The iPhone burns the apple and the stew. What's wrong, since the iPhone doesn't stick in. Killing software security

There is a known problem: if the iPhone does not turn on, the apple and device freezes or freezes completely. The cause of such a problem may be simple, which is easy to fix on your own. If the customer's actions turn out to be ineffective, then a visit to the service center is a reasonable time.

What's wrong, because the iPhone won't connect, but the icon is lit

It’s a shame that the smartphone “hangs” on the apple and doesn’t get hooked. Particularly, there are similar scams among hackers, which give advantage to the jailbreak system. It is not easy to determine the exact cause of such a malfunction, but treatment in most episodes is elementary: it is recommended to re-invent the device to restore the efficiency of the device.

For this purpose, stretch for 10-15 seconds. “Home” and “Power” keys (for models up to the 7th generation inclusive) or instead of “home”, use the button to change the volume (for 8 and higher). Before manipulating the device, it is necessary to connect it to the PC or the storage device. After this procedure, the iPhone starts up and operates in default mode. The maysters should remove the remaining programs and install them again. Due to faulty programs, the iPhone often does not turn on, and the apple burns for a few seconds.

If the device operates incorrectly, check the connection to the charging device and check the cable. The brand cord is too creaky, so he behaves with it carefully. Charging the “left” batteries that fit the connector does not always indicate the problems of the distributors: supplying inadequate voltage to the battery can cause the battery to fail. It turns out that the iPhone does not turn on ten hours after it crashes. Damage does not appear immediately for several days, or the current device can be used as before, and then it freezes.

Flashing a smartphone: if you need help

If the iPhone, as before, does not turn on while charging, then the problems could arise due to serious malfunctions of the software. Complex problems like this will be solved by reinstalling the system. Is there a black screen with an apple and no other image? Such confusion can occur after installing unverified programs or inserting incorrect settings in settings. You can update your smartphone's operation using some simple manipulations - you need to enter the mobile DFU mode. Be consistent:

  • Turn off the device (the apple is not supposed to glow).
  • Connect the USB cable to the PC, check the current version of iTunes, launch the program. Don't connect your iPhone yet.
  • Press the offending keys on the device – “Home” and “Power”, releasing the rest after 10 seconds. Do not release “Home” for another 10-15 seconds.
  • Connect the gadget to a USB cable.
  • Once iTunes recognizes the device, it proceeds to restart the system.

A nuance: in new models, the replacement of the “DIM” button causes a change in thickness. If the flashing did not help and the iPhone still does not turn on, the icon lights up and goes off, then you will need professional diagnostics.

The phone in DFU mode has a black screen without a logo that lights up. Only after the flashing is completed, the apple will appear.

Why won't my iPhone charge when charging?

If the iPhone does not turn on after being dropped, the cause may be various damages - from microcracks to the removal of the main chips. Problems arise in the operation of charge controllers and life, especially after significant inactivity of the device.

Software failures, shocks, and penetrations of faults can cause the NAND internal memory chips to go wrong. This leads to frequent wastage of data, and there is no possibility of renewing it. It is easy to replace the chip by installers who have installed the component’s firmware using the current version of iOS.

Signs of such a breakdown:

  • The device works a lot, you can get involved and become re-engaged in passing.
  • The data is known.
  • Programs take a long time to launch.

Reasons why the iPhone won’t turn on, the apple burns and freezes indifferently. If simple steps do not help, you should trust the professionals. Special equipment will help identify any breakdown and promptly carry out repairs.

And with one such mercy, we will try to understand and explain the reasons for guilt and possible solutions. The drink is called a “hot apple,” but if the apple starts up on the iPhone, nothing happens.

Let's overcome all possible reasons for the “apple to burn”

  • jailbreak-yours crazy with Cydia;
  • problems with custom firmware;
  • iPhone malfunction

The solution to this problem lies in the immediate futureJust reinstall the iPhone firmware or try a friend and reset the jailbreak via "Safe Mode"

Reinstalling and updating iPhone

If the device does not start, then enter it into DFU mode. The procedure is not complicated:

  • connects to iPhone computer;
  • Press and hold the power and home buttons for about ten seconds;
  • I release the power button after 10 seconds, but lose the jammed Home button;
  • After this, the display of the device does not turn on, but iTunes on the PC on the device.

You can start updating, in which case, after installing iOS, iTunes prompts you to update the system from a backup copy or set up your iPhone, iPad as new.

Another way

Another way to fight “Scorching apple” is more complex and has more terpene. Success is not guaranteed, but you can try

Let's take a look at the problem with Cydia tweaks. You can customize your iPhone without Cydia tweaks

  • connect the device;
  • press the increase volume button “+”;
  • Quit the device and wait until you are fully connected to iOS without releasing the “+”.

If the device is enchanted, then the problem lies in the recently enchanted tweet. If so, go to Cydia and uninstall the problematic jailbreak tweak.

If the device is not enchanted:

  • Restart the device;
  • Please call me on your iPhone
  • If you were able to get through, you can revoke access to the file system, but you can either reset or update your iPhone following the instructions above.

The device will be informed and this means only one thing - the release is expected at the final moment of installing iOS. With the help of iTools, iFunBox, you can connect to the device’s file system and will not be able to troubleshoot file problems yourself. You can only update files if you have backup copies or if your iPhone or iPad displays “hot apple”, then all you have done is dig around the file system and you probably have backup copies.

For the ruler of the “apple”, the most unacceptable device is the “apple”, which always glows on the display, otherwise the “black screen” has faded. The device is turned on until the activation cycle is completed or does not turn on at all. Most often, there is a malfunction of the gadget’s motherboard and only a service center can help.

But at the same time, a lot of problems can be corrected without leaving home, either programmatically or with the help of inconvenient tools. Required inexpensive tools, a computer, at times and respect. And also the necessary access to a spare parts store, where you may be able to buy components that came out of order. As it seems in advertising slogans - “How to pay more?”

So, let's figure out what problems can arise if the iPhone or iPad itself freezes, why the apple burns and goes out on models 4, 4s, 5, 5s, 6, 6s, which occurs in such situations.

Why the iPhone won't stick: making a diagnosis

Similar symptoms may be the result of various malfunctions. The correct diagnosis is 90% success, so below we will carefully analyze possible options for breakdowns.

Don't get involved

The devices cannot be dried, and the reasons for this are:

iPhone won't turn on, Apple light stays on and goes off

The apple glows white on the screen either continuously until the battery is discharged, or the device cycles through the skin. This may be due to the following reasons:


How to solve problems

All malfunctions are traditionally classified as problems with hardware and software. To control software settings, we need a USB cable and a computer.

For celebration, the list will be much broader:

  1. A suction cup with a diameter of 4-5 cm. You can buy it cheaply, in a radio store, or you can buy it cheaply, and the ones you use to mount it to the wall at the bathroom. There's a real stench, though.
  2. Soldering iron, acid-free flux and fine solder.
  3. Combination device (tester), the cheapest possible.
  4. A set of anniversary twists.
  5. Universal charging device “toad”
  6. Alcohol, preferably isopropyl alcohol.
  7. Penzlik with bristles of medium hardness. The edge needs to be trimmed so that it is even.
  8. It’s like you don’t have any more – there’s a lot of pressure on the stand.
  9. A box for fastening and other parts, keeping the table and lamp clear of clutter.

Low battery discharge

If blocked as a result of extreme discharge, the battery controller will not allow charging using standard methods.

Therefore, to resolve the problem, you will need to open the device, remove the battery, and check it. If the battery is a good idea, charge it using an additional universal charger. To get started, let’s try to use a third-generation iPhone, since the work will be the greatest with them.

  1. Removable SIM card tray
  2. Using additional screws, you screw two screws, right-handed and left-handed, into the connector for connecting the cable.
  3. We move the suction cup along the axis line of the iPhone, as close as possible to the Home button. Gently and carefully pull the suction cup up, removing the lower part of the frame of the screen module from being sealed with the iPhone body.
  4. By lifting the lower edge of the display module two centimeters above the body with a plastic spatula, we successively connect three cables at the top of the body. Robimo is even more careful - the train is easy to damage. Having seen the cables, the display module can be removed and put away.
  5. The main board contains button cables, headphone jacks, an antenna and a speaker connection.
  6. We tighten all the screws around the perimeter of the device.
  7. Using a plastic spatula, we pull and pull the camera module up.
  8. Rushing uphill and back, we pull the board from the housing.
  9. The battery is glued to the bottom of the case with double-sided tape. We warm up the case from the back side with a hairdryer (without fanaticism) and, after scooping up the battery with a plastic spatula, remove it from the case.
  10. Using the tester, you can see the voltage on the “plus” and “minus” contacts. If it is below 3.2V, we connect the battery to the universal charger, as shown in the little one.
  11. If the voltage is lower than 3.2V, connect a universal charging device to the contacts of the battery controller.
  12. The battery is charged for 1–2 years, while monitoring the voltage with a tester. If it reaches 3.7–4.2V, the charge is applied.
  13. We install the battery in the iPhone and remove it in the first place.
  14. Let's try to squeeze the apple.

The power button does not work

The power button is made up of two elements: a fusible material and a plastic piece, which you wash from the body and press on with your finger. If enough debris accumulates between the tool and the button, the tool cannot reach the button and the iPhone does not engage. Right now we’ll try to buy some alcohol, medicinal or isopropyl. Every time you do not take a burner, toilet water, or glass cleaner for this operation. In these waters, alcohol may contain a small amount of water, and it will leak into the middle of the device and cause corrosion.


The cable connection socket does not function

The cause of this malfunction may be a blockage in the socket or damage to the contacts of the new one. To fix the problem, you need to do the following:


The battery is bad and will need replacing

The simplest breakdown is to simply unplug the iPhone and replace the battery with a new one. You can buy a battery in one of the many online stores that sell spare parts for mobile phones.

If you do not contact the service center, the chances of getting an original battery for replacement are zero. When buying a battery, be sure to check it for leaks to avoid swelling or corrosion. If it is possible, check the voltage with the help of a tester.

The device hangs on the apple after being sent to factory settings

This problem most often occurs with devices purchased second-hand or in online stores that sell used equipment. Most of the iPhones brought overseas for resale are contract devices of mobile operators. In order for such an iPhone to work with any operator, it is necessary to unlock the radio module. The sellers will go through this procedure themselves, even if they position the device as a Neverlock, so it works with any SIM cards. However, not everyone informs buyers that such a device cannot be upgraded through iTunes or reset to factory settings - the result will be a white apple on the screen.

To turn your iPhone to its normal operating position, you need to do the following:


iPhone is in DFU mode

You can independently exit the DFU mode of devices without discharging the battery to zero. If you don’t want to check for such a worrying hour, you can solve this problem programmatically:

For more help iTunes

  1. Connect the device to your computer and launch iTunes.
  2. Check if iTunes recognizes your iPhone in update mode.
  3. At the same time, press the “Home” and “Live” buttons on the device and check to restart your iPhone.

For additional help TinyUmbrella programs


Amat victoria curam – help to love preparation. This is a harsh phrase, however, to address the problems in the “apple” devices. Browse thematic resources from the region. After completing the theoretical part, prepare your work place, stock up on necessary supplies and your iPhone will definitely come to life!

If you didn’t succeed, or the breakdown turned out to be too serious, you can now contact the service center.

Application © 2021 Mobile and computer gadgets