Intel processor sockets. How the LGA1150 socket differs from the LGA1155 socket and the newer 1150 or 1151

One of the most popular processor sockets from Intel at the moment is the socket 1150. Although this platform is already being gradually replaced by the updated socket 1151, otherwise, the carrier crystals will definitely be more relevant in the future there will be 2-3 fatalities, and there will be opportunities reviewed in this article.

that position

In 2013, the following was relevant when choosing a new PC: “Socket 1150 or 1155?” The difference in productivity between these processor sockets was practically daily. From the price point, we reduce the 1155, and the energy saving axis is an order of magnitude greater than that of 1150. However, the remaining one will be replaced by a progressive family of processors - most of which are already installed in socket 1151. Otherwise, This means that socket 1150 allows you to create the largest available computer. yuterni systems. And the segment of the most productive PCs and servers occupies the 2011 socket.

Segmentation of processor solutions

Socket 1150 for processor plans is divided as follows:

A solution for computer enthusiasts with “Ai5” and “Ai7” processors with the “K” index. They have multiple unlocks and for proper selection of PC configuration, this nuance allows you to eliminate the essential increase in productivity.

The most productive I7 chips were particularly suitable for powering the most resource-intensive computers - servers, graphics and workstations and gaming PCs. This is the same goal as “Ay5”, but the level of their productivity is lower than that of “Ay7”, but at the same time the price is modest.

The middle segment of this platform was occupied by solutions based on “Ai3”. This family of CPUs is ideally suited for a wide variety of tasks. However, in some situations (for example, in the most trivial games) you have to sacrifice some parameters and thus become less important in the gameplay process itself.

To get primary-level computers, it is best to use the largest available CPUs – Pentium and Celeroni. Their computational capabilities are entirely sufficient to complete a wide variety of office tasks.

Generation of Haswell conductor crystals

The first generation of chips codenamed “Haswell” was presented for this computer platform, and at this time there was a dilemma: “Which is better to choose: socket 1150 or 1155?” The difference in productivity between them was non-networking. And the energy saving axis of the 1150 was better. All these chips were prepared using the 22 nm process. The upper segment is equipped with Cor Ai7 4770K (with the possibility of overclocking) and Cor Ai7 4770 (in which case there is a multiplier of CPU blocking). These chips could operate in 8 computing threads and a total of 4 computing cores. The cache of the third tier was 8 MB, and their base was 3.5 GHz. The processors Cor Ai5 models 4670K, 4670 and 4570 occupied a little bit lower in terms of productivity. In the first period, the multiplier of CPU unlocks made it possible to reverse this significant increase in productivity. In the first two models, the CPU frequency was 3.4 GHz, and in the remaining one - 3.2 GHz. The number of computational streams is limited to 4, and the cache of the third level is 6 MB. Even lower in terms of productivity is “Cor Ai3”. Their frequencies were reduced, the third-tier cache was changed, and the number of physical cores increased to 2 with 4 computing threads. The niche of the most modest processors was occupied by Pentiums and Celeronis. Minimal frequencies, minimal cache of the 3rd level and only 2 cores.

Another family of chips for this processor socket

The first generation of chips for socket 1150 was not very successful. During overclocking, processors often overheated and went out of tune. As a result, Intel was able to release an additional family of processors with coated thermal paste under the cover for heat dissipation, which gave up the code name “Haswell Refresh”. In essence, these are the same chips, but also with other markings. For example, “Kor I7 4770K” was renamed to “Kor I7 4790K”. With coated thermal paste and processor solutions, they could boast a higher frequency (the 4790 won at 100 MHz).

Generation of Broadwell chips

Socket 1150 can boast the power of 5th generation Cor processors codenamed Broadwell. For desktop computers, only 2 models of chips were released - “Cor Ai7 5775” and “Cor Ai5 5675”. The specifications were more modest, lower for the predecessors: frequencies below 200 MHz. The key innovation of this CPU is the reduction in the technological process - 14 nm.

Chipnets

8th and 9th series of system logics for this platform. Pochatkov’s niche was occupied by the H81, which boasts a minimal level of functionality. The middle segment was occupied by B85, Q85, Q87 and H87. Well, the most progressive solutions were based on the Z87. There are only Haswell and Haswell Refresh chips (in which case it is recommended to update the BIOS) in this chipset. Socket 1150 allows you to install Broadwell solutions, but they can only be used in the 9th series of system logic. There are 2 total - H97 and Z97. These sets of system logic are oriented towards high-performance PCs.

Further prospects for this computer platform

Every 2-3 years, the Intel corporation is updating its computer platforms and releasing motherboards with a new processor socket. Socket 1150 units were officially introduced in 2013 simultaneously with the first central processors “Cor” of the 4th generation. At once, after 3 years, this platform is gradually being updated with a new processor socket (socket 1151), into which the 6th generation of processors based on the “Cor” architecture is installed. As a result, we can say that the 1150 processor socket is living out its remaining days. The wines are not the ones that are old. It is simply replaced by an updated computer platform. If only the most productive CPUs will be relevant in the next 2-3 years.

Intel processor sockets, as stated earlier, will now change from 1150 to 1151. That platform 1150 is already at the end of its life cycle. This does not mean that these processor solutions are not relevant. This will immediately create the greatest interest in the range of Intel chips. Prices for them have been reduced for the lightly updated 6th generation of “Cor” processors, and the level of productivity between the 4th, 5th and 6th generations does not vary as much. Therefore, if you need an inexpensive, yet productive computer, you can safely buy a computer with the necessary equipment based on the Haswell or Haswell Refresh CPU. Well, Broadwell's solution is aimed at the niche of the most productive PCs, and in this case, it is more likely to pay a relatively small amount and add a system based on socket 1151.

To connect the computer processor to the motherboard, special sockets are used. With each new version, the processors added more and more capabilities and functions, and each generation introduced a new socket. This led to a lot of craziness, but allowed for the implementation of necessary functionality.

Over the past few years, the situation has changed a little, and a list of Intel sockets has been formed that are actively being researched and supported by new processors. From this article we have collected the most popular sockets of Intel processors in 2017, which are still being developed.

Before we move on to looking at processor sockets, let’s try to understand what it is. A socket is the physical interface for connecting the processor to the motherboard. The LGA socket is made up of low pins that align with plates on the underside of the processor.

New processors typically require a different set of pins, which means a new socket. However, in some situations, processors save money from the front ones. The socket is defective on the motherboard and it cannot be updated without completely replacing the board. This means that upgrading the processor can completely restructure the computer. It is therefore important to know which socket your system uses and what you can use to earn money.

1. LGA 1151

LGA 1151 is the remaining Intel socket. Released in 2015 for the generation of Intel Skylake processors. These processors used the 14-nanometer process technology. The parts of the new Kaby Lake processors have not been changed, this socket is no longer relevant. The socket is supported by the following motherboards: H110, B150, Q150, Q170, H170 and Z170. The Kaby Lake output brought the following payments: B250, Q250, H270, Q270, Z270.

Updated with the latest version of LGA 1150, USB 3.0 support has been added, DDR4 and DIMM memory modules have been optimized, and SATA 3.0 support has been added. The cost of DDR3 has been saved. Video support is supported by DVI, HDMI and DisplayPort, and VGA support can be added by video producers.

LGA 1151 chips support additional GPU overclocking. If you want to upgrade the processor or memory, you will have to choose a high-class chipset. In addition, support for Intel Active Management, Trusted Execution, VT-D and Vpro was added.

In tests, Skylake processors show shorter results than Sandy Bridge, and the new Kaby Lake is even more hundreds of times faster.

Processor axis that operates on this socket:

SkyLake:

• Pentium – G4400, G4500, G4520;
• Core i3 - 6100, 6100T, 6300, 6300T, 6320;
• Core i5 – 6400, 6500, 6600, 6600K;
• Core i7 – 6700, 6700K.

Kaby Lake:

• Core i7 7700K, 7700, 7700T
• Core i5 7600K, 7600, 7600T, 7500, 7500T, 7400, 7400T;
• Core i3 7350K, 7320, 7300, 7300T, 7100, 7100T, 7101E, 7101TE;
• Pentium: G4620, G4600, G4600T, G4560, G4560T;
• Celeron G3950, G3930, G3930T.

2. LGA 1150

The LGA 1150 socket is split for the latest fourth generation of Intel Haswell processors in 2013. He is also supported by some chips from the fifth generation. This socket works with the following motherboards: H81, B85, Q85, Q87, H87 and Z87. The first three processors can be used with the devices of the cob level: the stench does not support Intel's daily capabilities.

The remaining two boards support SATA Express, as well as Thunderbolt technology. Crazy processors:

Broadwell:

• Core i5 – 5675C;
• Core i7 – 5775C;

Haswell Refresh

• Celeron - G1840, G1840T, G1850;
• Pentium - G3240, G3240T, G3250, G3250T, G3250, G3260, G3260T, G3460T, G3460T, G3460T, G3460T;
• Core i3 - 4150, 4150T, 4160, 4160T, 4170, 4170T, 4350, 4350T, 4360, 4360T, 4370, 4370T;
• Core i5 - 4460, 4460S, 4460T, 4590, 4590S, 4590T, 4690, 4690K, 4690S, 4690T;
• Core i7 - 4785T, 4790, 4790K, 4790S, 4790T;

• Celeron - G1820, G1820T, G1830;
• Pentium – G3220, G3220T, G3420, G3420T, G3430;
• Core i3 - 4130, 4130T, 4330, 4330T, 4340;
• Core i5 - 4430, 4430S, 4440, 4440S, 4570, 4570, 4570R, 4570S, 4570T, 4670, 4670K, 4670R, 4670S, 4670;
• Core i7 - 4765T, 4770, 4770K, 4770S, 4770R, 4770T, 4771;

3. LGA 1155

This is the oldest socket on the list for Intel processors. It was released in 2011 for another generation of Intel Core. Most processors in the Sandy Bridge architecture work on their own.

The LGA 1155 socket has been developed for processors of two generations, including Ivy Bridge chips. This means that it was possible to update without changing the motherboard, just like from Kaby Lake.

This socket is supported by twelve motherboards. The older line includes B65, H61, Q67, H67, P67 and Z68. All the stinks were released at once from the Sandy Bridge outlet. The launch of Ivy Bridge brought the B75, Q75, Q77, H77, Z75 and Z77. All payments use the same socket, but on budget devices these functions are enabled.

Supported processors:

Ivy Bridge

• Celeron - G1610, G1610T, G1620, G1620T, G1630;
• Pentium - G2010, G2020, G2020T, G2030, G2030T, G2100T, G2120, G2120T, G2130, G2140;
• Core i3 - 3210, 3220, 3220T, 3225, 3240, 3240T, 3245, 3250, 3250T;
• Core i5 - 3330, 3330S, 3335S, 3340, 3340S, 3450, 3450S, 3470S, 3550, 3550P, 3550, 3550, 3550, 3550;
• Core i7 - 3770, 3770K, 3770S, 3770T;

Sandy Bridge

• Celeron - G440, G460, G465, G470, G530, G530T, G540, G540T, G550, G550T, G555;
• Pentium - G620, G620T, G622, G630, G630T, G632, G640, G640T, G645, G645T, G840, G850, G860, G860T, G870;
• Core i3 - 2100, 2100T, 2102, 2105, 2120, 2120T, 2125, 2130;
• Core i5 - 2300, 2310, 2320, 2380P, 2390T, 2400, 2400S, 2405S, 2450P, 2500, 2500K, 2500S, 2500T, 2550;
• Core i7 - 2600, 2600K, 2600S, 2700K.

4. LGA 2011

The LGA 2011 socket was released in 2011 after the LGA 1155 as a socket for high-end Sandy Bridge-E/EP and Ivy Bridge E/EP processors. The socket is divided for six-core processors and for all processors of the Xenon line. For home developers, the X79 motherboard will be relevant. All other fees are covered by corporate clients and Xenon processors.

Tests of Sandy Bridge-E and Ivy Bridge-E processors show very bad results: productivity is 10-15% higher.

Supported processors:

• Haswell-E Core i7 – 5820K, 5930K, 5960X;
• Ivy Bridge-E Core i7 – 4820K, 4930K, 4960X;
• Sandy Bridge-E Core i7 – 3820, 3930K, 3960X, 3970X.

These were all current sockets of Intel processors.

5. LGA 775

It is available for installing Intel Pentium 4, Intel Core 2 Duo, Intel Core 2 Quad processors and many others, even up to the release of LGA 1366. Such systems are outdated and use the old DDR2 memory standard.

6. LGA 1156

Socket LGA 1156 was released for the new line of processors in 2008. Supported by the following motherboards: H55, P55, H57 and Q57. New processor models for this socket have not been released for a long time.

Supported processors:

Westmere (Clarkdale)

• Celeron - G1101;
• Pentium – G6950, G6951, G6960;
• Core i3 – 530, 540, 550, 560;
• Core i5 – 650, 655K, 660, 661, 670, 680.

Nehalem (Lynnfield)

• Core i5 – 750, 750S, 760;
• Core i7 - 860, 860S, 870, 870K, 870S, 875K, 880.

7. LGA 1366

LGA 1366 – this version of 1566 for high-class processors. Supported by X58 motherboard. Supported processors:

Westmere (Gulftown)

• Core i7 – 970, 980;
• Core i7 Extreme – 980X, 990X.

Nehalem (Bloomfield)

• Core i7 - 920, 930, 940, 950, 960;
• Core i7 Extreme – 965, 975.

Visnovki

In this article, we looked at a generation of Intel sockets that were previously used and actively installed in current processors. Some of them are similar to new models, others are largely forgotten, and are still found in the computers of customers.

The remaining Intel 1151 socket is supported by Skylake and KabyLake processors. It is possible to assume that CoffeLake processors, which are connected to this socket, will also abuse this socket. Previously, other types of Intel sockets were used, but they are no longer common.

Sandy Bridge processors with LGA1155 first appeared in 2010, replacing other processors with LGA1156 sockets and Lynnfield cores. New processors are more productive and therefore run much less hot. Models with an unlocked multiplier allowed them to reach record frequencies at the time of release. In 2012, the processors were lightly equipped with processors with an Ivy Bridge core, which use the same LGA1155 processor socket. These chips are being upgraded to the third generation and are being upgraded primarily with PCI-E version 3.0. Once again, they support them as quickly as Sandy Bridge, and gained popularity. This is the result of video card manufacturers who have released top solutions with such an interface. For the sake of objectivity, it is important to note that third-generation processors have less overclocking potential compared to other generations.

Socket LGA1150

Socket LGA1155

Fourth generation Haswell processors have replaced Ivy Bridge. The stinks brought with them a new rush of productivity, and a new processor power. The graphics processor has undergone serious modernization, and productivity has reached a level that allows you to play simple games quite comfortably. Almost overnight, fifth-generation processors with a Broadwell core were released in the fourth generation, which ensures productivity similar to Haswell at a lower energy consumption.

The following table allows you to sort out the list of processors:

To update the chipsets that support these processors, let’s take older models whose names begin with “Z”

To equalize productivity, we will look at 3 older processors of another, third and fourth generation. In the fifth generation, there is no special sense that the CPU was created not for high productivity, but for increased productivity per unit. That's why Swedish processors give up the stench to fourth-generation processors.

The test results show how the productivity of processors has increased from generation to generation. I blame this for a game test based on the Crysis Warhead game. This means that the robot only has one processor core, and the main criterion for productivity is the clock frequency. It can be seen that the Core i7-3770 has the lowest clock frequency, showing minimal productivity. All old games operate in a similar manner, so if you love World of Tanks or Crysis, then change the processor of another or third generation without a problem. For daily games, such as GTA 5, The Witcher 3 or Project CARS, the new processor will allow you to reduce productivity. For tasks such as editing photos and videos, mathematical developments, and so on, switch from Maya sense. Particularly for doctors who need modernization and replacement only. Other components can be upgraded from the old system.

I'm going crazy until I get more energy. Let's take a look at the Core i7-2700K, Core i7-3770K, Core i7-4790K processors installed in the system, and other notable energy-saving graphics cards include the Radeon HD 7970 video card.

The energy consumption of the processor should be stored during heating. Tobto. If the processor lasts longer, then it will need to be cooled. Apparently, the cooling system of a more economical processor is also quieter. The table with energy consumption tests shows that Core processors of another generation have the highest energy consumption. With processors of the third and fourth generation, everything is a little more foldable. The tested processors showed poor results: the Core i7-4790K was the best among the idle ones, and the Core i7-3770K was the best among the most advanced ones. However, it is important to note that today's processors rarely perform at high levels, it is important that the CPU effectively reduces energy consumption. It can be concluded that in non-extreme modes the Core i7-4790K will have less energy consumption.

Hello, readers of the tech blog. Today we will reveal which processors fit socket 1151 (Skylake, Kaby Lake) and 1151v2 (Coffee Lake). This article will try to provide information about the latest, low-cost, and low-cost Intel Core, Pentium, and Celeron chips.

The CPU change will be prompted by the list to provide more accurate information about the model on the market.

And so, please make an important clarification: socket LGA1151 does not have the same capacity as 1150 and does not support Xeon server processors.

Processor capacity table

Socket 1151 from Intel is already available in its own right, and there are two versions: the first supports chips of the 6th and 7th generations, and the other supports only the 8th. The picture is much simpler, but it’s not about anything else.
Let's see how i3, i7, Pentium and Celeron are running on the 1151 Gen 1.
Now let's look at the line of chips that will fit the motherboard with the 1151v2 socket.
In 2018, 9th generation CPUs reached the top of the list.

Optimal processor for a long time

And now the final part is the cleaning. We have determined which processor is suitable for a particular socket. Now the model of the chip itself is no longer visible. If you want to learn more about the CPU, we recommend reading this article.
And now let’s go through the most beautiful representatives of the 6,7 and 8th generations:

Skylake- Intel i5 6400T engineering grade. Over time, this processor has generated a lot of noise, extremely low volume, 4 productive cores with a frequency of up to 2.8 GHz and a very modest heat package of 35 W.

Kaby Lake- Intel Pentium G4620. Thus, the title “Hyperpenny” became a cult among gamers at the time of its release, having demonstrated the functionality of the Intel Core i3-7100 at a significantly lower cost. You can also choose either the mid-range i5-7400 or the top version of the i7-7700k, which has 4 cores and 8 data processing threads. Stone still respects current, sophisticated and useful solutions for advanced systems, and also supports overclocking up to 5 GHz multiplier.

Coffee Lake- i5-8400. With the advent of the 8th generation of chips, Intel added not only a new socket, but also 2 additional cores of the skin line, after the Celeron and Pentium. Mati is a 6-core processor that can automatically increase the frequency from 2.8 to 4 GHz - even a further contribution in the future and I highly recommend it (for prices on i5 you can find out in this (moreover, I know this discounter well, to reliable i verified seller)).

Variations between1151 ta 1151v2

It has long been no secret that the processor socket used for system logic sets of the 100th and 200th series is absolutely different from the 300th. And the point is not that Intel wants to earn more pennies. The introduction of additional cores forced engineers to thoroughly redesign the life cycle of Coffee Lake processors in order to ensure stable operation of the chips under extreme overclocking.
The key changes occurred in the contact maidans VCC (life) and VSS (earth). In this case, the number of reservations of RSVD contacts has quickly shortened. So the situation is like this:

As you know, pairing old chips with new motherboards is physically as difficult as fitting a Chinese plug into a European socket. So, there are enthusiasts who managed to get Kaby Lake on the Z370 by modifying the BIOS, but the left part of the function was unstable, and the solution was stuck for days.

So if you have plenty of free time, you can try it, but I don’t recommend doing anything.

I hope you liked this article, so please comment and share with your loved ones. See you in new articles. Boo.

Hello, dear guys. I love processors, and I love everything associated with them. It was cool the next day. And today our topic is this - 1155 and 1150, what is the importance of the socket and what is the madness? I’ll say right away that there is no absurdity whatsoever, since there are different sockets, even similar ones. 1155 is an older socket and supports two generations of processors, such as Ivy Bridge (third generation) and Sandy Bridge (another generation). Well, 1150 is a new socket, supported by the Haswell generation (fourth generation) and Haswell Refresh. My axis itself has 1150 sockets and stumps (percent).

Oh, I forgot a little, the 1150 socket is still a little unique - in this case, and in motherboards on the Z97 chipset there is a Broadwell support (fifth generation).

In fact, the 1150 socket is supported by two generations, and the other generation is somehow interconnected - especially on the Z97 chipset. There were rumors that maybe there would be some support on the Z87, but as a result there is no need for any additional support.

Well, now to the final point. Let's start with socket 1155. There are two of them, the first is the i7 2600K, and the other is the i7 2700K, but it’s hard to know. This processor is up to the Sandy Bridge generation, but it’s old as of 2018, but it’s still bad, so you can actually play on the new one! Another processor - this is the same generation Ivy Bridge - the i7 3770K model, well, this is also an additional processor, certainly not the same as the new one, but you can definitely lose money on a new one. Before speaking, another important plus of this work is prices. For example, we have an i7 2600K that you can find for $100.

Now let's talk about 1150 sockets. It's even cooler here. The coolest one is the i7 4790K, whose productivity is close to that of the i7 7700K (Kaby Lake generation). The price for the second-hand market is not the lowest, that's what it's worth. This generation of Haswell Refresh, I remember, to support this, it was necessary to update the bios. So, by the way, the other coolest processor is the i7-5775C - a rare beast, as you can know, it won’t be cheap. It only works on the Z97 chipset, but it won’t work on others, it’s already been verified.

Note to you - processors with the letter K mean that they can be overclocked. It’s not possible without it, and such work costs even less. The only thing that doesn’t make sense to me is that it is possible to overclock the i7 5775C by reading on the Internet how it is possible.

That's it guys, now let's go over the characteristics, okay? Marvel, starting with the i7 2600K, let's explain the little things in our own words. As I already wrote, the processor is kind and valiant. It has 4 cores, 8 threads. The frequency is 3.4 GHz, in turbo mode it rises to 3.8. The cache is 8 MB, the memory of everything with this processor is normal, and you can play on it, and you can download a little bit of the bomb for a ridiculous amount of money. The main characteristics of the i7 2600K are shown in the picture:

Now about the i7 3770K, it will be a little more beautiful, the frequency is 3.5 GHz, in turbo mode 3.9, everything else is the same. The generation of the processor is newer, so at least it’s a little more productive... but for the price of an i7 3770K you can buy an i7 2600K and normal cooling, so what to think about. The axis characteristics of the i7 3770K in the pictures will amaze you:

So, now about the i7 4790K - well, it’s already a normal processor, so you can call it in our language. In the case of new games, the frequency is normal, but the price of a used one is not entirely normal.. well, just to add a little bit, then what will be the price of a new i5 8400 on a new socket, I respect the Coffee Lake generation, which already has 6 cores, and not 4.. Garazd, the i7 4790K has a frequency of 4 GHz, the turbo mode is 4.40, which is really bad! Refrigeration tezh tezh bazhano shob buv bolsh-mensh. This whole process can be repaired, and it will definitely last a couple of more years, beyond normal cooling. Axis characteristics i7 4790K

Well, now about the current processor – i7-5775C. The unique thing is that this is the fifth generation, so this is more relevant today, then for 2018. Also based on the 14 nm process technology, there is 6 megabytes of cache. Nothing new. But the most important thing in this processor is the eDRAM memory, which is superior to all previous processors, regardless of the lower frequency. So, this processor is good, even if it is of such a nature, but the price of a used one is not that. The operating frequency is 3.3 GHz, in turbo mode 3.7, and the most important thing, as I already wrote, is eDRAM memory, totaling 128 megabytes. So, you can see the characteristics of the picture:

Before speaking, are you looking at the eDRAM power icon? I pressed him and the following message popped up:

Well done, guys, such dynamic RAM right in the processor chip!

That's all, I especially like the i7 2600K due to its price, after all, 4 cores.. 8 threads.. and the ability to overclock. And I forgot to tell you that the i7 2600K has solder under the lid, it’s metal, not paste! Therefore, theoretically, it is better to scold him than others. First axis, having read that the i7 2600K can be upgraded to 4.6-4.8 calmly, and at this frequency the processor is already decently hot! That's all, good luck to you and take care of yourself!