A look at special programs for other posters. Yak A3 is distributed on two arkushes A4. A look at special programs for other posters How to move from a3 to a4 word
As a rule, the MS Word document is set to A4 page format, which is completely logical. This format itself is most often used in business, and in this format a large number of documents, abstracts, scientific and other works are created and distributed. However, there is a need to change the standard adopted to a greater or lesser extent.
MS Word has the ability to change the page format, and you can do this either manually or using a ready-made template by selecting one from a set. The problem is that it is not so easy to know the section in which the settings can be changed. To clarify everything, it’s easier to understand how Word can create an A3 format instead of an A4 format. Well, it will be possible to set any other format (size) for the page.
1. Open the text document whose format you need to change.
2. Go to the tab "Layout" then open the group dialog box "Side page settings". To do this, press on the small arrow, which is located in the lower right corner of the group.
Note: In Word 2007-2010, the tools needed to change the page format are located in the tab "Layout of the page" in the section " Additional parameters".
3. In the window, go to the tab "Paper size", where we separated "Paper size" Select the required format from the menu that appears.
4. Press "OK" to close the window "Side page settings".
5. The page format will change to your choice. Our view is A3, and the side in the screenshot is shown at 50% scale to accommodate the size of the program window itself, otherwise it simply won’t fit.
Manually changing the page format
For some versions of side formats, only A4 format, unavailable, accepted, documents in the system will not have a printer connected. However, the size of the page, which corresponds to one or another format, can always be set manually. Everything that is required for this purpose, without knowing the exact value according to GOST. It remains easy to recognize the problem with sound systems, but we hope to forgive you the problem.
Also, page formats and their exact dimensions in centimeters (width x height):
A0- 84.1 x118.9
A1- 59.4 x84.1
A2- 42x59.4
A3- 29.7 x42
A4- 21x29.7
A5- 14.8 x21
And now about those, how and where to indicate them in Word:
1. Open the dialog window "Side page settings" at the deposit "Layout"(or divided "Additional parameters" at the deposit "Layout of the page", since you are vikoristing an old version of the program).
2. Go to the tab "Paper size".
3. Enter the required values for the width and height of the side in the field, then click the button "OK".
4. The page format will change according to the parameters you specified. So, in our screenshot you can view an A5 sheet at a scale of 100% (to suit the size of the program window).
Before speaking, you can set any other values for the width and height of the side, changing its size. Other nutrition, which will be great with the printer that you know in the future, as you are planning to work.
That's all, now you know how to change the side format in a Microsoft Word document to A3 or any other standard (GOST) or additional one, tasks manually.
It may be that splitting A3 into two arches A4 is foldable and only for professionals. There are also a number of ways that can help solve this problem. With their help, it is possible to separate one baby into two arches of standard sizes to guide the student.
What to talk about:
How to complete the process in Word and PDF
To split A3 into two A4s in Word, follow these steps:
- Open the Word document and go to the other menu. Then select the A3 paper format.
- Select items: number of sides on the arch – 1 per side size.
- Press onto A4 format.
The document will be printed on two A4 racks.
We open the word document, go to each other and select the A3 paper format
It is possible to split A3 into two A4 PDFs using Adobe Reader, Evince or others, which allows you to view the document format. To do this, you will need to create a scale that will divide the images into two sides. Then select "Druk".
Click on the menu - 1 side on the arch -> Beyond the size of the side -> A4
For additional spreadsheet help
This method is available to data processors who often process documents using Excel. To begin with, you need to create a clean table in the program. Then add to it the picture you need for each other.
The next step will be to move to the “Vyglyad” section. In “Rozmita storinka” it is necessary to stretch the image so that it goes beyond the margins and is divided into two parts. In this manner two sides are established. For clarity, select the scale that is at the bottom, and change it.
For additional help: PlaCard, Easy Poster Printer, Posteriza
The PlaCard program was created in order to split large images on 2-3 sides. How do you get it? The program is different, dividing 1 image into a number of fragments of a standard arch (two or more). Using additional programs, you can select your choice, change and edit the picture.
With the help of the Easy Poster Printer software, you can split the A3 format into two A4s in a short hour. To achieve the best effect, the brightness control, small scale, and line markings are completely adjustable.
The cost-free software Posteriza allows you to change the number of fragments in an image. You need to work by selecting the required data for your friend from the Size deposit.
AutoCAD is an easy and quick method
Any printer can be used with AutoCAD. The order of robot attacks:
- Using invisible frames, divide the A3 sheet into two parts.
- Increase the width of the resulting frames by 1 cm. This is necessary to glue the halves of the two images together.
- Check the scale so that you can see the same in two images.
- Select the “Druk” option. Place one half of the picture in the first place, and then another.
Druk on A4 sheet at Kompasi
A compass is a simple way to depict a hand of A3 size on two arches. To start working, you need to go to the “Forward View”, select the “Service” option and open the image. Having turned the little ones, get the required scale. Next, in the same menu, set horizontally and vertically the amount of sides that is higher than 1. Another prepared document on standard arches.
Having studied these methods, it becomes clear how to split an A3 image onto a standard A4 sheet. With these data, you will forget about the problem and will be able to resolve it on your own.
Author Sanita placing food at the section Other languages and technologies
How can I set the Word format to A3? and having taken away the best part of the story
Confirmation from Vovan[guru]
Place the other one and enter the data manually 29.7 x 42 cm
Confirmation 2 types[guru]
Vitannya! Here's a list of topics to answer your question: How to put A3 format in a word?
Confirmation Natalya[guru]
There, the file in the page parameters finally has the paper size. I have A3 there
Confirmation Access de Nied[guru]
The problem is in the Word itself - the dog is oriented towards the connected printer. Install a new printer in Windows, or just a wide-format one - go for A3, I won’t call it that right off the bat, otherwise you can check the list. And then work as a printer for production. Word will immediately have an option for your friend on A3 also...
Confirmation Poizon[expert]
You can install Word 2007 (there is A3), you can set the page parameters - paper size - (in centimeters) size of the drop-down list - "other" or "values according to your needs"
Confirmation Ksyusha Lavrova[Newbie]
By hand
Confirmation Ordynec[Newbie]
Everything is madder outside. I did this: file-drug-power of the printer-richness-poster 2 on 1 and everything came out. The sheets will then need to be cut along the line. knife and glue). Beaver everyone))
Confirmation Slawik[active]
Just set the printer to any other printer in A4 format and automatically add everything to the page settings.
The standard format for Microsoft Word is A4, which corresponds to a standard office archival paper, but what should you do if you need to carry out the work and read the result in A3 format?
There is nothing complicated, it is enough to make a few changes when adjusting the working document.
Please note that when choosing the A3 format, you need to know whether your printer can be used in this format. If, unfortunately, such functionality is not available to you, then the choice will be difficult.
You can display A3 format in two ways. The first one is worried about setting up the Word program itself, the other is changing the settings with your friend.
Let's take a look at the first method:
1. To change the document format from A4 to A3, you need to go to the tab “Site layout” - “Size” - “Other sizes”.
2. For other sizes, you need to go to the “Paper Size” tab and indicate the different dimensions, and “Width – 29.7 cm”, “Double – 42 cm”. These dimensions correspond to an arch, which is in A3 format.
3. After completing the operation, it is necessary to save the changes and you can continue the work in a document that is the size of an A3 box.
Another method: changing the page format by adjusting the settings:
1. To open the document’s directory settings, go to the “File” tab and click “Director”. You can also use a combination of keys to open options with Ctrl+P.
2. In the window that has opened, click the “Options” button - “Additional” - this will open the menu of additional parameters for the other document, where you can directly select the format of the document itself - A3. This is what we need most.
Sometimes it seems that the problem of dividing A3 into two A4 formats is very difficult and cannot be solved without professional help. But really, there are ways that can easily help you pick out one big baby on two arches of standard sizes.
Special programs for each other
It is clear that sometimes you just need to unzip the A3 format on a primary A4 printer in order to change the image scale and place it on a standard copy paper sleeve. To do this, you just need to go to the other menu and select A3 format. After that, click on the option One side on the frame, select By side size and put a tick on A4. Anything that is no longer earned - start a friend.
Now let’s talk about the methods that can help separate A3 on two A4 arches:
- Program PlaCard. This software is specially developed in order to create posters of large sizes on several A4 pages. The program has the function of dividing one large image into two more fragments, the size of which corresponds to A4 arches. PlaCard allows you to create selections, edit and change graphic formats. Using it, you can easily capture either a picture from the Internet or a scanner.
- Program Easy Poster Printer. By downloading it to your computer, you can split A3 into 2 A4s for a few bucks. In this way, you can easily control the intensity of the division, scale the image, adjust the marking lines, and perform any other manipulations with the image in order to achieve the desired effect.
- Program Posteriza. This cost-free program allows you to change the number of baby fragments in a special “Size” tab. With this help you can quickly separate any little A3 into two or more standard arches.
The easiest way to work in AutoCAD
This method does not require additional software and is easy to get stuck in anyway printer:
- Arkush A3 is divided into two parts by invisible frames (view screens).
- We expand the two frames by cutting 1 cm of skin and moving them in such a way that the overlap is perfect for gluing the two halves of the image.
- In the “Friend” section, in A4 sheet format, I write half of the picture first, and then to a friend.
- It is necessary to check the scale - it may be the same for two halves. Before speaking, if the frames are the same, the scale will automatically be equal.
How to help a friend Excel
This method is suitable for developers who work with electronic spreadsheets. Excel. If you want to get out of this, the simplest way to remove the skin may not be.
- First, create a blank Excel document and add a new image that needs to be wrapped on two A4 sheets.
- Go to the “View” section and click on “Side Layout”.
- We stretch the little ones in such a way that they are held by the markers and are divided into two sides.
- To make it easier to work and stitch between the edges of the image, you can change the scale using an additional option in the lower corner of the page.
- In the “Druk” section, you select the book format of the arches and set the size of the fields.
- We check the images before each other for the additional function of looking ahead in order to avoid confusion.
All improved methods allow you to independently export an A3 image onto two or more standard frames. You can try any of them and find out which is best for you.