How to get a paper phone? How to distribute documents from iPhone. How to get an iPhone from a paper? Scheme, instructions How to make an iPhone 6 from cardboard

How to get food - how to get a phone number from your paper? Gadgets have long been a part of our lives, and even so, life is so necessary. Many people waste pennies in the pursuit of new products. Of course, my mother wants a fashionable iPhone 6, but not everyone can afford such a purchase. We have found a great option for you, which governs both the older and the younger generation. Let's wonder how we can get a phone from our paper and what we need for our mother.

Perhaps we might need such a toy - a phone from a paper? For us, this model of the telephone will be for the benefit of fathers who care for small children. You know that little children will always cackle with the same speeches that their fathers use to make fun of them. The child really wants to play with such a cute toy. But it’s impossible to give such an expensive iPhone 6 to a child just once in a while, otherwise it’s all going to run out for the phone. Get your little ones such a toy, and they will be amazed at you, the demonstrably “mature” Rosmov, and will not be burdened by your gadget.

This model, if carefully glued together, will be similar to the original iPhone 6. With such a speech you can play friends, relatives, known and unknown. You can come up with a lot of funny situations and pranks.

What is required for us to get a model that is similar to the original? Well, it's a great template. Try one of our templates or search for similar templates around. Our template is good because it has side and sides. Then you can get a good copy of iPhone 6.

Print one of the templates on a color printer. The paper is better to take a glossy one, but if there is no such thing, a simple sheet will do.

For robots you will need:

iPhone 6 template, laid out on paper.
Knives.
Stationery Nizh.
Line.
Olivets.
PVA glue or something else.
Creeped cardboard.
The lid of the box is inflated.

We cut the iPhone 6 template and carefully cut it with scissors. You need to cut carefully and clearly along the lines.

We have a telephone template with two sides and earbuds, on the earphones there is a designated place where there will be slits. The slots are necessary for fastening the side parts of the iPhone 6.

Next, we take the stationery bottom and carefully make slits in the appropriate places for fastening. It’s best to work with the help of the ruler. The line will be clear and even straight away. Then the ear will come out of the slot and all the sides will come together as required.

We fold the template along the lines of the folds. The axis we can already see is the iPhone body. Next, take cardboard, it’s not necessary, it’s about 6-7 mm. We place the template on the cardboard and trace the front part of the iPhone 6 with an olivian. We mark the blank of the daubed line. The axle came out first prepared. Round the edges with scissors.

We glue the two blanks together with some kind of glue and place this blank in the middle of the template.

We missed out on sealing all the edges of our phone. We insert the ear into the slot in the template and glue it in the middle. We press it with our fingers and rub it for about an hour, so that the glue is well-trimmed. Axis and a ready-made miracle phone from a paper.

Another option for the master class, but without division into the template:

All phone manufacturers want their gadgets to be thinner and more sophisticated than their competitors. Soon phones will be so thin that they can be rolled into a tube or folded like origami. For example, this version of the Origami Phone is an origami phone.

And if you want to make this phone origami from thin plastic, you can try to make this phone from a paper. To do this, you just need to transfer the little ones onto the cardboard, mark this template and mark one more detail - the central part with two podgins. We fold the phone along the inner dotted lines so that it forms a tube shape and glue the central part in the middle. Viyshov children's origami phone.

Origami stand for phone

Such a stand can easily be made from a small piece of cardboard. All you need is a line and an olive.

How can you create a prototype of the new-fangled iPhone from available tools, for example, from paper or cardboard? This type of food can fail in many situations. Often children, who look after adults, inherit everything from them. In addition, they even want to press the buttons on your phone, press the button to call someone and talk. Having given your gadget to your child, you can say goodbye to her, even the little one may inadvertently let him in, smash him, or fill him with water. Therefore, getting a child a smartphone from a paper is the best solution to make both the child happy and the technology safe.

Making a toy iPhone

To get an Apple mobile phone, you will need:

Select template

In order to prepare a template, you need to find and download the required iPhone model on the Internet. There are no options: iPhone S, 5, 6, 7. Deconstruction is best done on a glossy photo paper, but if this is the case, then deconstruction can be done on a basic paper.

Porada : If you don’t have a color printer in your desk You need to download the template to a flash drive and simply download it at a photo salon.

Depending on the template you find on the Internet, keep those you will pick up the phone. Good templates bear hundreds of similarities with the original, and also have special revisions in the original parts. As a result, in the process of folding and gluing, a perfect copy of the iPhone was obtained. Most often, iPhone distributions advertised on various sites simply need to be scaled up so that the phone is the same size as the real one.

Pokrokov's instructions

First you need to clearly trace the template using lines on the paper. It is necessary to know that it is not necessary to cut the parts (back wall, screen, side parts). Everything is seen as a single whole and then neatly folded with disappearing lines. After that, as a template for cutting, you need to place it on a clean, hard surface on a table or board. A stationery knife is used to cut thin, straight lines at the barrel valves, which will be used to secure the iPhone model together. To earn money earnestly It’s better to speed up with a ruler. Place the ruler at the bottom of the cut and run an even line along the line with a knife.

Porada: if you don’t have a stationery knife, then use a basic blade like Rapier and the like. Using scissors, it is very easy to cut long narrow openings in the basic parts of the phone model. By making the slots wider and more uneven, the new look of the phone after its collection will not be much less impressive. You need to work very carefully, you don’t need to trust this work to a child.

Robomo detail, as it will be in the middle of the iPhone. On a piece of cardboard we outline the front part of the iPhone template with a simple outline. Virizaemo, having rounded the corners, like a regular iPhone. This workpiece will make the inner side of the screen hard.

To add your paper model to your phone, you need one more blank. The material for lining the inside of the phone can be thick cardboard. For example, from the lid of a loose box. You can also use corrugated cardboard or an old unnecessary pinch for a computer mouse. We create a detail by wrapping a simple oval around the back wall of the iPhone behind the selected template. Cut with scissors and glue to the part removal from the cardboard at the next stage.

Now you need to bend the folded lines of the cut and cut template under the straight cut, thereby creating the layout of the phone. The previously removed part is glued in the middle, which tightens and adds rigidity to the “filling” made of cardboard. The barrel valves are pressed and inserted into the slot of the barrel ears. The main parts of the phone will also be coated with glue from the middle. All you have to do is rub the surfaces that are being glued a little so that the glue accumulates, and the technological toy is ready.

Toy phone for dolls

Please respectfully follow our statistics and find out how to get a phone number for dolls from your paper. In this regard, make a smartphone with your own hands It’s the same for dolls as it is for children. You just need to go smaller in size. If you respected and did not increase the scale when expanding the template of the required iPhone model, then you will get a model for grilling.

You can simplify the process of preparing a smartphone intended for baby dolls. For preparation you will need:

For the cob you need to cut 3 straight pieces from corrugated cardboard. The size of the required iPhone model can be found on the Internet. For example, if you need a 3D model of an iPhone 4, the dimensions of the rectangles will be 7.5×13.8 cm. It is necessary to round the parts and then glue them all together.

Then you need to cover the phone body with electrical tape. Then seal this end of the body with electrical tape of a different color. The most commonly used colors are white on the back and front of the phone and black on the sides.

The finishing touch will be to install a game screen on the screen. The template for the screen is cut from the front and needs to be glued to the front part of the layout. To make the screen shine as if it were clear of glass, you need to cover the screen with tape. A black marker draws a round button on the phone body in the center under the screen.

Paper stand in origami technology

Beyond inheritance, adults will not end simply with a paper phone. More fathers can continue this topic and together with their child create a stand for their paper iPhone, game headphones, a case, a charger. Making a phone stand is the easiest way. For which you need cardboard, sheep or a pen and knives. It is necessary to draw a diagram on the cardboard, behind which the cuts and lines will need to be made. Such schemes are easy to find on the Internet. More you can indulge your imagination And obviously, at the same time with the child, you will learn how to make a phone stand from your paper using the origami technique.

The modular origami phone stand is made from the absence of new storage parts (modules). From the modules you can create any three-dimensional figure, including a phone stand. The modules are folded into paper, then one module is inserted into another, if necessary, sealed with glue. It is possible to use a variety of different colors to make such an accessory original and unique.

Making a model of a realistic iPhone from a paper and a stand for a new one is an opportunity to develop a child’s creativity and have fun spending an hour with it. After reading our report, let us know how to get an iPhone 6 from a paper. Under the hour of modern technology, school age children will enjoy Vikonati is an analogue of the popular middle-aged telephone under the hour of practice lessons. Such 3D models can also be used as props in theatrical productions, to prank friends or as gifts. If the fragmented body of the mobile device can be filled with penny bills or small coins. Everything is left to the author's intention.

Respect, just TODAY!

Gadgets have long become one of the important aspects of the life of practical people, they are constantly being noticed, sometimes, and not for any direct reasons. It’s a lot of fun how to get an iPhone 6 phone from a paper, for example, for a child or just for a fun prank with friends. You can make it yourself using one of the simplest methods, literally for treating illness.

What do you need?

Such a do-it-yourself gadget is of low importance:

You can safely give it to children without fear of breakdowns, and you will often be asked to lose your phone;

Such a phone, carefully created, does not differ at all from its original, which means it can be used in the process of taking videos or in photographs as a replacement for a used expensive iPhone;

Well, of course, this is an indispensable resource for pranking friends, especially girls.

Preparing the template

Before you buy an iPhone 6 phone from a paper, find a template for it that best suits all the parameters. It’s time to make a great choice, it’s a shame here - to lie low on important details:

Dimensions may be consistent;

On a good template, there are definitely present dangers that you will happen to begin on your own;

Baby, the color and details are perfect to match the original ones, it is important to print the photo on a clear printer.

Yak zrobiti phone iPhone 6

We scan our template from the paper and begin manipulating it.

Proceed all the lines so that the flat stencil is filled with the convex shape of your new phone.
To enhance the model, add a large piece of cardboard, cut to size. You can use some kind of colored cardboard (you won’t be able to see it), or even better, use cheap plastic or plywood for these purposes. Such an important device looks more natural in hand and, therefore, will last longer.
The quality of this model is made from natural fabric, but it is important to ensure that this important detail is ensured by checking the inner part of our device, and so that the edge is smooth and can be sanded a little.
Let’s add a little more attention to one of the most important parts of the iPhone – the Home button. On the original models, a little bit of the fuse is in place, to achieve this, carefully position the inner part of our workpiece in the desired location in the shape of a small hole.
It is best to use a stationery knife; you can get more from your local school supply store.
Place cardboard of the required size and thickness or plastic strips in the middle of the stencil and connect them with additional glue.
The process of gluing the valves must be completed step by step and quickly so that there are no visible defects and all sides of the paper machine come out smooth. You can glue the paper to the inner template safely, it won’t be visible, and a clearly glued stencil will prevent the little one from crumbling and will not seal the finished appearance. It is best to apply an additional thin bead of glue over the entire surface of the front and back covers.

Important details

Having learned how to make a phone from a paper with your own hands, we proceed to the next step.

Here you will need a strip of clear thick spit or special plastic, which is used for burning photo albums and books. Place your phone on the screen and select the shape you need to cover the entire screen.
Give maximum respect to the aspect of the glued melt, which is evener and thicker, the final result will be more natural. The best option for securing parts together would be double-sided tape.
Stretch the mold well when gluing it to ensure its smoothness and excellent appearance of the finished device.

Having learned how to get an iPhone 6 phone from a paper, you can get to this cumbersome and awkward process for children, little gadget lovers will enjoy such an activity.

While more and more business owners are turning to their phones and tablets to complete everyday tasks (email, web surfing, text editing), there is one aspect that is often challenging: friendliness.

And so, how do you manage different types of files from different add-ons (a process that is not always unambiguous in iOS)? For example, you need to unzip a document from a recently updated Word on iPad. Or some directly from Google Maps. Or the side of the magazine. This is a simple way to save everything for the future.

Email.
For a friend with the "Post" programs, open the notification, press the "Report" button (the arrow is slightly bent), and then press "Druk".

Postal insert.
Its insert can be opened in the body of the sheet, and in this case it can be separated in the same way as described above.

Magazine stories.
I read a lot on the iPad, and often I end up reading articles that I want to keep out of sight. Unfortunately, these magazine programs do not have a direct function, so you will have to try a number of roundabout tricks.

First of all, there is only one side, a screenshot (at the same time pressing the home button and the life button). In this option you can open the “Photo” add-on (see below) and select “Photo”.

PDF files.
The process of another PDF may vary depending on where you are found. If, for example, by adding an email, you can follow the same method described above. If you have opened the PDF in your browser, you will not have any problems with the other method described below ("web pages").

For this purpose, look for programs from the owner's manufacturer: Brother, HP, Epson or something else. Most of them will give you more control over your photo editor. Epson iPrint, for example, allows you to choose the size and type of paper, the size of the photo, and the boundaries you want to define.

This menu can be opened by pressing an unknown-looking icon on the top left corner, right next to the back arrow. Look for the “Druk” item in the menu that appears. This is how the process looks like in Excel and PowerPoint.

Everything is different.
And, of course, various programs that demonstrate the power of power to each other: the iWork program from Apple, Evernote, iAnnotate PDF, Instapaper, Todo, and many others.

If you want more options and better support for older printers, try the PrintCentral Pro program (260 rubles). You can also manage other contacts, calendar entries, and send items copied to the clipboard.

Why might we need such a toy - a phone from a paper? For us, this model of the telephone will be for the benefit of fathers who care for small children. You know that little children will always cackle with the same speeches that their fathers use to make fun of them. The child really wants to play with such a cute toy. But it’s impossible to give such an expensive iPhone 6 to a child just once in a while, otherwise it’s all going to run out for the phone. Get your little ones such a toy, and they will be amazed at you, the demonstrably “mature” Rosmov, and will not be burdened by your gadget.

Print one of the templates on a color printer. The paper is better to take a glossy one, but if there is no such thing, a simple sheet will do.

For robots you will need:

iPhone 6 template, laid out on paper.
Knives.
Stationery Nizh.
Line.
Olivets.
PVA glue or something else.
Creeped cardboard.
The lid of the box is inflated.

We cut the iPhone 6 template and carefully cut it with scissors. You need to cut carefully and clearly along the lines.

We have a telephone template with two sides and earbuds, on the earphones there is a designated place where there will be slits. The slots are necessary for fastening the side parts of the iPhone 6.

We glue the two blanks together with some kind of glue and place this blank in the middle of the template.

Origami stand for phone

Such a stand can easily be made from a small piece of cardboard. All you need is a line and an olive.

It is important for everyone that the original printers are a thing of yesterday, who thinks that the paper on the paper has long been outdated, but if you are surprised, then it is not at all important to note that, as before, through. Moreover, stench has always occupied an important place in our everyday life.

Humanity is constantly moving away from each other. And it’s good that today’s laser and power tool don’t pile up on your work table, but it’s still here, isn’t it?

Each of us has to hand over a photograph, a document or a presentation every hour (unbelievably). Current technologies make it possible to distribute everything without a wired connection to a printer or directly from a smartphone, tablet or player.

We also know how to communicate via Wi-Fi from iOS devices to the iPad, iPhone and iPod Touch, which initially have a special function – AirPrint.

We first need to set up the printer itself (the MFP is also called a printer here), for which it is clear that your other device supports the AirPrint function. Yak? let's go to the special website http://support.apple.com/kb/ht4356 Apple support services and find the model of the device in the list of crazy devices.

DID YOU KNOW?
Miracle! Now you need to connect your iOS device and printer to one WiFi route. Of course, one of them already has connections, so you already have access to passwords. To check the connection, open the Notes program, type the text, emboss the cube with the arrow and find “Druk” in the list. The list of connected devices includes a newly connected printer. If it didn’t show up there, click on the “Printers” tab, launch a search and find the model that appears. “Druk” is pressed again and the text is transferred to the printer. The transmission speed depends on the settings of your Wi-Fi, but it won’t take much time.

DON'T YOU KNOW?

If it so happens that your printer does not support the AirPrint function, then it is especially difficult to boast. For such situations, the Fingerprint program has been created (for now it is only available for Windows computers and Macs), which works in the background and, apparently, prevents iOS devices from thinking that there is any AirPrint printer connected to them. . Next in order:

1. Download and install on your computer or laptop Fingerprint. The add-on is not cost-free - a fully functional licensed copy costs about $20 (cheaper, a newer printer), but to try it out, you can try the cost-free trial version (with respect to the test version of Finger) print mark the divisions with “watermarks”).

2. Launch Fingerprint. The shortcut after installation can be found clearly in the Windows command panel or in the Mac top menu. On the left side panel you can find a list of installed printers and select the one you need to connect your iPhone, iPad or iPod Touch. Closes at the end.

3. In any case, we remember that your computer and iOS device are connected to the same WiFi network. Installation completed.

To check the connection, open the Notes program, then press the button with the arrow and select “Druk”. The connection of the printer is subject to changes in the device selection. Since there is nothing, we click on the “Printers” tab, the search starts, we select the required name. I stamp “Druk” again and pick up the sheet from the printer tray.

IMPORTANT REMEMBRANCE: For this connection scheme to work, the computer on which the Fingerprint program is installed is responsible for turning on and connecting to the same WiFi route as your iOS device(s).

Programs to support your friends via AirPrint
The AirPrint function allows you to send almost everything that is displayed on the screen of your iPad, iPhone and iPod Touch via Wi-Fi to your friend: photos, maps, web pages and content from other programs. Here's a short list of some crazy AirPrint programs:
Google Maps- Other maps and routes.
Instapaper- other copies of online articles and blogs.
Evernote- you can customize your own notation.
Safari- access to other web site content directly from the browser.
iWork- allows you to unpack content from Keynote, Pages and Numbers add-ons.
How to Cook Everything- other recipes and shopping lists from standard iPad add-ons.

There are times when owners of tablets need to unplug. When the food is running, how can I get rid of the iPad? There are many ways. The most popular among them is the alternative technology AirPrint and others through the HP ePrint service.

How to get help with AirPrint and HP printer

AirPrint is a special feature that eliminates the need to install additional programs for other documents or images. This function is supported by a large number of printers from the most popular models. This technology makes it possible to quickly detect and automatically select the required printer for the iPad.

How to distribute via AirPrint

To use this technology for your benefit, you need to follow this procedure:

How to use an HP printer

This method is useful for those who want to print documents or images through an HP printer that does not support AirPrint technology. This option can be quickly accessed with the special HP ePrint option, which also makes it easy to use on your iPad. Progress of the offensive:

Through the activator or any printer

Activator programs for the AirPrint service were created to make it easier for Apple devices on older generation printers, as they do not support Wi-Fi on iPads.

The principle of operation of such utilities is quite simple: the device for a friend is configured to provide access to the other and then connects to Wi-Fi. The program will replace your printer data with HP data from AirPrint. A fairly popular series of activators is the AirPrint Activator program.

Through specialized programs

On the Internet you can easily find special utilities that allow you to share different data and images from your tablet without having to configure the devices for each other. For such programs you can see FingerPrint. This program can independently find printers at the same time and obtain the necessary information from the iPad without confirmation from a friend on the PC. Insurance service for corporate clients, which can support up to 25 devices at a time.

Friend at the file

If the printer is a daily printer, you can select the “Direct File” option. This method usually stagnates in these situations if it is not possible to recover the image (for example, you have run out of paper or paper). Then a special file is created in the song format, where all the parameters are saved. This method works best if a document is generated with a specific add-on, which will be available on other devices.

How to use iPad on any printer: Video

In the era of the development of BYOD and increased mobility, there are a growing number of ways to organize friends from mobile devices. It is difficult to extract a document or photo from an iPhone or iPad, but you can use both the built-in iOS functions and third-party programs that provide enhanced functionality. You can learn more about their actions below.

1.AirPrint

The company's AirPrint drone technology has made this function available to all users of Apple portable devices. AirPrint works with a wide range of current printer models that are connected to the same network as a gadget running iOS.

If the printer supports AirPrint, it will be configured automatically, otherwise, you will need to enable AirPrint in the printer settings and, especially, on the computer settings (“System settings” -> “Advanced access” » -> “Zagalni printers”) .

Some programs for iOS do not have a built-in function for each other, so the selected content needs to be exported to the program that the other supports, through the “Unlock in...” option.

2. HandyPrint add-on

If your printer does not support AirPrint technology, then no problem. Absolutely identical functionality is provided by the handyPrint add-on, which is shared with all other versions of Mac OS X, including Lion, Mountain Lion and Mavericks.

After installing and launching handyPrint, all connections and “unshared” printers will be visible on iOS devices. The only serious drawback of this program is that it requires you to own the computer on which it is installed.

3. Printer Pro add-on

If you do not have an AirPrint-enabled printer or a computer running OS X, you can install a special program directly on your iPhone or iPad. A good choice is the Printer Pro or Printer Pro for iPhone program.

Before purchasing this program, you should try a free trial version of Printer Pro Lite to get a feel for the capabilities of your printer. This version allows you to upload several document images, check the functionality of programs and calibrate the area of your choice.

The new version of Printer Pro works completely differently from AirPrint or HandyPrint. You will have to open documents directly into this program and unzip them from it. If you have Printer Pro installed on your iPhone or iPad, you can download other documents from Dropbox, PDF Reader and other programs that open them through the “Open in...” option.

Printer Pro has the ability to rotate documents, select paper size and other sides - much the same as when using a regular desktop computer.

To unlink the web page from the Safari browser, just change http to phttp in the address bar and click the Go button. After this, the page will open in Printer Pro and you won’t have to press the “Drug” button.

4. Firm vendor programs

There are also special cost-free programs for iOS, written by the printer manufacturers themselves, or by programmers from Epson, HP, and Xerox.

Program Epson iPrint automatically detect and connect to a number of printers (the list is in the description) at a local drone-free border. This program allows you to unzip a series of photos from your library, documents from cloud storage accounts Box, Dropbox, Evernote, Google Drive and Microsoft OneDrive, as well as any other documents that are imported before it through the “Open to...” option.

Epson IPRINT TO THE MAS MAH DRIVERS BRAUSTE OF THE COUNT OF THE DRAICE OF THE Web-StORNIKS, I will yell through the nyoye can grow up from the FIRMIY Online Service, Passed by the Vidilen Drukuvati through the Internet on Epson Prinators, Shoko Druk through Elektronna Schpshta.

supplement HP ePrint Enterprise The functionality is similar to Epson iPrint: it allows you to work on modern HP printers connected to a wireless network, and also works with the best services Box, Dropbox and Facebook Photos.

If you are in the USA and do not have a border printer at hand, then the ePrint program can send documents to one of 30,000 nearby global locations - UPS Store, FedEx Office, Swiss Post, etc. In addition, you can select a separate section directly from the list, and documents that are sent can be placed both on the device itself and in the “mud”. In addition, documents can be sent from an email address.

We have decided Xerox Mobile Print Two methods have been transferred to each other from the mobile device of the customer and another device: through additional electronic mail or through the additional Xerox Print Portal mobile app.

A friend can communicate via email with any mobile device, pointing to a current mobile phone with access to the Internet. Your email client can use an MFP that supports the Xerox Extensible Interface Platform (EIP). To download the necessary materials via email, you need to send an email with attached files to a special email address of the company that is registered for your mobile phone, and then withdraw it from your account Enter the confirmation code for your appointment. Then you will have to enter the confirmation code on any MFP that supports EIP technology, select the required document from the list, set the necessary parameters for your friend, and select the finished document in a separate view.

If you need a friend on devices that do not support the EIP interface, you can use the Xerox Print Portal, which will provide access to the server that is used for the mobile device in the office. The program can be downloaded freely on GooglePlay or AppStore. After registration, everything registered with the MFP system will be available to others.

5. Google Cloud Print

Another option for portable devices running iOS is to use the Google Cloud Print service, which allows any printers to be accessible via the Internet using the Google service. In this case, printers are connected directly to the “dark” and do not need to be adjusted.

In addition, this service can be used to access primary printers that are connected to laptops or desktops with Internet access. To do this, they need to register with Google Cloud Print via the Chrome browser.

For other documents, you need to go to your Google account on iOS through the Chrome browser, Google Docs, or another browser, from which documents you can download through a virtual virtual printer. Once configured, you can “share” such a printer just like any other documents in your Google Docs account.

If you don’t know how to get an iPhone from a paper, then quickly follow these simple recommendations, and in just a few minutes you’ll have a self-made device. For further help you can:

Healthy and satisfy your child’s diet;

Hit it up for home videos;

Please yourself in this episode, since you love the work of Paper’s games.

What do you need to prepare your iPhone?

How to make an iPhone from a paper, the details are clearly below, but first of all you will need the following words for successful preparation:

1) Computer (laptop) and access to the Internet.

2) Printer (with color cartridge).

3) Xerox office paper. If you have a camera, then it’s better.

4) Stationery knife, needlework knife, manicure scissors.

5) Leave the cardboard.

6) PVA glue (or better yet, use olive glue).

7) Double-sided tape.

To get the most out of how to get an iPhone from a paper, you need to quickly follow these steps:

If your employee has such a device as a paper cutter, then it’s best to quickly replace the knife with it. This is necessary to ensure that all straight edges of the template are cut neatly and evenly.

When cutting a template for an iPhone, it is better to quickly cut it with a needlework knife or

Before you start using your iPhone on paper, be aware of the generations of the gadget you need to work with, and each generation will have different settings.

The cardboard base and paper template must be kept perfectly intact so as not to deform the paper.

Where do you know how to distribute the template for iPhone?

In order to make an iPhone with your own hands from a paper and thereby obtain the most believable look, you will need to follow a number of simple steps:

1) Search for the telephone or iPhone template that suits you. For this purpose, you need to choose a device that suits you and your child and is suitable for the same purposes as facing you.

2) Print the selected template on a high-speed laser printer. It is necessary to cut out the paper template of the iPhone of the selected model on a printer with a high luminosity and use it to create the most glossy photo paper. Of course, you can use the original photocopier and the original printer, but the brightness of the image will be less realistic.

How to create and fold a template for an iPhone?

Now you have in your hands a sheet of iPhone images, what next?

1) It is necessary to carefully cut the template with scissors along the lines indicated by the application. Make sure to sculpt the front, back and side parts without cutting them, so that you will still need to connect them all at once.

2) Further along the lines you will need to fold the iPhone from the paper. To do this, you just need to bend the side edges at 90 degrees to cut the volumetric model. The valves, which are missing from the barrel parts, do not yet need to be cleaned, serve as a stench for manual gluing.

How to get a paper iPhone?

The template with a realistic screen is already ready, but how can you make an iPhone from a paper? What is needed for:

1) Take a sheet of hard cardboard and place the shape of the model behind the template in order to make the iPhone more believable, adaptable, valuable and of great value.

If you want to make your gadget inexpensive and durable, use a piece of plywood for the base.

Coming from the cardboard you are using, and the iPhone model, you need to create 2, 3 or 4 such parts, first gluing them together.

3) Take a cardboard base and place the front part of the iPhone template, and the back part below. Using a small amount of glue or vicor or olive glue, glue the paper template to the cardboard base.

4) On the paper template, the additional valves are missing, use them to glue the parts of the iPhone that are missing. For this purpose, the valve needs to be pushed under the bottom of the part and pressed together in these places.

Some ready-made templates have slots to insert flaps for easy fixation of the model.

How to beautifully decorate a finished iPhone?

In order to decorate your finished iPhone and paper, you will need:

1) Take a piece of thin plastic (a thin piece of zoshite or book cover) and trace it around your iPhone model. A scrap of such spitting material, pasted onto the finished device, will make your gadget more believable and sparkling. The spittle is thin and tough, but not even thick.

2) Verify the float that covers it exactly along the designated lines. If the coating comes out a little less - don’t get embarrassed, the spitting on your iPhone looks exactly the same.

4) Using double-sided tape, glue the material to the finished iPhone model. The fact that the spittle is shimmering is not visible to the tape.

What kinds of flowers from paper can you make with your own hands?

You can also create any kind of volumetric letters from the paper that suits you and your little ones. For example, a handset telephone of the SRSR watch or a cardboard telephone with a dial.

From such simple and easily accessible material, you can create various instructions from paper, which are the main element for successful work. For example, you can not only please yourself with a great job, but also invite your family and friends for help:

1) Garnied leaf, crushed with your own hands.

2) The leaflet, which looks like a hand-made heart, will definitely please your other half.

3) An original bouquet, cut from corrugated paper, lollipops and bright serverets.

You can also use paper and cardboard:

Favorite cartoon characters;

Layouts of budinochkas;

Toad model;

A little booth made from an original box and furniture made from plastic jars, flasks, boxes.

From a paper you can earn everything that interests your soul, smut, motherly bits of a good time and inspiration.

Categories
- Android
- Program
- iOS
- Printers
- Editors
- Play
- Smart TV
- Internet
- Gadgets
- Zalizo

Popular