How to put food on a tablet in a car Tablet in a car for navigation and multimedia: about models, mounting and how to connect. Installing a tablet in a car: how you can choose

In order to charge any portable device, such as a phone or tablet, using the 12-volt on-board battery of a car, you will need to quickly convert the DC-DC converter. It is not necessary to buy an inverter if you can assemble it yourself, for example, it has a very uncomplicated design based on 34063api microcircuits.

The microcircuit is specially designed for this purpose, and many chargers use it as the main driver in car chargers. This microcircuit itself has become the basis for most charges that are used as a cigarette lighter.

The input transfer microcircuit has an output stage, which delivers up to 3A voltage. However, it can be considered universal – it can charge almost any mobile device, including devices with removable batteries, or tablet computers.

The microcircuit provides a stable output voltage of 5 Volts. It is optimal for recharging batteries of various portable devices. The throttle consists of 20 turns of 0.6 mm thread wound on a “dumbbell”. Drops and fluctuations in on-board voltage are not dangerous for microcircuits, since the range of input voltage is 7 to 40 Volts.

The microcircuit operates stably during sudden temperature changes and weather changes, without overheating during the process. You can connect 34063api using several circuits. Here is the best option, which is so simple and easy to create.

Particularly valuable microcircuits are those that can instantly connect to multiple mobile phones. In case of charging capacity, charge all different models, no matter how loud, through the standard device. You can also turn off the input and output capacitors from the circuits, which are required to filter out transients.

22.12.2016

Nowadays, few people enjoy a multimedia system with a touch screen and a large number of options. However, car manufacturers often install such audio systems only in expensive trim levels or as an additional option, which is likely to cost a pretty penny to buyers. You can also buy such a radio in car audio stores, etc., and there, the output of such a radio is unacceptably surprising (at 400 USD and higher). Lest you get confused in advance, some of the solutions have already been found, and in this article I will tell you how to install a tablet in a car and create a clearly functional multimedia system, although not very y budget.

There are two ways to connect your tablet to your car's audio system:

1. Connection to an additional standard audio system (instead of the power supply there is a radio).
2. With the help of the new audio booster (replacement of the head unit).

To print the installation work, the following tools are required:

• A set of tools for car repair.
• Soldering iron, tin and electrical tape.
• Drill and drill bits 3-6 mm.
• Gostry Nizh.

Equipment required to install the tablet in a car:

• Tablet computer, the diagonal does not need to be more than 8 inches.
• Car audio booster (if the tablet is connected to an additional radio, booster is not required).
• Car Audio Adapter
• An adapter will help you charge your tablet.
• Conducted to connect the power supply and speakers (subwoofer).
• Heat-burning tubes.

Installing a tablet PC in a car instead of a radio.

Car speakers can be very heavy and heavy-duty, and the sound card in the tablet is only designed to supply sound to headphones or small speakers. So, in order for the tablet to produce a clear sound from the car speakers, you need an external booster. As I already guessed earlier, instead of boosting, you can use the standard radio. This method is much simpler, and the sound quality will be louder if you use this method. Therefore, today we will look at the option of connecting to an additional car audio booster. It is recommended to install the booster in the trunk, but if you want to protect the wiring and not pull it across the entire cabin, the booster can be installed under the driver or passenger seats.

To begin with, dismantle the old radio. Next, take the darts to connect the life support ( IMPORTANT: Avoid unnecessary wiring!) and stretch them from the battery to the place where the booster is installed. Always do not connect the booster before wiring the cigarette lighter or the radio, as fragments may cause a short circuit that will cause a malfunction or damage the electronics in the interior. VERY IMPORTANT: Plus, connect it through the locker, for which you need a special waterproof device. Install the yakomaga burner closer to the battery, otherwise it may become damaged, which could result in a fire.

To pass the holes from the battery into the passenger compartment, you need to drill a small hole in the partition that supports the passenger compartment from the engine compartment. If your car already has such a hole, you can pull the darts through it. Before stretching the wires, carefully insert a gum coupling or corrugated strip into the opening, this is necessary in order to protect the insulation of the wiring from rubbing with metal.

Acoustic connections

To connect the speakers to the booster, I recommend using a special adapter (as in the photo). This adapter costs a lot of money, but it really simplifies connections, eliminating the need to cut and then solder parts. In order to make it clear which wire and where to connect it, stick a small piece of painter's stitch on the wire and sign or number it.

To output sound from your tablet computer to the speaker, use a stereo RCA cable (don’t buy a Chinese cable for ten rubles, remember which is shorter, the acoustics will sound clearer). Also, in order to avoid possible code changes, it is recommended to set up an audio screen. To save time and money, it is recommended to feed the audio signal from the tablet to the booster via the headphone jack, as other methods will significantly reduce the sound quality, plus there may be interruptions and noise and under the hour of automatic transmission operation.

Connecting the tablet to 12V

To supply life to the tablet, you need to stretch the wire to the companion block. To connect, you need to know the socket that will only be active when the ignition switch is in the ACC position, and when the ignition switch is turned on, you know. You can find such a connector using an additional multimeter or indicators on a nearby block. This is necessary to ensure that the tablet does not drain the battery when the car is not in use. “Plus” is connected to the fusible block behind a special connector (pictured), “minus” is connected to the mains, before these wires the “mother” connector is connected (12V car socket), before the next one the car is connected linen adapter for charging the tablet.

We install the tablet in place of the radio

To install the tablet into a niche where the radio is installed, you will need some plastic, epoxy glue or metal plates. Try the tablet up to the frame first, you may end up sawing off a little bit. Then you need to remove the plastic pieces, you will need to open a little more in which the tablet will be installed, after which you need to secure it to the back side of the frame, vikorist and epoxy glue or later prepare the file xatori. Next, it is necessary to create a new opening of small diameter through which the ports will be inserted to connect to the tablet and audio output. To make sure the tablet doesn't fall off, fix it for help. If you don’t want to bother too much, you can install the tablet behind an additional case or a universal trim holder for tablets.

(Photo 3) Installing the tablet in the car

Basic programs for cars:

• Tasker- This addition allows you to adjust the tablet so that it adequately shuts down immediately after turning on the fire and boils after turning it on.
• TTS iVona– a program that allows you to start playing devices when your device is turned on.
• Torque Pro- This software, with the help of an OBD2 adapter, allows you to turn your tablet into a full-fledged on-board computer with the ability to diagnose the car.

There are also a lot of useful add-ons, after installing them you will be able to control navigation, find out about the traffic situation, vehicle condition and service intervals.

By installing the tablet in your car, you can listen to music, receive calls and use GPS navigation. Read which one to select and how to install correctly.

Today's car is no longer just a tool for rich drivers to move quickly from one point to another. Modern technologies allow you to create a comfortable car for difficult trips. If previously the indicator of a car’s sophistication was a CD radio and a navigator, they will now be replaced by a ready-made tablet, which allows for the possibility of a mass of devices at once. Adding a tablet to your car for navigation and multimedia looks not only useful, but also practical, but buying gadgets is also a good idea. However, reasons arise: how do you install the tablet, and how do you install it in the machine?

How can I use a tablet in a car?

The most common reason for replacing standard multimedia features in a vehicle with a tablet is the lack of functions for driving. We’ve already heard of a smartphone that contains a dozen devices, starting with an FM receiver and ending with a camera, so why not do something similar in a car?! Wait a minute, it’s not uncommon for the radio to play music from existing discs. On the other hand, on the right, there is a tablet computer with a large touch screen, with which you can enjoy music, watch movies, and play games.

The benefit of adding a tablet to your car is for multimedia capabilities, navigation and practicality. It is tightly wound, the navigator and other equipment will cost a pretty penny, and those that demonstrate this very functionality can be bought for 100-200 dollars. With this installation, there will be less pressure on the connections of the skin device.

So, why can you use a tablet in a car:

• For making music. Not a lot of people can do without this ability, and the tablet is already far from realizing it. Add your favorite compositions in different formats to your memory or memory card and listen. In addition, this tablet is equipped with Wi-Fi, which allows you to connect to any point. Well, more expensive models will support SIM cards, which makes it possible to listen to music online.
• For making films. If you often go up in price or simply spend a lot of time on the road, then this function is quite correct. It is necessary to select a tablet model from a local connection or access the speed of Wi-Fi and mobile Internet.
• For internet surfing. Even though the primary radio cannot provide access to Merezha. If you have a Wi-Fi interface or mobile Internet, you can read the latest news or articles.
• For navigation. Wireless tablets support GPS, which allows you to use them for navigation. It’s easy for the large display to manually plot the route, and the operating system allows access to up to hundreds.
• Play, program. The tablet can also handle thousands of games, which are freely available for attraction. In addition, you can practice with what you called. The system allows you to customize the interface for yourself.

Installing a tablet in a car: how you can choose

We've covered the advantages of tablet computers in the transport department, now let's move on to the installation nuances.

Select location

We first need to figure out how the tablet will be installed. You can see that there are two options:

• For further assistance, support. The simplest way to install a tablet in a car. You will have to purchase additional fasteners, a variety of different parts: for installation on the panel of accessories, to the frame, to the headrest, and so on. The method is characterized by ease of installation: install the mount, the tablet, and connect the darts. However, this type is not aesthetically pleasing and particularly reliable. The wires will ring, and if there is strong shaking, the tablet is likely to fall.
• Installed replacement radio. A more foldable method, which allows you to do everything clearly, reliably and beautifully. Here you will have to turn on the electricity for a few minutes, then estimate the size of the installation area, use some other tools for an hour. Then the result is a very reliable and even attractive design.

Which method to choose depends on water and transport conditions. It is most often recommended to replace the radio before installing the tablet. In this case, for installation in a car, it is necessary to use a unique design so that the tablet simply fits on the panel. In addition, as it was planned, the transport department would have to deal with the electrical specifications in order to avoid shortening. If you don’t know enough, then you can go to the service center, where for the assigned amount, the facists will clearly install the tablet.

If you don’t want to bother with buying wires and installation, the car does not at all offer the ability to install such multimedia accessories, then we recommend giving priority to the fasteners. Minimum expenditure, installation for treatment of illness.

Installing a tablet in a car using additional fastening

There are a lot of people who have a tablet lying around at home and don’t hesitate to spend an hour on the phone. In any case, you should go to a car supply store where the buyer offers a wide selection of different tripods for mounting multimedia devices. Here again, it’s important to take into account the place of installation: the front panel, the bench, the seat backs, the panel. Everything is very simple:

• Will the tablet be used for navigation, movies and music? Select a tripod for installation near the front part of the car: the frontal slope, the dashboard, and the interior (facing the car interior).
• Is it necessary to keep children occupied during a busy trip or just to ensure that passengers in the back can enjoy watching movies? You can attach the tablet to the back of the front seats.

As a rule, the weight is given to the front part of the car. In order for the tablet to feel safe and comfortable, we recommend using fastenings with a rigid base, which are attached to the panel using a special gasket and suction cup. It’s better if the structure doesn’t need a long base, which will prevent the carvings in the pits. Naturally, the striker mechanism is rotatable, so that the driver and passenger can comfortably adjust the position of the tablet.

Where to buy cheap?

The flexible mounting on the surface gives special attention to the suction cups, so that some people can simply not press the tablet, which will fall off at the same time as the tripod on the shakers. If there is enough space in the cabin, you can look at the options with fastenings on the wall, and then open the position so that the tablet computer does not interfere with the view of the water.

Charging a tablet in a car

Kozhen, who would like to know a little about current tablets and smartphones, knows how these gadgets are discharged. No matter what, you might end up charging the tablet once every day or two, or even more often. Constantly dragging the device home to the outlet is not an option, so the simplest solution is to charge it from the on-board side of the car.

Where to buy cheap?

When the tablet is installed behind an additional fastening, food supply is usually carried out in two ways:

• ThroughUSB- radio port of the car. Most modern radios are equipped with a USB port, which is suitable for connecting music storage devices. In our case, we will become a dzherelom tavern. The connector is connected to the original micro-USB cable, which connects the tablet to the radio. However, the voltage of the radio does not seem to be very high, so charging the high-capacity battery can take a very long time.
• Vikoristovuyuchi light a cigarette. Another tool for charging a tablet in a car is a cigarette lighter, which can be used practically in any vehicle. Which type of connection requires a special adapter that is inserted into the cigarette lighter. Similar adapters can be found in any auto supply store, and their skill, so to speak, does not bite. Then we simply connect the tablet to an additional cable.

The water connects the tablet directly to the side of the car. There is no particular sense in going into this method if you decided to install the tablet using additional mounting.

Seeing the sound

Don’t forget about the sound, which won’t happen if we just plug the tablet into the cigarette lighter. The easiest way to output sound is through the AUX cable.

The radio is connected to a 3.5 mm minijack.

Here everything is as simple as possible: we buy a cable (more expensive, in order to remove the brightest sound from the sound), we connect the tablet and the car radio. The sound, of course, is overwhelming, unless you have to pay attention to the peculiarities of the car audio system.

You can also use wireless Bluetooth or Wi-Fi interfaces to connect.

I know again both the radio and my mother’s tablet with one of the interfaces.

A greater folding method is available with an installed additional booster, which can be used separately. As a rule, you need to check in at the baggage department. Come familiarize yourself with the wiring, make sure you have a live battery (connecting it before the cigarette is not necessary - it is a problem), and also connect the speakers with an additional RCA cable. After this, the tablet must be connected to the power supply. The process does not require screens and the installation of gullies on the darts so that they do not fray.

Installing a tablet instead of a radio

For all readers, it is necessary to permanently replace the radio with a tablet. Here you will have to spend a little more time and energy. To begin with, you will have to work hard so that the result does not end up being that the tablet simply does not fit into a special frame, for any kind of installation assistance. Well, then let’s move on to this very frame:

1. the frame, if necessary, is modified: - additional openings are made to allow wires to exit for the live and sound button;
2. Then we move on to secure the life of the building. At this stage, the tablet must be connected to the locker unit. The socket is plugged, which removes the voltage when you turn the key. It’s difficult to find out by quickly asking for hints on the block of friends and using a multimeter;

It is not possible to connect to other outlets - the tablet will discharge the battery if the car is muffled. For connection, a special adapter is required.

1. We connect the tablet to the audio system, the booster is activated, which is written a little more about, or directly connected.

It is impossible to verify the usefulness of the system.

Beautiful and simply good tablets for cars

It’s hard for a lot of people to decide which tablet for navigation and multimedia will take precedence. We will help you with your choice. For a little background on the criteria to ensure respect when purchasing:

• Brand. Today it makes no sense to chase expensive representatives of the market, especially since you don’t want to get the most productive and clear tablet for your car.
• Screen The size of the diagonal depends on your particular situation and the location of the salon. Models with 7-8 inches look the most optimal. There is no special sense to be seen in small ones, but a little more respect can be gained. Allowed for the most part – FullHD, for budget reasons – HD. With special care, be sure to attach an anti-glare coating to the cover and look around, so as not to experience any discomfort when vicinating.
• Productivity, memory. Since the use of a tablet in a car does not convey any serious implications, then it is not a good idea to chase after it. The optimal amount of RAM is 2 GB. The recommended storage volume is at least 16 GB due to the possibility of expansion with memory cards.
• Navigation and Internet. Of course, a tablet for a car must support the GPS navigation system and, most importantly, GLONASS. I wouldn't mind using a SIM card to ensure access to the Internet.

It is clear that when it comes to cameras, battery capacity and other features, there is no need to take special care.

Find a number of interesting models that are perfect for use in your car.

• Onda V10. Complete the great 10.1-inch representative of the line of the Chinese company Onda. Having taken away a good FullHD display, which is a bad thing to have on the sun. One of the main features was the version of Android 7.0, which makes the tablet one of the most current on the market. It supports 4G and GPS, which is very important for a motorist. Having removed 32 GB of memory, you can store more than one hundred musical compositions and a dozen films.
• Teclast X98 Air 3G. A more compact 9.7-inch device with a separate screen of 2048×1536 pixels. It has a productive “filling” with 32 GB of memory, support for 3G and GPS. In addition, the tablet is available in a version with two operating systems (Android+Windows).
• Lenovo Tab 3 TB3-850M. Choose those who need an inexpensive tablet for navigation and music production. Equipped with a clear 8-inch display, LTE support and GPS. Having removed 16 GB of memory and the current version of Android 6.0.

Visnovok

What do we expect from the result? Any inexpensive tablet can replace a whole set of devices. Head - GPS support and the presence of a good matrix with anti-glare coatings and wide viewing angles. With plenty of water, we will probably also add mobile Internet. Installing a tablet instead of a radio or with additional fastening is not a complicated procedure, so it is unlikely that a professional will carry out the installation.

There is also more food available, so when you come to my blog, there are chargers for various gadgets in the car. For example, we already talked about this article, but with tablets and laptops, it’s not entirely clear. By the way, this is a very interesting article, I’ll try to put everything in order and why sometimes you can just burn your device.

Well, of course, from the “chargers” like a cigarette lighter for the phone, what kind of stink is there?

For phone

It is necessary to understand - in order to charge a smartphone you need a voltage of approximately 5 Volts, and a power supply of at least 0.5 Amperes, and a maximum of 2 Amperes for even larger batteries. The most universal source and output voltage is 5 Volts and 1 Ampere!

Remember this carefully. It is necessary to check the output of such a charger and read OUTPUT. This voltage will not drain your phone, and the battery will last a long time! Behind the forms, the stench is also noticeable. There are two main types:

1) With the cable already prepared, it is installed at one end of the cigarette lighter, another model of the phone and is charging. This type is dying out, but now it is universal. If it charges, let’s say SONY, then Samsung cannot be “powered up”! However, as soon as the rich companies begin to globalize, they will become the same. However, this type is not suitable for me, since it only works with small amperes, which may be contraindicated for one generator and may be contraindicated for another.

2) Universal with USB ports. Here the choice is simpler, usually two or three USB ports, in which you can connect a cable to your phone and select the required amperes. For example, I have such a charger and there are two outputs for 1 Ampere and 2.5 Ampere.

A big plus is that there are primary ports, so you can charge not only phones, but also other devices.

For tablet

Why isn't charging a phone suitable for a tablet? The food is even wider! Most tablets have a different charge. Call it 9 Volts and the same 1 - 2 Amperes at the output.

And since we have already disarmed the beast, a smartphone requires 5 Volts, if you hypothetically “arrange” the phone charger in the tablet, then the controller will simply burn out! You'll spend it on expensive repairs. Remember this - you cannot vikorize phone chargers for tablet computers.

So why bother, how to charge?

To be honest, electronics manufacturers have already given up the title of “enlargement”. The point is simple - create one universal connector - suitable for both smartphones and tablets! Then you will be able to “feed” directly from the smoker and choose the right stream.

However, there are a lot of devices that use the old non-universal plug with different characteristics. And here come two:

1) Get a charger specifically for your tablet computer.

2) Use special POWER BANK, which can be connected to all devices, including laptops. The gist of it is this: what is “alive” is like a cigarette, and the power is like nothing else. Another advantage of such a “device” is that you can live far away from the car.

Laptops

Without saying anything about the laptop - but here the situation is practically the same as with the other “contender”. Once again it is necessary to calculate the voltage and ampere. Getting ahead of myself, I’ll say that it might be 19 Volts, and about 3.5 A, that’s a lot!

So it’s problematic to recharge! Direct via POWER BANK. It is important to be aware of the outlet. Of course, special devices for laptops themselves are sold - as a cigarette lighter, or as an additional device, which is also not cheap.

About alternative batteries, I’ll say a few words again - on many Chinese sites, you can easily buy solar batteries, which are suitable for almost all gadgets. However, on the downside, there is no sun, the charge is still there, and there is a weak, trivial hour of charge. Watch my video, in the middle there is about solar batteries.