Install two hard drives on your computer. Installation of hard drive. Connection to disk
A typical laptop configuration involves installing two storage devices: one is a hard drive, the other is an optical drive. There is only one solution for installing a hard drive.
Therefore, in order to install another hard drive, you need to sacrifice the CD-ROM drive (that is, a DVD drive). For which there are adapter devices that exactly repeat the shape of an internal optical drive with fasteners for a standard 2.5-inch HDD.
In this article, I will tell you how to replace the cd rom in a laptop with an hdd.
How can I build a party?
There are two types of optical drives that are available on laptops that differ among themselves. "Tovstii" has a height of 12.7 mm, and "thin" - 9.5 mm. It’s possible to see how much you can install in your installation without taking the laptop apart. For this reason, let’s first look into the device manager and admire the model of the device.
In the meantime, Optiarc AD-7580S. Now we can see any popular Internet resource that sells similar products or Yandex.market and similar characteristics of the device.
As a matter of fact, I’ll adjust it, according to the description, to make it 13 mm (with rounding, it’s actually 12.7 mm).
If you are in doubt, you can do it yourself with the help of the emergency line. The drives 12.7 and 9.5 can be removed with an unbreakable eye.
Where to add an adapter for HDD in your ODD device
It is a plastic box with a small board with connectors and a microcircuit, as well as a USB cord for connection and a decorative strip on the front side. I think I have a mini-CD with drivers, or Windows 7, having installed the device without installing the additional software. Moreover, the device appears in the BIOS, so it can be used as a standard CD-ROM.
Statistics from the same category
I will share with you how I believe the problem is connected with my climb. Pratsyuvav, pratsyuvav... and there was no time left. Having thought about how to install a hard drive on your Acer AX3910 computer? Marries roses to a new one.
There are already a lot of people who have used this computer, and I’ll tell you honestly, none of them have let me down, it works super reliably, and it’s the best thing that I like, but it’s quiet. It works like a laptop. Stand on the table and it’s almost impossible.
Engineers, who are looking for an economical alternative to serial ones, have begun to explore parallel connections. For this reason, the standard has changed significantly. This is not a controller: it is correctly called a “host adapter”. Social measures will continue to grow rapidly. With every fate we learn about new speeches about those that work and that do not go into effect.
Your computer has two main types of memory: hard drive memory and random access memory, and other functions. Technicians call the hard drive's energy-saving system, which means that data will be lost if the computer is frozen. Traditional hard drives continuously record data in high magnetic fields on metal plates that wrap around them; The new technology of solid state drives does not contain any loose parts, instead using flash memory for saving files.
Installing another hard drive on an Acer AX3910 computer.
Prior to this model, the same desktop computers of the same brand were sold, only less powerful and with a smaller hard drive. Due to their operation, there was a need for a larger processor and a larger hard drive. I’ve been using this model for two years now and I’m not going to change it yet. The blame for the fact that there was no space on the hard drive.
Memory with sufficient access - this is a high-quality time-hour saving area in which running programs, opening documents and intermediate results of calculating and processing files are saved on your computer. This is good if your programs require a lot of memory. He also contributed to the book “Nanotechnology: Molecular Thoughts on Global Prosperity.” It also allows you to create an override to protect against wasting data when the main hard drive is not working. Hard disks are supplied in two versions: external and internal.
Computer parameters:
To further save information, use an external hard drive "WD Elements". The brand is not familiar to me, it is found in Thailand.
This HDD with a USB3 connector, the speed of data transfer is very high, so that I do not require a larger hard drive.
The process of adding an internal hard drive is rather complicated. Install the internal hard drive into the computer case, as described in the documentation on the hard drive's support. Data may vary depending on the type of hard drive, hardware configuration, and computer case. In the section “Please”. When you install an internal hard drive, make sure to ground yourself first to prevent static damage to the computer's internal hardware. After grounding the computer, unplug the power cable and open the case. Connect one of the available power cables from the computer's power supply to the power port on the hard drive.
- Secure the new hard drive to an accessible hard drive space.
- Close the computer and reconnect the power cable.
I wouldn’t brag just once and not start working hard. The time it takes for my programs to download files from an external disk has sharply increased. And the energy programs are Adobe Premier Pro, Adobe Muse. Galmo became concrete.
I felt restless. When you flip a disk, Windows reports a system error on the disk, but you can’t fix it. And in the new “all my life”! Archival photos, taken over many months. It became scary to think, like a rap..., I really don’t want to say this word! I walk around him very carefully, I drink and drink.
First of all, it’s a computer system with an additional hard drive. Following the instructions from your computer owner, open the computer case and find the hard drive. Since there is more space or a smaller hard drive for another device of the same size, you probably have room for another hard drive.
Then look at the cables connected to the original drive. One will be a rose of life, and the other will be a rose of data. The power supply goes directly to the computer power supply, and the data connection goes to the motherboard. Also check that there is enough space to connect another drive on the same string cable. However, you will need to install another string cable at another controller socket on the motherboard, assuming that it is available.
How to install another hard drive
What is it timid? I would like to immediately install an additional 1 TB hard drive, depriving the system of the same drive of the same drive, without installing the system and without changing anything. Having bought for 3820 rubles. And knowing that there is nothing in this compact case for anyone, put it first instead of a CD/ROM, and replace the CD/ROM with an external one, connected via a USB connector. It’s not so often that it’s at once and necessary. The motherboard also has two SATA connectors for drives.
Installing software on an external disk
- Make sure that the original disc and the new disc are connected at the same time.
- Now it seems like it won't be installed automatically.
- Launch all available software updates.
How can I build a party?
There are two types of optical drives that are available on laptops that differ among themselves. "Tovstii" has a height of 12.7 mm, and "thin" - 9.5 mm. It’s possible to see how much you can install in your installation without taking the laptop apart. For this reason, let’s first look into the device manager and admire the model of the device.
Everything you do is subject to the option of customization before installation. Until then, it’s too late to install them on another hard drive, if you don’t want to go through the hassle of deleting and reinstalling the program again. However, you cannot simply drag program folders onto another drive. Whatever you have to earn, do what is called a symbolic message. These little bits are similar to shortcuts on programs, folders and websites, which you will notice on your desktop, but they will get worse.
There is no need to go into complex commands, but this is a simple, cost-free utility that will do everything for you. Select “Customer settings” and enable all additional functions. If you install a security program, you will be asked in advance if you want to save it. There are two halves and dividing them in the middle - a combination of icons.
In the meantime, Optiarc AD-7580S. Now we can see any popular Internet resource that sells similar products or Yandex.market and similar characteristics of the device.
As a matter of fact, I’ll adjust it, according to the description, to make it 13 mm (with rounding, it’s actually 12.7 mm).
We need to select output folders and destinations. Check out the stench that is marked with a tick. Now programs run from the hard drive. Every time the space on your hard drive becomes scanty, it is time to transfer data to an external hard drive. Perhaps you need an external hard drive for making backups?
Connecting an external hard drive
First, buy the disk and go to your computer to connect external devices. Please pay attention to the fact that the plate is connected. Depending on the program, you will need a plate with higher or lower transmission speed.
Unpack and prepare the plate
When the disk arrives at your door, unpack it and marvel at what’s on the disk. In most cases, external drives are supplied with a desktop or connected power supply and cable for the computer.If you are in doubt, you can do it yourself with the help of the emergency line. The drives 12.7 and 9.5 can be removed with an unbreakable eye.
Where to add an adapter for HDD in your ODD device
It is a plastic box with a small board with connectors and a microcircuit, as well as a USB cord for connection and a decorative strip on the front side. I think I have a mini-CD with drivers, or Windows 7, having installed the device without installing the additional software. Moreover, the device appears in the BIOS, so it can be used as a standard CD-ROM.
Connect the lifeline and connect it. Then connect the hard drive to the computer. If you think you are unsafe, turn off your computer in the back. As soon as the disk is connected, turn it off and, if necessary, turn off the computer. Now the operating system can recognize the disk and display it in the file system. Vikorist for consumption and guilt.
However, the cables have two plugs on one side. The reason for this is quite banal: the other plug has a life line, but there is no data line. In this case, simply replace the plug and you’re good to go. If you want to replace your existing drive, use your data migration software to move old files from your existing drive to the new drive.
With your own power and without hiring a specialist, whenever you need it, you can connect an additional hard drive to your computer. We'll figure it out further installation diagram and further connection of the new hard drive to the system unit. Make sure that the action moves smoothly, clearly, without stagnation of force or sharp actions.
First bite, need to know the entire system unit, for which life is turned on, and then absolutely all the parts are displayed. Then twist and remove the barrel lids, as shown.
For the hard drive, obviously, the transferred fluids, which are stored in the model of the system unit, can be moved in different positions and therefore in different positions. 
Depending on the method of connecting the hard drive directly to the motherboard, they are divided into two types, and itselfSATAіIDE. Another option, which can be used to connect even wide cables and ports, is considered old and is rarely used. The IDE variation will not be discussed here for its irrelevance.
If the SATA hard drive is already connected to the computer, you can easily add another one. The additional disk is inserted into the adjacent middle space and secured to the body. It is important that the smells are dissolved at a sufficient distance, one at a time, to prevent overheating. 
In order to attach a new hard drive to the motherboard, need a cableSATA. Place one end near the top slot on the board, and the other end to the hard drive. 
Varto note that in the skin model the system unit receives a minimum twoSATA-Roznimannya.
Let's step on it, it's necessary get a new hard drive not in the middle to the living block. For whom should I stagnate? special cable, the plug is slightly wider than the one on the SATA cable. If there is only one plug coming out of the life block, you will need to unplug it. It turns out that the narrow plug at the life block is not being transferred, then the trace add adapter. Examples shown in the pictures: 
Having cut off all the cables, then connect the hard drive to the cable for life.
In addition, there are a lot of connections. You can then start the computer by attaching the covers, connecting the cables, and turning on power. After this, there is a need for the system setup of a new hard drive.
Have a nice day!
The space on the disk is never too much!
This truth axis has already remained relevant for 30 years. Regardless of the developments in the IT sphere (the appearance of bad disks, hedgehogs, high-speed Internet) - we still suffer from the lack of good space on the HDD.
Obviously, the biggest problem is buying and connecting another drive. Well, as in any nutrition, which has its own nuances... Please, take a look at this article in this nutrition report (so that the article would understand the majority of misunderstandings among readers).
And so, let’s figure it out...
Note! Please note that disk space can “disappear” due to non-optimal settings in Windows (for example, “bloated” files and late sleep), or a great deal of money. I recommend clearing everything and optimizing the OS ( ), first buy a new disk (it is possible to remove all your details).
Option 1: installing a classic HDD on the PC system unit
A couple of words before choosing a new disk
Now, choosing a new hard drive is a big topic. Here I want to highlight one important detail Interfaces. The most common problems are IDE (old) and SATA. First, buy a disk, I recommend checking your PC (especially if you already have an old one) and find out what interface you support (Otherwise, to get to the disk you will have to buy adapters/adapters - and with them additional problems often arise...) .
SATA III and IDE - alignment (as applied. The photo shows 2 hard drives)
About installation:
Addendum (if the computer does not download a new disk)!
After you turn off your computer (with another disk installed *), it is not at all a fact that you will immediately accumulate money from “My Computer” or “Explorer”. On the right is that new disks often come unformatted (and such storage can never run Windows).
Therefore, after becoming more and more interested in Windows, I highly recommend (this is a system utility for Windows) Or quickly get special ones in order to format the accumulated goods and start working with them fully.
Option 2: connecting to a USB port (external drives)
If you don’t want to “climb” through the insides of the system unit (and many Koristuvach-Pochatkivts are asked to suggest this option themselves, so as not to discourage anyone), or you simply have no warranty on your PC (and don’t want to open the block and then risk it) - then you’ll be out...
On the right, there are hundreds of different specials on sale at the same time. boxes: they are a disassembled box (div. screen below), in the middle of which you can install a classic hard drive (both 2.5 and 3.5 inches (both the drive is for a laptop and for a PC)) And then connect it to the USB port. Moreover, you can connect not only to a computer, but also to a small netbook, for example.
Working with such a disk does not differ in any way from the primary disk (which is in the middle of the system): you can also store music, movies, documents, games, etc. on it (plus anything else, it is easy to carry and connect it to other devices).
One minus: there may be problems with installing Windows OS on the new one (so choosing to use the external disk as a system one is not a good idea. For everything else, it’s a completely bad option).
Before speaking, we are currently selling not only boxes (for classic HDDs), but also new hard drives. There is a lot of diversity in them, differing not only in terms of equipment, but also in the connection interface, dimensions, speed, etc.
I'll help you! How to choose a new hard drive (HDD) - 7 important points -
Stationary external hard drive - connects to 220 V through a life block
I'll help you!
Option 3: if you have a laptop.
Many people often refer to a laptop under the word “computer”. In this regard, I will also look at this problem.
The laptop is too bad to be upgraded. Since you can “stuff” a number of hard disks into the initial system unit (for example, 5-6 pieces), then many classic laptops can only fit 1 slot under the HDD (transferred to the driver). And, say, you’ve already started working with a fine disk - that’s it. There are no slots for other storage devices.
Prote, don’t rush to get angry, there are better options:
That's all for now, more information on the topic is in the air.
Far away robots!
Computer technology has long ceased to be a wonder; it is practically obvious to everyone. The nature of the trend is becoming increasingly obvious: some people are actively using technology, downloading movies to it, playing music, and others are using an electronic calculating machine, if they want to look at the latest news from all over the world. New web or visconate part of home-based work.
It’s time to replace old components
In connection with this, the importance of the hard drive rises. Since there is not enough free space, it is difficult to regain normal productivity on your PC. In such circumstances, many authorities are likely to add another “gwent”, thereby increasing the disk space. However, it is very important to find out how to connect the hard drive to the computer.
Finding information on the Internet on how to connect a hard drive to a computer is not difficult. It is important for you to carefully read all the recommendations, and then you won’t have any problems if you install an additional hard drive on your own, which leaves the old one in the same place.
An old hard drive requires replacement even if it is completely unusable and does not support renewal. By installing another hard drive at the same time as the old one, the user will be able to avoid expanding the space, since everything will end up sooner.
Installation in PC case
Connecting the hard drive to the computer begins as soon as the user must place it in the case and securely fasten it.
To ensure the correct installation of the screw, first remove the cover from the system unit case. At the front part you can easily identify special sections designed for drives and hard drives. Drive the top part, and the other hard disk will move to the bottom part of such devices.
The hard drive should be inserted into any free water, but it should be placed at a small distance from the obvious. It is very important that during the process, both parts heat up, which is unpleasant for the performance of the PC.
Then insert the other hard drive strictly in a straight line so that the connectors are directed towards the internal parts of the system unit to ensure a more comfortable connection. Once the new hard drive is in its correct position, securely fasten it by tightening the screws on both sides, ensuring a tight connection with the seal.
After fixing the trace, check the importance, trying to enjoy it. Since the hard drive is not susceptible to theft, it means that all the details were collected correctly.
Connection to additional loops
Once you have successfully connected another hard drive to the computer, you can move on to the next part of such important steps. At this stage, you should connect the other hard drive directly to the motherboard, and also ensure the supply to the new power supply.
For this purpose it is necessary to add additional cables. Before speaking, it is important to note that the connectors that directly connect the hard drive may become damaged depending on the release date of the PC.
An old computer is equipped with IDE connectors, but a new one also has SATA connectors, which are characterized by amazing speed code. Previously, when buying, buyers were guided by paying attention to roses and buying only Winchesters with a brown appearance. Nowadays, finding a hard drive with an IDE connector for sale is problematic, but this does not mean that there is no hope of installing another drive. It’s just that special adapters are needed in addition to those who need to knit.
By connecting another hard drive with additional SATA connectors and adapters, the power supply of a smart machine will not only ensure the system's speed code, but also make the installation process easier.
When installing a few old hard drives with an IDE connector, I had to manually configure the screw mode, which involved setting jumpers at the song position.
Connecting to additional SATA connectors is much easier. All sockets on the new technology are equipped with special partitions, so it is a priori impossible to connect another hard drive incorrectly.
USB connection
There is another alternative method that will make it absolutely easy to connect new disk space, without the need to disassemble the system unit case.
In connection with this, a lot of people need to know how to connect an additional hard drive to a computer, without being aware of any additional difficulties. The answer is obvious, another hard screw can be connected to an electronic calculating machine using an additional USB device.
Such hard drives operate via a USB connector, up to any connection. However, this is typical even for disks that range in size from 1.8 to 2.5 inches. Anything tighter, for example starting at 3.5 inches, will require an additional power supply.
External accessories are also easy to connect, which is an advantage for the large number of users.
Designation of devices in BIOS
Having ensured that the hard drive is properly connected, make sure that you correctly enter the BIOS, otherwise there will be no problem with the clear work.
To make the correct settings in the BIOS, you should also consider how to connect the old hard drive to the computer, how to connect the new hard drive, and how to ensure the correct operation of these two drives.
If you understand that the operating system is installed on one of the disk spaces, in most cases the old hard drive itself is the place where the operating system is installed.
In connection with this setup of the BIOS, the user is obliged to prioritize the storage of the old hard drive itself. Pomilkov's priority will not be allowed to invade the system. In the BIOS, it’s easy to determine the priority; all hard drives on the other hand will be registered as SATA with the given number. The number itself indicates priority. The hard drive and operating system are to blame for the SATA 1 value.
If any hard drive does not appear in the BIOS, you should check that the connection is correct, otherwise it will be impossible to manage the installed disk space.
Also, the installation of an additional hard drive and a pre-baked part is accompanied by processes that can easily be done by a Vikonian, be it any kind of koristuvach, if they add care and show special respect.