How to copy the circuit certificate to another computer. How can I copy an electronic signature from the register on my nose? Creating a backup copy of the CryptoPro CSP private key

If a floppy disk or flash drive is used, the copy can be downloaded using Windows (this method is suitable for versions of CryptoPro CSP no lower than 3.0). The folder containing the private key (including the certificate file) must be placed in the root of the floppy disk (flash drive). It is recommended not to change the folder name during copying.

The folder with the private key has 6 files with extensions.key. As a rule, a private key also has a private key (the header.key file in this case is larger than 1 KB). In which case, copying the secret key is not necessary. The example of the private key is a folder with six files and the private key is a file with the extension .cer.

Private key Private key

Copy for additional help CryptoPro CSP

Select "Start" > "Current Panel" > "CryptoPro CSP". Go to the “Service” tab and click on the “Copy” button.

In the “Copy private key container” window, click the “Look” button .

Select the container you want to copy and click on the “Ok” button, then “Next”. If you are copying from a root token, an entry window will appear in which you will need to enter your pin code. If you have not changed the pin code on the nose, the standard pin code is 12345678.

Consider entering the name manually for the new container. The name of the container may have Russian layout and clearings. Then click “Done”.

In the “Insert a clean key nose” window, select the nose on which the new container will be placed.

The new container will be prompted to set a password. It is recommended to set a password so that you can easily remember it, so that third parties cannot guess or pick it up. If you do not want to set a password, you can leave the field blank and click “OK”.

Do not save your password/pin code in places where third parties may have access. Once you lose your password/pin code, the container will become impossible to use.

If you copy the container to the ruToken smart card, the information will sound different. In the input window, enter your PIN code. If you have not changed the pin code on your nose, the standard pin code is 12345678.

After copying the system, go to the CryptoPro CSP Service tab. Copying completed.

If the electronic signature was issued before the PC registry, you can copy it to your device following the instructions.

Procedure 1. Open cryptopro and go to the “Service” tab, then click on the “Copy” button as shown in the instructions.

Step 2. At the window, press the “Look” button in order to select the electronic signature container required for copying.

Step 3. From the list of existing containers, select the container you need that you want to copy onto your nose and click the “OK” button.

Step 4. Confirm by pressing the “Next” button in the window that appears.

Step 5. In the window, enter the name of the new container that will be created on the nose. The name in the field is entered automatically, so you can simply not change it. Click the "Done" button.

Step 6. The wear selection window will appear. Select from the list of required persons for whom you need to copy the electronic signature. In order to understand which nose to choose from the list, look at the “Nose Insertion” field: it will say “Nose on the Day”, which means you have selected the wrong nose, and the name of the nose will appear, similar to I'm on the screenshot. Select and press the “OK” button.

Lesson 7. Once you have collected the item, you will be prompted to enter a PIN code for a new electronic signature container. It is recommended to enter the standard PIN code “12345678”, because Clients often forget or use their PIN codes, after which the electronic signature has to be re-issued. You can set your (other) PIN code if you remember so you don’t waste it. After entering the PIN code, press the “OK” button.

Ready. Now the electronic signature container has been copied to your selected device, and you can use it.

Since there is no need to understand these details, we will help you. You can call our engineer to your office.

This article was created for EDS users who recognize the difficulties in transferring keys from 3.5A floppy disks to other reliable devices.

The article also describes the process of installing new certificates. This operation should be started in the immediate order: Points 1-3 (replacement “ Copy"vibrati" Install“) And then continue from point 15.

• You can get two certificates up to date.
• Once copied, the files may also be encrypted on disk.

It’s a miracle in itself, but not in all bad situations.

So that there are no difficulties in the program's design CryptoProCSP USB-carriers, the main cost-free utility for maintaining costs CryptoPROі Rutoken in the current state. This verification can be launched from the website: http://help.kontur.ru (you must go for help Internet Explorer browser). On this side, you will need to exit the previous preparation (start and install a small program) and then click “ Print diagnostics«.

This record will be installed in this manner. To change the registry, you must open the registry editor. After confirming the login to the system, the registration editor will open. On the left half of the window, click on the approaching path. It looks like it is shown on the next screenshot. However, creating this record is not enough; you still need to assign the value 1.

Tools in the command line

The values ​​can be easily changed by clicking on the entry. The changes came into effect after the restart. Low security: on an unsecured computer, cloud data and keys may be copied. With the help of a cryptographic map, the stinks could not be copied, although the stinks were exploited illegally. Possibility of duplication: you lose the security and uniqueness of the identification document. Capacity: hundreds or thousands of certificates and passwords can be stored on the smallest device. Dublyuvannya: the sub-warrior can be a shift, so as not to endure it too much.

Authentication with additional password

Authentication of cloud data without a password. Authentication for water supply devices Certificates for residents of Catalonia.

• Advantages.
• If this is not the case, enter your password as before.
• Although this is not a secure site, it is also a vikorist blog.

If you have not completed the process of obtaining a certificate, the time has come.

All components will be checked:

Vibrati " Fix identified problems"In the coming window, select any programs that require updating.

Transfer of certificate and keys of EDS from Disk 3.5A toUSBflash (This operation works for the keys SED, Continent AP, Supply Circuit, Purchases)

What does the certificate export and what is needed?

Exporting a certificate consists of a copy of the certificate. As a result, we have a file that can help us. It is important to save it in the safest place, in the best care of our computer. To transfer our certificate to another browser, we can perform the operation Import certificate, which we explain in another entry. To be safe, please take a copy of our certificate. . Please note: it is important that our copy be under our control, and not unnecessarily copy our certificate.

We will prepare your new set of keys within a few minutes. Trust yourself by creating a password to access cryptographic keys. This is an extremely important document that you are not guilty of missing: the certificate of purchase is not a simple file. Once you have a key pair and a encryption certificate, it's time to realize that you can recover and strengthen encrypted electronic documents. The best way to do this is to register your private key on a private server where other clients can find it - a server that is useful for people with special needs before information is lost.

Next, you need to carefully follow the instructions, and then remember that a copy can only be made through SKZI (using cryptographic protection of information), otherwise, for example, If you copy through Explorer, you will not be able to run the key on another computer.

Instructions for copying a certificate via CryptoPro CSP

1. Click on the shortcut CryptoPro CSP 3.0 or open it through Start – Control Panel.

Sending the private key to the key server is a good way to reveal what you are doing with encrypted mail. There is nothing wrong with this, because this resource is not a key server, but rather a database to store information from multiple servers. If you still want to change the recognition item, you can do so by clicking on the menu that opens and selecting another option from the list.

Establishing an electronic signature to the Register

You can also publish your private key on a powerhouse website or blog. To do this, go to the keys window, make sure the “Show all keys in stock” option is checked, and then see your email if you show up. Then right-click on it and select the option “Copy private keys to clipboard.”

2. In the system window, go to the “Owning” tab and select the reader by selecting from the list of reader settings, then select “Add”. Check out “All Important Discs” and “Register”, as they are not on the list.

4. At the next window, run the “Look” command in order to enter the name in the empty field. When you select a name, confirm the operation, then click the “Next” button. In some situations, when working with a root token, you may need to enter a password (PIN code) - enter the sequence 12345678.

5. Create a container name where the data is copied. The keyboard layout can be Russian or Latin. Clearances are also allowed under the name. After entering the name, click “Done”.

6. Then the system will ask you to insert a clean key into the container that will be copied. Click “OK” to get started.

7. You can set a password on the copy that is being created - this is a non-binding step, you can simply click “OK”, leaving the field blank. If the copy is sent to a rutoken, you will again need to enter the standard security combination - 12345678.

The copying process will be completed when the system returns to the Service tab on the screen.

To copy a key container:

What you need every day:

Important! To complete the creation of the key data, reinstall the certificate from the copied container:

• Open the "Start" menu - "Control Panel" - "CryptoPro CSP" - "Tools" - "View certificates in the container."
• Click "Look", select the required container, click "Ok" and "Next".
• Click "Install".
• When requesting a replacement certificate, please give a firm confirmation.
• Click “Done” and “Ok”.

Now the certificate of binding is installed to the container in which it was installed.

Video instructions for making a copy of the key container.

taxcom.ru

How to copy EDS to a flash drive

Copying the digital digital signature from Rutoken or other media to a USB flash drive may be necessary to ensure the safety of the signature, for the reliability of the search, or to transfer a copy of the authorization to a person.

Copying the digital digital signature from a stolen device is carried out using the CryptoPRO CSP program (current version 3.9).

We need:

Copying the digital digital signature from Rutoken to a flash drive

1. We insert a USB flash drive into the computer immediately.

2. Launch the CryptoPRO CSP program. (All pictures are in the clickable instructions)

3. Open the Service tab

4. Press the Copy button...

5. At the window, press the Look button...

6. In the window, select our certificate (EDS key)

9. Enter the name of the new copy of the digital digital signature, for example – myetsp(copy)

10. Pressure Done

11. Select our flash drive from the window

12. Pressing Ok

13. Enter a new password for the copy, for example this is 12345678 in the wrong row

14. Press OK

After which it will close, and a folder with a name similar to myetspoc.000 will appear on the flash drive - this is a copy of our digital signature. Now this file can be copied to a wide range of media or, if necessary, sent via email.

Be careful and respectful, an electronic digital signature is the same as your handwritten signature!

You can set up a work place for work with the EDS on trading platforms without any costs automatically. Report on completion: automatic adjustment of the EDS

good-tender.ru

How to copy certificates from the CryptoPro program

My new post will be dedicated to the Crypto Pro program, after all, there is nothing complicated, but there have been problems with this software all the time, and then to the one who stumbles with it once or twice at the river of such software, but we decided to create a reminder for ourselves and for you.

Manager: Give access to the Kontur Extern program on two machines, let’s get started OK.

What we can do: One already working key on the SD card.

What you need: We need a portable SD card, a USB flash drive, you can also add it to the registry, or you can use it to create RUtoken titles. I will install it on RUtoken, and you can use any of the options.

So, just a small note, if you have a domain computer, then it’s best to work under the admin account.

And so let's get started,

We know the program in the start menu or the browser panel,

We launch the program.

Go to the Service tab and click on the Copy button.

Next, press the Browse button and select the key we need for copying in the Description format. We choose him and push him further.

You must enter a password of 8 characters. We type the password and press Further.

In the coming week, we need to set the name of the container (I will manually select the name of the name-01 and 02 for the entire hour, and I will also be able to select the IPN of the organization.) For this purpose, press the Finish button.

Here you will once again be asked to enter the password before the new container, but it will be the same and press OK.

At the next dialog box, you need to select the host where to copy our container, I select RUtoken, and you need to select the host where you are going to install the container.

The axis is in full view, the key is copied. It became impossible to install it for a specific koristuvach.

There are two options here:

Option 1.

Go to CryptoPro again, open the service tab and click on the button View certificates in the container.

In the dialog box, open the container we need and press the OK button. then press the Next button.

At the next window, press the Install button, if there is none, then press the Power button.

In the window, click the Install certificate button. The Certificate Import Wizard will open and you will need to click Next.

In the window you need to delete everything like this and press Next.

Once the certificate has been installed successfully, you must open the dialog box.

Option 2.

Set up through the menu and install a special certificate.

To install the certificate, we need the certificate file itself, (a file with extensions.cer) that can be found on the site where we copied it in my rutokin folder.

And then open CryptoPro again, go to the Service tab and click the Install a special certificate button.

You can find this certificate by clicking the Look button.

In the next dialog box, check the box opposite Find container automatically, after which the program will automatically find the required container. Then click the Next button.

You will then be prompted to choose where to save the certificate, you will need to select Personal and click OK.

Then a dialog box will appear where you need to click the OK button.

Then you will receive a notification about the successful installation.

After that, you need to pull the device onto the container with the keys and insert it back, after which the device is found, you can try it.

If you have any food for the fact that in different versions of CryptoPro there may be different changes, then ask, please leave your comments, I will be happy to help you in the future.

nn-lab.ru

How to copy a certificate from CryptoPro CSP - Programs and programs

Program and program

Sometimes situations arise when you need to install a certificate from a key on another computer or create a backup copy of it. When working with USB flash drives, you can create a working copy of the private key using Windows, especially with CryptoCSP 3.0 installed.

Next, you need to carefully follow the instructions, and then remember that a copy can only be made through SKZI (a method of cryptographic protection of information), in other cases, for example, If you copy through Explorer, you will not be able to run the key on another computer.

Instructions for copying a certificate via CryptoPro CSP

1. Click on the shortcut CryptoPro CSP 3.0 or open it via Start – Control Panel.

2. In the system window, go to the “Owning” tab and select the reader by selecting from the list of reader settings, then select “Add”. Check out “All Important Discs” and “Register”, as they are not on the list.

4. At the next window, run the “Look” command in order to enter the name in the empty field. When you select a name, confirm the operation, then click the “Next” button. In some situations, when working with a root token, you may need to enter a password (PIN code) - enter the sequence 12345678.

5. Create a container name where the data is copied. The keyboard layout can be Russian or Latin. Clearances are also allowed under the name. After entering the name, click “Done”.

6. Then the system will ask you to insert a clean key into the container that will be copied. Click “OK” to get started.

7. You can set a password on the copy that is being created - this is a non-binding step, you can simply click “OK”, leaving the field blank. If the copy is sent to a rutoken, you will again need to enter the standard security combination - 12345678.

The copying process will be completed when the system returns to the Service tab on the screen.

tdblog.ru

How can I copy a private key container from CryptoPro?

Copying the private key container is an obligatory task when reinstalling NBIS on another computer. You can also copy the certificate if you want to create a spare key for the electronic signature.

Copying a private key container to a flash drive, floppy disk or token is a simple process, so it is important to carefully follow our instructions to ensure that the keys are lost.

CryptoPro: certificate copying

Croc 1. Opening CryptoPro programs

To open the program, go through the following steps:

Click the Start menu, then go to Programs ⇒ CryptoPro ⇒ CryptoPro CSP and click the Tools tab.

In the open Service window, click the Copy container button.

Croc 2. Copying the private key container

After clicking the Copy Container button, the system will display the Copy Private Key Container window.

In the open window, you need to fill in the Key Container Name field.

Croc 3. Introduction of the key container

There are 3 ways to fill in the Name field of the key container:

Manual entry

Select from the list for help by pressing the Look button

Search for EDS certificate

After filling out the Name field of the key container, you must fill in the search options:

• The entered name indicates the key container - the remixer is installed in the position of the Computer or Computer, depending on which container is being moved;

• Select CSP to search for key containers – the required crypto provider (CSP) is selected from the registered list.

After filling in all fields, click the Next button.

If a password is set for access to the private key, the system will ask you to enter it. Enter the password and click OK.

Term 4. Introduction of a new key container

The system will again display the Copy private key container window, in which you need to enter the name of the new key container and install a jumper.

Click on images to enlarge

After entering, click Done.

Croc 5. Select the nose for the copied container

A window will appear on the screen where you need to select a destination for the copied container.

Often people who use digital signatures for their needs need to copy the CryptoPro certificate to a flash drive. In this lesson we will look at different options for following this procedure.

In general, the procedure for copying a certificate to a USB drive can be organized in two groups of ways: using internal operating system tools and using additional functions of CryptoPro CSP programs. Below we will take a closer look at the options.

Method 1: CryptoPro CSP

First of all, let's look at the method of copying the additional CryptoPro CSP add-on. All these steps will be described using the Windows 7 operating system, but in general the algorithm can be adapted for other operating systems of the Windows family.

The main reason for copying a container with a key is the need to ensure that when created on the CryptoPro website, the goods are marked as exports. Otherwise, you won’t be able to earn money.

1. Before starting the manipulation, connect the flash drive to the computer and go to "Control panel" system.



2. Open the section "System and security".



3. Find the item in the designated directory "CryptoPro CSP" and click on the new one.



4. A small screen will appear at the end where you will need to move to the section "Service".



5. Then press the button "Copy...".



6. The container will be copied at the end, you will need to click on the button "Look...".



7. The container selection window appears. See the name of the one you want to copy, the certificate for which you want to copy onto a USB drive, then press "OK".



8. Then the authentication window will appear in the field "Enter password" You need to enter the key virus with which the selected container is password-protected. After completing the specified field, press "OK".



9. After this, you will be rotated to the main window for copying the private key container. Please note that in the name field of the key container up to the output name you will automatically receive the following: "-Copy". Ale for the fruit, you can change the name to something else, even if it’s not obligatory. Then click on the button "Ready".



10. Then you will be able to select a new key. From the list presented, select a disk from the list that matches the required flash drive. After whom to emboss "OK".



11. At the authentication window, you need to enter the same password for both containers. They may either be the same as the key virus of the output, or they may be completely new. This one has no boundaries. After entering, press "OK".



12. After which information will appear at the end with notifications that the container with the key has been successfully copied to the selected device, then in this case to the flash drive.

Method 2: Koshti Windows

You can also transfer the CryptoPro certificate to a flash drive using the Windows operating system by simply copying it via "Explorer". This method will only work if the header.key file contains a valid certificate. In this case, as a rule, your size should be no less than 1 KB.

As before, the descriptions will be given for applications in the Windows 7 operating system, and will also apply to other operating systems in this line.

At first glance, transferring the CryptoPro certificate to a flash drive using other operating system tools is much simpler and more intuitive, however, through the CryptoPro CSP. Please note that this method is only suitable for copying a private certificate. In the case of a prophylactic episode, you will have to quickly complete the program.