Instructions: Calibrating the laptop screen - adjusting the color. Instructions: Calibrating the laptop screen - adjusting the color Automatically adjusting the monitor on windows 10

Calibration is called the process of adjusting the color, brightness and contrast of the image of the monitor or another device for visualization (for example, a projector or TV) with a method to achieve the most complete increase in tone, color and color on the screen and every other hour. In the case of the butt-button, the calibration can be done on the basis of the natural image and accept the eye.

Because of the need to recalibrate the monitor, everyone could stick, if they brought yoga to the house from the store and turned it on first. Tim, who doesn't work in graphic editors and doesn't take photographs, does enough work "by eye" using the buttons on the monitor or Windows. Great accuracy is not important here - smut, so that the image was without obvious color schemes, the world has bright and contrast.

Artists, designers and photographers need more professional calibration, to be carried out either for additional programs, or for special devices - calibrators.

The first option is available to everyone - the main mass of such programs is cost-free and not too foldable in zastosuvanni. However, to achieve a good result, use an eye-diamond. Another option provides maximum accuracy, but it does not cost much. The reason is the high variability of calibrators. Navit budgetary device manage like a good smartphone, but then artists and photographers rent them, or they go to the services of fahivtsiv s calibration, since it doesn’t need to work often.

We don’t have any oscillators of the calibrator, let’s talk about ways to adjust the monitor for additional programs.

Easy monitor calibration using Windows

This tool to call us is called “Calibration of the quotes”. For Windows 10, wines are called through the "Parameters" program - "System" - "Screen" - "Additional screen parameters" section.

For Windows 7 and 8.1 - through the Keruvannya Panel and split the "Screen". Abo through the "Screen Options" at the context menu of the desktop.

After running the utility, step by step, complete the requested operations. But in front of it obov'yazkovo open the whole screen and sit right in front of it, otherwise the result may be inaccurate. Seen from your eyes to the screen, you can be like that, as if with a primal robot.

First cut - setting the main parameters of colors

Open the monitor menu by pressing the button on the yoga panel to set the color for the promotion. If you have a laptop, go to the next step.

Another krok - nalashtuvannya gami

In front of you is an image of a square with dark patches in the middle, and a lashed collar. At the center of the skin patches there is a speck. Your task is to work so that the specks become invisible (they became angry with the background).

The third krok - nastuvannya yaskravostі

Open the menu of the monitor again, or expand the "Electric Life" on the Windows power panel - now we need a call to adjust the brightness. You can replace something with the buttons “Yakravist-” and “Yakravist +” on the monitor panel or on the laptop keyboard.

Change the dressing, put it in such a way that the details of the costume and the shirt of the people in the picture were peacefully remembered, and the sign “X” on the wall behind him did not get angry with the background, but was more commemorated.

Quarter krok - adjusting the contrast

Controlling the adjustment of the contrast ratio, work in such a way that the folds and gudziks on the white shirt are clearly visible, and the shirt does not get angry with the wall.

Fifth krok - color balance

Moving the colors of three colors - red green and blue, make sure that smog in the center of the screen is neutral-similar.

Shostiy krok - saving calibration

Adjust more precisely (new) calibration with more. As if you are in power, press Done. If you want to go to the finalized display of the text, first mark it with the ensign "Launch ClearType zasib ...".

Improving the text

Here you should choose a butt, a de pangram (a text that includes all the letters of the alphabet), it is read more clearly, and you need to close it.

The Windows calibration tool is sufficient enough to properly adjust the monitor for work that is not related to graphics editing and artistic friend.

To check the quality of the calibration, you can use specially created tapestries from the RealColor.ru website. Pick up a set of trellises behind a damp, wide screen, so that the image does not change in size.

Monitor calibration for photography and graphics

How to take the best result

In order to take the right edge of the image, de black - tse black (and not dark gray), white - tse bile, and the color does not lie down at the turn of the screen, a professional monitor is needed. Photographers and graphic artists give priority to IPS screens (the best option is S-IPS).

On budget monitors with matrices of the TN type, you can achieve high accuracy of colors and colors, unfortunately, you can’t see it. I on the right is not in what the programs do not allow, but in the quality of the screen itself. Ale mi pratsyuvatemo z tim, scho maєmo.

Also, let’s start with the preparation of the workforce:

The monitor is guilty of standing there, de vie yogo victorist.
The premises may be sufficiently illuminated. Calibration is more likely to be carried out with that illumination, with which you work. How do you practice both with natural and with piece light, it is optimal to create two color profiles. The direction of the lamp was light and the hour of calibration was next visible on the screen.
Before the cob of calibration, the monitor is guilty of an hour of practice. EPT-monitor - not less than a year, reshti enough 30 khvilin.
The background image should be set to neutral, best in gray tones.

Adobe Gamma

For the help of Adobe Gamma, monitors are calibrated for work with Photoshop. Shards of the program created by one retailer, the stench is optimal for a sleeping victoria - profiles molded in Gamma, are displayed in the Photoshop menu, and the corystuvach can be smoothly mixed between them.

The utility is included in the Photoshop distribution kit, but for the sake of її you can get it and, well, not from the official site (її there is none), but from third-party resources. The settings won't change, it's enough to just run it.

If you carry out the calibration in the future, choose the version "Bit by roll".

Next - let's create a description of the new profile (in Latin letters).

Let's move on to the calibration process. Vykoristovuyuchi menu nalashtuvannya monitor, vіdreguluєmo brightness and contrast so that the gray square near the center at the end may be angry with black, but commemorate on yoga background. The frame is to be covered with white.

With the onset of the crack, the type of light (the color of the phosphor) is significant. The required value can be taken from the factory profile of the monitor (it will be installed behind the locks, as you didn’t change anything in advance in the settings). Just as important, fill in "Vlasne" or "HDTV (CCIR 709)".

Now let's take care of the shaping of the gami for the correct color (spіvіdnennia red, green and blue channels). For the help of the bellow, the brightness of the gray square against the background of black and white smog is restored, or we can set one of the meanings behind the locks. For PK-monitor it is better to choose 1.8, for EPT - 2.2.

How to take the ensign "Look at one din", the deputy of a gray square three - red, green and blue, with a lot of regulation tools. With help, you can pick up the color of the screen, like wine. Yakshcho nі - better than їх not chіpati.

After installation, the color temperature of the white point of the monitor is significant. Tsey parameter to lie down in the light of the necessary lighting. For work with a day light, it is optimal to set 6500 K, with a piece of warm (heating lamps) - 5000 K, with a piece of white (fluorescent lamps) - 9300 K.

To determine the color temperature visually, press the "Change" button.

On a darkened background, three light squares will be displayed. Your task is to choose the most neutral Syria.

At the final stage, we will install the white point as a hardware value and save the profile.

For quick editing of essential profiles, it is better to open the program in the viewing panel. Here we have to know how to find each other in one vіknі.

Evaluation of the quality of the calibration for the help of web services

Online services for rechecking monitors are manually tweaked as an addition to software calibrations. With this help, you can evaluate and adjust not only the clarity, contrast and color, scarlet and sharpness, geometry, the visibility of the beaten pixels, the riven merechtiny and other. It is important that you win a monitor for processing photographs or professional work with graphics.

There are no elements to fix in the services, so you need to fix it, you need to tweak third-party tools - buttons and the monitor menu, get Windows or programs.

Monteon.ru

Service Monteon.ru allows you to evaluate the following:

Color accuracy.
The presence of dead pixels.
Smoothness of gradient transitions.
Merekhtinnya (phase synchronization on VGA-monitors) and moiré (separation in a seemingly weak-looking visor, which is normally not to blame).
The sharpness of the cordons.
Brightness and contrast.
Zonal brightness (visibility of brightness in the center and on the periphery of the screen).
The geometry of the grid (viewing the edges of the image, peripheral screens on a widescreen screen with a 16:9 aspect ratio).

Online Monitor Test

Online Monitor Test is an English service. Here, 4 options for testing are suggested for selection:

Forgiveness - for Smart TV, tablets and smartphones.
In windowed browser format (recommended to run in windowed mode).
In the window format with a separate building 1920X1080 (the separate building may be changed).
The program looks like it is being launched by the browser. Pratsiuє without installation.

Online and offline versions of the program (simply written) should have the same set of tests.

Those who win two monitors can also perform a re-verification of the display of the image by one of them (Input lag).

For the help of Online Monitor Test, you can evaluate:

Vіdobrazhennya of close children of gray.
The accuracy of the transmission of the seven main colors and the smoothness of the color gradient.
Hour of Matrix Review (6 different tests).
Uniformity of illumination and color fill (5 colors).
The presence of dead pixels.
Merekhtinnya and moire.
Readability of the text, written in a small number of different fonts. The color of the text and the background can be changed for additional help.

The skin test is accompanied by an English prompt, but it’s difficult to understand how awkward it is without it.

So quickly and simply a leather jacket can calibrate your monitor in your home minds. To improve the clarity of the image, monitors are recommended to repeat skin calibration every 3-4 months.

Do not fill the quality of the image for the help of the side buttons on the monitor enough, so that the show will be at the peak of a good image. The calibration tool for windows 10 will allow you to reconsider that your monitor can be shown much better. For virobniki content smut perekonatis, scho robot z'appear on other outbuildings, such the most standard for quality. For the most prominent koristuvachiv, the review of films and photographs will be reduced. The first step is to recalibrate the monitor in windows 10, reset the monitor to the factory settings and turn on the light in the room so that the output is not visible.

Where to find out the calibration of the monitor

1 way. Windows 10 oscillators are updated and changed during the whole hour of the upgrade, by adding two ways to enter the parameters of the calibration of the monitor.

Vіdkryte " Parameters"and just write a joke" Monitor color calibration".
When you see a new window, go to the bottom method "How to adjust the colors for the additional color calibration tool".

2 way. Right-click on the mouse on the desktop and select "Screen settings".

At the top, press "Advanced screen settings".

Axis mi and went up to two parameters, as we need: "Color control", "Color calibration". Let's take a look at the following two parameters and report.

Yak koristuvatisya keruvannyam koloru in windows 10

To calibrate the monitor in windows 10, it is necessary to speed up the "color change" as it shows the profiles for your monitor. At the "Attachment" row, the profile of all connected outbuildings to the computer and connected profiles is displayed. On the "All profiles" tab, all available profiles are displayed. Choose a sprinkling of options, to marvel at how the stench appears. For an accurate result, you can create a color profile for the additional function "Color calibration".

How to set up the colors for the help of the color calibration tool

To adjust the color and calibrate the monitor in Windows 10, you need to change the monitor buttons to adjust the color of the aspects. Drag the windshield to the calibration monitor. Please select if you have monitors of the same brand and model, you need to adjust them for leather. Press "Dali".

The meister shows how much light is controlled by the amount of light that is emitted from the song color. Having pressed "dali", you can twist the bell for regulation.

Reach the minimum visibility of small dots near the center of the skin stake, like a master.

Brightness and contrast will be adjusted from the buttons on the monitor. On some monitors, there are buttons, which can be used to adjust brightness and contrast, in that case, on other monitors, you will need to go to the menu on the monitor and select two parameters there. To rozpochat nalashtuvannya, to press far.

Regulate the riven of brilliance, so that the shirt does not get angry with the suit, and X can be seen as if the master is telling you.

Adjust the contrast for the middle baby for a recommendation.

With a balance of colors, colors are not to blame for the "tekti" in gray tones. Press for adjustment.

Tightening the bugs, calibrate the colors.

Now you can switch between the front sizing and fabrics. As if everything is sovereign, ready to press, otherwise press the scribble, to squeal.

Troubleshooting that can be fixed

If the colors don’t look like they used to before, then it’s better for you to have a video card in order, or the monitor will need to be replaced. Try to connect another monitor to the computer and check it out. If the problem is not fixed, you will need to replace the video card, or change it to a different one. Correctly calibrating the monitor in windows 10 will help you significantly improve the quality of work for photographers, video operators, graphic designers and creative specialties. Polish the quality of images and computer games.

Below is a guide to the power-ups that are often installed when setting up a pen and touch add-on in Windows 8.1.

How do I know which computer has a touch screen?

Try pressing a tile on the start page with your finger. If the screen is touch-sensitive, the program is visible. You can also reverse the in-line adjustment of the system for an additional mouse:

Tablet display calibration

Most of the problems are caused by the lack of water. Tse navit imovіrnіshe, yakscho the touch screen will cease to work between you. If you are still not convinced, you should check. Run a system search for troubleshooting and select the correct result.

Tool to automatically detect problems and then fix them. However, at the same time, it is not all-season, and you may be able to continue reading. If the touch screen is responding properly or not recording your touches accurately, you may need to re-calibrate to bring the speed up to speed.

Select the right bottom corner of the screen, move the mouse cursor to the top, select the "Parameters" panel, then click the Change computer settings button.
Select Computer and add-on, and then select Information about the computer.
In retail Computer turn over the patching Pen and touch input, how to choose which type of input to display the screen.

Although the attachments have a touch screen, the touch input is locked and cannot be turned on.

Unmute and re-enable touch screen

Search for the system and select "Calibrate the screen for the pen or tilt". Nearest fix: Did you try to re-advantage? Tse technically glad, as if throwing a little rich, but there is a reason: it’s out of practice. We explain why. which is to blame for being your first step, turning on and off the touch screen again.

This is one of the simplest decisions, but do not start working. In fact, you can see that the problem still continues after the system is re-uploaded. Yakscho tse so, be kind, read. A driver is a piece of software that helps your control, for example, a touch screen, communicate with your computer's processor. As such, touch screen failures can be caused by a faulty driver.

How to calibrate the parameters of the sensor pen?

To adjust the parameters of the accuracy of the detection of the dotik of the pen or the finger:

Ask the field to enter a request Calibration, then press the button Screen calibration
Press the Calibration button, and then read the instructions on the screen.

How does it work, since the calibration of the parameters of the touch pen and the device can not read the function panels?

Also, when calibrating the parameters of the touch pen, the shift in the right edge of the screen does not display the function bars, apparently, Windows does not recognize the edge of the screen correctly as a result of the shift between the screen and the hour of calibration. Try vikonati so dії, schob vіdkalibruvati parameters of the pen and touch device.

You want to automatically update driver software. For necessities, finish reading the wizard's instructions, then restart that translation until your problem is solved. Otherwise, try to go directly to the dealer's website, look at the driver side, select the number of your add-on and select the remaining driver.

When the driver is downloaded, you can download it and install it automatically. For additional information about updating drivers, check with our helper about how your drivers may be outdated and require updating, but how do you know? First, do not correct yourself, as if you were not vicious!

Open the function bar behind the help keys: the key with the Windows logo + C. Let's press the Search button.
Ask the field to enter a request Calibration, then press the button Screen calibration under the pen tip or a touch input, so that you can open the tablet.
Reconsider that the monitor at the window Screen shows the screen, which is necessary to adjust.
Press the button Drop To confirm the choice, you need to enter the password of the administrator.

Unfortunately, not all versions of the drivers work well. If it is necessary to update the drivers, if you notice problems, you should try to turn around before locking. Then go to the Driver tab and choose. If you know that you have a larger older version of the driver, if you can work it out, if you can’t get to it through the vidkat, select “Vidality” on the “Driver” tab, and then follow the method, descriptions in short 4 above.

Now you can vibrati ta vibrati. Tse maє perevagi, as if security has been reduced, but it can also be wrong. I spodіvayus, our rada, induced more, vyrishila be-yaki problems, like you had behind your touch screen. As if you could not fix your touch screen in any way, especially, as in dekilkoh operating systems go to the picker for support.

In order to change the settings of the pen and the touch screen, I will not add it, try again to calibrate, press the button Vidkalibruvati, then read the instructions on the screen. To make sure that the Windows operating system correctly displays the edge of the screen, try carefully dragging the calibration point closer to the center of the screen.

For po'yazanogo vmіstu torkannya, if you have problems with the screen of the tablet, check out our helper about those, yak. Some products may not be available in your country or region. The first step is to start looking down at the bottom of the decision, the axis of deaky speech, it is necessary to know.

The solution, the most important solution for the solution of your problem, is found in the upper part. If you're having problems sticking with the wrong object, whichever you want, try using a surface pen or a different stylus. To know more, to marvel. . Whisk a soft, lint-free cloth soaked in water, or especially for eyepieces, but don’t apply the dye directly to the screen.

How to install touch input on your screen?

If you have two monitors, one of them is touch, then the touch input signal may not be processed as it was. For example, pressing on one monitor calls the cursor moving to another. To solve this problem:

Quickly put your finger in the middle of the right edge of the screen, and then click on the Poshku panel. (If you want to win the mouse, select the upper right corner of the screen, move the mouse's box down, and then press the Poshuk panel).
Ask the field to enter a request Calibration, then press the button Calibrate, so that you can enter the calibration window of the tablet.
Press the button Next, and then read the instructions on the screen.

How do I change the pen and the sensory attachment?

To change the speed, range and trivality dії:

Solution 3. Install rest updates

You need a keyboard or mouse that is connected to your surface. Sometimes everything that you need, so that I can work with the touch screen again, does not need to be re-advanced. Maybe the touchscreen doesn't work because you don't have much more to update.

Solution 5. Unmute and unmute the touch screen driver.

You need a keyboard or a mouse that is connected to your surface, as in the solution. If you don't work with two buttons, try it.

Solution 6: Reinstall the touch screen driver

If it doesn't work that re-enabled the touch screen driver, try it now.

Shvidko put it in the middle of the right edge of the screen, and then press the Poshku on the panel. (If you want to win the mouse, select the upper right corner of the screen, move the mouse's box down, and then press the Poshuk panel).
Enter a search phrase in the field pen and touch input, and then press the Pen button and touch input.
Press or select a date, as required, and then select Settings.
Check out the vkazіvki on the screen.

Solution 7: Resetting the touch screen calibration

Your surface will be automatically configured to install the touch screen driver for an hour when connected to the Internet. If solutions 1-6 do not work, please re-calibrate the touch screen. Since your surface has seen recalibration data, flip the touch screen, so that it can be changed, so that the fault is confirmed by the recalibration.

Reverse electromagnetic reshkodi

Decision 8. . Some other electronic devices may affect the touch screen or not move the cursor to the surface.

How to say that such a multi-touch tablet has powerful words, so you can recognize the spice of dots at once. So, the first tablets were with resistive displays and could only think of one dot (+ bula imitation of another). It's true, it's also worth using multitouch. After the appearance of these models, the possibility of multi-touch appeared. On the back of the head, it was less than two dots, and at the same time, the number could reach 10.

Solution 9: Check or discard the surface

The blame may be just a power smuga or a lamp on your table, or it may be similar to the great possession or banking computers. Vimknіt usi іnshі pristroї in the region, and then on the basis of urnіmknіt їх, to find out, what kind of pristry elicits the problem. If you didn’t know about the problem, turn over the dry land to a tighter place, as you can create electronic transfers. If you are still having problems with the touchscreen, try redoing or flipping the surface in that order.

Building management
Special programs

The multi-touch system uses widgets for managing widgets and other system programs. Much more opportunity is realized in third-party add-ons. For example, Google Maps miraculously demonstrates the possibility of multi-touch. For the help of less than two fingers, you can pobuvati in any point of the Earth.

Solution 10: Send in your surface for maintenance

Like a touch screen, like before, it won't work after all, your surface will need service. If the touchscreen doesn't respond correctly to being pushed, try these solutions. Razdіl "What work, like the screen on the surface is damaged." . Distributed "Cleansing that watch over your surface." If the touch screen, as before, is not working correctly, go to solution 2.

Solution 2. Reseat the surface

To fix the problem, you need a keyboard or mouse connected to your surface. Axis like re-vantaging the surface, if the touch screen does not work. If it's a touch screen, if it doesn't work before, go to solution 3.

Tsіkavo technology is implemented in Windows systems. You can program yourself. To give the skin movement is practical whether it is a function or an option.

Ale in multi-touch games reveals its potential. The stench often hits the joystick, on which it is necessary to press a sprat of buttons at once. For example, let's take the Mortal Combat game, it's necessary to press different combinations of buttons to reach the songs, their series and fatalities.

Skip the touch screen settings

The touch screen does not need to be recalibrated, but if you recalibrate it, it may affect your productivity. The axis is how to re-calibrate and re-calibrate the factory for locking, as it is necessary, for the help of the keyboard or mouse.

Solution 4

Enter the calibration, press the arrow keys to see "Calibrate screen for pen" or "touch input", then press "Introduction". Press the “Introduction” button, if the “Yes” button is not selected, press the “Introduction” button and read the instructions on the screen. After that, as your surface can see the recalibration data, flip the touch screen, so that it changes, so that the wine is correct. Go to solution 4. . Axis yak, vikoristovuyuchi keyboard chi misha. If the touch screen, as before, does not work after the remaining updates are installed, try Option 5.

How to convert multitouch on a tablet? Reversing multitouch is easy. Є primitive way. At the checkpoint, start the camera and take a picture. Open yoga and, rozsuvayuchi-zsuvayuchi two fingers on the display, marvel at the increase / change the picture.

To change the presence of more than 2 points of torsion, select one of the special programs. For example, Multi-Touch Tester. There is a small expansion and once it shows the number of possible torks. Krim tsgogo, you can especially marvel at the result, but I’m still sticking around the display.

Solution 5: Reverse the Electromagnetic Reverse

Some other electronic accessories may be attached to the touch screen. For example, stinks can cause the cursor to move unscheduled. Malice can be forgiven in the same way, like a court of power, or a lamp on your table, or else it could be like a great possession or a bank computer.

As the problem with the touch screen is less likely to be blamed on the singing areas, it is possible that you will eliminate the electronic transitions. If you think that the touch screen is reacting to a jump, turn on the extensions in the area, deviate your surface, do not call the docks a problem. If you don’t know there are problems in the room, deviate your surface, turn the sudny kіmnati on the tighter possession, as if you could create electronic transitions. If the touchscreen is still not working properly, try Option 6.

Tablet display calibration

Calibration is needed in order for your gadget to adequately respond to the finger dot. Non-calibration of attachments should be carried out in such a rank. For example, you write SMS, press the letter “A”, and the letter “K” or “E” appears on the display. Not too hard, right?

Solution 6: double-pointing

Twist the whole process of the teeth with two buttons, so that you can switch over that the surface is completely turned on. Once your surface is turned on, immediately press and press the button for increasing the density and the button for reviving for at least 15 seconds, and then let go of the offense. After you release the buttons, check for 10 seconds. Click and re-open the life button to re-enhance your surface. For additional keys with arrows, see “Completed work” and press “Introduction”. . Like a touch screen, like before, not working, try Option 7.

Calibration in Windows

Since on tablets there are a few options for Windows, then there are ways to calibrate the screen of a spear. Vіrnіshe, kіlka svočіvіv, how to spend in a special supplement for tsgogo. For non-standard Windows (such as Windows 8 CP), it is necessary to enable general options. Mayzhe at the very bottom of the window there will be a button. For newer versions, the option is in screen personalization.

Solution 7. Check, update or remove the surface

If you are still having problems with the touch screen, try to fix it, update it, or flip the surface in this order. Checking your surface - a way to tell the rest of the system changes that could cause problems. Upgrading your surface does not change your personal files, or you may see recently installed software drivers.

Other programs and nalashtuvannya call. You can install them after the upgrade is completed. Skip data supports programs installed on the surface. If you have a problem with the exact selection of objects on the screen behind the help dot, you can calibrate the screen display. If the touch screen is badly calibrated, you may not be able to press the "Calibrate" button. Know blocking orientation on tablets. Even though the orientation is blocked, the screen cannot be wrapped between portrait and landscape orientations. Lines appear on the screen along the entire perimeter, which make the box run from the edge of the screen and another box in the middle of the first half an inch from the edge. The lines join in the middle in order with the skin kut. As a result, 16 repetitions. Starting from the upper left kut, vikoristovyte finger or stylus, so that the skin crosshairs stick out, on which two short black lines appear, which make the crossover. Yakshcho tse torkannya is accepted, crossing over to move on the step of the right-hander. No, I will again press on the front peretina. If we cross over, we move, the seen peretina is angry to the right, down, and then again to the left. The process takes more than an hour, read below. Why work, why don't you have a mouse? After that, as you have chosen the skin of 16 calibration points according to your will, you will come to the court if you want to save the data of calibration.

Then choose "Calibrate pen screen" or "Touch input".
Ignore the order selection option as your screen wraps around.

Swipe your finger along the right edge of the screen or move the mouse to the top right corner to open the Chari panel.

Windows 10 changes may be able to change the default screen settings that the system selects for locking. Sometimes in the process of adjusting or changing the monitor, problems can be caused, but they are easy to reverse.

Screen adjustment

The personalization of the screen parameters helps to adjust whether the screen is so that it is as easy to adjust as possible. Remember the orders, as they were indicated before your wedding, so that at the time of the recent changes made, the mother can be reassured.

Regulation of radiance

There are a few methods that allow you to change the brightness: through changing the system settings or for additional screen functions.

Through the screen

Look on the monitor for the buttons for adjusting the brightness and vicorate them to increase or decrease the light. Ale check, these buttons are not on all models of monitors. If you don’t know, vikoristovyte lower ways.

Press the monitor buttons to adjust brightness

Through keyboard buttons

If you turn on the keys for quick access, from F1 to F12, you can know the button that is responsible for adjusting brightness. Press or press to get the result.

This button can be different but not daily or not. At this point, speed up in the following ways.

Vykorist keys for quick access to adjust brightness

Swedish way

Having clicked on the battery icon or the icon next to the reminder, you will click on the “Yakravist” block. Vykorist yogo, so that you can pick up the necessary rye of fieryness.

Click on the battery icon and change brightness

Via system settings

Expand the system parameters.
Open system parameters
Go to the "System" block.
Click on the block "System"
At the "Ekran" depositor, find the item "Riven yaskravostі" and insert a runner. Click on the "Shut down" button.
Marry the bellow for a change of brilliance

Video: how to adjust brightness and other parameters of the screen

Through the installation of electricity

Write “Electric Life” in the system line by line and open the proponed side.
Go to the Electricity tab
Revise your plan.
Press the button "Setting up the power supply scheme"
In the list of parameters, find the row "Yakravist" and marry the bug to the appropriate value.
Adjust the clarity of life parameters

What is robustness, why are the parameters of lucidity inaccessible

Possibly, the screen does not support the change of brightness, but the problem is less pronounced on old outbuildings. The most common reason is the availability of the required driver:

Go to the add-on manager.
Open "Attachment Manager"
Know the division of "Monitori" and spread yoga. If you have the “Universal PnP Monitor” sub-item, click on the new right mouse button and select the “Zadiyati” function. Done, reboot the computer, go to the descriptions of the other instructions and try to change the brightness again.
Go to the monitor and select the function "Zadiyati"
Also, the sub-item "Universal monitor is not PnP" or an icon that indicates the availability of drivers, find and install them manually. To do this, find the site of the monitor's browser, download the new drivers for your model, turn to the "Additions Manager", click on the monitor with the right mouse button and select the "Update drivers" function.
Get and update monitor drivers
Select "Search for drivers on my computer" and complete the procedure, and then turn to the instructions and change the driver. It is possible, at some point, to restart the computer.
Choose a manual search and enter a route to drivers

Video: how to update drivers in Windows 10

Contrast adjustment

Change the speed of colors easier for the help of automatic regulation, you can start it with offensive actions:

Going through the system parameters, wrap the "System" block. Go to additional parameters at the "Screen" tab.
Press the button "Additional screen parameters"
Click on the button "Calibration of colors".
Open the "Screen Calibration" section
Read a few pages of the instructions, pressing the "Next" button right away.
Go through the screen fixing process.
Vikoite calibrated gami
Go through the process of fixing the radiance.
Vikonayte nalashtuvanya yaskravostі
Go through the process of adjusting the contrast ratio.
Vikonayte adjusting the contrast ratio
Go through the process of color balance.
Customize your colors
Save or ask for changes.
Save screen fix results

Video: how to calibrate a monitor in Windows 10

I'm allowed to change

Depending on the size of the screen, to lay down the number and width of pixels behind the displayed image. For the skin model of the monitor, you have your own recommended value of the allowance, which can be recognized in the instructions for the monitor, or by sorting through all the allowances requested by the system:

Video: How to change the screen size in Windows 10

Change of orientation, scale, addition of a number of monitors

Moving to the screen parameters (the first line of the front sub-item), you can change not only the size of the building, but also the scale, why all fonts and icons become either larger or smaller.

Adjust screen scale

The orientation is changed from landscape to book and portrait and navpak. This function will become less profitable in that case, as you have a monitor with non-standard sides, for example, swaying at the height, and not in width.

Choose your preferred orientation

As soon as a monitor is connected to the computer, the adjustment of the skin from them will be fine. Ale, a bunch of them need to be recognized by clicking on the “Reveal” button. When the search is completed, the parameters of the skin monitor become available.

Press the "Reveal" button to recognize a new screen

Troubleshooting with monitor

As soon as the hour was fixed, or the change of the monitor caused problems, then try to put them on your own.

blinking screen

If the screen starts less trouble for the song program or gr it, it means that the program is insane with your choice, that problem is in it. If the monitor blinks constantly, then there may be two reasons: the problem is with the cable or the drivers.

First, turn over, the cable that goes into the monitor and the computer unit was not pinched and not coming out. Select VGA or HDMI cable. Vityagnіt yogo z both roses, connect again and turn around, chi a problem. If possible, turn the monitor around for an additional cable.

Reverse, chi good block and monitor

In a different way, if you messed up, that the problem is not in the cable, please update the drivers:

Games do not display in full screen

Deyakі іgry can be locked at the window, and not on the whole screen. If you want to correct it, there are two ways. The first one is to select the Alt + Enter combination, which gives the command to expand the active window to the full screen, the other one is to enter the setting of the most important value “Vydkrivate in the full screen mode”. Call again another method, which will either immediately open the next screen, or it will only work after restarting.

Turn on the redundant screen mode at the fixed grid

Screen calibration

Tablet bugs when touched by Windows 10 or a digital pen may be stuck because the system does not respond correctly to a finger or a stylus. At this point, you need to go into the calibration of the screen:

Sleep mode deactivation and monitor muting

For zamovchuvannyam, as if the coristuvach does not win 15 quills, the computer vimics the monitor. After 15 minutes, the system is simple to go to sleep. Necessary for saving energy. However, the power saving function can be deactivated or set:

Also, the computer monitor can be adjusted by changing its extension, format, clarity, contrast, and scale. If there are problems behind the screen, change the drivers, change the cable or calibrate. You can also set up or turn off the computer in sleep mode.