Connecting a droneless router tp link. How to set up a Wi-Fi router TP-Link TL-WR841N - step-by-step instructions. Static IP – vikoryst provider data

Have a nice day.

In order to organize a drone-free Wi-Fi connection at home and provide Internet access to all mobile devices (laptops, tablets, phones, etc.), you will need a router (about this, there are a lot of homeowners in the course). It’s true, not everyone dares to connect and configure it on their own...

In truth, this is true for the most part (I do not accept the blame, if the Internet provider creates such “networks” with its own parameters for accessing the Internet...). In this article, I will try the most common food signals that I feel when I have a connected and configured Wi-Fi router. Come on, let’s see...

1) What router do I need, how should I choose?

Perhaps, first of all, you need to set up your own equipment if you want to organize a drone-free Wi-Fi network at home. I would start with a simple and important point: what services does your Internet provider provide (IP-telephony or Internet TV), what Internet speed do you provide (5-10-50 Mbit/s?), and why protocol for connecting to the Internet (for example, currently popular: PPTP, PPPoE, L2PT).

Tobto. The functions of the router are starting to show up on their own... And since this is a great topic, I recommend that you read one of my articles:

search and choose a router for your home -

2) How to connect the router to the computer?

As a rule, the package includes, right up to the router itself, a life block and a hemline cable for connecting to a PC (div. Fig. 1).

Before speaking, please note that on the back of the router there is a number of sockets for connecting a bridging cable: one WAN port and 4 LAN ( There are a number of ports depending on the router model. The most advanced home routers have a configuration similar to Fig. 2).

Rice. 2. Typical rear view of the router (TP Link).

The Internet cable from the provider (which used to be used for all connections to the PC) must be connected to the blue port of the router (WAN).

And with the cable that comes with the router, you need to connect the computer’s edge card (where the provider’s Internet cable was previously connected) to one of the router’s LAN ports (div. Fig. 2 - the same ports). Before speaking, you can connect several more computers using this method.

Important moment! If you don’t have a computer, you can connect the LAN port of the router to a laptop (netbook) using a wired cable. On the right, it’s easier to configure the router initially (and in some cases, it’s impossible otherwise) to do it over a wired connection. After you specify all the basic parameters (set up a wireless Wi-Fi connection), the cable can be connected to the laptop and then processed via Wi-Fi.

As a rule, there is no power supply to the connections of cables and power supply units. It is important that your device is connected, and the LEDs on your device have started blinking :).

3) How can I configure my router?

Chantly, this is the key nutritional statistics. Most often, it’s easy to hesitate, but sometimes... Let’s look at the whole process in order.

As a matter of fact, each router model has its own address for logging into settings (as well as login and password). Most types of veins, however, have: http://192.168.1.1/ True, but blame. I'll list a few models:

  • Asus - http://192.168.1.1 (Login: admin, Password: admin (or empty field));
  • ZyXEL Keenetic - http://192.168.1.1 (Login: admin, Password: 1234);
  • D-LINK - http://192.168.0.1 (Login: admin, Password: admin);
  • TRENDnet - http://192.168.10.1 (Login: admin, Password: admin).

Important moment! It is impossible to say with 100% accuracy what kind of addresses, passwords and logins your device will have (no matter how I placed the mark). Also, in the documentation for your router, this information is clearly indicated (for everything, on the first or second page of the customer’s instructions).

Rice. 3. Enter your login and password to access the router settings.

For those who were unable to get into the settings of the router, this is a bad situation for a variety of reasons (why this could happen). I recommend speeding up little by little, making it a little lower.

How to enter 192.168.1.1? Why not come, the main reasons -

How to go into setting up a Wi-Fi router (step by step)

4) How to set up an Internet connection in a Wi-Fi router

First, write down these and other adjustments, then make a small wine:

  1. First of all, routers from the same model range may have different firmware (different versions). The type of firmware contains the settings menu, then. those that you will get if you go to the address to set up (192.168.1.1). Also, the firmware should be stored and the language adjusted. In my example, below, I will show the setup of a popular router model - TP-Link TL-WR740N (setup in English, but it’s not so difficult to navigate them. Apparently, it’s even easier to set up in Russian).
  2. The router settings will be subject to the network arrangement with your Internet provider. To configure the router, you will need information from the connection (login, password, IP addresses, connection type, etc.), as a rule, everything that is required is included in the Internet connection agreement.
  3. For the most important reasons, it is impossible to give universal instructions that will suit all situations in life.

Different Internet providers have different types of connections, for example, Megaline, ID-Net, TTK, MTS also use PPPoE connections (I would call it the most popular). Until then, I'll be sure that I'll be smooth.

When you connect PPPoE, you need to know your password and login to access the Internet. In some cases (like, for example, MTS) PPPoE+Static Local is selected: access to the Internet will be granted after entering a password for the login for access; local boundaries will be adjusted in addition to the following requirements: IP addresses, mask, gateway.

Necessary settings (for example, PPPoE, div. small 4):

  1. It is necessary to open the "Network/WAN" section;
  2. WAN Connection Type - indicate the connection type, in case of PPPoE;
  3. PPPoE Connection: Username - enter the login for Internet access (specified in your agreement with the Internet provider);
  4. PPPoE Connection: Password – password (similar);
  5. Secondary Connection - here either nothing is specified (Disabled), or, for example, like MTS - Static IP is specified (subject to the organization of your network). Selecting this setting will affect access to the local network of your Internet provider. If you don’t need it, you don’t have to worry too much;
  6. Connect on Demand – install an Internet connection as needed, for example, when a user opens an Internet browser and searches for a site on the Internet. Before speaking, remember that the column below Max idle Time is the hour after the router (if it is idle) will be connected to the Internet.
  7. Connect Automatically - connect to the Internet automatically. In my opinion, the optimal parameter needs to be selected.
  8. Connect Manually - connect to the Internet manually (not manually...). If some business owners, for example, want traffic that is limited, it is entirely possible that this type will be the most optimal, allowing them to control the traffic limit and not go into minus.

Rice. 4. Setting up PPPoE connection (MTS, TTK etc.)

You can also go to the Advanced tab – you can set DNS there (sometimes this is not necessary).

Rice. 5. Advanced tab on the TP Link router

Another important moment - Many Internet providers bind your MAC address to the edge card and do not allow you to deny access to the Internet if the MAC address has changed ( approx. Each edge card has its own unique MAC address).

Today's routers can easily remove the required MAC address. For whom you need to open the tab Network/MAC Clone press the button Clone MAC Address.

So, as an option, you can tell your new MAC address to your Internet provider and have it unblocked.

Note. MAC addresses are roughly in the following order: 94-0C-6D-4B-99-2F (div. in Fig. 6).

Rice. 6. MAC addresses

Before speech, for example, “ Belline» connection type not PPPoE, A L2TP. The adjustment itself is carried out in a similar manner, except with the following precautions:

  1. Wan Connection Type – connection type needs to be selected L2TP;
  2. Username, Password – enter the data given to you by your Internet provider;
  3. Server IP-address – tp.internet.beeline.ru;
  4. Save settings (the router has to reset).

Rice. 7. Setting up L2TP for Billine.

Note. Well, after you have set up and reinstalled the router (as long as you have done everything correctly and entered the same data as required), you have a laptop (computer) that you have connected via a mesh cable – the Internet may appear! It’s like that - I lost it on the right for malim, fix the drone-free Wi-Fi network. In the future, it will be possible to get rid of it.

5) How to set up a drone-free Wi-Fi network in a router

Setting up a droneless Wi-Fi network usually involves entering the network name and password to access it. As an example, I’ll show you the same router (though I’ll take the Russian firmware to show both the Russian and English versions).

You will first need to open the Wireless section, div. small 8. Next, set the following settings:

  1. The name of the network is the name you will see when searching and connected to the Wi-Fi network (specify whatever);
  2. Region – you can enter “Russia”. Before speaking, many routers do not have such a parameter;
  3. Channel Width, Channel- you can disable Auto and not change anything;
  4. Save installations.

Rice. 8. Setting up Wi-Fi drone-free networking on the TP Link router.

Next you need to open the tab “ Defense of the dartless line“. Most people underestimate this point, and if you don’t protect the measure with a password, then all your neighbors can use it, thereby reducing your measure’s security.

  • Version: can not be changed or disabled automatically;
  • Encryption: just like that, more automatically;
  • PSK password is the password for accessing the Wi-Fi network. I recommend that you say this, that it is important to select the original brute force, or to guess correctly (no 12345678!).

Rice. 9. Encryption-type security (security).

After saving and re-installing the router, the drone-free Wi-Fi network should begin to work. Now you can set up connections on your laptop, phone, and other devices.

6) How to connect a laptop to a drone-free Wi-Fi network

As a rule, if the router is configured correctly, problems with configuration and access to the network in Windows are not to blame. I should be afraid to connect for a couple of minutes, no more.

Start by clicking your mouse on the Wi-Fi icon next to the third party. In the window with a list of known Wi-Fi connections, select yours and enter the password to connect (division small 10).

Rice. 10. Select Wi-Fi to connect a laptop.

If you entered the password correctly before the meeting, connect the laptop and you can start accessing the Internet. Vlasna, the finalization is complete. For those who didn’t succeed, I’ll give a brief overview of typical problems below.

The laptop does not connect to Wi-Fi (does not know drone-free networks, there are no available connections) -

Problems with Wi-Fi in Windows 10: problems without Internet access

The TP-Link company is a great manufacturer of various devices: home wireless routers, Wi-Fi networks, Wi-Fi adapters and much more. In this article we take a detailed look at the process of setting up WiFi on TP-Link, step by step and with screenshots.

Merezheve region TP-Link

For starters, there’s just a few words to say about the TP-Link operator itself. This great company has many successes and is the supplier of modern technology for Internet access. Routers and adapters from these companies are in the homes of wealthy business owners, which is often due to the fact that they are talking about setting up WiFi on TP Link, about how to properly build and achieve maximum Internet productivity on drone-free devices.

Virobnik sells a wide range of equipment: home routers, Wi-Fi boosters, ADSL and 3G modems, Wi-Fi adapters, equipment for smart phones, access points, antennas, etc. For correct operation of these devices, they require proper adjustment.

Connecting a TP-Link home router

In order to set up WiFi on TP Link, we need the following:

  • out of the middle is the router itself;
  • a computer or laptop (a device that can be connected via an additional Ethernet cable);
  • twisted pair;
  • edge cable, through which the provider provides access to the Internet.

Connect the router to the power supply limit, check that the indicators are lit (for those devices that are correctly connected to the power supply limit, the POWER indicator is lit).

Then connect the WAN cable to the connector to enter the apartment (this is necessary in order to have access to the network after setup). The ports on the router look like in the photo below. The connector for the cable from the provider is shown in a different color.

Connect this pair with one end to any LAN connector (yellow color), and the other end to the computer's edge card slot. On the router, the WAN and LAN 1 indicators are lit.

Setting up via WEB interface

After this you need to go to the interface to set up WiFi. To do this, in the address bar of any browser you need to enter the IP address of the router. Zazvichaj tse 192.168.1.1 chi 192.168.0.1. If this is not the correct address, you can find the correct one on the information sticker on the router case.

After that, in the authorization field that appears, you need to enter the admin login and the same password. Again, if the data is not accepted, you need to check the sticker. If any values ​​that are entered are not accepted, it is recommended to reset the router by pressing the Reset button.

So, after this you will go to the router setup interface. Looks like this.

Please note that setting up WiFi on TP Link is more manual because most models have a standardized web interface, an intuitively clear guide for an uninformed user, and the official website provides simulators for all popular models ladnannya.

To set up a drone-free fire rate in the menu, select Wireless, from the submenu that opens - Wireless Settings.

The window will open.

You can set the basic settings for the access point.

  1. In the SSID section, you need to enter the name of your drone-free home range. This can be done using Latin letters and numbers.
  2. You choose the region where you are staying.
  3. In the Channel row, you can deactivate the “Auto” value, so that the router selects the most effective channel for skin re-engaging, or you can select any other one by analyzing the measurements on your phone using other special utilities. If you use Apple devices, you need to select channels in the range 1 to 11.
  4. Complete other settings and click the Save button.

The main installation of the dartless line has been installed.

Setting up a password

Go to the Wireless Security section, there you can set a password for the network. To do this, just check the WPA-PSK/WPA2-PSK box and enter your password. For safety, it is better to use the most complex combinations of small and capital Latin letters and numbers.

The basic setup of the TP Link WR841N WiFi router can now be completed. Confirmed customers can quickly access the official emulator on the manufacturer's website to install customization extensions according to their needs.

Setting up drone-free monitoring on ADSL modems via TP-Link

Many Internet users from providers such as Rostelecom are connected to ADSL technology. Current modems that support this type of connection can distribute wireless data. Let's take a look at how to set up WiFi on the TP Link TD W8961ND.

The remaining wires are connected to an additional telephone cable, and reconnect the connections to the jack on the back panel of the router. This series of connectors differs in shape from the four LAN connectors seen in the same color. The axis looks like this.

Entering the interface is configured in a manner similar to that described in the previous paragraph, but visually the screen becomes clearer.

In the menu, select the Interface Setup section and go to the Wireless tab. What do you need to know about the axis:

Here all settings are located on one screen. We are told the following points:

  1. Turn it over so that there is an Access Point (Activated).
  2. From the list of countries, select Russia and install the required drone-free channel. Other adjustments in this area need to be changed without any restrictions.
  3. Then go down to the bottom of the page and in the SSID row enter the network name, in the Authentification Type field enter WPA/WPA2-PSK, Encryption may be set to TKIP.
  4. Enter the password at your discretion.

As you can see, setting up WiFi on the TP Link W8961ND is quite difficult. Once all the data has been entered, restart the router, find your device in the list of available devices and start browsing the Internet.

Features of customization for Rostelecom

In some regions, TP Link devices are offered by the largest Russian provider, Rostelecom. In addition, modems and routers from this company can be added independently.

The setup of TP Link Wi-Fi routers under Rostelecom practically does not differ in any way from the setup for other providers.

If you are using an ADSL modem, then enter the data in the same way as before. When setting up a drone-free network, you may need to set the connection type on the modem. As a rule, Rostelecom has a PPPoE connection, the login and password for which can be obtained from the technical service.

When connected to GPON or Docsis technologies, the router will be used as an additional device. The connection itself is made through the terminal, or in these cases, the router is connected via an additional cable to the main wiring device.

In order to connect WiFi setup to TP Link for Rostelecom, you need to go to the web interface and enter the required data. Encourage your provider not to put any restrictions on the work of the drone-free line.

Porada: if the configuration was configured by a specialist when connecting the service, it is recommended to change the standard name and password, since devices with data set for installation are most often known to evil.

Adjusting the support of the dartless line

A booster or repeater, Wi-Fi networking is a device that allows you to use drone-free devices over a large area. It is connected in cases where the area of ​​the apartment exceeds the router’s coverage area.

Let's take a look at how the WiFi TP Link booster is set up.

As soon as the device is connected first, the setup is completed, and each device knows which router it will communicate with.

  1. Connect the repeater to the computer using an additional cable.
  2. In the browser, enter the IP address 192.168.0.254, log in using the standard login and password.
  3. Take a look at the Swedish menu. Click on the recommendations on the screen. Once you select a region, a search for dartless lines will begin. Select yours and press “Next”.
  4. Enter the SSID and password for your account, go to the next screen, check the correct settings and complete the work master.

This is what the screen of the fast setup of the TP Link repeater looks like.

Through this web interface, after completing the main settings, you can configure other parameters of the drone-free network, for example, set the encryption type and key for the network.

Repeater connection

After WiFi TP Link is completed, plug the repeater into an electrical outlet in the same place where the signal of the main router decreases, reconnect until the indicator lights up.

Press the WPS button on the head router, and for 30 seconds press the big button with a lock icon on the repeater. An indicator will appear that shows the level of the drone-free range. Two or three times we can talk about those that the Wi-Fi robot will be on a good level.

How to choose a Wi-Fi adapter

It is often necessary to connect via a wireless network to a device that does not have a built-in Wi-Fi module, for example, a desktop computer. In such cases, special adapters are used that allow such installation to receive a signal from a dartless line.

The range of such devices is very large, so depending on the required functionality, you can select an adapter.

If you are using a laptop that does not have a built-in Wi-Fi module or a defective module, you can use a compact adapter, for example, TP-Link TL-WN725N.

In these situations, if you are working on a drone-free basis on a stationary computer located far from the Wi-Fi device, it is better to add an adapter from an external antenna.

You can connect the Wi-FI adapter via a USB connector or PCI (internal).

Pokrokova adjusted

Let's look at how to set up the WIFi TP Link adapter.

  1. First connect it to the computer using the appropriate power socket. If the system unit is on the slide, it is recommended to quickly install a USB cable in order to loosen the adapter for a clearer signal.
  2. You will then need to install the driver. You can request it automatically - then you will immediately download the available Wi-Fi networks, if the operating system does not require it, you can install it from the disk that comes with the adapter or download it from the official website Nick.
  3. If you install the driver yourself, you need to know its version - it is indicated on the packaging or sticker. There are versions V1 and V2.
  4. We install the driver, launch it and follow the instructions on the screen. Just press “Next” several times without changing the same settings, and the driver will be installed, after which you will have access to the drone-free route.

Having adjusted to this instruction, you will be able to connect to the Internet in any part of the apartment that is not hampered by a large number of wires.

As you can see, setting up WiFi on TP Link is not a big problem for users. An intuitively sensible interface, the availability of firmware emulators, and a large amount of available information make this process even easier for the skin.

To ensure that the dartless line worked properly, I have a few recommendations.

  1. If you cannot use the device continuously for a long time, it is recommended that you restart your device at least once every two or three days.
  2. If there are a large number of devices that connect to Wi-Fi, the fastest speed is with a router that supports the operation of boundaries at a frequency of 5 GHz. It is important to remember that many budget or older models of smartphones and tablets may not be able to connect to this frequency.
  3. In rich apartment buildings, the same Wi-Fi channel can be used for a large number of devices. You can analyze the network with special utilities and change the channel in the settings to increase Internet speed through the drone-free network.
  4. Given the advantages of budget models, it is necessary to remember that they can perform clearly and stably, but often maintain the speed below that stated by your provider. Therefore, when purchasing a new router, pay close attention to the characteristics.

Many business owners appreciate that drone-free technologies are significantly compromised by cable connections, but with the right technology and basic rules of operation, even good results can be achieved.

Visnovok

It is already very difficult to see the work on the Internet without the ability to connect drone-less monitoring devices. In this article we looked at the basic setup of WiFi on TP Link. Our recommendations allow you to lose contact and engage in your favorite legal services in Merezhi.

TP-Link is the largest supplier of Wi-Fi routers and a range of other computer equipment. TP-Link TL WR741ND – a widely expanded model of routers for home and office use. Next, we’ll look at how to set up a router to access the Internet with various types of connections, as well as how to set up a Wi-Fi network.

Resetting router settings and connecting to a computer

Now you intend to reconfigure the TP-Link router model TL WR741ND, or most likely reset its settings to factory defaults. To do this, take a small carrying item from your neck (the tip of the ball handle), and then press the Reset button behind it (the small one below), located in the back of the router, and press for a few seconds. The router may be slowing down at this moment.

If you noticed that all the front light bulbs of the device burned out at once, and then went out, this means that the adjustment program has been reset and you can continue.
First set up the modem, connect the cable that is used to access the Internet. It must be connected to the WAN port, which is blue (indicated as Internet). Now let's look at how the setup itself is carried out.
The TP-Link TL WR741ND is a wireless router that can be connected via Wi-Fi. To do this, you just need to turn on the router, then connect to the Wi-Fi network via a computer or other connected device - a smartphone, tablet, or the like. router. You will never need a password.

If you don’t have access to the router for any reason to connect to additional Wi-Fi, you will no longer have to deal with cable connections. For this purpose, one end of the edge cable is connected to any port of the Link TL WR741ND router, which has the same color, and the other end is connected to the edge board of the computer. After which the computer must inform you about the connection to the local network, and on the router the light under the LAN port number blinks, in which cable is connected. However, this is not always the case, so it is better to adjust the connections manually. Through this we enter:



If the exchange is not displayed, and the command line is written to the “Transportation recovery interval” command line, you can try resetting the router settings again, check the correctness of the connection to the new one and re-configure the IP address of the middleware card. Yutera.

The router is connected to an additional web interface


Open your Internet Explorer and enter “192.168.0.1” in the address bar. A small dialog will appear in the browser window, requiring you to enter your username and password. Both the one and the other for the duties – admin. Enter them and press “OK”.

TP-Link TL WR741ND supports a variety of Internet connection types

Before you set up your devices, you need to understand how the technology for connecting to the global network is monitored by your Internet provider. Below we will look at the most reliable dating options, one of which will definitely suit your situation.

Go to the Network section on the left side of the modem interface, then on the WAN. Contact us WAN Connection Type. Adjustment to that other type of connection will begin again.

Static IP

Technology is being abused even more often. Here you only need to check with your provider for 5 different IP addresses (shown below). Enter them in the provided field and click Save – setup is completed.

PPPoE/Russia PPPoE

The technology transmits the correct login and password to log in. If you know the data, enter it in the following fields: User Name (login), Password (password) and Confirm Password (confirmation).

PPPoE technology is often used against static IP. If your provider shows these addresses to its clients, they also need to be entered. To do this, in the Secondary Connection section, transfer the remixer to Static IP and enter the IP address given by the provider and the submersion mask.

Click Save.

L2TP/Russia L2TP

The type of connection requires entering the server address, login and password, as well as (not always) additional security addresses that are provided by the provider individually to each client.

Enter the data first in the User Name and Password fields. Then in Server IP Address/Name enter the server address (also seen by the host). This can be seen as the primary IP address or, for example, “adres.provaydera.ru”. If your provider has seen additional boundary addresses, include the Static IP item and fill in the fields as in the Static IP section.

Press Save.

PPTP/Russia PPTP

Another type of connection that often overlaps. Here, to connect to the provider, a VPN connection is used. The settings are the same as for the L2TP/Russia L2TP configuration described in the previous paragraph. You will only have to call your provider to clarify the type of connection that is being tested.

Installing Wi-Fi on the TP-Link TL WR741ND is simple:


All other points can be deleted as e.

Click Save. TP-Link TL WR741ND is ready to go! It became impossible to verify the connection.

This instruction will show you how to set up a TP-Link router. The TP-Link Wi-Fi router is available in several modifications and for writing this article we used the example router version TP-Link WR841 N. However, these instructions are entirely suitable for the latest models: TP-Link TL-WR740N and TP-Link TL - WR741N. Do not close the page if you have a TP-Link WiFi router of another modification. If you don’t have any significant duties, then read the article and repeat all the steps according to the instructions.

If there is no need to connect a TP-Link router, then the scheme is standard: Connect the router to the power supply, insert the cable from the Internet provider into the WAN port, and connect the fringe cable from the computer into the LAN socket.


You can read the report about the secret rules for installing and connecting a router, no matter what model. So, as long as there is no fault in connecting the power, we can immediately proceed to setting up the TP-Link router.

Setting up the TP-Link router

Before that, how to install the TP-Link router, bazhano vikonati skidannya nayavnih install. It's easy to hesitate. Each router has a special button for resetting the Reset router settings. Press this button and hold it for about 30 seconds, after which the router must re-enable and reset the settings.

Now you can start setting up the router. For this you need to go to the router’s web interface. For this purpose, open any browser and enter 192.168.0.1 in the address bar. If we were unable to leave, we try to enter 192.168.1.1.

Note: the addresses for entering the router interface may vary depending on the firmware installed on the device. For the first time, the input is available through 192.168.0.1, and after updating the firmware through 192.168.1.1.

After going to the specified address, you will be presented with a window where you will need to enter your login and password. For TP-Link routers, the login “admin” and a similar password are required. If you don’t have to follow the password and login details, check the router’s documentation, it will certainly contain all the necessary information. Also, information for logging into the web interface is located on the sticker on the bottom side of the Wi-Fi router.


Now, after entering your login and password, you can click “send” and put it into the web interface of the Wi-Fi router, here we will complete all the necessary settings. First of all, we need to update the TP-Link firmware to the latest version. First of all, you need to check the firmware version of your router. It will be indicated on the gateway of the router.


Our vikorist version has “Ver: 7.2”, so we need to download it ourselves. You may have a different hardware version, but the essence does not change. We go to the site http:// www.tp-linkru.com and search the site and enter the model of our Wi-Fi router, as was said earlier, our instructions are based on the TP-Link WR841 N router. You enter your search model and press to know. Select a suitable model from the list. Next, look for the “Customer” tab and go to it. Now we need the “Software Software” section, where we need to select the “Incorporated software” item. Here we look for the hardware version of your device and check the firmware from the list. We unzip the firmware file onto the computer and navigate to the setup menu of the wifi router.

Now we need to install the remaining version of the firmware, which we have been so fond of. To do this, go to the System Tools section and select the Firmware Upgrade item. Now we press “Look” and go to the firmware file, after which we press “Upgrade”. Then the router will automatically update the firmware, and you will be directed to the main page of the web interface.


Now you can proceed to the basic parameters of the TP-Link router. It’s important to change your login and password to log into the router setup. To do this, you need to open the “System Tools” section, select the “Password” item and enter the required data, then click the “Save” button so that all settings are set.


How to set up the Internet on a TP-Link router

The forgery has been resolved. Now it is necessary to adjust the boundary. To do this, look at the “Network” section in the main menu of the interface, then select the “WAN” item, where we need to select the type of network. The type of connection depends on the services of which Internet provider you use. You can find out about the necessary information from the agreement with the provider or on the official website of the provider of services.


After selecting the connection type, go to the MAC Clone tab, select the Clone MAC Address item and click the Save button.


How to set up Wi-Fi connection on TP - Link

In principle, the Internet must appear even after the completion of fortune-telling operations, it is recommended that the Wi-Fi network be configured. For this purpose, the Wireless section and in the Wireless Network Name field enter the name of your Wi-Fi network.


Let’s save the settings and move on to the “Wireless Security” section. Here we need to configure the security parameters of our Wi-Fi network in order to come up with a password. In principle, you don’t have to change anything, but you can still connect to your Wi-Fi network no matter what, or better yet, set a password. For this purpose, enter the appropriate password in the PSK Password field.



If you did everything correctly, you won’t have to worry about everyday problems with Internet access. Now you know how to set up a TP-Link router if you have lost some power supply, put them in the comments or section “set power supply for the staff”.

Connecting a TP-Link router is clearly and step by step outlined in the instructions that are included with the router upon purchase. Once the documents have been received, prepare a router, adapter, WAN cable or device capable of receiving the Wi-Fi signal. Find out which electrical outlet and internet cord allow you to connect the router and follow the instructions below to see how you can easily connect a TP-Link Wi-Fi router in a fraction of the cost.

For which TP-Link models are these instructions available?

Please note that there is great diversity in the model range of routers. The process of connecting cables for most of them is similar, but the adjustment will vary, since each model has its own firmware version and features of the design and ergonomics of the admin panel. Such information will be provided in a separate article.

These instructions are exactly right for the following models:

  • TL-WR940N,
  • TL-WR941N,
  • TL-WR740N,
  • TL-WR841N
  • TL-WR840N,
  • TL-WR842ND,
  • TL-WA701ND,
  • TL-WR743ND

For all models of TP-Link Wi-Fi routers, connections will work the same or very similar way.

The router version TL-MR3220 will be used as a suitable device. Unfortunately, there is currently no more popular and wider TL-WR841N, but everything ends in the same way.

How to connect the computer to the cable?

First of all, after purchasing, pay for the food router. For this purpose, an adapter is connected to the socket called POWER. It’s impossible to have mercy on this guy. The other end must be plugged into a socket. On some models there is a life button. It is necessary to press it in this case, since the light bulbs on the box did not immediately burn out. Another task is to connect the router to the computer. For which the hedging cable is used. One is included in the basic configuration. This is finally inserted into the edge card of your computer, and a friend's share in the LAN socket of the router. Tp-Link routers have 2 plugs installed. The stench has a characteristic yellowish color. Vikoristovat can be done with roses. The number of devices means how many devices can be connected to this router. This could be a TV, a set-top box, or anything else that connects to an additional cable. Merezha Wi-Fi can also be purchased via Wi-Fi. You may need instructions on connecting your laptop to Wi-Fi.

How to connect TP-Link to the Internet?

The main function of the router is to distribute Internet connections. To use this function, you must first connect the cable to your provider or ADSL modem. Connecting The cable goes into the Internet provider's WAN socket. This rose on the box is in a single copy. It appears as a blue color.

If the Internet is supplied via an ADSL modem, the cable to the modem is connected to the WAN connector. The basic version also has the same.

The manipulations shown look like this.

If all the entries are correct, a connection icon will appear on your computer. For everything, you will not have access to restrictions or restrictions. You need to set up your router. Recommended reading. Most models are adjusted the same way, so you can use the TP-LINK TL-WR940N stock. If the provider blocks the dynamic type of IP address distribution, then the Internet can be requested without any preliminary setup. Similarly, if you have an ADSL modem installed. Once all the data has already been entered, distribution to the Internet will proceed automatically.

As you have described the larger situation, you will have to change a number of parameters. You will need to set up a Wi-Fi network and set a password for your new wireless connection. Quite often, when setting up a router, various problems arise. There are a lot of connections with the Internet. Therefore, you should familiarize yourself with the article “Without access to the Internet” or “Interrupted”, it has the necessary methods and methods for solving problems.

Application © 2022 Mobile and computer gadgets