Program for flashing Chinese flash drives. We update flash drives. Instructions for updating Kingston flash drives Firmware for Sandisk 8gb flash drive

Before you start working, think about how much valuable information is saved on it? Since these data are important, it would be better to try updating them before and after updating the firmware. For this purpose you can quickly use the Recuva program or another similar one. And since important data, even important values, are being saved there, then it is better not to do anything on your own. Bring the flash drive to a specialized service center, where the counterfeiters can update it without such a high risk for your data.

Updating the flash drive on the Kingston DT butt

Our application will have a Kingston DataTraveler Elite 3.0 16GB flash drive. She worked until the hour of singing, until one o’clock it was normal, but then the miracles began. If you try, delete or record the data, the entire process will ensure that the table is completely intact without collapsing. After reconnecting, the system received a notification about disk formatting.

Based on the low importance of the data on the device, a decision was made to format it. The formatting process dragged on for an alarming hour and was not completed. There was no more information when it happened that a viconati format was recently tried.

We connect our faulty flash drive and launch the utility. On the top of the program window there will be a button to grab the data and click on it. After that, we’ll get all the information ready. We pay special attention to the meanings of VID and PID.

Re-flashing a faulty Kingston flash drive

For now we are turning on the storage device. We can launch the flashing utility (our program is called MPTool.exe). I'll name the file with the program readme.txt then look into new. For everything, there are instructions. I appreciate that utilities vary and yours may look different. However, the interface and the principle of operation may be similar.

After starting the flashing program, you need to reconnect the flash drive. After this utility, select the device. Now I can no longer just press the start button and rewrite the firmware. It's been a while, but the process won't be completed.


Once the program is completed, let you know that everything went well.


Then the system will inform you that it needs to be formatted before working with the device. It’s better to immediately connect the flash drive, and then connect it again. And only after this we will show you the formatting process. Having completed all these procedures, you can check the work of the flash drive. Everything works as smoothly as it should, and files are adequately copied and read. Do not forget that some periods may be much different, in addition to those described in this article. Alas, the whole process looks like this.

That's all. Take care of your flash drives, make sure you find a device safely.

This may be of benefit.

The famous accumulative companies of Transcend are being exploited by even a large number of investors around the world. It’s not surprising that flash drives are inexpensive to purchase and last a long time. However, they are dealt with as quickly as possible - the information disappears through the accumulation of a corrupted storage system.

This may happen for a variety of reasons. Some flash drives come out smoothly through those that have been missed, others are simply because they are already old. In any case, a skin care professional, who has a famous nose from the Transcend company, is obliged to know how to update the data on the new one, as they were spent.

Find proprietary utilities that allow you to quickly update data from Transcend USB storage devices. This is a program that is suitable for all flash drives, but Transcend products work especially well. In addition, often when working with flash drives from this company, the standard method of updating Windows data is used.

Method 1: RecoveRx

This utility allows you to retrieve data from a flash drive and protect it with a password. It also allows you to format storage files using Transcend. Suitable for all major Transcend products and proprietary software for these products. To quickly use RecoveRx to update your data, select the following:


Method 2: JetFlash Online Recovery

Another proprietary utility from Transcend. This wiki looks very simple.


Method 3: JetDrive Toolbox

It’s good that developers position this tool as a security program for Apple computers, but on Windows it also works even better. To download updates using JetDrive Toolbox, download the following:


JetDrive Toolbox, in fact, works the same way as RecoveRx. The difference is that there are a lot more tools here.

Method 4: Transcend Autoformat

If none of the standard update utilities help, you can quickly use Transcend Autoformat. However, in this case the flash drive will immediately be formatted, so there will be no chance of extracting any data from it. The consistency will be renewed and ready for work.

Transcend Autoformat is extremely simple.

  1. and run it.
  2. You will get the writer of your nose with information. Please indicate your type below – SD, MMC or CF (just put the icon next to the required type).
  3. Click on the button " Format", to start the formatting process.

Method 5: D-Soft Flash Doctor

This program is famous for the fact that it works at a low level. Judging by the words of the correspondents, it is even more effective for Transcend flash drives. To repair a significant nose using D-Soft Flash Doctor, proceed as follows:


If repairs using all the described methods do not help to update the device, it can be done quickly using the standard Windows update method.

Method 6: Update Windows

Judging by the results, 6 methods are the most optimal for a damaged flash drive from Transcend. Less useful in this regard is the EzRecover program. Read about how to use it in the overview on our website. You can also speed up the process using D-Soft Flash Doctor and JetFlash Recovery Tool. If these methods do not help, it is best to simply buy new valuable information and use it.

A lot of people don’t want securely installed flash drives, as a result of which the storage devices stop working correctly: they are not recognized by the system, formatting is lost, they don’t read/write data, they show the wrong volume (for example, 14 GB instead of 16 Gb). If you are faced with a similar problem, then nutrition, how to renew a flash drive, will become relevant for you.

How can you improve the usefulness of a flash drive?

Anyone might think that updating a flash drive is a lot of fun. Accumulators Transcend, Kingston, A-Data and other manufacturers have flooded the market, making flash memory cheap. Memory cards and flash drives with a capacity of 8 Gb to 32 Gb are not so expensive that you can’t easily throw them away and buy new ones. However, old flash drives and Micro SD memory cards never get thrown away: they lie on the table and await their renewal.

Renewal is possible if the flash drive or memory card is not completely “dead” (death occurs when the controller burns out).

If the accumulator simply does not appear or shows an incorrect operation, then the reason for this behavior is most often a failure in the controller firmware. We will discuss in detail below how to restore a flash drive after such a failure.

Saving information and finding the software you need

Since important information is stored on a flash drive or SD card, it is necessary to download the data before updating the firmware and updating the controller (and at the same time the efficiency of the storage device). You can use the additional Photorec utility to work with files without damaging the file system.

After removing the necessary information from the SD card or flash drive, you can start searching for a utility to flash the controller firmware. First, to flash the controller, you first need to identify your model. For this website, flashboot.ru:


After completing the verification and removing the required information (VID PID of the drive), you need to use the utility to check the functionality of the flash drive or SD drive. Go to the website flashboot.ru and open the “iFlash” tab. Here you need to enter the VID PID values ​​and find out the required manufacturer of the memory card or flash drive (HP, Generic Flash Disk, Protex, Oltramax, Smartbuy, etc.).

If your model of flash drive and SD memory card is not in the database of the online service, then there is nothing terrible: make sure that the VID PID and the driver are saved. If you have obtained the necessary data, you will need to select information about the exact controller model for your firmware and update, as well as the name of the associated utility.

The table has the “Controller” and “Utility” columns. Please pay attention to the need and duty - controllers of flash drives and SD cards of 16 Gb and 32 Gb can be modified. You need to copy the name of the utility and download it through the “Files” section on the flashboot.ru website or from another device. Often, when updating the program, there are instructions for proper operation, which you should carefully read.

Controller firmware

Let's say you have a Protec flash drive with a capacity of 16 Gb. You will find out the VID PID through the iFlash online service and download the controller firmware utility without any costs. What are you going to do? Go ahead and update your flash drive (SD memory card).

Universal instructions for updating all flash drives:

If the firmware is successfully installed, then it is your responsibility to check the positive status of the flash drive - OK or Good. If there is a problem during the operation, then an error code will appear: the decoding of this can be found in the utility found for VID PID and other online services.

Updating any flash drives (SD cards) is carried out approximately according to the same scheme, these instructions can be slightly different for different utilities: you need to know the program for flashing the controller using the VID PID and run the update of the USB drive.

To update the flash drive, you need to further format it. This can be done using standard Windows tools or with additional special programs. It is recommended to run externally rather than formatting it in Swedish. After spending a little more than an hour (especially since the person’s storage capacity exceeds 16 Gb), then you will be impressed that the flash drive is now completely clean and useful.

USB flash drives have quickly become popular in our lives as they are inexpensive and at the same time provide a reliable way to save data. The gigabyte capacity of flash drives is low, and the ease of handling it (combined with its small size, resistance to vibration and temperature surges) makes flash drives so popular.

Well, as with any technically complex device, a flash drive is also subject to a variety of inconsistencies, starting with file system failures or microprogram failures, ending with physical failures (as a rule). Due to the low quality of the device itself, repairs may not be corrected and the accumulated funds are sent to the waste disposal facility. Or it’s not on the smytnik, but lying here on the police or in a desk drawer. And at this time, there are a lot of problems with the device, you can try to solve it on your own with a high probability of success.

Yakshcho The flash drive has stopped showing up, so I’ll attach it to memory or else Readability from flash drives or else recording to a flash drive even more fell into a deep depression, as well as File system corruptions are constantly occurring, you can try and reflash the flash drive. Chinese flash drives, which are now popular, have great benefits; files that are recorded and not read back can also be deleted!

The flashing procedure itself is based on the updated microcode of the USB controller, but in this case you can avoid a number of low-cost actions:

  1. Removal of “bad” blocks from memory volume. Use the flash drive in your child’s hands (for the purpose of turning off the blocks), otherwise the stable robot will turn around.
  2. Renewal of the true duty of the hoarder. This corrects the problem if the flash drive is flashed to a higher level than the memory chips installed. Then the data is simply rewritten cyclically, making it difficult to read large files that were previously recorded.
  3. Divide the flash drive into sections (also creating virtual CD-ROM sections), additional sections that can be mounted and read.
  4. Changing identification data (VID, PID, Serial number). .

So, if you decided to flash the firmware, remember one simple thing:

Flashing is fatal for data stored on memory chips. There is no guarantee that the data will be updated (such as the fact that the flash drive will request after flashing).

Let's continue.

This indicates the model of the controller chip

The best way is to open the casing of the flash drive and read the model of the controller chip (a small chip, usually square in shape, protruding from the sides). Memory chips are most often straight-cut, with sharp edges on both sides:


We rewrite all the information from the chip: Phison(brand) that PS2251-60-5(Series). We need this data to find the required firmware. If the firmware is selected incorrectly, the flash drive may be damaged, which should be taken into account.

If it is impossible to remove a flash drive (for example, without zipping the case), you can quickly use programs to remove the flash drive chip using a software method. This method is less reliable and will be more popular. I especially like the ChipGenius 4.00 program, in addition to other similar functions:

Also, as shown in the screenshot, you can pull out VID and PID flash drives. This is obviously Vendor Identifier and Product Identifier.

Finding the firmware for a flash drive

Are you kidding me? As usual, on the Internet. Zokrema, check out a good resource – flashboot.ru, “Files” section for searching for the controller model or iFlash for searching for the VID/PID database:


Searching for VID/PID gives a lot of results, you need to select those options that best describe our flash drive (model, capacity, etc.).


If you need to know at least the same firmware for your controller model, you will need to try different options, so that the first time you may not be able to get the firmware assigned to that chip.

Flash drive firmware

The best looking program for flashing flash drives is approximately new. We pull and insert the flash drive (it is rebooted in advance, so that no other flash drives are inserted - this will be simpler and safer). If the flash drive appears in one of the program fields, press the Start button (for the beginning of the firmware) or if you want to dig into the detailed settings (closely create an additional section, etc.), then press the Setting button.


The firmware process can take up to an hour, since blocks are tested for read/write access, bad blocks are deleted, the entire memory space is reformatted, etc. Once the process is completed, you can check the flash drive on the system itself.

By using cost-free programs for repairing flash drives, you can renew USB drives and again increase the ability to use them for writing and reading. In which case you have to sacrifice data, which you may not be able to renew. Another alternative to using these programs is a non-working flash drive and a lack of information.

Diagnosis of the problem

The main signs that a flash drive will require repair are:

  • Providing a notification about the protection of a USB device for copying or an unknown device;
  • The impossibility of saving money with a regular computer;
  • Subject to the list of disks;
  • Inability to read (and, therefore, write) information;
  • Negative results must be updated or formatted within an hour of trying.

Alternatively, the problem may lie with the USB connector or the lack of drivers on a particular computer. Ale, if problems are identified on the skin device, then everything is on the right in the accumulation. And you can try and renew it.

Utilities for flash drives

You can try to reverse the functionality of a USB storage device using system utilities. If the problem is serious, the best option is to update it through a program specifically designed for repairs. Some manufacturers produce various accessories that are best able to cope with the repair of their own brands. If you want help, you can update your USB-carriers of any brand.

Porada: Special programs are provided for repairs, not renovations. It is not recommended to use additional information from them.

JetFlash Online Recovery

To update the useless Transcend accumulators, the software company has created a special utility, which you can find and download freely on their official website. It's called JetFlash Online Recovery and it's still growing in popularity. There are only 2 commands here:

  • Correct the flash drive, erasing all data;
  • Renew from saving data.

You can quickly get rid of the varto in another way. And if we can’t help you, first.

Silicon Power

On the website of the Silicon Power company, the support section also has a program that is updated and can be canceled without costs. It allows you to renew, directly, flash drives of this brand and is called SP Recovery Tool Utility.

Adata

The Adata distributor on the official website also has free access to a program for updating USB storage devices. Since the USB Flash Drive Online Recovery failed to recover the information, the flash drive can be repaired by wasting the data.

Kingston flash drive repair

The Kingston storage manager will be able to get back an entire flash drive after running the MediaRECOVER 4.0 Digital Image Recovery program. In some cases, the program may hijack some of the data, using USB memory formats. Updated, most of these programs support video, audio and photo files, as well as Word documents, e-books and spreadsheets.

Universal programs

In addition to specialized software that repairs mainly accumulative products of its own brand, there are a number of programs that can renovate the workbench of most devices. One of them is the D-Soft Flash Doctor program, which offers the following advantages:

  • Menu and documentation in Russian language;
  • The number of localizations for certain brands;
  • Creating an image of a flash disk for further work not on the storage device, but on its virtual copy.

Advance programs that are not so familiar, protect them without costs and remain effective, e:

  • ChipEasy, this makes it not only easy to renew a flash drive, but also to recognize the manufacturing company, as its name is not written on the case or has been erased over time;
  • Flash Drive Information Extractor is a utility designed to provide the maximum amount of data about a flash drive at once from its updates;
  • CheckUDisk – for all its simplicity, it is a quick search tool that works very quickly and provides detailed information about add-ons.

How to find a program to repair a flash drive

It is not possible that, having tried all the best methods, it will not improve the functionality of your USB flash drive. In whose case you are ready to do the following:

  1. Use the Chip Genius utility;
  2. Find out using VID and PID, as well as the name of the chipset located in the middle of the flash drive;
  3. Go to the iFlash website and enter 2 numbers;
  4. Find your storage model from the list.

Now it is no longer possible to know the main program from the Chip Model station, with great respect for the safety of controllers. You can find it and download it freely on the Internet. The principle of their action is almost the same - greater emphasis on the renewal of results, less on the order of data.

Thematic video:

Application © 2023 Mobile and computer gadgets