Replacing the glass of an iPhone around the display. Replacing the iPhone display edge on the selection Terms, warranty and availability of replacing the iPhone display edge

This service is suitable for iPhone owners, starting from the 4th, who suffered from rejection - the screen broke dryly. On the right, on these models the display is glued together in the factory and it is impossible to separate them when the client checks. It takes a lot of years. Especially for those who do not need terminology and who want to protect, we propose the service with re-glued glass.

If you can re-glue the edge

It is important to know 3 things in which you can replace the edge on your iPhone display:

1. The display has no defects,
2. The touchscreen is working,
3. The display is original.

Service available for models:

• iPhone 4 and 4s;
• iPhone 5, 5s, 5c;
• i 6 Plus;
• iPhone 6s and 6s Plus;
• iPhone 7 and 7 Plus.

The display has no defects

It is important that there are no stains, dark spots, or dead pixels on the iPhone matrix itself.

The touchscreen works

So, it is difficult to verify that if the screen is broken, or if the touchscreen is defective, then you need to change the module.

original display

If you have already replaced the module and you were given an unclear display, then we can replace it with a new module from the original display.

How the process works

Replacing a storage unit with a vibrator takes a few years.

Everything begins when the client brings the device to the service center. The iPhone is disassembled and the screen removed. Afterwards, the brightness and efficiency of the matrix are checked on a test device. Unfortunately, among the iPhone displays there are different parts, copies, unclear analogues and incorrectly updated modules. The master looks at the icons, evaluates the performance of the robot and checks the display for the presence of defects. If you have never changed the display, if you have not disassembled the device, under the broken edge the image displays without any problems and the touchscreen works - you have nothing to fear.

After evaluation, the broken module is transferred to the manufacturer. There the replacement process begins:

• • When heated with a special string, the slope is cut.
  • The matrix is ​​cleaned with glue, placed on a machine with a sticky roller, and then applied manually. These processes are placed in the area of ​​the moved vise to prevent the saw from getting caught.
  • Behind the special devices, a new polarizing and adhesive tape is applied. This process is carried out in a vacuum to prevent wastage.
  • Then, in a vacuum, the blanks are glued behind the module behind the frame.
  • Place the display in a deep vacuum for three hours to allow micro-bulbs to appear in the adhesive ball.
  • At the end, the display is tested, packaged and transferred to the master.

Vicorized stained materials

• Smooth, with oleophobic coating.
• The original plastic frame is on the glass, with fastenings. In most cases, the frame and side are glued back and are exposed to pressure for several years.
• Polarizing spit.
• Optically clear glue.
• Special officers.
• Disposable lint-free pieces of fabric.

Today's touchscreen phones and tablets have a clear screen with a large diagonal. They are comfortable to surf the Internet, play games, launch various applications, watch photos and videos, and read books. All this allows you to operate the display module, which simultaneously includes the display and the touchscreen. This very element is also the biggest part of the phone. In case of mechanical damage, the fallen veins may crack like cobwebs or one unacceptable crack may appear. Previously, in such cases, it was necessary to replace the display module, the cost of which was almost equal to the price of a new phone without repair. At the same time, a similar problem can be solved by replacing only the glass.

What does it look like through the glass?

Separation is a process under the display from the glass, if it is necessary to replace only the glass. All current smartphones are released with glued edges and display. This allows you to change the size of the display module. Navigation becomes more comfortable, and images are clearer and more realistic. Also, all current phone models have a sealed space between these two elements, which is filled with a special OCA glue, which creates even greater aesthetics. Separation allows you to separate the display module into separate components and replace damaged parts.

Depending on the phone model, it allows you to save on average about 1000-15000 rubles for repairs. We can replace the chip on any phone that requires replacing the entire module. The power of such a service is available to everyone and it is much cheaper to put the gadget into operation.

When you need to replace the glass on your phone

1. The touchscreen has broken, cracks, splinters, deep stains have appeared on it, and the screen displays. This often occurs when the phone is dropped or due to other mechanical damage.

2. The sensitivity of the touchscreen has changed or completely disappeared, and blind zones have appeared. You may suffer through a blow, a phone hit in the middle, or a factory defect.

3. The dry slope is covered with a series of cracks, but the touchscreen is still working. Popular phones often have higher rates of abuse.

If you have any of these problems, contact our service center, and we will quickly replace the problem on your phone or tablet. The professionalism of our specialists and affordable prices suit all clients.

How to pass through the glass

This is a complex procedure that only professionals rely on a special technology. The work uses specialized materials and materials. Replacing a storage unit in our service center takes place in several stages:

We take apart the phone or tablet and carefully remove the display.

It is used on a separator machine or a special machine that cools the display to 150C

- Using special means, we remove excess old OCA glue by joining the elements of the display module and removing the exposed space between the module and the edge.

In the saw-free room, a new OCA coating is applied, and a new blade is installed.

We laminate, pump the air in a special laminator under a pressure of 5 atmospheres and collect the air bulbs.

Let's pick up the phone.

After completing all the glass replacement procedures, your display will be back in working order without any cracks, and you will be able to use it comfortably again. The cost of such a repair will be much lower than installing a new display, and in some cases, it will be possible to renew the phone.

Replacement of storage on iPhone 7/7 Plus at a price of 2850 and 3850 rubles for 7 Plus as a company "Display Meister".

Replacing the glass on iPhone 7 with the original

Repair for 40 hvilin

1 rik guarantee!

2 khvilini views
Belarusian

We work from 9 to 21:00 today

If cracks appear on the display of the iPhone 7 or 7 Plus, there is no need to replace the display - just replace just the side.

Replacing the glass edge of the display on iPhone 7, use a special equipment. A number of special tools are being developed.

We took photos of the acquisition and described the process below.

Find our service centers in 2 directions
Belaruska.

It’s easy to find us, on the page there is all the information with the address and pictures.

iPhone 7 and iPhone 7 Plus glass replacement price per original

Our prices are real (spare part + robot + warranty).

🔥 We reduced them by an average of 20%. 🔥

👉 If the number of new clients does not increase, we will certainly incur excessive prices. 👈

Repair in front of the client

River guarantee

The act of viconny robіt

Cash check

Get a clear service from professionals at the lowest price in Moscow!

The price is residual without any additional payments.

Our price of 2850 rubles is one of the lowest in Moscow.

cancel your application whole lot for 2850!

• Our reputation. Read about us on Yandex or in any other place.
• Yakisna and Shvidka service. The average hour to repair one extension is 40 minutes.
• Guarantee 1 rik. These are not empty words.
• Cost-free diagnostics. We do not charge a penny for client consultation.
• Nice prices. We aim to trim prices at a low level. The service does not pretend to be kind.
• Openness and honesty. The skin client can contact the kerivnik.

How to go about replacing the glass of iPhone 7 and 7 Plus?

Replacing the glass of iPhone 7 and 7 Plus is done in a saw-free room with antistatic coating.

Service center for supplying all necessary equipment.

Using a special cutting machine, cut the bevel out of the matrix. First we warm up the module on the separator. We clean the matrix with a special cleaner.

A tool for gluing the OCA melt and polarizer onto the matrix is ​​installed.

To glue a new iPhone glass with a Vikorist matrix, a “Vacuum press” is used. This is a hermetically sealed container in which a vacuum is created and the required temperature is created. This edge adheres perfectly to the matrix.

The matrix is ​​difficult to glue in an autoclave. There is a high pressure and temperature.

What is the iPhone 7 display module composed of:

To understand how to replace the glass of an iPhone 7 Plus, you need to understand the display module.

• Sklo. Only cancels the function. It cracks on impact.
• OCA spit. Glues the edge and the matrix.
• polarizer. Make the image visible to the eye.
• Sensor. Recognizes pressure and torning.
• matrix. The most important part of the module. Converts electrical impulses into images.
• subswitching. You will take part in adjusting the brightness of the screen.

Replacing the iPhone 7 and 7 plus will not help you, because:

• Chi does not use 3D Touch- don’t talk about those that have a damaged sensor. Incorporation into the matrix. It cannot be repaired.
• Bit pixels are visible- this means the matrix is ​​zipped.
• The image is dark- since it is not possible to add brightness, this means that there is no need for additional lighting. You can also remember this.
• Send vertical smudges- this means the matrix is ​​irrevocably sealed.
• The sensor itself asks- Viyshov is happy with the 3D Touch controller. You won’t be able to remember him.

These signs indicate that the module has become unattributed. In this case, it is not possible to replace the glass on iPhone 7 - you need to replace the entire module. It will cost you the same amount.

Customer nutrition recommendations

Is it possible to replace the glass on an iPhone 7 with a phone number?

We can send the master to you with a new original module. You can replace the iPhone 7 display with a new one, and pick up any broken parts from the workshop. This way you will save your time - you will not have to go to the service and check while your iPhone is in use.

Come to our service center at the address: Moscow vul 1 - a Tverska - Yamska d 29 building 1.

Khvylina view
Belaruska. We work Monday - week

Telephones often fall down, as the tendentious part itself hits the ground. It would seem that there would be no problems in replacing the disc on your phone, but in practice everything is not so simple.

Previously, the price on the phone changed rapidly, and the coins were lost. It's inexpensive to buy, but with the advent of touchscreen phones, the replacement procedure has become significantly more complicated. What is the immediate cost of replacing the phone on a robotic phone?

If you have a touchscreen phone and a new broken edge requires replacement, then you need to know:

Today there are two types of touchscreen phones: those phones that have a sensor connected to the glass, apparently change the sensor, and the quality of touchscreen glasses is also significantly higher, since moisture is present here and a touch panel with a cable, which The connector connects to the motherboard of the phone. And yet, replacing the touchscreen is not as expensive as replacing the sensor on more expensive models.

Nybilsh is stuck a model, the flagship of the compound, the yak iPhone 4, the iPhone 5, Samsung Galaxy S3, Galaxy S4, HTC ONE, Nokia Lumia 920, Sony Xperia Z INSHIK, May BLLSH BLAST FROM BELISTENT give a lcd display, Yaki It is strong and transmits images, the sensor (touchscreen), which indicates pressure, and is of a dry and decorative nature. In which the screen module is intact, the components are glued together industrially, and the screen is completely replaced according to the instructions of the generator.

The procedure for replacing the storage unit.

Prote, it’s hard to remember. The procedure for replacing the glass on top-model phones seems to be straightforward: the display module is heated using a special hair dryer, or a special heating pad, the glue that is glued to the sensor, softens, then with the help of a knife, a thin plastic spatula, gral card, special Molybdenum dart and the like are difficult to come out of the screen. Then the excess glue is cleaned up using a special dispenser, scraper, server, soft cloth, etc. The new one can be installed either with double-sided tape or with special UV glue (similar to the factory one).

In the description it looks simple, but in practice everything is far from being so.

First of all, it is very difficult to achieve uniform heating of the surface of the display module, there is a danger of overheating the display and sensor, after which either the image will disappear or the sensor will not work correctly. This can appear either immediately or within a dozen hours.

In other words, it is difficult to avoid problems only if there are one or two large cracks on the surface, but if there are cobwebs from smaller cracks on the surface, it is likely to crack, and the fragments can easily damage the sensor, and as a result, everything will have to be removed entire display module. Also, after an impact, there may be microcracks in the display, which do not show up before the procedure, but when heated and/or the pressure on the display can lead to the failure of the LCD display itself.

Thirdly, cleaning the sensor with glue is also not necessary for the phone; the glue is removed with a scraper or cloth. The sensor may get a serious spill, which can also lead to failure.

Well, you will decide, in most cases, it is difficult to install a new layer on double-sided tape, sticking it around the perimeter of the screen, it is impossible to ensure a strong fit of the new layer, over time, the saw will become too heavy, and the tape itself may come off.

To put a new layer on the glue, not everything will sink in; you only need a special glue, probably German, and also an ultraviolet lamp (the principle of hardening the glue is like in the dental office, when placing a photopolymer filling), and it must be specially equipped Do not place the display or the slope to ensure 100 % more accurately hit the spot.

The work of replacing the glass takes up to three years, it is extremely small and requires a highly qualified master. If this is not the case, then the master confirms that it is impossible to explain to most clients. There are no guarantees for the successful outcome of the operation.

Most professional experts will tell you that the system will not change, and recommend replacing the display module as a whole. Of course, you can find a master or service where to take it, but be aware that the tables there are changed in an amateurish way, the probability of success is 50/50, the probability of further success and savings I see the phone is even lower.

What our service center says:

1. Professional replacement of Samsung Galaxy glass at a price of 3,000 rubles (with warranty). Phone ready in 1-2 days.

Note: Evidence shows that in 99% of cases, the damage on the phone can be remembered, while saving the phone's new appearance ranges from 85 to 100%. Statistics on the further usefulness of the display and sensor have not yet been accumulated (secondary data on people who were replaced have not yet been collected).

2. Sami warehouse for Samsung, Nokia, iPhone, HTC - you can buy it from us and replace it yourself, or go to those who are willing to replace it cheaper from us.

3. We recommend replacing the display or touchscreen at the same time: in this case, you are guaranteed to get the lowest price for replacing the screen in place, with the cost of original spare parts and greater cost savings And it looks like a new phone.

If anyone has a chance, please tell me! We are confident that the information provided will help you make the right decisions.

Also, whenever you need glass replacement for Samsung, Nokia, iPhone, Sony, HTC, LG, Fly or other phone models, please contact our service!

Dear friends, from now on we strive to reduce the cost of repairs and provide you with the most efficient repairs for minimal effort and time. That's why we now have a new service available - replacing the glass on the iPhone display.
It is impossible to call such a service “new”, even though some companies have been doing it for a long time. But the problem is that not everyone, but only a few can change the slope of the display :)
We have found a solution to this problem and are ready to share it with you. Now let me tell you about the mind of the re-glued glass and in some situations it is possible.

How is re-gluing done?

The display, touchscreen and keyboard on iPhones are a complete spare part. This means that they are glued one by one over the entire surface with a special glue. Therefore, before the display breaks or the components are changed only at once in the assembly - the display module. We immediately started working with dekilkom warehouse workshops for re-glued glass windows. For you, this means that since the display and touchscreen on the phone are always working, you can completely protect and replace not the entire part, but just a few.

What types of folds can be re-glued?

Only original display modules or updated originals are suitable for re-gluing. This is due to the fact that on the originals the touchscreen (sensor) is located on the display itself, and can hardly serve as a protection device. When updating the display module, the broken edge is simply cut off, the display is cleaned with glue and a new edge is glued onto the new one.
Copies cost a lot to everyone. The touchscreen on them is most often located on a surface, so it is impossible to cut off the surface of the touchscreen using the factory method and restore the module in this way. Plus, the display-copy of such displays is more screaming and crumbling than usual, so the cutting of such displays is often simply not worth worrying about. If you already have a copy and it is broken, then in such a situation you will have to change the slope and the entire display, such a module cannot be updated.

Another important point when re-adhesive is the clarity of its functioning of the touchscreen.
Since your broken module has a glass sensor that works perfectly and has no “dead zones,” then such a display module can be renewed. Since the sensor does not work in certain places, but presses on the icons on its own, then such a module cannot be updated, since the touchscreen is located on the display itself.

The fourth reason is the integrity of the touchscreen and display cables, as well as the very presence of damage on the display itself. In other words, if the display does not have yellow or black spots, broken pixels and different colors, then such a display can be renewed.

Terms, warranty and availability of replacing the glass of the iPhone display.

Guarantee for warehouse re-gluing 30 days does not depend on the model of your phone. In essence, all functional components are lost from you, and if they worked correctly, then so be it. In any case, you will have a 30-day guarantee for re-bonding the module and if there are any problems with the touchscreen or display, we will replace it with a new one without any damages.

How can I speed up the re-gluing process?

For many of our clients, time plays a very important role and there is no possibility of waiting 1.5 years until the edge is broken and re-glued on a new one. This moment was conveyed to us in the same way and we can repeat it here ;)
If the display and touchscreen are still working, then within 1.5 years we can install the display module of the original frame and get the following price for repair:

• iPhone 5, 5S, 5C, SE - 500 rubles;
• iPhone 6/6 Plus - 1000 rubles;
• iPhone 6S / 6S Plus - 1000 rubles;
• iPhone 7/7 Plus - 1500 rubles;
• iPhone 8 / 8Plus - 3000 rubles.

We hope that now absolutely all of our clients will be satisfied :)

What can we put in your pouch?

We have provided you with 3 storage replacement options:

1. If the touchscreen display is intended for full operation and you want your display to stand up, then we can re-glue just one side. In an hour the loan will last about 1.5 years.
2. If the display is intact and working, but you do not have 1.5 years left to work on, then we can supply you with a new display module for 25 rubles. You will deprive us and us of a good discount - about 500 rubles.
3. If your screen is broken and cannot be repaired, then you can only replace the display module assembly.

You can find out the prices for replacing the glass of your iPhone on the iPhone Repair page by selecting the model of your phone. All quoted prices are final and include spare parts and all labor required to replace them. No further repairs!