Highscreen boost 2 se official firmware. Installing custom firmware for additional recovery help
Highscreen Boost 2- This is a Russian smartphone that runs on Android 4.1 and has a rating of 5 out of 5 in terms of productivity. We know all the characteristics of the smartphone, as well as how to unroot it on Highscreen and get reset. In addition, there is firmware (official and custom).
Root Highscreen Boost 2
Yak otrimati root for Highscreen Boost 2 see instructions below.
Below are universal programs for removing root rights for devices on Qualcomm Snapdragon
- (PC required)
- (Ruth for help PC)
- (Popular)
- (Root in one click)
If the rights of the super user (root) could not be removed or the program did not appear (you can install it yourself) - set the power in the topic. You may need to flash custom kernel firmware.
Characteristics
- Standard: GSM 900/1800/1900, 3G
- Type: smartphone
- Operating system: Android 4.1
- Case type: classic
- Body material: plastic
- Number of SIM cards: 2
- SIM card robot mode: alternating
- Vaga: 151 g
- Dimensions (WxHxT): 68.6x140x9.8 mm
- Screen type: color IPS, touch
- Touch screen type: multi-touch, multi-touch
- Diagonal: 5 inches.
- Image size: 720x1280
- Pixels per inch (PPI): 294
- Automatic screen rotation: є
- Type of melodies: polyphonic, MP3 melodies
- Vibrate: є
- Camera: 8 million pixels, built-in
- Camera functions: autofocus
- Video recording: yes
- Front camera: є, 2 million pixels.
- Audio: MP3, AAC, WAV, FM radio
- Voice recorder: є
- Headphone jack: 3.5 mm
- Interface: USB, Wi-Fi, Bluetooth 3.0
- Satellite navigation: GPS
- Internet access: WAP, GPRS, EDGE, email POP / SMTP, HTML
- Modem: є
- Processor: Qualcomm MSM8225Q, 1200 MHz
- Number of processor cores: 4
- Video processor: Adreno 203
- Memory capacity: 4 GB
- RAM capacity: 1 GB
- Memory card support: microSD (TransFlash), up to 32 GB
- Additional functions of SMS: entering text and dictionary
- MMS: є
- Battery type: Li-Ion
- Battery capacity: 3000 mAg
- Sensors: brightness, proximity
- Search the book: yes
- Exchange between SIM card and internal memory:
- Organizer: alarm clock, calculator, planner
- Contents: two replaceable batteries (3000 and 6000 mAg)
»
Firmware for Highscreen Boost 2
Official firmware Android 4.1 [stock ROM file] -
Custom Highscreen firmware -
The HighScreen Boost 2 firmware can be modified in a number of ways. If you don’t have the firmware file yet, then create a topic on the forum, in a section, the fachivs will help you and add the firmware. Don’t forget to write a 4-10 row video about your smartphone in the topic, but be careful. The official Highscreen website, unfortunately, will not help solve this problem, and for us it is absolutely harmless. This model runs onboard the Qualcomm MSM8225Q, 1200 MHz, and there are obviously the following flashing methods:
- Recovery - flashing directly on the device
- A special utility from the printer, or
What are custom firmware?
- CM - CyanogenMod
- LineageOS
- Paranoid Android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK (MoKee)
- FlymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and shortcomings of the smartphone with Highscreen and how to fix them?
- If Boost 2 does not turn on, for example, leave a white screen, hang on the screen saver, or the notification indicator only blinks (possibly after charging).
- Freezes when updated / freezes when turned on (reflashing required, 100%)
- It’s impossible to charge the phone (shout out, problems with charging)
- Don't drain your SIM card
- The camera does not work (in most cases, hardware problems)
- The sensor does not work (be aware of the situation)
Hard Reset for Highscreen Boost 2
Instructions on how to perform Hard Reset on Highscreen Boost 2 (discounted setup). We invite you to familiarize yourself with the basic server, as it is called on Android. . 
Codes for setting up discounts (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Quit the device - go to Recovery
- "Wipe data/factory reset"
- “Yes - delete all user data” -\u003e “Reboot System”
How to log into Recovery?
- squeeze and release Vol (-) [thickness down], or Vol (+) [thickness up] and the Power button
- A menu with the Android logo will appear. That's it, V is in Recovery!
Skidannya nashtuvan on Highscreen Boost 2 You can do it in a very simple way:
- Settings-\u003e Updates and discounts
- Skidannya nalashtuvan (at the very bottom)
How to remove the pattern key
How to reset your pattern because you forgot it and now you can’t unlock your Highscreen smartphone. On the Boost 2 model, the key or PIN code can be obtained using remote methods. You can remove the blocking through a downloaded setup, the blocking code will be received and disabled.
- Skidannya Count. blocking -
- Password reset -
Download firmware for Highscreen Boost 2 SE
| date | OS version | Name | Posilannya |
| 13-09-2017 | Android 7.1 | Lineage OS 14.1 | |
| 13-09-2017 | Android 7.0 | zNougat | |
| 13-09-2017 | Android 7.1 | Phoenix Rom | |
| 29-07-2015 | Android 4.4 | 20141202_V2.9IIse | |
| 29-07-2015 | Android 5.1 | MIUI v5 | |
| 29-07-2015 | Android 5.0.2 | CyanogenMod 11 |
It is necessary to remember that if you still decided to update Android and reflash Highscreen Boost 2 SE, then you are living at your own risk. While you can still download and downgrade the old firmware with the desktop versions, after installing an alternative version you may not be able to download it.
| Additional information on Highscreen Boost 2 SE . Root rights are removed . Pos_bnik koristuvach . Attach photo and video . Cody, engineers . Tests (productivity, battery, crash) . LineageOS . Yak zrobiti Hard Reset . Instructions for disassembly . Get a pattern key . UnRoot |
Few problems
It is based on the words of real koristuvachs. This gadget has few problems, and it stinks: it gets hot, glitches, hums. Sometimes the Highscreen Boost 2 SE has blinking buttons, does not turn on after flashing the firmware, does not charge or operate the camera, sensor or GPS module. So the speaker itself may wheeze or the smart phone won’t load the memory card. It turns out that the Play market add-on provides information about those with insufficient memory. You can also tell us how to increase the volume of the speaker and turn on 3G on HighScreen Boost 2. However, don’t worry about such a great list of shortcomings of this smartphone. These are separate incidents, just gathered in one place;)Firmware Highscreen Boost 2 SE
frame productivity
| chipset | Qualcomm Snapdragon 400 MSM8228 |
| configuration | 4x 1.6 GHz ARM Cortex-A53 |
| frequency | 1400 MHz |
| cores | 4 |
| Bit | 64 |
| graphics | Adreno 306 |
| cores | 24 |
| frequency | 400 MHz |
| Antutu v6 | 22.373 |
| GeekBench | 1232 |
| 3D Mark Ice Storm Unlim. | 4774 |
Instructions for updating the Highscreen Boost 2 smartphone to new official or custom firmware, installing custom recovery and removing the root rights of the super user.
Before you start updating your phone, you need to install drivers to connect your PC with your Highscreen Boost 2 phone. To do this, download the ADB archive, unzip it and install it.
Connect your phone to your computer. To set up your phone, you have to turn on the USB connection, whichever way you turned it on, turn it on. Click on the “My computer / This computer” icon with the right mouse button, and select “Power” in the context menu. At the window, left-handed, search for “Device Manager” - open it.
In the "Device Manager" window, you can see the list of device connections, under "YunOS ACB phone" click on the new one 2 times to display the list, then "YunOS ACB Interface". You have an installation driver.
If your device is a hot mess, it means you do not have the driver installed.
The folder contains the drivers (behind C: / adb /) with the Shift button pressed, press the right mouse button on the empty space. In the context menu, select "Open command window". The command line opens, writing adb devices
List of devices attached
............................device
Replace the dots with symbols.
Installing custom recovery on Highscreen Boost 2
We choose which recovery is suitable for the Highscreen Boost 2 smartphone
The file itself is in .img format, for example recovery.img. After downloading the file, put it in the folder C: / adb /
Vimikamo phone. We tighten the battery for 10-15 seconds (not too tightly, but sometimes it is necessary), and insert it back. Press the button to change the volume and turn on the device and wait for 5 seconds. show up eternal wrote Highscreen (fastboot mode). We connect the phone via a wire to the computer.
In folder C: / adb / with the Shift button pressed, press the right mouse button on an empty space. In the context menu, select "Open command window" and in the window, write fastboot devices and then:
Then we write fastboot flash recovery recovery.img and press enter, then we write fastboot boot recovery.img and press enter, after which the process of flashing custom recovery on the smartphone will start.
Ready! The phone itself will be locked into recovery!
Installing custom firmware for additional recovery help
The installation of the firmware will take place through the TeamWin Recovery Project custom recovery, and it is respectful that you installed this recovery according to the previous paragraph of these instructions.
To begin with, download the similar firmware and throw it onto a flash drive in your phone
Download Highscreen Boost 2 firmware - MIUI 4.8.8 RUS | cm-11 | Baidu_V6
We go into recovery, on the switched off phone we press the high volume key and the power button on the phone.
Robimo Backup (Obov'yazkovo!), Press the "Backup" button, move the bottom slider to the right and check it. Check out for a long time...until the green letter shows up successful. During the recovery process, the screen may go dark and the phone may become locked.
Then we clean your smartphone of unnecessary system files so that we can wipe. We go to the main recovery screen and press the “wipe” button, destroy the slider again and check again.
Let's install the firmware. Go to the recovery menu and press the Install button. We know I downloaded the firmware, it’s ticking. I destroy the slider again and start jam again) After the process is completed, the message sucsesful and 2 buttons restart system and wipe dalvik will appear.
Does the functionality of the additional Android smartphone Highscreen Boost 2 SE fail? Do you want to root your Danish smartphone? The website for Root Highscreen Boost 2 SE will help you!
What is Root?
For those who are only new to the great world of Android and not particularly familiar with the concepts of - Root Android, And there is also a need for something that can be done after revoking Root rights, or as soon as they are left behind as they will no longer be needed, all this can be identified from the report -!
In front of us!
This article has no “leftist” messages or unnecessary actions! If you really need Root Rights, then read carefully and follow the steps, step by step, to guarantee that you will do everything correctly! This article on the removal of Root rights is divided into two parts: The first part is Necessary components and washings, Another part is tse Instructions How to remove root rights from files and programs. If in the process of removing root rights Android is gradually re-enchanted or in the process of permanent enchantment (rarely gets lost, but still), then warto. Now let's get started with Root rights!
Android developers sometimes release new firmware, so you won’t be able to remove Root using one of the established methods, as there are also alternative methods, try them. Still not going out? Indicate the Android version and firmware version in the comments (don’t write nasty shitty comments that you won’t put on yourself or anyone else). Android is stuck (not enchanted), read and re-read from the very FIRST PARAGRAPH, all the necessary messages have been sent in the present article!
Run out of food?
Are you running out of power and can’t get out of rooting your Android? Forget comments about things that either worked out or didn’t work out for you, or you did it differently.Necessary for removing Root rights
For Method No. 1
- Computer or laptop (OS Windows XP / Vista / 7/8 / 8.1);
- Charge the Highscreen Boost 2 SE smartphone by at least 30%;
- Enable USB connectivity;
- Access the archives with a program to remove Root rights and unzip them.
For Method No. 2
- Computer or laptop (OS Windows XP / Vista / 7/8 / 8.1);
- Unusual MicroUSB cable;
- Download and install the driver;
- charge smartphone Highscreen Boost 2 SE is guilty of becoming not less than 30%;
- Enable USB connectivity on smartphones;
- Create a program to remove Root rights - Vroot.
Instructions for unlocking Root Highscreen Boost 2 SE
method No. 1
1. Connect the Highscreen Boost 2 SE smartphone to the computer in charging mode 
2. Run the program to remove Root via the file rootboot.bat
3. In the program interface, press the button “ 1
»I to continue your selection« Enter« 
4. Do not turn on your smartphone until you are completely re-engaged and completely re-engaged!
5. After turning on the Highscreen Boost 2 SE smartphone, add administrator root rights - SuperSU
6. Root Highscreen Boost 2 SE unlocks!
method No. 2
1. Connect your Root Highscreen Boost 2 SE smartphone to your PC
2. Run the program to remove Root rights Vroot
3. Click the pokey program to find your smartphone Root Highscreen Boost 2 SE
4. Press the green “Root” button
7. After a couple of hvilins Root rights are revoked
8. Add an addendum root In the drain window, press the right button 
Check whether Root rights are true
This Rootgadget article is published How to flash Highscreen Boost II SE smooth and safe. We have written reporting instructions for you.
Why update the firmware on Android?
The reasons for everything are different, most importantly, in the new firmware the driver corrects bugs and shortcomings.
- There is a problem with the accuracy of pictures when a carbon chamber is evident.
- The display is rotten when pressed.
- I would like to marvel at the new Android Pie 9.0.
- I've gotten used to the old version of Android and want new features and capabilities.
- The phone doesn't want to turn on.
- The phone battery has stopped charging.
- From now on, you need to upgrade the firmware by selecting one of the options below. Along with it in the archive is the necessary set of programs (TWRP and others).
- Then unzip the archives and find the file “instructions_rootgadget.txt”. Unpacking the archive can be done using any archiver (7ZIP, WinRar and others).
- The firmware zip file in the archive must be downloaded to a memory card or to the smartphone’s memory.
- For more information and sequence of actions, see the text instructions.
Firmware Highscreen Boost II SE
- Android Pie 9.0 - you can say it's a flagship OS, but it's still a little underdeveloped. URL: upfileget.info/android9pie
- 8.0 Oreo is a premium version, with a minimum of bugs and rich functionality, and version 9 is much simpler. URL: upfileget.info/android8oreo
- 7.0 Nougat - a stable version in all conditions, works well on low-pressure crops. URL: upfileget.info/android7nougat
- 6.0 Marshmallow - versions 5 and 6 - this is already a real motloch, although it will be the pinnacle of progress. If you switch to them from 3 or 4 versions, then the difference will be noticeable. URL: upfileget.info/android6
- 5.0 Lollipop URL: upfileget.info/android9pie
Root rights
If you want to revoke root access, you can quickly use the universal program Rookthp Pro 2.4, website addresses: rootkhp.pro. You can find the instructions for this program on wiki. And also with universal ones we can please ZYKUroot version 2.2. You can find information about him at zykuroot.info
We won’t talk about more popular programs, the same Kingo and Framaroot are always heard, even if they give up their positions a little