The program changes the voltage of the processor. The best programs for overclocking an intel processor (i3, i5, i7). Rozgin without programs
Rozgin of the central processor - Primus-like increase in clock frequency. Increased clock frequency, in turn, increases processor productivity. In this way, you can get a loan for the purchase of a new processor. Please understand that it is impossible to outwit the laws of physics! The increase in power results in an increase in energy consumption, wear on the processor and an increase in thermal efficiency.
What kind of entry needs to be carried out before dispersal?
The processor is subject to its own clock frequency shift, which brings it to the point of efficiency in operation. Speaking about Intel processors, the popular Core i3, i5, i7 series, they can be configured for a maximum of 15 watts. K-series processors are the most angry, especially those with an unlocked multiplier.
In addition, you should know that once the temperature threshold has passed, the processor begins to skip cycles, which reduces productivity. This means that you will have to check and, if necessary, paint the refrigeration system and possibly replace the cooling unit. It would be better to pay off all expenses later, perhaps it would be better to replace the processor.
Before overclocking, you must check:
- BIOS version, which may be new;
- reliability of the cooling system;
- Availability of software for overclocking;
- protest the processor robot, for example, for the additional S&M utility ( entice).
Programs for overclocking Intel processors
SetFSB - download
The main advantage of the program lies in the fact that the firing can be done “on the fly”, moving the steps. After changing the clock frequency, there is no need to restart the computer. Additional utilities can be used on both old and new processor models.
The program does not support all motherboards; you can find out which models are supported on the program’s official website. It’s clear that if you don’t respect yourself with a stuck-in kistuvach, just forget about it.
After launching the program in the Clock Generator menu, you must select the clocker model installed on your motherboard. Then click the Get FSB button, and the current frequency of the system bus (FSB) and processor will be displayed in the window. Carefully re-press the window in as small increments as possible, checking the temperature of the processor. Having selected the optimal clock frequency, you can press the Set FSB key.
SetFSB has little or no advantage in that settings are saved until the computer is rebooted. The processor will have to be removed immediately after Windows starts.
CPUFSB - download
Best of all, this program overclocks processors. Intel Core i5, i7. It works with a lot of motherboards, it is a Russian version, and the interface is as simple as possible.
From the main menu you need to select the motherboard manufacturer and chipset model. The next step is to press the “Take frequency” button, after which the current clock frequency of the processor will appear. The clock frequency moves in small increments, but you need to be careful when working. As before, the startup is saved until the system is rebooted.
SoftFSB- enchant without cost
Another handy program for increasing the clock frequency “on line”. It also supports a larger number of external motherboards. However, it’s costless to replace the two front programs. The main disadvantage of the utility is that it will no longer be supported, and it will probably not be used with a new deposit.
In the FSB select menu, you must specify the model of the clock generator board. Next, press the GET FSB button to save the clock frequency. The frequency also increases with the help of additional steps.
All the programs are listed in a simple manner. Of course, the installed computers disable the processor in the BIOS, but for this important knowledge, it is necessary to restart the computer immediately after making changes. All three programs allow you to mount Intel processors on any computer, even if you have a laptop, be careful and not raise the frequency to the limit values.
Today we’ll talk about overclocking Intel processors and take a closer look at a program that will help you do it in the easiest way. Well, first of all, we understand that such overclocking (in English overclocking) of the processor is always required and the results of overclocking will be discussed further. People who engage in overclocking are called overlockers.
Intellectually, all overlockers are divided into three categories
- The first type is tse cobs and economical overlockers. By saving money, stinkers are able to deprive themselves of maximum productivity by spending a small sum of pennies. A folding computer is made from low-cost components, which may have become outdated. Those who can spend pennies buy with zagale. Naturally, the productivity of such a computer system is far from being comparable. Therefore, owners of such technology are starting to overclock the processor in order to slightly improve the speed of their PC.
- The other type is called the overlocker. Their method is to achieve maximum productivity and satisfaction with the acceleration process itself, without losing any money. Even at the stage of purchasing inexpensive equipment, proven overlockers are encouraged to select them with an option for a further upgrade. Be careful when choosing the right one for your computer. Like the motherboard, it is due to the wide capabilities of supporting various components, such as the processor, then it is obligatory because of its inherent overclocking capabilities. As a result, such systems often, after overclocking, have at least the same speed as top-end computers that operate in normal mode. But most of the time, there is no need for such productivity, and the overlocker simply needs to be satisfied with a beautifully crafted job.
- The third type of overclockers is extreme overclockers. For them, the method of acceleration is the maximum possible productivity by any means and regardless of price. The stench is constantly present in older models, the most demanding components, and those exposed to extremely low temperatures. It is difficult for them to end up with a system with parameters that are inaccessible to most PCs.
Of course, such a category is smart and there are no clear differences between overlockers. Eggs tend to move from a group of knowledge, knowledge of their duties and opportunities to become extreme sportsmen. Well, no matter what, everyone is wondering where they started, and if anyone is serious, theoretical preparation will be carried out. We will now take a little bit of the theory of overclocking the processor.
Collecting information about the system
First of all, start before overclocking the processor, it is necessary to notice why you are on the right. Right now you need to start improving your system. Identify all storage components, check the system for the motherboard, check the information and diagnostic utilities, conduct performance tests, indicating the maximum and minimum temperatures at different temperatures of the system. . After overclocking the processor, you can equalize the data extraction from data displayed on the system when the processor frequency increases. In addition, with the help of preliminary tests, you can verify that the system operates stably at the rated frequency and voltage.
Necessary programs
Both before and during overclocking, you will need special programs and utilities. Again, they can be divided into many categories: programs for diagnostics, monitoring, overclocking, checking the stability of the robot system and utilities for improving productivity.
In real life, there are clear boundaries between these categories. With the help of diagnostic programs, you can measure productivity, and utilities designed for monitoring can also turn on the processor. It’s just that the skin program has the main directives for which one is optimally suited and a number of additional non-core functions.
The diagnostic and information security software is designed before the configuration of your system. The most powerful and functional of them are Lavalys Everest and SiSoftware Sandra.
However, these packets are not interconnected unless determined by the system configuration. These software complexes are designed to monitor, monitor productivity and test the stability of computer work. However, the use of such programs for all purposes is not always true, especially since they are expanding for a fee, and only a fraction of the possibilities are available in cost-free packages. Such cumbersome programs can be replaced with less familiar, but no less effective utilities. For example, the CPU-Z utility, which provides information about both the processor, the motherboard and RAM, is extremely popular among overlockers. To carry out detailed control and manage memory timings, you can use the small MemSet program.
To ignite the processor, the best option is to use the BIOS. Unfortunately, computer developers will not be able to provide such functionality forever. This situation can be resolved quickly using the universal SetFSB utility, which we will discuss later. Also, first of all, be aware of the CD that comes with the motherboard. Often, software developers come with software packages with drivers that may overclock the Windows processor.
Let us first remember one important truth: any processor overclocking program cannot give you a 100% guarantee. There is no chance to move forward as soon as you are ready to overclock, monitor and test a number of different utilities. You can check the stability of the system using the OCCT or S&M utilities.
Hundreds of special programs have been written to improve system productivity. Such utilities are useful for testing either the system as a whole or its components separately. An example of a simple but functional program is NovaBench.
Basics of overclocking processors
Overclocking is the name given to the Primus robot processor at frequencies that exceed the nominal frequency. The reasons behind the fire may vary. This could be due to the manufacturer placing a large amount of value into the processor architecture or other marketing moves. It’s not so important, it’s a little smut – it’s just a matter of victoriousness given the power.
Regardless of the great variety of computer components on a PC, everything is standardized throughout the world. This necessitates the need to synchronize components from different transmitters. The output point is the system bus frequency – FSB. When the buses on the motherboard (channels) differ, which connect different components of the board, the transmission frequency is lower, lower than the FSB. Therefore, dealers are victorious for setting their nominal frequencies. If today's processors operate at a significantly higher frequency, then in order to be able to operate at their nominal frequency, the multipliers will be stagnated.
Let's point the butt. The Intel Core 2 Duo E6300 processor operates at a bus frequency higher than 266 MHz. This multiplier is older than x7. An additional FSB frequency for this multiplier will give the processor frequency 1.86 GHz. Also, in order to overclock the processor, you need to increase the FSB frequency or multiplier.
Older models of modern processors are characterized by strong multipliers. However, similar processors have high performance, which can be an order of magnitude higher than that of younger processors of the family. Therefore, adding such processors is not entirely rational, but with additional overclocking it is possible to achieve the productivity of younger processors equal to the productivity of their older counterparts.
Therefore, the acceleration of any processor depends on an increase in the FSB frequency. If we take into account the acceleration of the Intel core 2 duo processor, then with an increase in the bus frequency to 400 MHz, the processor frequency can be increased to 2.8 GHz. If we increase the FSB to a value of 500, then the processor frequency becomes 3.5 GHz. These facts are the main ones and knowing them already, you can go straight to the BIOS and start increasing the FSB frequency, thereby speeding up your processor. However, before starting the cob, you need to carry out some preparatory work, as we will look at below.
Preparatory stage
Before you start overclocking the processor, you will have to earn a couple of hard skills. First of all, you should go to the website of the manufacturer of your motherboard and check that the latest BIOS version is not available there. Apparently there are a lot of problems when, not long ago, the system boards found a different life after updating the BIOS. In addition, the updated version may not only correct any bugs found, but also introduce new parameters and capabilities into the board’s BIOS. You can find out which BIOS version you are running at the moment the motherboard starts. If the information appears for only a short period of time and you do not have time to read it, then press the Pause key on your keyboard. The BIOS version can also be updated for additional information and diagnostic utilities. Of course, not all versions have a new BIOS version that is better suited for overclocking than the old one, but the new version would like to remove the bugs from earlier versions.
Nuances of overclocking Intel Core processors
A characteristic feature of all processors that have a Core microarchitecture is high productivity. Since stench miraculously can be dispersed, we give it special respect.
Core processors, in addition to a great number of advantages, also have a number of disadvantages that still complicate the overclocking process. Such processors have their own uniqueness - that’s what the FSB Wall is called. This concept describes the maximum bus clock speed that the processor can run. By changing the multiplier to x6, you can find out at what maximum bus frequency your instance can run.
To be clear, a processor with a nominal bus frequency of 200 MHz practically never reaches a frequency that exceeds 400 MHz FSB. Choose this factor by choosing a Core series processor. Instead, pay for an older-line processor because it is much cheaper and easier to overclock a younger processor. In this case, it is necessary to remember that younger CPUs have a nominal x8 multiplier that is faster for all exchanges through the FSB Wall, and therefore the frequency after overclocking cannot go higher than 3.2 GHz. Therefore, so as not to hinder yourself in the maximum possible frequency, when purchasing, pay attention to the processors that run the x9 multiplier.
Processors that operate at a nominal bus frequency of 266 or 333 MHz are also selected younger and have a x7 multiplier. Besides the heavy-duty FSB Wall, the launch may be based on the capabilities of the motherboard and RAM. Such processors can also be selected with a multiplier of x8 and more. However, here there is a new danger for overlockers - FSB Strap.
FSB Strap is a parameter that characterizes not the processor itself, but the chipset and motherboard. This is the frequency of alternation of chipset robot modes. For example, after overclocking the processor, the productivity of systems based on the Gigabyte motherboard and Intel P965 Express chipset immediately drops. And the motherboard axis from the Asus manufacturer, based on this chipset, shows high productivity at 400 MHz. When testing the Asus Striker Extreme motherboard with the NVIDIA nForce 680i SLI chipset, performance dropped as the clock went from FSB 420 MHz to 425 MHz.
Rostering the processor using the additional SetFSB program
Now, if the theoretical part is correct, we can begin to accelerate the Intel processor. As an example, the SetFSB program is very popular and effective.
After launching the utility, a similar window may appear on the screen.
On the cob itself, you select the PLL chip. You can see what kind of installations you have visually on the motherboard, or with the help of special utilities. You may find that your chip itself does not appear in the list, so you will have to look for other utilities that support your chip type. As a last resort, you can contact the author of this utility and ask for the chip you need to be added to the program. However, this procedure will take a lot of time and it is not a fact that the seller will respond to your request.
After you have selected your chip, click the Get FSB button.
The window displays different frequency values, including the frequency at which processor is currently working. The current frequency is selected in the Current CPU Frequency window. The frequency is 1198.2 MHz.
Speed up the processors, raising the system bus frequency. To increase the named frequency, you need to move the button located in the center of the window, right-handed. Tabs and steps, as there are instructions to avoid unforeseen problems, or better yet, avoid them. If you want to increase the frequency control range, check the box next to Ultra, as shown in the front panel.
Now the right-handed one is slightly re-skinned. As a result, the frequency may increase by 10-15 MHz.
Once you have made the changes you have entered, you must press the SetFSB button.
If the computer freezes after pressing the SetFSB button, or if it freezes, don’t worry. This simply means that you either entered the wrong PLL, or you greatly adjusted the frequency. After resetting everything will return to normal and you can make changes. If you have done everything correctly, then the processor clock frequency will increase. I marvel at the shorter little ones.
To switch to a stable computer after overclocking, you will have to use an additional utility. We've added our choice to Preime95.
After launching the utility, press the Just Stress Testing button, as shown below. The following may appear on the screen of your PC:
Select the third item and press OK. After this May, testing of your system will begin.
In one hour, using the Preime95 utility, you can run the HWMonitor utility, which controls the temperature of your processor, as well as other components, while undergoing the test.
The Prime95 program can generate data that is highly dependent on the computer processor. The testing will be successful if the processor runs for at least fifteen hours stably and does not freeze. After successfully completing the test, you can try increasing the processor frequency further and restarting the system test.
If you want to interrupt the test early, you can use the additional menu, as shown in the little picture below.
By increasing the frequency and significantly changing the stability of the system with the help of Prime95, you can reach the maximum processor frequency, if you work steadily for a long period of time at maximum pressure. After all manipulations with overclocking and determining the optimal frequency, you need to add the SetFSB program before auto-start. Otherwise, all your changes will be applied after the first reboot of the PC.
First of all, you create a bat script. Why do you need a standard standard Notepad, in which you need to make something like this:
c:\Program Files (x86)\SetFSB 2.2.129.95\setfsb.exe -w15 -s668 -cg
c:\Program Files (x86)\SetFSB 2.2.129.95\setfsb.exe is your route to the SetFSB utility on your computer. Naturally, some corticosteroids may experience irritation.
w15 – with this parameter you set the necessary delay before running SetFSB. An hour is expressed in seconds.
s668 – a record that indicates the adjustment of overclocking. This parameter is very important. For the baby in our form, the number is 668 (the first number is right-handed from the side that is in the green field)
cg)