few other steps:

Using this method, you can check the compatibility of RAM with other PC parts.

How to determine the type of RAM

Before purchasing new devices, it is also important to know their type. If you buy an incorrect bar, you will have to turn it.

There are 4 types of RAM:

  • Ddr1 - “most recent”;
  • Ddr2 - also outdated;

  • Ddr3 - vikorist and at once;
  • Ddr4 - newest version:

There are a number of ways to determine what type is installed on your computer. We first need to familiarize ourselves with the sticker on the front side of the bar, as it is. Most often, it indicates the type of memory and other information. If the type is not indicated directly, you can use other icons to quickly indicate it. For example, if it says “PC3” it means ddr3, but if it says “PC2” it means ddr2.

The best method is to look at the lines between the two contact points. The diagram below will help you apply:

The remaining method: use a special software to scan the installation of components. For example, why the miracle? "AIDA64".

Laptops use the same markings, but a slightly different scheme. The dimensions of the planks are significantly smaller.

Installation of OZP modules

First of all, you need to open the computer case from the other side, where you can gain access to the motherboard. Obov'yazkovo We turn on the computer, pull out the wire from the socket and turn it off by pressing the “Start” button. Depending on the type of case, you will have to unscrew the screws on the back of the PC and remove the cover, remove the clamps, or simply open the door.

There are slots for RAM on the motherboard. The stench looms approximately like this:

If there are already modules that need to be replaced with new ones, they need to be dismantled. To do this, you need to press the clamps on the sides and pull the strips. It is necessary to be very careful, because the detail is very sensitive.

Now we take a new RAM and install it in the free slot. To do this, you need to insert the bar so that the groove aligns with the protrusion at the rose. It is necessary to press lightly on the module so that it reaches the socket. During installation, there may be a slight clicking sound, which means that the insertions have been automatically registered and the memory has been installed correctly. If it didn’t come out, but the bar is installed, I’ll manually “click” it.

It is recommended to insert the OPP guys into the slots of the same color, such as these. On most motherboards, the roses have two colors - 2 in one, 2 in another. Installing two new parts in the slot with the same fillings allows the devices to operate in dual-channel mode.

After this, we close the cover of the case, tighten the bolts and connect the PC to the electrical system. Let's try to start the computer - if the system starts the first time, then everything is set up correctly. If there is any doubt about the efficiency, it is recommended to check the new parts for further assistance.

In laptops, the principle is much the same, but there is little power. To get started, you need to turn on your laptop and turn it off. Next, we remove the battery - in its place in the model device, you will have to unscrew the screws on the back cover or use another method to open the case. After the battery has been removed, you need to press the power button to remove static charges.

To find the RAM slot, you need to remove the panel on the bottom of the device. The panels may be decals, so to be sure, it is recommended that you read the documents received upon purchase or look for them while selecting a specific model.

Most often, two slots for RAM are available. Budget models can only boast of one rose. More expensive devices may require more RAM. To pull out the old planks, you need to open the clamps on the sides. As soon as the smell is released, the part will rise at 45°.

We carefully insert the new module under this very box, checking that it fits correctly into the socket. Then you need to push the animal down onto the bar so that the clamps on the sides automatically close. Next, we turn all the panels on the place, install the battery and close the cover of the case. Let's try to soften the device. If there is any doubt about the usefulness of the laptop, we check with you for help

Alternative ways to increase OPP

In addition to installing new components, you can speed up the installation in other ways to increase the computer's RAM.

Expandable RAM for additional flash drives

The simplest and most accessible way to add RAM to a computer or laptop is to use a flash drive.

Beginning with Windows 7, you can quickly use the utility "Ready Boost".

  1. To get started, you need to insert a USB flash drive into your computer.
  2. Vidkryvaemo "Explorer" Then use the right mouse button to click on the name of the flash drive in the left menu.
  3. Select an item "Vlastivosti" then let's move on to the division "Ready Boost".
  4. We put a tick in the “Vikoristovat this device” box.
  5. Of course, when using a flash drive, which is considered as RAM, you can specify all the details at once.
  6. Clickmo "Zastosuvati", then "OK" then close the window.

This method is good because it does not require additional expenses for identifying a valid flash drive. You can safely wait until the new modules are added.

Changing BIOS settings

Changing the BIOS settings is required to overclock the RAM. Already, the main task of the BIOS is to ensure the ability of the computer to adjust the operation of components, the computer, etc.

  1. We restart the computer and press the key to enter the BIOS "Del","Esc","F2" And so on. You can press a bunch of keys so that you don’t have to restart your PC later.
  2. Onslaught "Ctrl+F1", the advanced settings window will open, if you don’t want to exit, go to the point "Advanced BIOS Features".
  3. Select an item "System Memory Multiplier" or else "Advanced DRAM Configuration".
  4. In separate "DRAM Timing Selectable" installable mode "Manual", for manual adjustment.
  5. We save changes and experiment with changing timings.
  6. We restart the computer; for special programs (for example, AIDA64), the settings can be changed.

Using this method, you can customize your PC for yourself. It is important to understand that it is the people’s responsibility to change in adjustments, if they would like to understand a little about it.

We hope that after this you will understand the principle of increasing the computer's RAM. If you have lost your food, please put them in the comments!