Firmware for Samsung Galaxy Note N7000. Firmware Samsung Galaxy Note N7000 Samsung Galaxy Note N7000 original firmware

There is no official Android 4.3 firmware yet, but we can protest CM10.2 (Android 4.3)!

Respect! All operations with the firmware of your device are performed at your own risk! We will not be responsible for anything that happens to you or your device through the following information in your account.

Preparation before flashing:

  • The firmware is only available for the Galaxy Note N7000. Be gentle, do not try to install it on other devices.
  • Check whether the drivers for your device are installed on your computer.
  • The firmware will remove all your data. Proceed at your own risk.
  • You will need to turn on the USB setup mode, which is what you're supposed to do.
  • Your smartphone is responsible for charging at least 70-80% charge.
  • First of all, make sure you make a backup copy of all data in your phone memory.

Instructions for installing Android 4.3 ROM on N7000(Note 1):

  1. Download Android 4.3 CM10.2 ROMі Google Appsfor Galaxy Note N7000 to computer.
  2. Connect your smartphone to your computer using an additional USB cable.
  3. Now download the downloadsAndroid 4.3 ROMand Google Apps files on the SD card. Check to see if the files are in the root directory of the SD card (and not in any folder).
  4. Then turn off the phone and connect the USB cable.
  5. Now select Recovery. Hold down the phone, pressing and pressing the Humidity Up + Alarm + Lively buttons at once until the screen starts to fade, and release the three Todo buttons. After a few seconds, the phone will go into update mode.
  6. To update, create a Nandroid backup by selecting:Backup and Restore ››Backup.
  7. Select: Wipe Data/Factory Reset ›› Yes.
  8. Go back to the update menu by selecting: ›› Go Back
  9. Select: Wipe cache partition ›› Yes.
  10. Select: Advanced ›› Wipe Dalvik Cache ›› Yes.
  11. Select: flash zip from SD card ›› choose zip from sdcard ›› Android 4.2.2 ROM ››Yes.
  12. Select: flash zip from SD card ›› choose zip from sdcard ›› Google Apps ››Yes.
  13. Select: Go Back ›› Reboot system now.

That's all!You now have CM 10.2 Android 4.3 ROM Jelly Bean on your Galaxy Note N7000.

Galaxy Note N7000 owners can now enjoy the latest KitKat features with the fast and highly stable release of Android 4.4.4 based on the C-ROM build of 7.1 from commercial C-ROM retailers.

Custom ROM C-ROM compiled 7.1 based on the latest AOSP release. It will bring many new features with a buttery-smooth interface on the remaining KitKat firmware.

Features of Android 4.4.4 C-RoM Build 7.1

A short list of the main features ported to the latest Android 4.4.4 C-ROM firmware:

  • Pyrig
  • Halo
  • App Bar
  • Dark C-ROM
  • Active display
  • Floating windows
  • Gesture Kudi zavgodno
  • On-The-Go Mode
  • Animation keruvannya
  • Note LockScreen
  • Implementation of App Sidebar

Dedicated users can flash the Samsung Galaxy Note N7000 by following the steps below.

IBTimes UK reminds us that we are not responsible for any damage to the device either before or after installing the firmware. Koristuvachs are advised to stay away from moisture.

Foremost mind

  • ROM and instructions provided in this guide are valid only for the Galaxy Note H7000 model. Turn over the device model, go to Settings > About phone.
  • Take a backup copy of your data and set up, use the recommendations of an update tool such as ClockworkMod (CWM) or TWRP, which creates a complete image of the existing phone settings. From the Recovery menu, select Backup and update and click Backup.
  • Make sure you have USB drivers installed on your computer.
  • Make sure your phone is in USB mode by navigating through the Settings menu > Device Options (NOTE: Press the number of your phone this time to unlock or display the device settings in the Settings section bath.) Then select the order to turn on the comfort mode USB.
  • Make sure that the phone has 80% battery charge to prevent the device from running out of power (at the expense of battery power) while the ROM is installed.
  • Please check that the device is unblocked (not tied to a specific operator) and is rooted by installing the remaining ClockworkMod (CWM) Recovery (v6.0.4.5 or higher). If you are installing the CWM updater for the first time, please see the video guide below:

  • If your device is stuck on a backup or has problems with the download cycle, clear the cache partition and Dalvik cache a few more times before restarting.
  • Allow the new rum to stabilize with a stretch of five wines, first begin to drink on the new one.

Necessary attractions

- Firmware Android 4.4.4 C-Rom
– Sumisni Android 4.4.4 KitKat Google Programs
– Philz Touch Recovery v6.07.9 (CWM Recovery 6.0.4.5 -> save .tar file via Odin v3.09)

How to flash Samsung Galaxy Note N7000 for additional firmware Android 4.4.4 KitKat C-Rom

Krok 1– Download Android 4.4.4 C-ROM.

Croc 2– Connect and mount the device from your phone to your computer using an additional USB cable.

Croc 3– Now copy the downloaded C-ROM zip file to the root folder on the phone’s SD card.

Krok 4– Turn off the phone and connect the USB cable from the computer.

Krok 5– Now turn the device on to the update mode by pressing the main button at the same time.

Krok 6– Once your phone has reached CWM Recovery, exit the data reset by pressing Wipe Data/Factory Reset. Use the navigation keys to navigate between options and the Live button to select an option in Update mode.

Krok 7– Then check the cache partition and check until the process is completed.

Krok 8– Vikonite also delete Dalvik cache. To get started, go to the 'advanced' option, and then click on Dalvik Cache. This will help avoid the problems of cyclical attractions or any other attraction problems associated with software installations.

Krok 9– Then go back to the main update menu and select Insert Zip from SD card.

Krok 10– Now press Vibrate Zip from SD card. Use the keyboard shortcuts to navigate to the C-RoM zip file that you previously copied to the SD card of your phone and select it by pressing the Live button. Confirm that the disk is inserted on the front screen and the installation process will begin.

Krok 11– Once the installation is complete, go to the “+++++ Turn +++++” section and select the system restart menu.

Of course, anyone who doesn’t want to wait for the official update of the Samsung Galaxy Note to Android 4.0 needs to flash their smartphone today. Axis and having finished writing this short instruction, so that the skin you need will be able to do it successfully. I sincerely express your respect that all manipulations with your beloved phone are carried out at your own risk and risk, and neither I nor anyone else will bear responsibility for any immediate review.

Rest assured, everything is not so scary, and after spending about 15 hours of your time, you will receive updates, the wonderful Android on your smartphone and a bunch of powerful goodies.

First events

Then, taking the smartphone in your hand, immediately copy it to the folder efs at the right place. So, if you happen to use “full wipe”, you will need to save all the necessary data from your phone, create a backup of SMS, contacts, and any other necessary files, add-ons, etc. You can still create a vikory utility.

Preparation before flashing

  • The firmware itself, for example

We unpack the entire package into any folder on the PC, and take from the table (box, drawer) a cable to connect the phone to the computer. Now you need to download the firmware file in the archive to the root of the memory card, in this case it is called ICS_Stunner_1.4.26.1.zip.

Technical process

  1. We connect the smartphone, connect the cable to a new PC, and put it in “download” mode. To do this, you need to press the keys at once: up, down and the center button. The robot appears in green color.
  2. Then you need to run the program itself for the firmware, and the file itself Odin3 v1.85.exe From a previously enchanted set. In Odin you can’t change anything, just select the file CHAINFIRE REPACK I9220LP1-N7000-ICS-REPACK.tar in the PDA item. That’s it, now with a firm hand we can stamp “Start”.
  3. We check for the completion of the process, after which we re-lock the smartphone.
  4. We go into recovery mode and select the “wipe data/factory reset” item there. Find out all the data on your smartphone! It’s not too much, it’s just too much, it’s like “cleansing the brain.”
  5. Select "install zip from sd card" and select the previous firmware file on the memory card, select it and confirm. The process takes a little more than a minute.
  6. Select “reboot system now” and install the flashed smartphone.

Video: Samsung Galaxy Note firmware for Android 4.0.4

Research team OmniROM don’t sit with your hands clasped: hotch dana custom firmware younger than the rest, but will not sacrifice anything to competitors. I am also pleased with the efficiency of the work of the creators OmniROM. The beginning of a well-groomed robotic team for all rulers Samsung Galaxy Note N7000 It became possible to upgrade your smartphone to the latest version of the operating system – . Below you will find a report describing the entire procedure, including the preparatory stage, as well as the update sent to the downloaded file Google addendums.

Firmware OmniROM KitKat based entirely on AOSP Android 4.4, and at the same time there are a number of unique features, including a small leaking window for input connections, permission to work for skin edema programs, variable adjustment speeds, support for one-hour work How many days? Full description of current features OmniROM you can know .

Okremo varto zaznati, scho OmniROM KitKat Nightlies– a valuable balance, and therefore, it is still possible to avenge low bugs and fixes. How will you shut up with them, putting poshity on your Galaxy Note, you can send it to retailers OmniROM small sound. This will allow you to quickly remove the stable version of the firmware.

Now let's move on to the next stage:

  • Vikorist this guide only for Samsung Galaxy Note with model number N7000. The installation files posted in this post are suitable inclusively for the given device.
  • On Galaxy Note must be rejected root access then install the remaining version CWM Recovery.
  • For installation OmniROM KitKat Nightlies need to earn money Factory Reset This means that all information that is stored in the system partition Galaxy Note will be seen. In this case, the external and internal tendon will lose its imperfections.
  • Create backup copies of programs, settings, text messages; Synchronize the list of calls with Gmail.
  • On Galaxy Note turn off USB enhancement.
  • Create Nandroid backup. Allow it to be updated to the current version of the firmware.
  • Be respectful and careful, do not skip the points indicated in this manual and do not interchange them.
  • Charge the battery Galaxy Note.
  • Do not forget that all responsibility for carrying out the procedure falls solely on you.

1. Pretend the remaining version OmniROM KitKat Nightlies .

3. Connect your smartphone to your PC and transfer the files to a new one. Do not unpack the archives.

4. Press Galaxy Note N7000 from the PC and turn off the device.

5. Seduce your smartphone recovery. For whom it is necessary to squeeze and squeeze Volume Up, Home and Power docks on the screen do not appear on the screen recovery.

6. Now, if you recovery, create Nandroid backup: option backup and restore. The extracted file must be named and saved in the internal storage.

7. Now you need to select from the main menu wipe data/factory reset and confirm the beginning of the process.

8. After this, you can proceed to install the file update. Select option install zip from sdcard, and then choose zip from sdcard, find OmniROM KitKat Nightly zip and confirm the installation process.

9. After the update file has been installed, add the same steps (8th point) to the file Gapps.

10. Having installed the files, go back to the main menu.

11. Re-vantage Galaxy Note N7000 in normal operating mode. The first attraction can last longer than the initial one - 5-10 minutes, so there’s no point in panicking. If your smartphone is still frozen, you need to turn around to recoveryі re-execute the entire installation procedure. This didn’t help, because you don’t need the new firmware - you can speed up Nandroid backup.

Despite the fact that the third generation of Galaxy Note smart phones is already on sale, the first version has not yet lost its relevance. Even though the Galaxy Note turned out to be a good product, it is still losing one of the most popular Android devices. And you will be welcome, but the CyanogenMod distributors have released firmware based on Android 4.4 KitKat. Before speaking, we hope that Samsung will soon present the official version of Android 4.4 KitKat firmware. If you want to check the new version of the operating system on your Galaxy Note before the official release, you can follow the instructions on how to install CyanogenMod 11 on your smartphone.

Obviously, the simplest and most reliable way to find out what's new in the upcoming firmware is to use a custom built version of a verified retailer. We trust the CyanogenMod team and have already released a version based on Android 4.4 KitKat. Is there already a number of firmware versions and why do I need to check the software? As a rule, early versions of custom firmware are very buggy, so be careful in your choice and if you have sufficient evidence, you can risk it. Therefore, we recommend the remaining version of CyanogenMod, which is the best of all custom firmware for the Galaxy Note.

As you know, CyanogenMod is a manufacturer that produces firmware with a large number of functions that work on all types of smartphones - on top-end, mid-budget and low-cost budget phones. Now the CyanogenMod team is actively releasing firmware based on Android 4.4 KitKat, which has already become a series of CM11 firmware. Therefore, this instruction is intended to familiarize you with installing unofficial firmware CM11 Samsung Galaxy Note N7000.

Since this is an unofficial release of CyanogenMod 11, after installing it on your Galaxy Note, there may still be a number of bugs and problems, but all the same, the system is suitable for the corrupted version. Of course, soon all the bugs will be corrupted and the stable final version will be released, so we will be in the know if the newest version of CM11 Android 4.4 KitKat is released.

As of now, CyanogenMod has a number of functions and capabilities that you can now literally run on your Galaxy Note. In addition, CM11 is based on Android 4.4 KitKat, which will allow it to reach the still few customers who are familiar with the new operating system and all its accessories. In short, with CM11 you can improve the characteristics of your Galaxy Note, so as to increase productivity and hours of autonomous work, speed up the use of web pages and smooth browsing, and, of course, you will quickly use the interface of the client, which is not Disintegrated as pure Android 4.4 KitKat interface

If you want to speed up this instruction, go through the advanced stages right away. Please note that without preparing your smartphone, you will not be able to upgrade to Android 4.4.

  • your smartphone is running with root rights.
  • Your Galaxy Note is also guilty of installing a custom recovery; Please install the remaining version of CWM or TWRP Recovery, as there is a problem with the CM11 firmware.
  • Make a backup copy of the data that is saved on the internal memory of your Galaxy Note, so during the flashing process you will need to clear everything. Check out the possibilities of covers for creating backups or special programs, which are available in abundance on the Google Play Market.
  • Make a Nandroid backup just in case you don't like the CM11 platform and you could switch to the previous firmware without a headache.
  • For additional help on your computer, deactivate the security protection immediately.
  • Make sure your computer recognizes the Galaxy Note so that all the necessary drivers are installed.
  • On a smart phone, in the settings, increase the “USB debugging” option in Menu/Settings/Retailer settings.
  • Reverse the battery position on your Galaxy Note. If the battery is charged less than 60%, then charge it before starting flashing.
  • Follow the instructions if you have the Galaxy Note N7000 version. This firmware CM11 Android 4.4 KitKat is compatible with this version of the device. If you don’t follow everything that is written in every step of the instructions, then you will have a great chance of getting away with the Galaxy Note.

Please understand that no one can give a full guarantee that everything will be successful, as long as you follow the instructions to the best of your ability. Also, flashing the firmware will increase the healing value by 1, which will prevent you from having any guarantees. If you recently bought a Galaxy Note and the seller’s warranty is still valid, you can reverse your warranty on backup creations or simply by installing the official stock firmware. And don’t forget that you are revoking root rights, which means you will have to install all updates manually.

Installing CM11 Android 4.4 KitKat firmware on Galaxy Note N7000:

  • 1. Here you can find the latest firmware CM11 Android 4.4 for the Galaxy Note N7000.
  • 2. As soon as you can, you can download the GAPPS software package.
  • 3. Save the files on your computer so that the smell is visible, but do not unzip the archives!
  • 4. Connect Galaxy Note to your computer.
  • 5. Make sure your computer recognizes your device.
  • 6. Copy the files you downloaded for time 1 and time 2 to the Galaxy Note microSD card.
  • 7. Once the copy is complete, exit your Galaxy Note from your computer.
  • 8. Shut down your smartphone to enter recovery mode.
  • 9. To put your Galaxy Note into recovery mode, press and hold the Volume UP button, the Home button and the Power button for an hour.
  • 10. Then, in cover mode, you need to select the “wipe data factory reset” item.
  • 11. After that, select the “wipe cache partition” item there.
  • 12. Go back through the menu, select advance and wipe dalvick cache.
  • 13. Go back to the main recovery menu and select the items “install zip from SD card” and “choose zip from SD card”.
  • 14. Select the CM11 firmware file and install it on the Galaxy Note N7000.
  • 15. Repeat this process, this time with the GAPPS file.
  • 16. Finally, you need to select the “reboot system now” item.

The axis, in principle, is all. Now, be aware that the system may continue to recover for a long time, if your Galaxy Note is stuck at the recovery stage, then you will have to restart the recovery mode and do a wipe data factory reset and wipe cache partition. In addition, if you do not need the new CM11 firmware, you can use the “backup/restore” menu again for additional recovery if you have created a Nandroid backup.

You have now installed Android 4.4 KitKat CyanogenMod 11 on your Galaxy Note N7000.

Did you know the deal? See and press Ctrl+Enter
Application © 2022 Mobile and computer gadgets