De vimikach of the dartless mesh. How to enable the wireless connection function on a laptop: instructions for use. Setting up Wi-Fi on different versions of windows

What can be simpler, lower connected to a wireless Wi-Fi network? Ask to enter the password and check the installation of the password. Sound like this and it will sound, but if it works, if the connection is wired (without access to the Internet) or the sound will not be restored? Let's talk about the causes, through which they blame similar troubles, and about those who fight with them.

Why Windows 8 doesn't download WiFi networks or it can't connect to them

Computer or laptop under Windows 8 don't download Wi-Fi for the following reasons:

the WiFi adapter is not installed, the connection is not working or it is not working;
in the system, the daily driver of the dartless mesh;
on the computer, switching on the mode “At the light”;
in the zone of your accommodation there are no available access points for dartless networks;
access point (routeless router), if it is enabled, disabled, configured incorrectly, or faulty;
standards for computer communication and access points are not mutually supported;
there are attachments nearby, which create a radio signal;
WiFi adapter works in monitoring mode.

As if the border is visible, but the connection is not created, but is bordered:

access to the Internet for this measure, not to build or to fence;
connection to the fence is surrounded by an administrator;
the access point is not aware of the request through the overvantage;
Incorrect access point settings are found.

Required connection to a dremelless tether

Revіryaєmo fringing adapter

Stationary PCs should be sold without wired WiFi adapters, so for connecting to wireless wires, you have to buy and install an OKremo adapter. For example, like in the picture.

For a laptop, a Wi-Fi adapter is not required - it is in the middle.

In order for the laptop to instantly be able to connect to the wireless network and connect to them, WiFi must be turned on. On some models, for which there is a jumper or a button on the case.

On other victors, there are two keys Fn + F1 ... F12. For the inclusion of the droto-free adapter, the key from the image of the antenna is displayed.

If the WiFi adapter is enabled, it is guilty of appearing in the Windows 8 Appliance Manager. To change it, start the Manager from the context menu of the Windows button (Start)

and open the list "Merezhe adapters". If your adapter is in this list, it means that the system recognized and installed it. As if the wine appears as an unknown attachment - go to the site of the yoga maker and install the driver.

As a connection adapter, but the system does not bug out, make sure that the activation is in the BIOS.

The option, which vouches for the operation of the built-in WiFi, is called OnBoard Wireless LAN or Wireless LAN support. Її the meanings are guilty buti "Enabled" (enabled).

If not, you should change your mind that the droto-free adapter does not change from the monitor mode. If you want to win this mode, you need to know about it (when installing a special driver).

Checking the access point

If your PC or laptop doesn't have a home hotspot, try connecting to something else. For re-verification, you can win social media, for example, in cafes or in parks, or in private - with your friends. To convert a stationary computer without being at home, you can temporarily create a virtual access point on another annex.

If there are no connections anywhere - problems are found in the adapter or WiFi settings on the computer, and if there is no connection to only one access point - the problem, apparently, is in no.

Steps of diagnostics (as the previous step didn’t graft to the end of the problem, go to the offensive):

Check that the access point is turned on and the signal is being monitored (depends on the indicator light of the wireless network).

Change, that there are no attachments with a router and a computer, that they create electromagnetic transitions - radiotelephones, micro-furnaces, hard power cables. Try moving the access point closer to the PC to improve the signal.
Unmute the router and re-mute. In order to avoid problems - just drop it off: with a welcome object - with a toothpick or a violin, press the recessed Reset button, so that you can find it on the back or bottom side of the fixture. After manipulation, all settings will be updated before the purchase.

Change the frequency channel of the movement. Connect the computer to the access point for an additional cable, see the menu for adjusting the wireless mesh, find the option " Channel»Move to another channel. It is possible to be inspired by some of them.

In this menu, flip the “Get SSID” setting and, if it is active, select “Hi”. Attaching an SSID to include the movement of the name of the link - such a link is not displayed in the lists of available connections. Also, turn on the support of the standards of the wireless connection b / g on the switch, so that the Wi-Fi adapter on your computer works on one of them, and the access point - on the other, for example "a", such as "b" and "g" do not support.

If a lot of attachments are connected to the access point at the same time, it can stop being connected through revantation. Budinki such situations are small, but they often trapleyatsya in organizations. Try to connect to another, less zavantazhenoy merezhі, or try again in a deyaky hour.

Revisiting Windows 8

Mode "At the litaku"

WiFi can be lost through those that are short by activating the “At the fly” mode in Windows 8 - in this mode, the fencing adapter will blink and the computer will not run on the fringe. It means that the problems are effectively blamed through the name, in addition, the icon of the link in the system tray - it looks like a hatch.

To exit the user mode in Windows 8, open the merging Charms bar and click the Settings charm button.

Next, click "Change computer settings".

Reconsider that Windows is re-booting WiFi, and the icon of the border in the tray has taken on a huge look.

Merezheva diagnostics

Windows 8 has a tool that automatically diagnoses connection problems. The vin is called "Windows Merge Diagnostics". This tool should be able to download and use a rich code for WiFi robots, for example, if it is connected, but the computer does not go to the Internet (connection is connected) or the Internet is, but access to the site is closed.

If the connection is fenced, the icon of the fence in the tray is marked with a hail sign.

To start the Windows 8 measure diagnostics, right-click on the end of the measure and select "Troubleshooting" in the menu.

The utility to check all the data on the computer and determine if there is no access to the Internet. Local problems, if they can be corrected, will be solved automatically. And if you don’t get connected, for example, through problems with the access point or problems on the provider’s side, the information will appear at the window with the “Not corrected” sign.

As for the PC, there is a connection, only one of them is covered, otherwise the diagnostics should not cause problems, you can predict only a few. To do this, go to the "Center for Management of Merezhevy and Global Access" and go to the folder "Merezhevі connections" (click in the transition panel "Change adapter parameters").

Open the context menu of the connection, like an exchange, and press "Diagnostics".

WLAN autoconfiguration service

Problems with connections are blamed even after the faults of the merging services, which became vague or through ignorance. For the WiFi robot in Windows 8, the WLAN autoconfiguration service is enabled. As a matter of fact, the Ethernet connection is not surrounded by anything, and the system simply does not run out of service without a connection.

Open the "Services" program: open the context menu of the Windows (Start) button and click "Vikonati".

Dali dial in a row "Vіdkriti" team services.msc and press OK.

Find WLAN autoconfiguration in the list of Windows 8 services, open the menu and select "Power".

To start a service, press "Start", and from the "Startup type" list, select "Automatic".

In order for the WLAN Autoconfiguration Service to start, it is necessary that another service, the Windows Connection Manager, works. Find її in the same list and install їy similar settings.

Other parameters of the WiFi connection on the PC do not require manual adjustment. All data for Internet access - IP, gateway addresses, DNS, etc., the network is taken automatically from the access point's DHCP server.

Vlasniki laptops sing vikoristovuyut for access to the Internet without a root connection, since the Wi-Fi adapter is on all models of laptops without a fault. However, to speed it up, sometimes you have to figure out how to turn on wifi on your laptop.

Shvidky access or hardware jumper

We need to physically turn on the Wi-Fi adapter. On different models of laptops, the procedure is trochic, the prote sense is the same: it is necessary to sound the hardware jumper or speed up the function keys. Let's take a look at the sprat of applications:

You can continue to enable Wi-Fi for a long time by following the methods for MSI, Acer, Samsung and other brands. Navіt raznі іnі ї ії ї ї іn vyrobnik іnіt vіdmіnі vіdmіnі vіdmіnі і іnіtії іnіnі way to activate the module without dart, to that:

Look around the case of the laptop for the presence of a hardware jumper or Wi-Fi on button.
Turn off the keyboard - one of the keys in the F1-F12 row is guilty but is marked with the icon of a non-rotor lock. If you press її at the same time with the Fn button, the adapter will turn on or turn off.

If you have a Sony Vaio series laptop, then there may or may not be any hardware keys or Fn buttons on your keyboard. For Wi-Fi robots in such a situation, a special VAIO Smart Network utility is needed, you can find out how on the official website of the wizard.

Fn button not working

What's the problem, why doesn't the Fn button work? How to turn on the adapter in such a vipad? The back needs to be broken, why the key does not work. Fn works under BIOS controls and can't control the utility, without setting which key does not function. Because the button does not work, it is necessary to know on the website of the search engine for a specific laptop model a utility for enabling hot keys (there may be the word “HotKey” in the name).

If the installation of the utility did not help, or the key was disabled physically, then you can speed up by an alternative method of turning on the adapter. On Windows 8 and Windows 10, to turn on the adapter, click on the Wi-Fi icon on the alert panel and turn the “Rotless Wire” button to the active position. If the adapter drivers are installed correctly, then the icon is to blame for the language boot.

Windows 7 does not have such a function, but you can try to enable wireless connection via changing the adapter parameters (read below for details). If this method does not help, then you can use the same keyboard with the Fn working key and then do not disable the Wi-Fi module anymore.

Setting up Wi-Fi on different versions of Windows

With the physical inclusions of the module, you will be able to finish the shvidko. Sometimes the Wi-Fi setup ends: otherwise, the system will vibrate independently, displaying a list of available wireless hotspots. Ale decals have to be installed manually.

Depending on the version of Windows, you need to double-check that the Wi-Fi module drivers were installed without pardon:

To be sure, it's better to go to the official website of the laptop manufacturer and find out the remaining version of the driver for the driverless module for your model. In addition, click on the adapter with the right button and select the item "Zadiyaty" (like the yogo robot Zupinen).

Windows XP

As an idea, Windows XP has long been guilty of ceasing to be corrupted, but on some old models of Dell and other laptops, the legendary system still continues to win its functions. Wi-Fi in the middle of Windows XP is built like this:

The veknі provіdnik is guilty of buti badge "Bezdrotov merezheve z'ednannya". This demonstration demonstrates that the Wi-Fi module works correctly. Right-click on the icon and select "Enable". dali:

If there are no available points in the list, if you distribute your router, press "Update list". Let's choose a point on my name and click "Connect". Since the fence is password-protected, you will be prompted to enter an access code, after which the login will be restored.

Windows 7

On Windows 7, the order of connecting to a dart-free link has changed a little, becoming a little simpler. Now all available links are displayed after clicking on the Wi-Fi icon in the system tray. But if there is no icon, then:

Go to the center of management of the measures.
Click "Change adapter settings".
Find out the trouble-free z'ednannya and change your mind, what a bula has come.

When the wireless connection is enabled, the Wi-Fi icon will appear in the tray. Click on the new one to see the list of available points, circle the border and click "Connect".

Windows 8

On Windows 8, the order of connection to Wi-Fi was overwhelmed, however, the "At a fly" mode was added, so you need to take care of it. If the driver of the adapter is installed and wirelessly installed correctly, then you should see the Wi-Fi icon on the panel, when you click on it, a list of available services is displayed.

If you don't see the icon, select the same as on Windows 7 - open the "Change adapter settings" window and enable wireless connection. As if there is no most dart-free installation, change the drivers and the module's camp - everything is to blame, but it's included and installed.

If the adapter is switched on, the drivers are installed, if the available devices are not shown, please change that the icon for the “At the light” mode does not hang on the panel. Yakshto vіn є, it is necessary to switch on the mode. For whom we press on the icon i, we translate the call to the “Enabled” camp.

Windows 10

On Windows 10, everything was lost with a lot of small changes, so you can easily figure out how to connect a laptop to Wi-Fi:

Click on the icon of the rootless login in the tray.
Choose the size you need.
Press "Pidklyuchiti" and enter the password.

If the access point does not appear, try adjusting the fringe parameters. Click on one-menu prompts - it will open the "Merezha and the Internet" section of the parameters in Windows 10.

There are two tabs for you:

Wi-Fi - perekonaytes, scho no-dart tethering is enabled.
The "on the fly" mode - make sure that the mode of inclusions.

You can go to the change adapter parameters section and enable wireless connection. To put it simply, on Windows 10 you have a few equal options - you just need to choose the best way for yourself.

The presence of wi-fi gives you the opportunity to use the Internet in the various places themselves. Ale first, let yourself go, handily roaming in a cafe or on a bench in the park, surf the world of the Internet, get familiar with your laptop and know how to turn on the net on your laptop.

There is nothing collapsible in order to increase the function of wireless connection on a laptop, nothing. You just need to know the function keys to enable a wireless connection on your laptop brand, so the skin maker will play the key combinations in your own way. Tim, who tries to understand:

To turn on the wireless connection function on Asus laptops, you just need to press Fn and F2;
a button for a wireless connection on a HP laptop, a combination of Fn and F12, or a touch button with a small antenna in quiet models;
Fn and F5 are pressed on Lenovo, or a special jumper, which is indicated in the instructions;
Acer and Packard Bell include a combination of Fn and F3;
on other Samsung models - either Fn і F9 or Fn і F12.

If the standard combinations are not suitable (in new models, it may be introduced), then follow the instructions given in the browser, and all the necessary information related to the functionality of the laptop should be shown in a language. For some reason, you can use the Fn button, and in її vіdsutnіst press a special button with a small antenna or a jumper.

Enabling a wireless connection on a laptop in other ways

If there is no jumper on the keyboard, you can also blame it on the front panel or the bottom part of the laptop. Roztashovani on the lower part of the button shy of little memory, it is necessary to show special respect, so that you know there. Even though neither the combination nor the jumper could turn on the cordless mesh, then, more than anything, Wi-Fi is simply not fixed, and the time itself will be taken up.

How do I turn on the wireless mesh adapter?

Either way, the setting starts from rechecking the presence of the necessary drivers, they are connected, if they stink, but not connected, and then they are turned off and restored, and then they are connected, as if they are not in the laptop. You can change the driver through the "Control Panel", the menu item "Application Manager". If this one was not visible to the eye, then, perhaps, the wine is known in the section “Enjoyment and sound”.

From the "Dispatcher" it is necessary to go to the "Merezhev adapters" and show there the Wireless distribution, which is necessary. Maybe, but you can’t write, otherwise it’s marked with a hail sign. This is a direct indication of problems with drivers, if you happen to be able to restore it. The stench is due to be present on the disk, which is delivered to the laptop. If the disk has been wasted, or for some reason the installation will not exit, you can search for it on the site of the virobnik.

If the driver is є, if it is recognized by the hail sign, then it is necessary to click on the icon with the right button і in the menu to select the appropriate item. Sound out the phrase "Zadіyati." You may need to turn it on additionally in that case, as an adapter for connecting to the power saving mode.

You can use the savings factor in the windows 7 menu in the "Power" section, de blame buti added "Power Management". The new one has a tick on the item “Allow the inclusion for the economy”.

If you uncheck the box, the drivers will work, and you can connect to the standard pressing of the keys. Although the above described manipulations did not bring any result, the laptop needs to be shown to fakhivtsev - perhaps, faults.

strana-sovetov.com

How to enable dart-free merging on a laptop

Bezdrotovy Wi-Fi - the ease and efficiency of work on the Internet in any place, de є to new access. However, there are some who are stuck with the problem of connecting a laptop to Wi-Fi. In most cases, it is easy to slip, but sometimes it is necessary to carry out a number of parameters.

The wireless Internet in some laptops is turned on for an additional button from the image of the antenna. Shukati її slid on the building I will add.

Most of the newer models of laptops have a button for turning on every day. You need to turn on the wireless Internet by pressing the next few keys:

Asus - "Fn" - "F2";
MSI - "Fn" - "F10";
Acer - "Fn" - "F3";
HP - "Fn" - "F12";
Lenovo - "Fn" - "F5";
Samsung - "Fn" - "F9" or "Fn" - "F12".

If you need an external adapter to connect to the network, then you need to connect it to a laptop via a USB port.

If there is a Wi-Fi adapter in the laptop, then, in order to connect to the wireless network, it is necessary to turn it on in the installed windows. For this it is necessary to press the keys "Win" - "R", then enter "ncpa.cpl" at the window. The branch “Changing the parameters of the adapter” (or “Merezhevі pіdklyuchennya”) has the “Rootless stringer connection”. If it’s out of the blue, then it’s necessary to click on it with the right mouse button and select “Turn on”.

Through this button, you can enable the Wi-Fi adapter in the "Appliance Manager". As it happened, then in the “Merezhevy connections” the icon “Bezdrotov Merezhev z'ednannya” will be visible. To solve this problem, you need to press the "Win" - "R" keys, and enter "devmgmt.msc" in the drain. At the "Application Managers" select "Merezhevі adapters" and know the Wi-Fi or Wireless extensions. Click on it with the right mouse button and select "Zadiyati".

Sometimes it is necessary to independently enter the parameters of the measure, as if working in the attached mode. To do this, you need to enter "Center for management of fencing and open access", select "Management of fencing without fencing", "Add" and then "Create a profile of fencing manually". Enter the required parameters in the table, press "Dali" and "Connection".

Sometimes you can use laptops, in order to connect to a wireless network, you need to launch the “Wireless Assistant” or “Wi-Fi Manager” utility, which is located in the Start menu. Why can you turn on Wi-Fi without interruption.

SovetClub.ru

Enable and configure Wi-Fi on laptops with different versions of windows

Shvidky access or hardware jumper

Look around the case of the laptop for the presence of a hardware jumper or Wi-Fi on button.
Turn off the keyboard - one of the keys in the F1-F12 row is guilty but is marked with the icon of a non-rotor lock. If you press її at the same time with the Fn button, the adapter will turn on or turn off.

Fn button not working

If the installation of the utility did not help, or the key was disabled physically, then you can speed up by an alternative method of turning on the adapter. On windows 8 and windows 10, to enable the adapter, click on the Wi-Fi icon on the wake-up panel and turn the “Rotless Wire” button to the active position. If the adapter drivers are installed correctly, then the icon is to blame for the language boot.

Windows 7 does not have such a function, but you can try to enable wireless connection through changing the adapter parameters (read below for details). If this method does not help, then you can use the same keyboard with the Fn working key and then do not disable the Wi-Fi module anymore.

Setting up Wi-Fi on different versions of windows

Depending on the version of windows, you need to double check that the Wi-Fi module drivers were installed without pardon:

windows xp

As an idea, windows XP has been guilty of quitting for a long time, but on some old models of Dell and other laptops, the legendary system still continues to win its functions. Wi-Fi in the middle of windows XP is built like this:

Verify that the Wi-Fi indicator is on on the laptop (so you turned on the adapter and installed the drivers).
Open "Control Panel".
Find out the section "Merezhevі podklyuchennya".

windows 7

On windows 7, the order of connection to the wireless tether has changed a little, becoming a little simpler. Now all available links are displayed after clicking on the Wi-Fi icon in the system tray. But if there is no icon, then:

Go to the center of management of the measures.
Click "Change adapter settings".
Find out the trouble-free z'ednannya and change your mind, what a bula has come.

When the wireless connection is enabled, the Wi-Fi icon will appear in the tray. Click on the new one to see the list of available points, circle the border and click "Connect".

windows 8

On windows 8, the order of connecting to Wi-Fi was overwhelmed, however, adding the “At a fly” mode, with which you need to practice. If the driver of the adapter is installed and wirelessly installed correctly, then you should see the Wi-Fi icon on the panel, when you click on it, a list of available services is displayed.

If you don't see the icon, select the same ones that are on windows 7 - open the "Change adapter settings" window and enable wireless connection. As if there is no most dart-free installation, change the drivers and the module's camp - everything is to blame, but it's included and installed.

windows 10

On windows 10, everything was lost with a lot of small changes, so you can quickly figure out how to connect a laptop to Wi-Fi:

Click on the icon of the rootless login in the tray.
Choose the size you need.
Press "Pidklyuchiti" and enter the password.

If the access point does not appear, try adjusting the fringe parameters. Click on one-menu prompts - check out the "Merezha and the Internet" section of windows 10 parameters.

There are two tabs for you:

Wi-Fi - perekonaytes, scho no-dart tethering is enabled.
The "on the fly" mode - make sure that the mode of inclusions.

You can go to the change adapter parameters section and enable wireless connection. It seems simpler, on windows 10 you have a few equal options - you just need to choose more convenient ways for yourself.

Bezdrotova merezha has long become a splendid rіchchyu for wealthy vlasnikіv computers and laptops. Vykoristovuvat її easily and manually. Access to the Internet can be taken at any point of the apartment or office, but with every kilometer of wires, they will not stray under their feet. You can access the Internet not only from a laptop, but also from a tablet or a smartphone.

However, most of the coristuvachiv do not know how to solve simple problems related to the router, and do not understand how to turn on the wireless connection function on the laptop. If access to Merezhya is lost, it is not necessary to call the provider's technical support immediately. It is necessary to start talking about what called out to the Internet connection: a computer or a postal worker of services.

In some models, for example, the MSI GT780, the touch panel is wider than the keyboard, which allows one toggle to turn on or turn off the threadless mesh.

How to turn on the wireless connection function on a laptop through the “Measurement Management Center”

Buvayut vypadki, if you receive Wi-Fi inclusions programmatically and activate yoga for the help of the button, or it is impossible to receive the keys. How to enable the wireless connection function on laptops (Lenovo, Asus or Acer - not so important) in such situations?

Koristuvachev, it is necessary to right-click the mouse on the “Merezh” icon on the task panel. Dalі zі select the list "Center for management of merezha". At a glance, go to the side, where you can change the adapter parameters. In the middle of the proponed list, select a non-dart line and turn on її.

Connecting to change the color of the gray on the color, and in one hour you will be connected to the Internet.

Enabling droto-free communication through the "Attachment Manager"

You can also programmatically activate the fencing adapter through the Attachment Manager. As a rule, similar connections are rarely trapped, mainly - during the hour of failures in the robot's operating system.

To turn on the Wi-Fi adapter through the Attachment Manager, you need to:

Open the "Control Panel" tab.
Select from the list “Obladannya i sound”.
In the "Additional Printers" group, click on "Additional Manager".
Fire up the perelіk of lace adapters.
Right-click on the mouse on the word Wireless, and click "Turn on".

In this rank, you can turn on the dart-free merging hardware or software.

To connect to the Internet on a laptop through a wireless network, you need not only a WiFi module, but also a working access point. For someone in your home minds, you need to buy a router, and to access the Internet, sitting here at a cafe, you will need to turn on Wi-Fi on your laptop and enter a password for the required security: setting up an access point is required by the vlasnikiv mortgage.

It is practical to install a WiFi module in modern laptops, and if it is true that your device has such a function, it is simple. Who needs:

View "Control Panel";
Run the "Appendix Manager" (you can speed up in a row of jokes);
Expand the block "Merezhevі adapters".

Obviously, the word “Wireless” in the name means that your laptop supports wireless Internet.

Enabling "wi-fi" on the laptop behind the help keyboard

Mostly "wi-fi" can be turned on with hot keys, ring two, press at once. For other types of laptops, they can be changed, but the main Fn key, as a rule, is on. Another key required to enable it is a special WiFi icon, and it can be found on the keyboard in the functional row F1-F12.

For more details, how to turn on Wi-Fi on laptops of a specific brand, you can from the next table.

In the annexes of the past generation, “wi-fi” is turned on by a special button on the laptop case, but the icon of the border is left the same.

How to turn on "wi-fi" on Windows 10

On laptops with the “ten”, “wi-fi” can be turned on either in the system parameters, or for an additional area, it can be turned on, moreover, the other way is more efficient and quick:

1. On the taskbar, open system alerts.

2. Open the Merezha tab.

3. Enable WiFi by clicking on the preview thumbnail.

To enable "wi-fi" on Windows 10 for the additional settings menu, you need:

1. Enter "Parameters" and select the "Merezha and Internet" block.

2. Click on the WiFi menu and turn on the ringer to become a wireless network.

After this laptop, we will search for all available dart-free meshes. If it is already out in memory, the connection will be automatically; Well, if the access point for your device is new and protected (you will see the lock icon) - you need to choose and enter a password to connect to the Internet.

WiFi connection on Windows 7 and 8

For laptops on past versions of Windows, the Wi-Fi software inclusion algorithm is being revised.

1. Go to the "Control Panel" - "Merezha and the Internet", or right-click on the icon with the computer in the panel to remind the date of the year.

2. Select "Center for Management of Merezhy i zagalnym access".

3. Click on the "Change adapter parameters" menu.

4. For the help of the right button of the mouse, turn on the kerfless net.

If the “wi-fi” module is enabled, you need to select an access point (the list is displayed when clicking on the WiFi icon in the help area) and, entering a password if necessary, connect to it.

How the Internet through "wi-fi" does not turn on

If you have access to the Internet on a laptop after everything described above does not appear, connect the life cord to the computer without intermediary, open it through the "Control Panel" "Application Manager", select the "Merezheev adapters" tab, find your Wifi module in the transfer try updating the driver. After that, plug in the internet cable and re-attach the laptop.

If you turn on the Internet, then you can’t go out, either there may be problems on the provider’s side, or the router’s settings are incorrect, or the Wi-Fi module is faulty. The cost of repairs in the service center is from 1000 to 2000 rubles, but you can get by with the same WiFi module - on Aliexpress, such an add-on costs about 150 rubles.

categories
- Android
- programs
- iOS
- Printers
- Editors
- games
- SmartTV
- Internet
- Gadgets
- Zalizo

more popular