Signal booster TP-LINK TL-WA850RE: prices. How to set up a drone-free space between two Wi-Fi routers? We use the router as “Repeater”. On the router with TP-Link Universal drone-free signal booster

This article will show how, by using the TP-Link TL-WA855RE droneless signal booster, you can increase the range of your home droneless Wi-Fi network.

The simplest way to connect is to simply plug in the TP-Link TL-WA855RE wireless signal booster into a 220V socket, then press the button on the front side, and then press the wps button on your home modem, then press the yuvachi dartless signal TP-Link TL -WA855RE Keep the indicator on, and if it lights up steadily, the limit will be duplicated and strengthened. If this method is not used again, this article will show you how to manually adjust it.

Note: In order to connect to the TP-Link TL-WA855RE for further reconfiguration, you must establish a local connection with it. When setting up the repeater, I used Windows 7 with the Google Chrome browser. We appreciate your respect, to enter the setup of TP-Link TL-WA855RE you need to use the IP address “ 192.168.0.254 ", or " tplinkrepeater.net.»

Krok 1

After connecting the drone-free signal booster to the computer’s mercury card, open the browser and enter 192.168.0.254 in the address line and press Enter, as shown in little 1. Far from the window that has opened, enter the offending field Alternatively, enter admin in small letters and click the Login button , .

Croc 2

Now let's go straight to the setting. The drone-free signal booster TP-Link TL-WA855RE introduces us to the possibility of quick setup, for which we select the top tab “Quick Setup”, select the region “Belarus” and select the time zone, after which we click “Next”.

After clicking on “Next”, the TP-Link TL-WA855R droneless signal will scan for available droneless tracks and then display all available ones on the screen.

Croc 3

Now you need to select your measure, you will need to expand it and enter a password. The password depends on the Wi-Fi network you want to use. After entering the password, press the “Next” button.

At this time, you can install a new access point, or better yet, remove everything from the list and avoid getting lost.

If you entered the correct password and everything was successful, then you will proceed as soon as you need to click “Save”, after which the settings will be saved.

Now we know that the setup was successful and there is no need to worry about the fact that we have completed everything correctly, for which we need to check the “I am connected...” field and click the “Finish” button.

Now you can speed up Wi-Fi in these areas of your home, where the signal was previously weak.

Note: The TP-Link TL-WA855RE droneless signal booster must be placed in the area where the signal of your droneless line begins to fade.

02/08/2020 about 15:22 (1 month ago)

Good day. To ensure a strong signal throughout the entire three-room apartment in a panel booth, combine the signal from the budget TL 740N with the help of 850 repeaters in a number of three units. However, even when connecting the first of them, you are faced with a new problem: the repeater receives a signal from the router, the indicator on the repeater consistently shows three signals, or:
1) devices do not want to independently connect to the repeater, being very close to it. The connection can only be established after wi-fi is activated on the device;
2) or after connecting to the repeater (which sometimes takes 5-10 minutes!), the result will be without access to the Internet.
Connect a repeater via a web site. I'll try it via WPS now.
—
Correction to the previous post: the availability of the Internet after connecting to the repeater was determined by the router’s connections. After reflashing, the problem went away, but, unfortunately, the problem of reconnection between the retroslator and the router disappeared. Having connected to the router, I go to the back edge of the apartment, where the retroslator is already located. The phone shows a noticeably weakened signal, but then continues to “try” for the router. Switching to the repeater is only possible after restarting the Wi-Fi phone. Plus, the signal wants to be verified by the retroslator, but the flexibility in this case practically does not increase. If the speedtest shows ~20 mb/s directly from the router, then in the living room near the repeater I expect ~10 mb/s, or even less, which is not much better for the readings without boosting the signal of 7-8 mb/s. Can you tell me what can be done to account for this sudden loss of liquidity?

02/08/2020 about 20:11 (1 month ago)

Having connected to the router, I go to the back edge of the apartment, where the retroslator is already located. The phone shows a noticeably weakened signal, but then continues to “try” for the router.

This is an absolutely normal situation. For additional help, the repeater will not be able to create a seamless border. And decisions about reconnecting from one point to another are accepted by the device. This adjustment is set by the vibrator. Therefore, the device will continue to struggle for the same access point.

Plus, the signal wants to be verified by the retroslator, but the flexibility in this case practically does not increase.

Repeaters practically cut the speed twice.

Vikorystvovat three repeaters is not the best idea. It’s better to be convinced that there is such a possibility.

Seamless Wi-Fi can only be achieved with the help of special devices that support singing protocols. You can read part of the article.

Best for everything, your Wi-Fi Mesh system is the best and most optimal solution.

For example, a router is installed in a cubicle or apartment, but a laptop, phone or tablet in a distant room has a weak signal. Due to this, the table is weak, making connections difficult at times.

Can you just connect a stronger Wi-Fi adapter to your laptop, but what about working with your phone and tablet? In this situation, an access point will help us, which supports the robot mode. repeater or else I repeat. Access point TL-WR740N If you connect Wi-Fi to your router and transmit a drone-free signal further, you can also connect to your phone, tablet, or other client device. For help with a TP-Link repeater you can Strengthen Wi-Fi signal for your devices.

Setting up an access point in Wi-Fi repeater mode

Router TP-Link Connects to a computer or laptop using an additional Vita Pair cable. The life is connected to the access point behind the help of the life block. Adjustment of the border card of guilt was issued to the producers.

After setting up the access point, you can connect the cable from the computer to the access point.

Open the Internet Explorer, Mozilla, Opera, Chrome or any other browser and enter the address 192.168.0.1 . That being said, you can marvel at the bottom of the router.

At the next window, enter the name of the koristuvach admin, password admin.

The menu is opened: No-dart mode - Setting up the no-dart mode - .

After this, a group of text fields will appear below. Press the “Search” button

In the window, click “Connection” opposite the Wifi network to which we will connect.

Select the encryption type: open or . Enter in the remaining column password for wifi network to whatever you want to connect to. And also we install channel number, the same as the Wi-Fi connection for which you want to create a WDS connection.

After this, you can save by pressing the Save button. If the wifi channel is cut from being necessary, then you will lose respect:

The channel of your access point does not match the channel of the bridged access point, do you want to change the channel to the channel of the bridged access point?

We confirm that the channel is responsible for automatically changing to the correct one.

Now I'm running out of time to tune in wifi security settings. Let's go to the menu: Dartless mode - Defense of the dartless mode. We select the type of encryption and password that is used on the router to which our TP-Link repeater is connected. Our vikorist had encryption.

Please pay attention, if you have vikoryst on your router, then in the fields Type, WEP Key Format, WEP Key, Key Type You must specify settings similar to the router before connecting to the access point. Otherwise, the TP-Link repeater does not connect to the router. Don't forget to show off correct region I have completely rebuilt your router. If the channel graph on the output router has a different number, the repeater cannot connect to the router through incorrectly specified security parameters.

After adjusting the security settings, you can save the adjustments using the Save button and re-enable them.

Verifying activation to WDS mode

You can find out that the TP-Link repeater can connect to the router in the menu Mill.

The menu and visible connection parameters are displayed. In the field Im'ya ()- the name of the wifi network may appear, the field will show the router mac that distributes the network, as well as channel number and other parameters.

Connection to Wi-Fi network with WDS

You can connect up to WDS Wi-Fi including a smartphone with Wi-Fi, a tablet or a laptop. To connect a laptop to a Wi-Fi network, in the lower right corner of the screen there is an icon for managing Wi-Fi connections. From the list, select our Wi-Fi network and press the “Connect” button.

Enter the password for connecting to the Wi-Fi network, which is set when setting up the router. After this, your laptop will connect to the Wi-Fi network.

Checking the connection of devices to the Wi-Fi repeater

After connecting any drone-free device (laptop, phone, tablet) to the Wi-Fi network, make sure that the device itself is connected to the repeater, and not to the router. For this purpose, on the access point, open the menu Drotless mode - Statistics of the droneless mode and other devices connected to the TP-Link repeater.

Since the list does not have the MAC address of your device, and the Internet works on a new one, then the device connects to the router, since at this point the signal from the router is stronger than the signal from the repeater. Place an access point far from the router and manually connect from it. If the device is unable to connect to the access point, make sure that the access point is connected to the router and that the encryption type and password are set correctly in the security settings.

Singingly, have you ever heard of such a device as a wifi repeater? The word is similar to the English “repeater”, which in translation means “repeater”, “repeater” or “booster” of a Wi-Fi signal. What's this? The very idea of ​​a drone-free network lies in the fact that the Internet does not have to be confined to one room, but spread throughout the entire apartment, office, or even garden. If you stand more in front of the dartless distribution jig, then the thickness of your fluidity will be greater. One of the devices that will ensure stable operation over long distances is a WiFi repeater - it boosts the router signal for a laptop or computer.

How does the boost of a wifi router work?

The scheme of a robotic WiFi repeater is very simple. It is clear from the beginning that in which room the signal on the laptop is weakest or completely absent. This situation can most often arise in two ways:

After we found out that it is necessary to detect a dartless wifi signal, we know the place to catch, but it’s not so good - just drop one or two on the phone. Here we put a repeater - the zone of its work is circular, which means that it will pick up a signal from the wifi router and transmit it further.

Repeated wifi models

Well, we understand that a wifi repeater, also called a repeater, serves to repeat the original signal that reaches the access point, and thereby strengthen the signal and increase the radius of the wifi network. It does not carry any other functions, so it may be located in the shadow of the most common drone-free device - a router, which, up to the point, can also be. Ale for the functions of the zone is just an unmarone, yak for an alarm clock, so in the mind offіsu, Tim more in Bilshosti Vipadkiv vikonaniyu, I will attach the charging charger, the piddlyche rosettes.

Repeating WiFi signals are produced by the same companies, which are less commonly owned by Asus, Zyxel, Tenda, D-Link, TP-Link and others. The photo below shows the TP-Link TL-WA850RE repeater model, as kindly provided by the company.

I will outline the main technical characteristics:

How to connect and configure the boost signal of a TP-Link router WiFi

You can connect and set up TP-Link wifi repeater in three ways:

1. Through automatic connection of a WPS repeater
2. WiFi for additional help from a smartphone, tablet or laptop
3. Through connections to a new computer

Automatic connection of a TP-Link WiFi repeater to the router using the WPS button

Like most current models of drone-free monitoring, the TP-Link TL-WA850RE wifi booster encourages adjustment to the signal of the main access point in automatic mode. For which router also provides such a function, the WPS (QSS) button on TP-LINK devices is responsible for its inclusion.

We press on it and a similar large button on the booster, after which we must connect wifi and start distributing it.

Setting up a WiFi repeater for a router signal from a smartphone

I prefer to control the entire process, so I don’t bother with the automatic method of setting up the repeater, but do everything manually. In order to set up the signal on your phone or tablet, you can also press the central button on the device to turn on WiFi on your smartphone and find the list of available connections with the name TP-LINK_Extender_7320BA - this is the SSID that you will flash in the device ї.

Let's connect until the next one.
Immediately after connecting, we will be transferred to the authorization page in the administration for the first installation - open at the end to enter your login and password. For this model, there is admin/admin - yours may be different, so you can rely either on the instructions or on the sticker on the bottom of the repeater - on it, check all the access data.

Setting up repeating WiFi signal from a computer or laptop via cable

This configuration option can also be configured in two ways

1. for the help of the installation disk that comes with the wifi repeater,
2. or through the web interface.

The other one is closer to me, so let’s take him as the main one for this instruction.

Also, if you don’t have a smartphone in your hand, then you connect the computer to the repeater immediately after spinning the bet - the “Ethernet” light on the device lights up.

Here we need to select “Local network connections”. Click on it with the right button and select “Power”. Here, first of all, select the item “Protocol version 4 (TCP/IPv4) > Power”.

If you already have local networks set up through your router, then write them down to a folder and save them, and for now check all the boxes for “Automatic”:

Save and go to your browser at the address http://tplinkextender.net, which we also recognized from the charming sticker on the case. The authorization page we already know will open, where you enter the login and password “admin”.

We go to the admin panel. Everything is very easy here - straight through the browser, entering the required data.
First, select an edge, after which the device begins to scan available boundaries. Once your wifi is known, select it. In addition, if you have configured security on the router to select the SSID, you can put a checkbox on “Specify the SSID and MAC address manually.” I press the “Next” button.

Next, we need to select the type of encryption for your primary network (tasks in the router administration) and enter the password for your Wi-Fi.

Here you can also select whether the repeater will clone the name of your network (SSID), or it will have its own name, which you will enter manually. In this case, the local boundary will be lost, so your main one can be called Merezha 1, and the other one will be called Merezha 2, but in essence it will be the same, and before you connected the PC to them, there will be other devices connected to the measure .

Finally, we will complete our entire configuration, after which we will close it by clicking the “Finish” button. After reactivating the wifi, repeat the distribution of the Internet from your router, thereby increasing the range of the received drone-free signal.

Also, after the current configuration, the left menu will become available, in which you can configure the repeater in more detail - change the encryption key, connect to a new DCHP server, manually set the IP address, enable MAC filtering, update the firmware, Xia statistics too.

Axis and everything is fine. Now you can set up the network on your computer, turn it to output and plug in the cable that connects to the repeater. Before speaking, as you noted, the PC will also receive the Internet using a cable from the repeater, so you can do the same in client mode, receiving the Internet via wifi and distributing it on a rotating basis to the computer. Now, at the next corner, you will have a stable reception!

Testing Internet speed via WiFi repeater

Once in the loop of the Internet from the provider to the computer, a new link appeared in the Wi-Fi view, repeating, our look was unclear, as if they had not verified us, and at least because of the fact. In other words, the speed of transmission between computers connected through this repeater decreases to the same extent as the speed when connected directly to the router.

For the test, we created three vimirs from the TP-Link TL-WA850RE repeater in the middle of the local boundary between the computer and laptop using the additional AIDA32 Network Benchmark utility.

1. The first test will be the right point in our experiment - such a “litmus paper”. We measure the fluidity of the middle of the local network without boosting the drone-free signal - the computer connects to the router by spinning the bet, the laptop to the next one, or via WiFi. In this case, for the purity of the result, there was no radioactivity from the transmission, on the screen of the mobile phone, TV or anything else, and the laptop was installed very close to the signal source.

   
   

   The axis has been achieved.

   

   Let's say - the amplitude of the flux rate is small, on average it was around 2200 kV/s (17 Mbit/s).

2. Another test is that the computer is not connected to the router by cable, and the laptop is connected via WiFi to the repeater with which we created our official SSID network, so it is impossible to confuse the signal from the main device. In this case, the power supply and the laptop were in the same place, so that they could be instructed one by one.

   
   

   Result:

   
   

   The bandwidth decreased slightly - in the average it was up to 1600 kV/s (12.5 Mbit/s). Also, there is no particular difference between the minimum and maximum values, which is also good.

3. The third test - the laptop was disconnected from the WiFi connection to the router, and the PC was connected through the booster, but they were connected with a patch cord. Tim himself is convinced that this model can act as a WiFi adapter.

   
   

   Ignorable:

   
   

   The variation between the minimum and maximum values ​​is also non-network, so that the connections remain stable, but the actual speed has become even a little lower, up to 1100 kV/s, or 8.5 Mbit/s.

4. I have decided, the fourth test is to connect both the PC and the laptop to the repeater, or the station computer with a cable, and the laptop using a wireless method.

   
   

   

   Unstable speed due to high volumetric fluctuations, average high - around 4800 KB/s = 37.5 Mbit/s.

Tips about robot wifi repeater

Let's bring the pouch. As a matter of fact, the presence of one more channel in the middle of the local boundary between two computers on a video wifi repeater still reduces the external speed, which was not a surprise for us, since the presence of any additional device, whether it is , powerline or whatever- maybe an adapter, it will fit on it. It would be surprising to see in which regime the costs would be the least.

As it turned out, the highest average speed was for these schemes (No. 4), if the computers were connected to each other through a repeater, bypassing the router - 4800 Kb/sec versus 2200, which provided WiFi without a repeater. This is entirely logical, but between them there was not that vicious “colony” at the lance, at the sight of the router, whose role in this episode was played by today’s hero. If there is a difference between the highest and lowest values ​​of a little tension, the stability is not affected.

But in this test the power supply to my ASUS RT-N10U router was reduced the most - why does it only show 2 MB per second? It turns out that in my opinion it is the weakest step - it’s good to think about this so that, as in one episode of the program, say “goodbye” to it and look at another model.

Another place for speed was achieved by scheme No. 2, in which one of the computers was connected to the router behind an additional patch cord, and our repeater distributed a signal to the laptop. Although, as we were told, I’m doing a great service to us by downloading a router, but it doesn’t add up to the overall picture, because after that we tried to use TP-LINK as an adapter (No. 3), receiving a dartless signal and sharing it on a PC - I coped with this better.

Range of wifi signal

What happens is that the repeater model has expanded the signal from the main device and strengthened WiFi. I connected it to the farthest access point in the room near the original “Brezhnevsky” triple - it turned out that I was passing through 3 plasterboard walls at a distance of about 10 meters. In this room, the Internet is not available on the iPad Air, but there are no common complaints about the drone-free module, but you can get wifi there, which is no longer available on other smartphones. Having taken it and our Extender from TP-LINK (two antennas are known). And without any problems, I could chew it all the way to the exit square. It’s good, the dots are no longer in the distance, but for our sake it’s just before the speech.

In numerical terms it appears in this way. If there was no repeater, in the far corner of the apartment the Internet speed through the router was as follows:

If we connected the signal, then the zone of the wifi signal was removed from the axis:

It is clear that the results are relevant only for my measurement - they were influenced by the characteristics of the PC's border card, the drone-free module of the laptop, the router, and the radiomagnetic situation in the room, which brought us as close as possible to a calm kdennoi. If it’s crazy to imagine the disgusting picture of the stench, you can safely use these concepts in your practice when designing your boundaries.

Well, the TL-WA850RE fulfilled its purpose perfectly, and I can recommend it to my prepayers as a viable way to expand the reception area of ​​your WiFi.

Today's drone-free routers allow you to cover large areas with a Wi-Fi signal, while commercial developers are faced with the problem of the Wi-Fi signal fading in the remote rooms of a large apartment or cottage.

Of course, you can add an additional router and expand the network. Alternatively, the TP-LINK company is promoting a cheaper and more convenient way to purchase an additional compact device, which is initially called the Range Extender.

Below is a description of your connection, setup and operation.

Robot principle

Often in our region this device is called “Wi-Fi booster”, which does not quite correctly reflect the principle of its operation, since it does not interfere with the signal, but creates an additional network connected to the main network, which is broadcast by the connection Internet via router.

Therefore, it is more correct to call these properties repeaters, repeaters or repeaters.

It turns out that a router is installed in the room, which works well, but in some remote rooms the Wi-Fi signal is weak or not at all.

For example, in the living room there is still signal, but in the bedroom the signal disappears. In this case, simply plug in the repeater and configure it for the robot. In this way, you can explore significant spaces to create great private cottages.

Instead of buying an expensive drone-free router or tightening up the antennas, you can simply install repeaters in the required rooms and the problem will be solved.

Repeatedly receives Wi-Fi from the main router and transmits it, expanding the area covered by the Wi-Fi signal.

As a result, the Wi-Fi measure is lost (the access code cannot be changed before it, as you will lose too much of the measure), which is configured in the head router, and all settings for repeating are actually completed before pressing the WPS keys terra i repeater .

To put it in simple words, if a person with a laptop connected to a drone-free router is in the hospital, and then wants to move the laptop to the bedroom, then after going to that room, the computer is in automatic mode, switch to receiving Wi-Fi from the repeater, and people - How can you continue your work on the Internet without noticing the daily changes?

You can also use any other Wi-Fi connected devices: smartphones, tablets, netbooks, etc.

Contents of delivery

Traditionally, inspection of the device is carried out according to the complete set. Vikonan packaging is in light, friendly colors. On the box, in addition to the image of the repeater, its main characteristics are displayed.

List of components that go together with the attack repeater:

1. Patch cord;
2. Instructions on paper and electronic media;
3. Warranty card.

An adapter for connecting the device to electrical protection is included in the daily kit, since the design feature of the device includes a living unit.

You can directly plug the device itself into a 220V socket or plug it in (pilot).

Description

The device supports 802.11b/g/n in the 2.4 GHz band. The device has a Qualcomm Atheros AR9341 chip. The device is compact, the actual dimensions in centimeters are: 11x6.5x7.5.

The glossy light plastic body looks laconic in any situation. In a dark device, you can easily recognize the WPS key, which is lined with light indicators around the perimeter.

The device has a 10/100 Mbps port. This allows you to connect, for example, a computer without a Wi-Fi module.

The handle with the Internet socket has been removed and the “Skidannya” key has been recessed.

Connection

The following should be given to the distributor and praised for the simplicity of the acquisition process. Setting up the TP-LINK TL-WA850RE does not cause difficulties for cob users. TP-LINK included in the box with the attachment two copies of the instructions in English and Russian, as well as duplicating their electronic versions on a CD.

If the router is equipped with the “WPS” function, all connections are made by pressing these buttons on the devices.

To join, you need to sign out the following last actions:

Note: After completing these steps, you can turn on the repeater under power supply and insert it into a socket in another room; the connection to the router will now proceed in automatic mode and the user will No additional steps are required for WPS settings.

The device saves in memory the measurements up to the previous connections.

Setting up

If the WPS key is disabled, you can use the patch cord to access the device configurator and enter the required parameters for connection.

To get to the web configurator, write “http://tplinkextender.net/” in your browser and click “Enter”. Before this method, it is possible to introduce the ability of the right panel to set individually named boundaries.

Control panel

The web configurator is not Russified, so it is impossible to believe that in the next updated program it is suitable for Russian clients. The Status tab displays the operating system, firmware modification, head gear adjustment, addresses, speed indicators and statistics.

In the WPS tab you can configure connection settings.

If the repeater is planned to be used in other ways, profiles should be adjusted completely.

It is important to speed up the connection procedure and ensure mobility.

The “Wireless” tab contains six sections, through which you can fine-tune the parameters of the droneless survey robot.

One of the sections provides information about connecting the device. Statistics on the reception and transmission of drone-less survey data are displayed here.

An example of the setup process via the web interface

As soon as the moisture panel of the caravan is visible, users can fine-tune the connection to this compact device. To open the web interface, you can use two connection methods: using an additional patch cord or via Wi-Fi.

Addresses, password and login for entering the configurator are indicated in the accompanying documentation, as well as on the body of the device itself (in the back, on the side of the plug).

After opening the main station interface, run the following:

Checking robots

Testing of stream broadcasting has revealed that the device is supported by the standards specified in the standard documentation, and the head router and, therefore, the communication service provider contribute significantly to the stability of the connection.

The shot socket can be used not only for connecting a PC, but also TV, set-top boxes, and players.

Based on the results of electrical tests, it was revealed that the compact device consumes about three watts per year.

The device supports work with all modern platforms, including mobile operating systems.

The device is equipped with the firmware “3.14.4 Build 130313 Rel.63007n”.

To verify the robot as a result of the drone-free signal, use the ZyXEL NBG-460N router. It was installed at one end of the apartment, and the repeater was at the opposite end (the space between them was at least ten meters long, causing inter-room overlaps, household appliances and furniture).

Through the control panel, the device was assigned the name of a repeater network, which is subdivided into the one transmitted by the head router. Data on speeds received and transmitted were measured using the additional service “speedtest.net”.

Two different smartphones on the iOS and Android platforms were tested.

As a result of measurements of fluidity at different distances from the device, it was shown that at a distance of ten meters there is sufficient versatility in reception and transmission, but then it sharply begins to decrease.

Behind the bags you can see on the street (at a distance of about 20 meters from the repeater) the signal has been weakened, otherwise you can get access to the world wide web in both smartphones at a distance of up to 30 m, although the speed of reception and transmission is still decreased significantly.

Skidannya nalashtuvan

There are two methods to reset the repeater settings to factory settings:

1. I pressed the "RESET" button, it was pushed out of the middle on the side;
2. I’ll set it up via the web configurator.

1 method

It is necessary to cancel the following actions:

Method 2

Following the instructions in the “Setting Up” section of this guide, go to the web configurator and complete the following steps:

A list of problems

In case of difficulties with connecting the repeater to the router or accessing the global network after the connection, most often it helps to simply move the repeater closer to the Wi-Fi signal or reset the device parameters to the factory setting she is reconnected.

The methods for resetting parameters are described in the first paragraph of the instructions “Resetting settings”.

If it is not possible to establish connections using the additional WPS key, it is recommended that you use the web interface of the device and set up the connection manually. A report on this procedure is described in the “Adjustment” section.

Problems of a technical nature are best dealt with through the company’s service center, so after repeating, you must save all supporting documents and the warranty card.