How to independently update the Tricolor security program? What's the matter? Tricolor TB - update of Priymach software Priymach tricolor TV gs 8306 after update

GS 8306 appeared in 2012, becoming one of the most compact devices of Tricolor TV. The model allows you to watch a package of high-definition TV channels "Maximum HD".

External look

The digital display is out of date, which shortened the power consumption of the device. The life-jet removed from the body lowered the heating temperature of the device, which, according to the comments of the koristuvachs, increased the term of its service. Failure of the life unit is the main cause of breakdowns of satellite tuners, and now, if necessary, it can be easily replaced with another one.

The “Tricolor” GS 8306 tuner is manufactured in a small silver metal case. The side parts of the upper cover are rounded, which visually changes the height of the bowl and gives it a modern appearance. The top, chassis and rear panel are made of metal, and the front panel is made of plastic. There are rotating ventilation openings at the top and bottom. The front panel gets by with a minimum. On it there is a button for switching the robot mode, channels and volume adjustment.

The operating mode indicator is indicated by the Standby button. This white-black color, behind the koristuvachs’ horns, is badly marked on the front panel. On the side of the case there is a slot for a smart access card.

Rear panel:

• input and output LNB IN and LNB OUT;
• RCA output for composite video signal;
• RCA outputs of the right and left sound channels;
• USB port;
• HDMI port;
• rose for dzherel zhizlivnya 12 tbsp.

Filling

The Neotion NP6+ central processor is suitable for budget MPEG 4 devices in standard SD and high definition (HD) and supports advanced secure data exchange technology. The microcircuit does not require an additional heatsink, and its heating does not exceed 45 °C. The receiver's motherboard contains two 512 MB DDR2 RAM sticks. ROM – based on flash memory with a capacity of 16 MB. Data exchange speed up to 35 Mb/s is supported. EEprom memory chip 24C08RP with a volume of 8 KB, which is used to save important system parameters. The primary path of the presented receiver has a DVB-S/S2 tuner unit Serit SP2230 MVb. The Montage Technology M88TS2022 tuner microcircuit is installed at the input part of the block. Alarm demodulator on Montage Technology M88DS3103 chip.

Additional instructions for the tuner block:

• loop HF output;
• mode of automatic selection of communication parameters;
• functions of a blind search

Controller for the HDMI interface on the Analog Device ADV7520 chip, which supports the HDTV video format with an integrated HDCP encryption module. The card acceptor places on the side of the board and runs directly to the additional plastic.

The life of the LNB is controlled by the Allegro A8293 regulator, which generates up to 8 levels of voltage with a tone of 22 kHz and controls the constant voltage.

The regulator is connected to the I2C bus. On the board there is a place for connecting an SD card slot and the front panel display, reserved for newer receiver models. The power supply is based on an additional adapter with a constant voltage of 12 V and a voltage of 2 A. There is also a 2 A supply on the board.

Contents of delivery

The GS 8306 has the same remote control as in other Tricolor TV satellite tuners. According to the owners, it is light and handy, due to the fact that the control buttons are located in the center. Є buttons for information and other functions of the provider: TV Mail, TV Chat, Freeze movie. “Input Signal” is used to remix the signal between HDMI and CVBS interfaces. Live remote control 2

The kit also includes a brochure “Tricolor TV” and an instruction manual.

Connection

To assign the GS 8306 robot mode, a backlight is used, which consists of 2 LEDs. The indicator mode is determined by the sequence of their activation. These modes are:

• Svetlo vidsutne — darkening tuner. However, the receiver has a default sleep mode, in which the day is indicated. You can log in and out using the Standby button.
• Without interruption - the device will be activated after quitting or exiting the draft mode. If the GS 8306 tuner does not switch on and the indicator is on, then, most likely, it is in the mode of activation.
• Indicator flashing – draft mode. Switching from one view to another is achieved by pressing the button for switching channels on the front panel.
• The bottom part of the indicator lights up - operating mode, the HDMI signal is being supplied.
• The upper part of the indicator lights up - operating mode, the signal goes to the CVBS connector.
• Continuously sending a signal to the HDMI interface and CVBS connector is impossible. Before the first time of reception, the video signal goes to the RCA/CVBS connector behind the 576i standard.

The audio signal goes to the RCA outputs independently of the interface.

Resetting the settings of the GS 8306 receiver does not affect the video output mode. Every day there is a separate channel on the HDMI output - only 1080i is supplied. This can be used to connect the local tuner to TVs that operate in 720p mode.

If the connected devices install a separate image automatically, a situation may occur if the installed image is not compressed by an external device. Tricolor TB receivers are re-enabled, and the HDMI interface becomes disabled.

tension has been relieved

Operating the power supply at 12 volts:

• sleep mode - 100 mA;
• Standby mode - 450 mA;
• review with standard separate housing - 650 mA;
• High clarity viewing – 750 mA.

In sleep mode, the loop output is turned on. GS 8306 updates are available via the USB tuner interface.

First crumbs

At the hour of the first activation of the receiver or at the hour of uninstallation, the “First Installation Wizard” starts. Setting up is simple and consists of the following steps:

1. Install your menu from three possible ones (English, Ukrainian, Russian).

2. Set the region in the list to attract a companion. If you select “Main”, you will find channels that broadcast throughout the entire “Tricolor TB” zone. Select another region before adding channels.

3. Search TV and radio channels “Tricolor TV”. This mode starts after selecting a region. At the hour of adjustment, adjustment indicators (rubicity and brightness) and a search progress indicator are displayed on the screen. The rest is a little less worrying, then you can switch to the creation mode.

4. You can re-set up the additional function “Search for Tricolor TV channels” from the main setup menu. Search for other modes every day. There is no need for adjusted antenna parameters. Receiver GS 8306 for use with the standard “Tricolor TB” subscription package and a submenu every day.

Customize menu

Allows you to install:

• Basic and additional movie audio and subtitles.
• Date synchronization mode - automatic by satellite and manual.
• Image format (no changes, Letter Box, PanScan, Combined).
• Analog video parameters (PAL standard is adopted). The brightness of the image, judging by the words, is good. Switching to SECAM mode increases brightness and causes loss of contrast.
• 4-digit PIN code for access. As the customers have noticed, it is possible to reset the setup menu to set the code without any problems, so you can reset the settings and PIN code to the factory settings.

Pereglyad

The maximum number of TV and radio channels that can be stored in the device’s memory does not exceed 1000. Their expansion increases depending on the initial scan of the “Tricolor TV” package. Numbering starts from zero. You can choose how to display the list (in 1 or 3 columns), sort by alphabet or in reverse order. Daily function for editing the list. I don’t look back at him with any concern. The channel cannot be moved, deleted, renamed, blocked with a PIN code, or added to one of 5 lists, which may include TV and radio channels. You can select your favorite channels using additional filters. You can also edit and change the position in the list.

The tuner switches to the sleep mode until information about the rest of the view is lost. When you turn on the Tricolor TB receiver again, switch to the mode of creating the “zero” number of the remaining selected list.

Broadcasts of "Tricolor TV" are encoded by the DRE Crypt smart access system. A subscriber purchasing a GS 8306 receiver removes a smart card from the 14-digit DRE ID. The prepayment rate can be viewed in the “Subscriptions” menu. Mixing takes 3 days for SD and 4 days for HD mode. You can go through the list that clicks on the screen, or through it. It is possible to quickly switch sides of the list.

Service functions

The firmware of the GS 8306 receiver supports such functions.

• The program schedule for the day, including data about the genre of the program and their descriptions. EPG will be very attractive. The TV Guide window displays data about the transmission of 8 selected channels. The timer starts to re-watch programs.
• Teletext.
• Subtitle.
• Alternative sound recordings.
• Cinema. The window displays the list of available films, the hour before the start of viewing, the genre, and a description of announcements and films. The My Sessions service allows you to create your own program schedule. TB mail. The service displays notifications on the screen and attaches images sent from the TB Posta Tricolor website.
• TB chat. The service allows you to display text notifications from your mobile phone. Messages are displayed in the window in the creation mode.
• Banners that are displayed during the hour of mixing between channels. Advertise the products and services of the provider or other companies.

Firmware change

To update the tuner software, USB port, and USB port, you need to follow these steps:

• You need to write the file you want to download to the root folder of the USB storage device;
• insert the accumulator at the roses;
• turn on and turn on life;
• after about an hour (about 30 s) a notification about the start of downloading programs will appear on the screen;
• Once the acquisition is complete, please contact us as soon as possible;
• vityagti kokopchuvach;
• turn it on and turn it on.

It is necessary to show respect to those who reset the receiver to factory settings after updating the receiver.

According to the experts, the GS 8306 receiver does not reduce shortcomings, but is ideal for watching Tricolor TV channels in standard separate format and HD mode. The receiver allows you to receive all packages provided by the Tricolor TV operator: “Kinozal”, “Nichny”, “Maximum HD”, “Superoptimum”, “Optimum”. The tuner supports HDTV format, MPEG2, MPEG4 encoding. Regardless of the fact that the operator’s security software does not allow viewing the channels of other satellites and operators, the number and variety of frequencies that Tricolor TB provides, as subscribers respect, eliminates such needs.

Stable work of the largest operator of the Tricolor TB satellite television station becomes possible only after correct installation and further adjustment of components. This process can be completed independently, just read the current instructions for 2019. Looking at how to adjust the Tricolor TB Receiver on your own, you can see the positive benefits of the search for the truth and the presence of different generations of models of technical devices, the principle of operation of which can differ.

In this material we will look at:

• peculiarities of change;
• versatility of robots from different models of devices.

Forward actions and features of manual channel search

Receiver connections work identically for all types of receivers. You must first install a satellite dish with the correct official coordinates for your region, as confirmed by the operator. Install the correct connector and guide the cable to the terminal.

Classically, there are a number of connection methods:

• The high-frequency connection can be connected to an additional antenna cable;
• The low-frequency signal is received and transmitted via a classic scart-type cable.

Having connected the wiring and reconnected the stable functioning of the bath, you can print further registration and searches. If the device does not function correctly, you can try to find the necessary information on your own at the appropriate technical section of the official website or contact a service specialist . You can earn money with a cost-free number or by quickly using the functionality of the additional software security.

How to set up Tricolor TV channels independently on the GS 8306 receiver

GS 8306 is a popular model among telecommunications operator clients, capable of displaying HD images on the screen. The smart card is inserted into the adjacent slot, which expands the capabilities of the device.

Configuration is carried out in the classic way:

1. Open the "Options" menu;
2. Select the “Search” section, click on the “Manual” item;
3. Fill in the assigned field with the way to enter operating frequencies;
4. Repeat this as many times as necessary until all channels are connected to the base;
5. Save and reinstall your device.

Manual searching is positively related to the following factors:

• The brightness of the image that is broadcast is guaranteed if the satellite is installed correctly;
• The speed of receiving and transmitting data packets has been increased.

Setting up parameters yourself takes more than an hour and requires searching for additional information. The list of frequencies and other parameters are located in the technical section of the official website.

How to configure the DRS 5001 Tricolor TB receiver yourself

Although the technical characteristics of the drs 5001 are shared with other current analogues, this device still enjoys active popularity among clients. Our current release of software updates introduces the latest software capabilities, which means high level of service and individual approach to each client.

Looking at how to set up the Tricolor receiver, it means that the connection of technical equipment is identical, so we can talk about a similar principle of operation. This configuration transmits:

• registration of acceptance on the website or in a special account;
• Synchronize with a satellite and search for channels.

Registration is a mandatory duty for all clients of the telecommunications operator. To do this, you just need to enter the ID of the smart card, which is made up of a combination of 12 or 14 characters, in the appropriate field of the card panel. Additionally, indicate the reception number and specific contact information.

If everything is configured correctly, information about the technical components and specific data will be transferred to the stolen database, after which you can set up channels for daily review.

Setting up the receiver GS B520 Tricolor TB

GS B520 is a new generation of ownership, as expected by the operator. Any client of the company who has taken part in the program by replacing outdated technical components can become the owner of such a technical solution.

The main advantages of the daily attachment can be summarized as follows:

• Possibility of streaming on a mobile device;
• connection to your home Wi-Fi network for data exchange;
• new set of daily ports – USB, Ethernet, HDMI and others;
• interface for connecting storage devices with the ability to record broadcasts;
• access to “Kinozaliv”, “Igor” and other unique offers from Tricolor TB.

Preparation before use is carried out in the same way: having connected to the satellite dish, you need to register the device with the satellite base. Channel adjustment can be done either automatically or manually. By changing the parameters of the user, you can independently categorize channels and simplify access to them. Do not forget to save your changes before reinstalling the device again: incorrectly entering these data may result in a software failure.

How to set up the GS B211 Tricolor TB receiver yourself

Adjustment of the Tricolor TB receiver independently for the technical equipment model gs b211 is carried out in a similar way to the above method. This device allows you to broadcast a clear signal with the possibility of duplication on other devices. Detailed technical information and nutritional assistance can be found on the operator’s official website.

It is important to recognize today's poor people without the Internet, mobile phone and, especially, satellite TV. As much of today's digital TV is able to meet the demand, a large number of companies provide this service. However, Russians value savouriness, which is why the stench gives them the advantage of “Tricolor TB”. This new generation of digital television itself attracts the largest audience of viewers.

As subscribers of Tricolor TB, residents of Russia gain access to a variety of channels on various topics. The operator added information to provide appropriate content to both adults and children. For example, the “Children’s” package would be enough for any little one to relish the opportunity to enjoy the bright and cute cartoons, fairy tales, and educational programs. Sports fans and lovers of erotica will also be pleased - for them there are channels of this genre.

Activation of the “United” service means you can watch over 200 TV channels of musical, informational, exciting nature, as well as various films, series and much more.

However, remember that once you have connected the package, you must promptly confirm its terms. This way you will have access to all channels that you can enter before service. It's easier to earn money - you only need to choose a manual payment method. And Tricolor TB has enough of them. How to pay Tricolor?

We must first clarify the ID of the preferred owner, otherwise you will not be able to make payment without it. This number can be found in the “Status” section (select from the menu).

And now a report about payment methods:

• Holders of a bank card can pay Tricolor with a bank card(the card belongs to the partner bank of the TV provider)
• You can pay for the package at any postal or banking branch of Russia (the bank may cooperate with the operator)
• We sell special payment cards – scratch cards. All you have to do is enter the song code and your service will be continued
• One of the methods is electronic payment systems - Yandex.money, WebMoney, QIWI, etc. That is, mozhliva Tricolor payment via the Internet. You need to pay the necessary amount for the electronic gamut (the system takes a commission - insure it)
• Today there are already a lot of subscribers who need to use Internet banking to make deposits ( Tricolor payment online) - quick, easy and doesn’t require leaving the house
• Almost every small store, not to mention supermarkets, has payment terminals installed. We know the corresponding section, enter the necessary information and make preparations
• You can pay for Tricolor TB packages at Euroset, Zvyazkovoy and other connection stores
• You can transfer the required amount from your mobile phone.

Don’t forget about it if you enter it payment Tricolor, special office It will also be perfect for anyone. Kozhen prepayment pays his rakhunok for a penny (to be paid for the payment). If you need a sum, you can get it quickly this way.

If you want to always have access to all the channels you sign in before connecting to the service, do not forget to continue checking it out promptly. Otherwise, you won’t be able to marvel at your favorite shows or movies.

Firmware SPI Flash W25Q128BVFG receiver GS 8306

This article is devoted to the updated functionality of the satellite receiver GS 8306/GS 8305, intended for viewing channels of the satellite operator Tricolor TB.

Previously, we published two articles on the topics: “Operating modes of the GS 8306 receiver”; “Updating the GS 8306 firmware”, as practice has shown, not all the methods described in these articles brought the receiver to work.

We regularly need to check the power supply to turn the receiver into operation with the following symptoms:

The LED on the GS 8306 receiver is constantly lit and the receiver does not respond to remote control commands.

The reason I will become, with great confidence, she “flew” firmware GS 8306 Tricolor, which is why the GS 8306 receiver does not plug in. Automatic firmware GS 8306 Tricolor You won't be able to achieve much success using an external USB storage device.

The solution to this situation is the SPI Flash firmware, installed on the motherboard of the GS 8306 satellite receiver.

To get started repair GS 8306 Tricolor You will need a chip programmer and a soldering station. Without these devices, there is no sense in starting the work from updating the effectiveness of proper installation. Once everything is in place and under your hand and you are ready to use them, then you can start repair GS 8306 Tricolor.

We first need to ensure access to the GS 8306 motherboard, which contains the SPI Flash chip required for firmware. For this purpose, we disassemble the housing of the GS 8306 receiver, tighten the screws and nuts located on the rear and bottom panels.

By unscrewing the screws, you can remove the back panel and top cover of the GS 8306 digital set-top box. Access to the motherboard is gained.

The board itself does not need to be screwed into the base of the receiver body, as the SPI Flash microcircuits will not be removed from the board in any way.

The next stage of the upgrade will be the soldering of the microcircuits, for which we use a soldering hairdryer to warm up the area where the microcircuits are soldered to the contact tracks of the board.. After sufficient warming up, the microcircuit is removed from the board without any special effort.

Next, through the adapter for help, you need to import a working dump into the microcircuit firmware GS 8306 Tricolor: 1.1.001 or 1.2.001 (dump firmware GS 8307 Tricolor: 1.0.015) is instantly redesigned to suit the usefulness of the microcircuits themselves, otherwise they are replaced.

After that firmware GS 8306 Tricolor Once it is poured into the microcircuit, it is necessary to follow the matching marks on the microcircuit and the key on the motherboard, solder the chip in its place, visually making sure that all the legs of the microcircuit are in contact with the contact paths kami.

First, select the GS 8306 receiver, which is being converted from its application, for which we connect the satellite antenna, the living unit and the audio-video cord to the appropriate connectors.If the firmware was successfully installed and installed correctly, then sections of the GS 8306 receiver menu will appear on the TV screen.

In the receiver’s “Status” menu, it is specified that the receiver’s firmware version is the current version (at the time of the publication of the article on July 19, 2016, the current firmware version is 1.2.001). If the firmware version changes, download the remaining firmware version from official devices and use an external USB drive to update the receiver. How to earn it, you can find out from our statistics"GS 8306 firmware update" . We go back to the “status” menu and check that the firmware version has been updated to the latest one.

You can buy a receiver this year and enjoy watching your favorite TV channels.

P.S. After launching the update in automatic mode for receivers GS 8306 (8305) and GS 8307 (8308) in the spring of 2016. From a friend, a lot of power has begun to arrive at our address before the GS 8306 and GS 8307 receivers have been brought into operation, for which all stages of the firmware update have not been completed, so the receivers are not interested.

To improve the functionality of the receiver, it is necessary to flash SPI Flash microcircuits for the GS 8306 receiver or SPI Flash for the GS 8307 receiver, with a working version of the firmware following a similar scheme.

After updating the firmware or replacing microcircuits with working firmware, you can also search for alternative firmware, version 1.2.21789 for GS 8306 or 1.0.21789 for GS 8307 (in which auto-update from satellite is enabled) We install it from a USB flash drive.

If you have a daily programmer or soldering station, create repair GS 8306 Tricolor that GS 8307 You can contact our company for the addressm. Kirov, Sonyachny proezd, 8, t. 44-13-50 .

You can also get the microcircuit from us

A manufacturer of equipment for Tricolor has appeared on the company's website New security software for the GS 8306 receiver – firmware version 1.9.160.

This firmware is a small replacement for software version 1.2.001, which was already released for some reason. It is necessary to say that the firmware version 1.2.001 for the GS 8306 is the same software, so the GS 8306 started working normally and worked stably - without freezing, the picture practically did not catch the frieze, the channels were mixed up It's shvidko. With firmware 1.2.001, the GS 8306 receiver lost one problem that had not been resolved - the external 12v, 2A power supply unit could go out of order, but the problem was solved by purchasing another unit at a cost of 500-700 rubles. This problem is not as widespread in the GS 8306 model.

And the axis after several decades of successful operation is using the verified firmware, which has proven itself, forever I needed to release a new PZ - version 1.9.160.

Well, they released a new firmware and released it. After updating the software, Tricolor receivers begin to operate more stably. I hope that after updating the firmware to 1.9.160 everything will be fine.

On the website of the manufacturer of the GS 8306 model, the current characteristics of the new firmware are indicated (dazzling screenshot below):

Changes updated with the latest version of the software:

1. Current Stingray graphical interface
2. Improved stability of the receiving robot
3. Added functionality for manual channel search
4. Enhanced by the program “Tricolor TB Cinemas”

I would like to pay special attention to point No. 2 of the description of the new firmware - the stability of the receiving robot has been improved!

In practice, we encountered problems when flashing and after flashing the GS 8306 receiver to version 1.9.160

1. If you try again and confirm the downloaded firmware, you may not be successful - the firmware process freezes and acceptance is lost to the unprompted system. However, the old firmware has already been erased. That. Priymach is transformed into a target. Further updating is possible only by using flash memory chips, flashing them in the programmer and finally sealing them in the receiver. This procedure is obviously expensive.
2. Another problem with flashing is that it is very trivial. People are starting to get confused about the fact that the firmware has already been completed or the procedure is still frustrating. Having become confused and not visible, many of them are impatiently turning on the power supply and if the firmware has not yet been completed, then the program is recreated on the whole again.

Those subscribers who were lucky enough to have their receiver successfully upgraded to 1.9.160 after many years will encounter other problems in the operation of the receiver, which was previously working reliably.

1. The message “no signal” appears periodically while watching channels. After such a notification, you can go to another channel, watch it for a few minutes, turn to the channel on which the “no signal” notification appeared and continue watching the selected channel for another ten hours. Until the time of arrival, there is no signal.
2. The description of the new firmware shows that it included “the current Stingray graphical interface.” So the axis of the consumer Stingray moves beyond our subjective perceptions of the capabilities of the processor and memory of the GS 8306 receiver. This leads to the fact that the channels are now remixed much earlier than before - not the old firmware 1.2.001.
3. When channels are remixed, especially when channels of different thematic packages are remixed, actions are simply re-engaged.
4. Rust-colored image after the receiver has been turned off. Some journalists have actually come up with the problem that after the firmware all channels are shown in the horn color. If you would like, perhaps, it would be good to look at the picture in the horn color in our 21st century. The problem arises with the redesign of the food receiver.
5. The picture on other channels may freeze terribly. On our test receiver, the Match HD channel especially freezes - number 103 in the list of channels.
6. If, after updating the firmware, the receiver does not switch back to normal and continues to function in some way, then flashing it back via the USB port to stable firmware 1.2.001 will not work - blocking
7. From time to time, the receiver will re-engage itself without any action, such as re-mixing the channel
8. The audio and video tracks are periodically desynchronized.
9. From time to time, the receiver simply freezes, especially when it detects some kind of interference, for example, when channels are switched.

These, perhaps, are the main points that will be discussed with the GS 8306 receiver on the new firmware 1.9.160. And in our, again, subjective opinion, most of the overinsurance problems are associated with the fact that the hardware requirements of the GS 8306 receiver are not enough to meet all the needs of the new Stingray.

In light of all the operating problems identified with the new firmware 1.9.160, it is impossible to even imagine the increase in the stability of the robot when talking to the software developer.

Now about how to continue using the receiver on firmware 1.9.160

These are the things we have built with our power receiver GS 8306 to improve the stability of our work. This method, which pleased colleagues who encountered and dealt with the problems of firmware 1.9.160 earlier for us - to increase the stability of the signal received, it is necessary to set the frequency (lower and upper) of the local oscillator to 1 MG q higher than the standard value - 10751 MHz versus standard 107 MHz.

After the local oscillator frequency was set to 10751 MHz, the receiver stopped displaying the “no signal” message when viewing channels and began to operate more stable when viewing and remixed channels. Earning more is still important.

What else do you need to know when using the GS 8306 on firmware 1.9.160

The new firmware has changed the operating mode of the receiver. Now the receiver automatically detects which video output connects the cable to the TV. It is important that on which video output the firmware shows the connection cable on that video output, where the video signal will be sent. In this case, if two cables are connected to the receiver (HDMI and 3RCA), there may be a disconnection and it will not be possible to supply a video signal to which video output. Therefore, at one point in time, only one video cable is connected to the receiver.

Another point is that there is no light indication on the receiver. Previously, the top indicator is lit, indicating that the HDMI output of the set-top box is active, then on firmware 1.9.160 the light on the top indicator means that the receiver is in standby mode and for the first time you need to Ideal for sticking on the cob. And after turning on the receiver, it will automatically feed the video when video output is detected.

Download firmware 1.9.160 for GS 8306

If necessary, the “miracle” firmware for the GS 8306 receiver can be downloaded on the official website of the receiver’s manufacturer at the address http://gs.ru/support/manuals-and-software/gs-8306/

P.S. — After troublesome problems with mastering the new firmware for the receiver 8306 Vinyl low power:

1. It was time to write a new security program for the device, since the old one worked reliably and practically without any problems
2. If there is a new security program that will fix all the problems and fixes for version 1.9.160