Replacing a laptop's HDD with an SSD - instructions. Repair HDD and SSD. How to replace a hard drive without replacing the OS How to change a hard drive

Create a backup copy of your data on your hard drive. If the disk you want to replace is in a working state, and you want to save some of the data on a new one, save the backup copy first. If you don't have an existing USB drive to back up your data, check out this article to learn how to back up your files online using OneDrive.

Remove a new copy of your operating system. If you are replacing the main hard drive and do not use the cloning program, you will need to install the operating system on the new drive. Buy the OS on a disk, transfer it to a flash drive, or create a new one to update the system.

• If you are vikorist Windows 10, please contact this supporter.

Replacing a hard drive (HDD) is another stage of hardware repair or upgrade, which is necessary not only for increasing free memory, but also for productivity. Replacing the hard drive is necessary because the speed of reading data from the storage device has become too high, or it is simply impossible to use it. The main parameters of this device are the spindle speed, the Cache volume. These days, the most popular interfaces for connecting hard drives are SATA and SATA II.

And also outdated IDE roses.

For a personal PC, SSD storage devices are recognized

or the primary HDD.

SSD storage devices are composed of memory chips on a flash card base, in addition to the primary ones that physically house the set of disks, including the head and the motor that wraps them. Thanks to this difference, SSD storage devices operate much faster, quieter, and do not heat up as much. It also works with USB flash drives that connect not to USB, but directly to the HDD slot in the middle of the computer. The small part is that he is significantly more expensive and less obligated. The speed of reading information from these media is a primary parameter that should not be ignored. Regardless of how much RAM is used on board the computer, the performance of the SSD or primary HDD will be strictly fixed. If the data is not readable enough, the hard drive will be fine or you will notice unnecessary information.

Replacing the HDD is one of the categories of computer assistance. The release of new video cards, processors, and motherboards will require a reduction in the size of the HDD, which will also require periodic preparation of its hardware components.

Below you can marvel at how to correctly install the hard drive.

You can watch the video below to see how to properly connect the hard drive to the system board.

Respect! In the video you can clearly see the connection between the hard drive and the system board! It is also necessary to connect the life to the life block. Find out how you can earn money

Hard drive, Like all computer warehouses, it may go wrong once and then you will need it replacement. There may be many reasons for this. Of course, I am not familiar with these matters, but there is no need for special knowledge.

In practice, any repair there will come down to simply replacing the block, which will be fine. So, so as not to run away with masters and not to lose your phone in the search of a visa master, let’s figure out how to earn it on your own.

Repair or replacement? Where to buy?

A broken disk can, in fact, be beneficial depending on the situation. Chantly, in any department they will give you something like this. However, according to the claims of the fakhivts, the Winchester still doesn’t do repairs for a long time. It’s better to buy a new one and get a replacement.

Buy the trace from a specialized computer store. There you are guaranteed to be sold an original and clear disc. The components are guaranteed.

What should we save at the time of elections?

The capacity and manufacturer of the hard drive does not matter for the motherboard and processor. Vengeance is important for a koristuvach. The greater the capacity, the more information can be accommodated.

Carefully remove the cords before they are secured. 2. It is not obov'yazkovo to remember. The cords are of different sizes and the connectors under them are varied, so that they do not get confused and do not become a problem when replacing:

Carefully unscrew the bolts on both sides that secure the disk. Boltiv call 4 to 6, how to spare. Make sure not to spend them, because it will be difficult to find them later.

Croc 4: Vitaguєmo old disk. You can throw it away, or you can lose it as a souvenir for the riddle. Everything is ready before replacing.

Installation

Lesson 5: Remove the packaging from new. Carefully insert it into place as much as possible. The sockets are located directly next to the motherboard. Screw the disk on both sides:

Lesson 6: Connect the cords to the outlets:

Lesson 7: Carefully wipe the saw in the middle of the system unit. Cleanliness has never harmed anyone, and our computer will be more useful. Get ready! To wipe, vikorist the serving meat. I drank from the motherboard and the video card, you can wave it with a penzlik with soft bristles. Pilosos is not allowed to suck!

Lesson 8: The barrel panels are added. We tighten the bolts.

Lesson 9: We add all devices to the system unit. We connect the computer.

Lesson 10: Since the hard drive is new and absolutely clean, you will have to reinstall the system. When connected, your computer will ask for installation. Insert the disk from the system and follow the instructions.

Unfortunately, if the hard drive breaks, it is practically impossible to restore the data that was saved. If you are afraid of wasting important information, add a new hard drive.

This miraculous river has the same powers as the primary (internal) disk. The computer requires an additional USB cable. The advantage of a modern hard drive is that, while trying to save your favorite movies or music, you won’t end up stuck with piles of CDs and DVDs, and buying such a large number of flash cards is unprofitable.

How to protect your hard drive from failure?

• Buy only clear accessories from local and verified manufacturers. Especially in specialized computer stores;
• Do not expose the hard disk to impacts, high temperatures or moisture;
• If you buy a disc for free, do not insert it right away, make sure to replace it. Don’t forget to lie down for a little while at room temperature;
• Do not delete programs from your hard drive that are not included in your device;
• Install a good antivirus program on your computer;
• Do not install igor on your computer;
• You shouldn't bother defragmenting your hard drive too often;
• To control the work of the disk and troubleshoot any problems, please contact us quickly. It’s really easy to attract attention on the Internet.

Yakshcho Vi dotrimuvatimetes tsikh basic minds then replacing a hard drive, you may not need it at all, but would like to get some sleep for a decent hour.

Good luck to you! See you soon on the pages of the PenserMan blog.

When replacing the HDD with an SSD, what kind of increased productivity can be achieved? This article can be verified using the Plextor M6V 256GB model. The article also provides detailed instructions on how to replace the hdd with an ssd.

Clearly good performance in reading tests, ability with laptops and Ultrabooks (6.8 mm laptops), PlexTurbo 3 technology, 3-year guarantee for uninterrupted data recording.

Minuses

• low productivity in recording tests;
• low productivity with low intensity;
• the price could have been even a little lower.

Kolis replacing hdd with ssd was greedily expensive, and only a few could afford such computer optimizations. Those hours have happily passed, because the prices on the nose have fallen to such a low level that none of the stench is insignificant, they can be afforded by fewer possible clients, as long as there is a shortage of models. Capacity 120 - 128 GB. . Models 240 - 256 GB are also becoming very popular.

Why should you replace your hard drive with an SSD?

Well, why not replace your hard drive HDD with an SSD? Replacing HDD with SSD on a computer Reduced to the operating principle of SSDs, magnetic disks are replaced here by storage media, which ensures much greater efficiency and significantly less time for accessing data. As a result, you can enjoy greater comfort when working with a computer, as well as increased use of the OS and add-ons (including games).

SSD before speech produces less electrical energy and resistance to impacts, and the additional benefit is often a smaller size and size. These features give great importance in mobile devices, since, in addition to efficiency, mobility itself is important, as well as the maximum operating hour on a rechargeable battery. So, rudely, you already know the answer to the question: what is better than hdd or ssd for laptop?

SSD carriers are not yet suitable for everyone.

At this time, there is a great shortage of solid state drives and their prices up to capacity are equal to those of hard drives, such as traditional magnetic disk drives (HDD) - which are characterized by a higher capacity and lower What kind of vartіstyu with the expansion of the GB. Also the number of records and erasing what's better than hdd, on ssd a little less. But the galus is steadily developing, so in the future, through a few rocks, you will be able to find great benefits on solid-state storage devices, or add more capacity to the lower HDD. River prices are now expected to remain lower and are expected to be on par with HDD drives.

If this is how the theory looks, it would be better to verify the price in practice using the inexpensive model Plextor M6V with a capacity of 256 GB.

Below you can see how to replace the HDD in your computer with an SSD, and you can also benefit from the proprietary technology PlexTurbo 3.0 for increased productivity. This information is intended for smaller readers, not all of them are great experts, so you don’t care about the findings of the correspondents, but you already know them What kind of disk is the best for ssd or hdd.

Test platform

Video how to replace hdd with ssd on PC

Pokrokov's instructions on how to replace hdd with ssd in a PC, as well as transfer Windows from hdd to ssd.

The smooth neck of a laptop's speed code includes a 2.5-inch hard drive with a speed of 5600 rpm. The shortest upgrade for a laptop is simply replacing its mechanical drive (HDD) with a solid state drive (SSD). The food is not trivial, but for the average student there is plenty of food. If the thought of reinstalling Windows and all your programs, and then fine-tuning them, makes you happy, don’t boast. Once you are familiar with this article, and after a year of replacing the disk, you can enjoy the positive results of the upgrade.

Checking your laptop before upgrading to an SSD

The process of upgrading a laptop to replace the hard drive with an SSD is quite simple. You will need to uninstall the HDD from your laptop and replace it with an SSD. If your laptop has a large bottom panel, then you will be spared the most. If you have an Ultrabook or the laptop does not have a large bottom panel (for example, it may be sealed), then the process of removing the hard drive will be a little more complicated. The owner of your laptop can usually tell you the correct way to replace the hard drive. Sometimes, taking out a hard drive is even more difficult, but I remember that such laptops already have an SSD drive installed. Laptops where you can’t simply remove the back panel are unlikely to fit into the lower or middle range of laptops. This is a premium rhubarb, which in most cases will not require such an upgrade.

The back cover of the laptop has been removed

To resolve problems in the process of removing the rear panel and removing the hard drive from the laptop, you do not need to turn on the power supply. Let me touch on a little theory that you might need to remove the disk.

What do we need

SSD. Well, the first thing you need is an SSD drive with the right form factor for your laptop. An SSD may be a sufficient solution if you want to clone your current HDD. I recommend choosing a disk with a capacity of 250 GB, or better yet 500 GB, since the price tag of 10,000 rubles does not count. For most people, 250 GB on a laptop can be used for all tasks. There is no need to think about what I owe you to save a special video archive or music collection. The laptop is not for anyone.

Adapter for connecting HDD/SSD to the laptop. If you want to clone your hard drive, you will need an external adapter. Who's it for:

• Adapter for SSD/HDD 2.5" for CD/DVD drive;
• External adapter adapter controller for connecting HDD/SSD hard drives and optical CD/DVD drives. USB 2.0;
• Adapter for connecting HDD/SSD SATA III to USB 3.1 ports.

Such an adapter will be useful not only for connecting an SSD and organizing the cloning process, but also for converting your current hard drive to a new drive, for example, to save a special video archive or for backup.

Small cross-like twist To remove the back cover of the laptop and remove the hard drive, and then secure the SSD.

New external hard drive(Optional). You may need a hard drive of the same volume or a larger one to save folders that will not fit on an SSD. You can save a complete backup copy of the system in case of any incident that may occur.

Prepare your HDD before cloning

We are doing a little preparation for the robot on the flow disk, the documents have not yet been released.

1. Create a new backup copy of the system. Creating a backup copy of the Windows 10 system image can be done in this way. Open the section on the ceramic panel Security system, then open the section Backup and update. It’s good to go for the order Creation of the image of the system. Make sure you save the image and go through all the steps of the master.

Creation of the image of the system

2. Moving large folders. More money for everything, your hard drive is more money than a new SSD. Therefore, large folders containing photos, videos, games, and special documents are moved to a new storage device or another location in order to try to save as much space on the disk for cloning to the SSD. I prefer to make a copy on the computer's hard drives, which is why hard drives have much more storage than on a laptop. If you do not have a computer or an adapter from an external drive, then I would like to make a copy to external drives on the Internet, such as Google Drive or .

3. Delete unnecessary files. We have nothing to do with the place to occupy the installed programs. If you can easily re-install them on the SSD of the current one, then feel free to remove them from the HDD. Large files that you no longer need, and lying there are simply the best place to delete them. The cloning operation will go smoothly. In addition, I recommend cleaning the system of unnecessary system data and time-consuming files using the costless CCleaner program.

Connectable SSD

Now we are ready to connect the SSD to the laptop for the first time to carry out the cloning process.

1. Connect the SSD to the adapter. Depending on the type of adapter, install the SSD into the body of the CD/DVD adapter or connect it to the USB-SATA adapter, and then connect it to the laptop.

Connect SSD to USB adapter

2. Initialization of SSD. If Windows, after installing the driver, does not display the new disk letter in Explorer, open the Windows Panel and run the snap-in Disk management. U equipped Disk management You must install the SSD as a new drive under your current drive. If you do not initialize, right-click on the disk and select Initialize the disk.

SSD initialization

3. Changing the size of the flow section of the disk. We will need to change the size of the streaming disk due to the fact that it is larger for the SSD. Let's bring it to the same size. U equipped Disk management Flip the first partition of your streaming disk (name it the C: drive, or the other one with Windows installed) so that its size is no larger than the size of the SSD. If this is not so, you need to squeeze him. Right-click on the operating system section and select Squeeze Tom. The flow disk compression window appears. Onslaught squeeze.

Squeeze C:

This operation allows you to change the size of the main partition so as to eliminate the space that is created on the disk as undivided space. Although it’s not worth worrying about space, during the cloning process we change the size of the partition and include the unpartitioned space in the SSD volume.

After all operations, you need to restart your laptop.

Cloning HDD - 3 ways

The time has come for the most important operation, for which we have already gone through.

Select disk cloning program.

Here we have a number of ways.

1 way

For this purpose, I use the EaseUS Todo Backup Free utility, which is cost-free for most users, has a user-friendly interface, and also optimizes migration to SSD. We select the utility and launch it. Select a button Clone, You indicate the whole disk, then follow the instructions of the master and select a copy of the hard disk on the SSD.

EaseUS Todo Backup Free

Restore the respect that you are responsible for this option Optimize for SSD under the hour of selecting the target disk. This ensures that the sectors will be verified on the SSD and improves your chances of acquiring the SSD after the cloning process.

At the next window, you can align the output disk with the SSD. As you know, EaseUs automatically adjusts the unoccupied space on the streaming disk for different disk sizes.

Starting the cloning process

Press button Proceed, and then turn off the laptop after the operation is completed.

Method 2

Since the release of Windows 7, a utility has been introduced that allows you to clone the system to a new disk. The image of the system has already been created, so I described the process of creating the image of the system. After which it is necessary to select the message Create a system update disk.

Create a system update disk

This disk is required for mastering the system update. Once the update disk is ready, we change the HDD to an SSD (this process is discussed in the next section) and download the update disk. We select an image that was created previously and indicate that we are updating the current disk. After this operation, your HDD will be copied to your SSD.

3 way

I want to create a utility that is a complete combine for the operation of copying disks and partitions - Macrium Reflect. If we can see the possibility of a cat-free version, let’s go to the official website and download the utility. If you want to get acquainted with all the capabilities of the utility, then right on the site there is a comprehensive table of versions and their capabilities.

We launch the acquisition agent and launch the acquisition WinPE component.

Agent Macrium Reflect

After installation, you can launch programs directly and create a system image or clone a disk, making sure that you have an adapter for connecting external hard drives and an additional hard drive as required. So, we clone the current disk onto a new SSD. If not, we create a disk image and update it to the SSD.

Macrium Reflect

To cancel all these operations, we need to create an update disk in the Macrium Reflect application itself. It’s even easier to get started. Select from the program menu Other Task - Create Rescue Media. There is a disk creation master in which you need to log out all operations and create a disk with WinPE on board. This disk will allow you to become obsessed with the renewal of the system in the image.

Rescue Media Wizard

Replacing HDD with SSD

1. Turn off the laptop and remove the back panel. Turn off the laptop, and then disconnect the power cable and other connected cables, including the SSD. Then unscrew the back panel of the laptop and remove it to gain access to the hard drive.

2. Unscrew the screws that secure the disk. You will need to unscrew 2 or 4 screws, first you can tighten the drive.

3. Raise the hard drive to 45 degrees and pull it out on myself.

4. In this place, install the SSD And keep your laptop in order.

Converting data from SSD

Moment of truth: Shut down your laptop. You are obliged to get excited about it more and then you will put all the space on your desktop as before before the upgrade. Moreover, all important programs must now be taken into account almost immediately.

If you have closed the death screen or the maintenance screen, select Diagnostics – Additional parameters – Vantage options. If the system does not work, it means the cloning disk is not far away, try repeating all the operations again.

Now connect your node to the archive folders created in step, and copy everything back. In this case, you will be pleasantly surprised by the speed of copying.