msi. Troubleshooting when installing programs from Windows Installer ".msi" Other ways to troubleshoot the problem

The Windows installer problem is one of the most common problems that plague Windows operating systems.

The error may appear regardless of your OS version.

Cause mercy to appear

Viconati can scan the OS using Sfc /scannow. You need to enter them in the command line window.

You can launch the command row in two ways:

• Start -> All programs -> Standard -> Command row.
• Start -> Open and enter program name cmd.exe

Through a number of prompts you will be given detailed information about OS disks, zipped files, problems with services and other system programs.

The command line is not only about detecting zipped and corrupted files, but also replacing them with useful ones.

After scanning, close the command row and restart your personal computer or laptop. Try to start the process of installing any file.

Microsoft also offers users an automatic utility that can solve the installer problem.

Go to the web address of the company's official website https://support.microsoft.com/ru-ru/mats/program_install_and_uninstall

In the window, click on the “Run now” button. The utility will update the installer with the correct configuration.

Please note that the utility does not work with the eighth version of the operating system.

Adjusting installer access to msi files

An installation failure may cause a problem that prevents access to msi files. Koristuvach can solve this problem on his own.

Follow the instructions below:

• Find your installation file and click on it with the right mouse button;
• Select the window of the authorities;
• Go to the security tab;
• In the text field of the group, turn it over to indicate that it is under the name “system”. If this is not available, you will need to add it manually;

• To add a new account, click the Change button, and then click the Add button;
• In the text field for the name of the object to be selected, write the word “system” (without tabs). If you are using the English version of the OS, enter the word System;
• The entered word may mittevo article under the chair, as shown in the picture below;

• Check the box next to the full access field and click OK;

Now the installer can deny access to the compiled file. The installation of the software was completed without any problems.

Please note that in some cases, access to the installation file may be blocked by anti-virus software.

To resolve this variant of the problem, you need to log into the operating system under the administrator account, turn on the antivirus and enable the antivirus settings in the settings for compatibility with other versions of the OS, as shown below hotter.

Troubleshooting Windows Installer - Troubleshooting methods

NSIS (Nullsoft Scriptable Install System) Error means that it will not work if you go to install something, but the file will be deleted or enabled, otherwise it will not damage your system. The message NSIS error - Error launching installer means that the installer has failed self-check because it has been modified from its original form. If the program is adjusted to function, the program will be transferred and will not function properly.

In order to allow this, the installers must start chaining from the cob.

There is a notice that you are about to receive the following error:

1. The files for the software you have downloaded from the internet aren’t complete
2. The physical media (CD/DVD) you’re installing from is damaged
3. The requested files may be modified and different from the original.
4. The required hardware, such as a CD or DVD drive, is not required
5. You have a virus on your computer

There are a bunch of simple ideas that you can try and earn. All problems are forgivable, and you can try to adjust the program after you decide to choose.

Method 1: Repair Corrupt Edge Files

Download and run Reimage Plus to scan and delete corrupt and missing files from , and thee see if the issue is fixed if not then try the other methods listed below.

Method 2: Rename the installer

This is extremely simple, and quite annoying to worry about NSIS error, but you can try it if you know better. Locate the setup file, and Right-click it, and select Rename from the sheet.

Click it, and press F2 on your keyboard.

Change the name to something simple which only has one word. In order to change it to Softwarenamesetup.exe. Try running the setup again and see if it works.

Method 3: Download the setup from another source

The installer file that will be downloaded may be corrupted, which will give you an NSIS error. Because this is the case, you might want to start setting up elsewhere, as there might be a fully working, non-corrupted installer in another place. Try doing this with few installers if the second one doesn’t work.

Method 4: Install the software using the Command Prompt

The Command Prompt is a powerful tool, and you can choose what you find. Click Start and type cmd and choose Run as administrator.

When it opens, drag the installer in the middle of the window. You will see that the path to the installer will show up on the Command Prompt screen. Don't press Enter yet. Press spacebar, and type /NCRC after Setup path.

If you have a proof, the file is an executable file doesn’t show up when you drag it into the Command Prompt (Window) then manually type and browse to the location.

Then press Enter and the setup should start. The /NCRC The team will work with the skip installer for corruption, and will work until the end to make amends with him. Keep in mind though that there will be adjustments to your software, unless there is a serious error, it will not work.

Method 5: Check System Language

Hold the Windows Key and Press X and choose Control Panel.

In Control Panel type Language

From the Language pane, choose Change date, time or number formats from the left pane and then go to the Administrative tab.

Choose Change System Locale to your country's language. Since the software is in different languages, you can change the Language but that will also change the Language and Keyboard layout.

Method 6: Move Installer to Another Drive

In some cases, the installer can make adjustments in setup if it is in a specific disk. There, if you have a lot of games on your computer, you can go to the next game. For that:

1. Right-click on the “ (installer name)setup.exe" and select " Copy“.
2. Open the partition and select Paste“.
3. Double click on the executable and check to see if the issue persists.

Method 7: Scan your computer for viruses

Since all security methods have been removed, your computer may be infected with a virus that is associated with software software, and you won’t know, and you won’t know. You can get an antivirus for your team, or a quick scan, rather than a quick one, as it quickly scans private files and folders that could be potentially important for a protective file that is infected with a virus.

Regardless of the result of seriously sending the file to the file, or a false error message can lead to a problem in the operating system, but this is one of the ways to help you get help.

The problem has been expanded among the native Windows operating systems of any version - msi removal during installation of a program from a file with extensions.msi. In this article, I will describe the most common problems with the Windows 7/10/XP installer and their variants, and also provide a video of the power supply.

Files with extended.msi are the initial installation packages (distributions) in which the program is installed. Under the initial "setup.exe" command, the system uses the Windows Installer service (msiexec.exe process) to launch the msi file. In simple words, the Windows installer unzips and launches files from the distribution. If Windows Installer does not work, there will be a lot of problems.

Zagali, I don’t fight too hard, because... After the bad news about the pardon, it was completely unclear what to do next. Microsoft specially developed the Windows Installer to expand the capabilities of installing programs (mainly for system administrators), but did not pay due attention to the trouble-free operation of this service or would like to provide adequate notification of problems. And now we have to dig it up 🙂

Problems may arise from the operation of the service itself, or they may arise during the installation process of the program, if everything is set up, in principle, correctly. In the first case, you need to repair the installer service, and in the other case, the problem is with a specific file. Let's take a look at the two options, and then another one.

MSI file downloads

Very often, problems appear through insufficient system rights to files or folders. It is impossible to say that Windows Installer does not work, so all you have to do is add the required rights and ask for everything. Just yesterday I stumbled upon this fascinating distribution kit.

"Error reading from file "file name" verify that the file exists and that you can access it" (Error 1305). Shift "Reading from the file... check which file you are using and what you have access to." Chi is not a fool? Of course, the “Repeat” button does not help, and skating ruins the entire installation. The recognition of the special semantic significance is also carried out, because The file is definitely there and I have access to it before, otherwise I just couldn’t launch it and cancel the notification, I still feel like it’s in English :)

And the catch is that it’s not my fault that my mother has access to the file, but the Windows installer, or rather the system itself. It seems quite simple:

Now the installer won't show up! You can add access to the entire folder if you install programs, for example, to the “Downloads” folder, like mine. There seems to be a lot of problems with access rights:

Windows XP will not have the “Security” tab, since simple access to files is limited. To get into it, you need to go to "Start -> Control Panel -> Folder Power -> View" Then turn on the option “Vikoristovat simple shared access to files.” In limited versions of Windows 7/10 and XP, the “Security” tab is completely absent. To use it, you need to log in as an administrator.

More ways to troubleshoot the problem

Descriptions of the method will help with different notifications, with different numbers. For example, you can download msi files like this:

• Error 1723
• Internal Error 2203
• Systemic treatment 2147287035
• Notice “It is impossible to open this installation package”
• Milk 1603: By the time it was established, the small law became inexhaustible

In all these cases, it can be helped by setting file permissions and/or system folder permissions. Check whether the “system” can access the time files folder (you can uncheck the warning “The system cannot open device instructions or files”). For whom:

After pressing “Enter” you can change to “normal” and you will move to the real time folder. The rights to it need to be verified. I also recommend clearing your time folders of everything that has accumulated there, or better yet, deleting them and creating new ones with the same names. If you can’t see the folder, read it, but it’s not obligatory.

If the Windows Installer service still doesn’t want to work, change the rights to the folder "C:\Config.Msi", here the “system” also has new access. In this case you could get the “Error 1310” warning. In any case, go to the folder WHERE you are installing the software and have all the rights.

Registry settings and services

The first way to remove the problem is to update the operating parameters in the Windows Installer registry.

To do this, download the archives and run to create two reg files corresponding to your version of Windows. Please wait while importing settings.

Important! Before the rest of the day, it’s important! If this method does not help or you will become worse, you will be able to recover until you become better.

For Windows XP or Windows Server 2000, install the remaining version of the installer 4.5.

If this does not help, then re-register the components:

1. Press “Win ​​+ R” and enter “ cmd". Then enter the following commands in the black window:
   MSIExec /unregister
   MSIExec /regserver
2. The answer may be empty, but there will be no shortage of mercy. If the problem is not resolved, enter the command
   regsvr32 msi.dll
3. Close the black window

If you write that it is invalid, you need to run .

If the commands failed, but it didn’t help, run msi_error.bat from the archive, reverse the result.

The last option is to download the Kerish Doctor program, which has a function for fixing the installer service and a variety of other Windows problems.

If there are many programs that use the .NET Framework, you will not be asked to install the remaining version of this package. And finally, another good thing: if you want to add one folder to the distribution file with a space on the beginning of the name, then remove the space. This is such a simple way to solve your problem :)

Suitability of pouches

Problems with the Windows installer are even unacceptable, there are a lot of them and it’s obvious where to dig. One thing is clear - the system has failed and it is necessary to update it to work. Sometimes nothing helps and nothing can be done. However, don’t rush into it, try asking for help on this forum. Exactly describe your problem, tell us what you have already done, what information you have rejected, and perhaps we can help you! The world is not without good people :)

When installing programs that use the Nullsoft Scriptable Install System installation package for your installation, you may encounter a problem. NSIS Error with the text "Error Launching Installer" or "Installer integrity check has failed".
Also, you can send it to nsis.sf.net/nsis_error. How can I fix it?
Since you have been attracted to the program from the Internet, then most likely the reason for this is that the program installer is simply not normally attracted to it. Just re-enable it and run the installation. Zazvichiy, she helps herself.

Yakshcho still drinks pardon NSIS Error, then try downloading the program from another site again. Possibly, there is a bit of a copy there.
You can also try the shortcut for downloading with another browser or Download manager.

What else can you try?

— copy the installer to another folder. Turn it around so that it doesn’t take revenge on Russian letters – only Latin ones!

— Please make sure that the name of the program installer does not have Russian letters, gaps or special characters. Tse tezh can Wiklikati pardon NSIS.

— Uninstall the antivirus, it is possible that it is blocking the installer. However, it is not obligatory that the program will take revenge on the virus. It’s just that anti-virus programs can block any programs under suspicion. It's okay.

— Update your anti-virus software and turn over your computer. The NSIS Error can be caused by any virus corrupting the installation package by writing part of its code there. After checking, re-install the installation package and run it.

— Turn over the logical drive of the computer on which the installer is located, using the chkdsk system utility.

As if raptom didn’t help anything NSIS Error However, it does not allow you to install the program - then try to get it from friends or acquaintances and check the installation on their computer. Does it work without problems? Copy it to a flash drive and carry it with you. Once you accept this, you will eliminate problems with the installation file itself, checking it for practicality.

ESTABLISHMENT OF MILK This could be caused by incorrectly configured system settings or irregular entries in the Windows registry. This change can be corrected by special software that updates the registry and adjusts system adjustments to improve stability.

If you have ERROR LAUNCHING INSTALLER installed, we recommend that you Zavantazhiti (ERROR LAUNCHING INSTALLER) Repair Tool .

This article contains information about what you are looking for before fix ERROR LAUNCHING INSTALLER both (manually) and (automatically) , In addition, this article will help you to shoot some common error messages related to ERROR LAUNCHING INSTALLER that you