Windows 10 is already more than two years old and all the main programs have long been optimized for working in it. It is no less, according to the software, a set of specialized utilities or old games, which are not updated by accident and do not work correctly in new versions of Windows. Fortunately, Windows 10 has the ability to run any programs in a special mode with older versions of the system, which helps to overcome the problems of outdated software. Why don't you show me this? how to run a stupid program on Windows 10 and correct this in several ways.

How to turn off the madness mode through the power of programs

The simplest way to activate the madness mode is to set up the program with the authorities (close to the file you have created, for example. exe) or її label.

Find out the program shortcut for Windows

All shortcuts that the PZ places in the Start menu can be found in the folder C:\ProgramData\Microsoft\Windows\Start Menu\Programs. Contained program files, as well as shortcuts that are not found in the Start menu, are most often found in the programs folder. You can find it in the following directories:

• The most advanced option: C:\Program Files or else C:\Program Files (x86).
• Rare option: C:\Users\im'ya_koristuvach\AppData\Roaming.

How to turn on the suction mode

Enhancing the intensity mode through the built-in diagnostic utility

A few minutes of manual adjustment of the capacity mode is provided by the Windows utility. Eliminating problems from madness.

1. Press Win+S. Enter Vikonanny programs created for earlier versions of Windows.
2. Run the found utility.
   
3. Click on the message Dodatkovo.
   
   
4. Select item Run as administrator.
   
   
5. Click on the button Dali.
   
   
6. Find the program you need. If it is not in the list (for example, a portable add-on), select the item Not on the list And indicate the path to the file that is being added.
7. Press Dali.
   
   
8. Choose a manual or automatic method for adjusting the volume parameters. Often the automatic mode does not help to correct problems, so we recommend using the manual mode. To start, click next Program diagnostics.
   
   
9. Check the box The program worked on earlier versions of Windows, but is not installed or launched immediately and press Dali.
   
   
10. Indicate the version of the system in which the program previously worked correctly, then press Dali.
    
    
11. Click on the button Check the program, let's do a test launch.
12. Press Dali.
    
    
13. If everything is ready, select an item So, save these parameters for the program. Otherwise, use the button to speed up No, try other parameters Then set the intensity mode differently.
    
    
14. Close the troubleshooter.
    
    

In most cases, this instruction will help you run older programs on the current Microsoft operating system.

There is an enemy of a radically new operating system - which means there is only one version number, which increases by three digits in Windows 7. All installed programs are new “universal” ones, not traditional desktop ones.

For those who need traditional desktop programs, don’t complain. Don’t forget the unknown design of Windows 10 doesn’t bother you: just as the program worked in Windows 7, it will also work just as well in Windows 10.

In the middle the system is similar to Windows 7 and 8

So, on Windows 10 you can run traditional desktop programs. Internally, Windows 10 is very similar to Windows 8, and it is, in its own way, similar to Windows 7. The application security model and driver architecture have not changed radically - there is no such difference as there is between Windows XP and Windows Vista or Windows 7.

In other words, if the program runs in Windows 7 or 8, it will also run in Windows 10. So, Windows 10 has a completely new model of add-ons, and traditional desktop programs can run in parallel new “universal” add-ons.

Windows RT has no more

Microsoft has embraced the development, so you can use desktop programs on the Microsoft Surface 3, although this is not possible on the Surface 2.

16-bit programs - that's it. Be it Windows 3.1 clock programs - they will not run on 64-bit versions of Windows 10. 32-bit versions of Windows 7 stink, so if you don’t need to install 16-bit programs, install the 32-bit version of Windows 10. By the way, with Windows 7 you did the same - in 64-bit versions of the system there are 16-bits and programs didn't work. When you try to run a 16-bit program on a 64-bit version of Windows 10, you are notified that it is not supported on your computer.

How to verify the madness of programs

Microsoft has an update tool that scans the system and alerts you to any unwanted programs or devices. This is a great help with the Get Windows 10 program, which is automatically installed on all computers running Windows 7 and Windows 8.1 via Windows Update Center. Click on the program icon on the task panel and start checking the amount.

If you have important business programs or other essential programs, try checking with the retailer to see what's wrong with Windows 10. It's not to blame for the problems, as they happened in Windows 7 and 8.

Since you can’t get by without these programs, you can check out a number of updates and marvel at what they are like in other Windows 10 software. Good luck after the release of Windows 10.

Windows 10 is not compatible with many legacy Windows programs. For example, it does not include Windows Media Center, which can still be purchased for a fee for Windows 8. It is disabled, as well as the current “universal” versions of the other two. A DVD creation function has been added, but you can also install, for example, VLC Player. Recently, mini-additions to the desktop (gadgets) appeared, but it’s not so bad - they couldn’t boast about the reliable protection of these data.

Materials

Right now, when you run any program, the money manager is launched in the operating system. This service monitors the running program and is intended to detect the presence of previously known problems with the installed operating system. This mode is also useful for installing and running programs that were written for earlier versions of operating systems. The merchandising of retailers will help eliminate the impersonality of problems. Insurance coverage is important for beginners. If for any reason you come across a window that you can open, with the option to launch this add-on with special parameters, the article shows how to turn on the summation mode in Windows 10. journalists or administrators.

Description of why this service is needed from Microsoft: “Provides support for the success of programs. Keep an eye on the programs that are installed and launched on your computer, and you will see problems associated with this. If you attribute this service, then the deputy for the incompetence of the program is incorrect.”

Turn on the madness indicator

Croc 1: Press the Win+R keys and near the Open field: enter services.msc and press “Ok”.

Croc 2: By team services.msc You launch the Services window. Go to the list and find in the list “Helper service for complex programs”. Right-click on this service and select “Zupinity” from the context list. This operation allows you to stop the service until Windows is rebooted.

Press “Zupinity” to turn on the supernatural mode.

Croc 3: At any time, you will be prompted to start with notifications about trying to start this service. Since everything went well, on the contrary, the name of the service was written “Discontinued.” Tse means that it is zupinena.

Croc 4: To avoid having to restart the program, you can manually launch the program assistant. In the same window, right-click on the service and select “Run” from the list. Just like in the beginning, at the next hour the launch window may appear and everything is fine, on the contrary, the message “Exiting” will appear in the title.

To start the intelligence service, click “Start”

Krok 5: If you want to completely turn on the Windows 10 program power mode, you need to launch Power. To do this, press either the left mouse button, or press the right mouse button, select the “Power” item from the list. In the “Zagalni” tab, select the launch type “Vimknen” and click “Ok”. This will restore the service to your account and will not start after restarting. To re-enable it, open the same actions and select “Automatic” for the startup type.

The power of the service of madness - the external influence of madness

Starting the program in the medium mode manually

Croc 1: If the program you are launching does not work as required, you can try to specify in the performance parameters the mode in which you think the program or program should run. To do this, on the program or on the shortcut, press the right mouse button and select “Power.”

Croc 2: Go to the “Hardness” tab and in the “Hardness Mode” field in the list of parameters, specify the type of operating system. To look through the list, check the box “Run the program in crazy mode with:”.

Croc 3: Additionally, in this tab you can specify parameters for launching. Basically, it is possible to order programs to run as administrator once. Manually, since initial startup does not perform any functions.

Croc 1: If the manual method of entering the amount does not work or you do not know what type to enter, Windows has a utility designed for automatic mode. For the utility to select a mode, you must run the Windows program associated with the utility. To do this, right-click on the program or select “Correction of problems from confusion” from the list.

Croc 2: The program launch utility will try to identify problems with the launch.

Croc 3: Select the diagnostic mode "Select recommended parameters".

Croc 4: In the window you will automatically set parameters for launch. First, continue, run the program and check the execution by clicking on the “Check the program...” button. The program will start. After checking the feasibility, click the “Next” button.

Krok 5: If the program is running normally and the problem does not occur again, click the “So, save these settings for the program” button. The utility freezes them to run in this mode for future launches.

Whether you have any nutritional problems or concerns, you can write below the article.

With the release of Windows 10, all personal computers were divided into one category. The greatest number of them is represented by those who simply took over and renovated. It’s alive, it’s gristling, it’s drinking, and it’s not doing anything wrong. The other category is “without trying, otherwise I’ll condemn you” - those who are addicted to Windows 7, or even XP or (too much less) Windows Vista. However, there is a third group - those who need to write about how to verify the insanity of a computer with Windows 10. For the remaining group, we decided to write this small, if not boring, article.

What is needed?

Roughly speaking, be it a remarkably current computer, crazy with “ten”. If your PC is built to run Windows XP, then it will work with later versions, however, the robot in such a situation may experience more engine pain, since launching any program will be associated with a lot of trouble.

In order to ensure that the new Windows 10 will work as intended by the manufacturer, you should first check that all components of the computer are compatible with the new version.

An easy way to verify

So, how can I run the value check from Windows 10? The easiest way is to take a look at the very icon that looms on your screen and updates periodically. Ozhe, robimo like this:

1. Open the program by clicking the notification button in the lower right corner of the screen;

1. Click on the menu symbol (three small lines located in the upper left corner);

1. From the menu, select the item “Turn over your computer.”

After all these actions, a window will appear on the screen in which you can verify the suitability of all components of the computer with the new OS. If there is a problem, you will be told how to solve it.

The correct way to verify

The first way to achieve this is simple, however, there are a number of shortcomings. The main thing is that it does not affect the “real” system problems of Windows 10, but only minimal insanity. In other words, just because your computer passes the test, it does not mean that the operating system runs smoothly. Everything you can do about such a test is that there are ten on your PC will start and nothing more. If you want to check the insanity, we recommend doing it manually.

To understand how comfortable the robot will be in the new Windows, take a look at the following parts of the report.

In order for the dozen to start as desired, you can check the computer for compatibility with the following parameters:

• Not less than 1GB of RAM;
• Processor with a frequency of 1 GHz or higher;
• 20GB of free space on your hard drive.

However, if you want the work to be more comfortable, then you can add/change these steps.

• At least 2GB of RAM;
• Dual-core processor;
• 40GB on hard drive.

If your plans are working properly, then it’s better to “dance” in front of the upcoming numbers:

• 4GB RAM;
• 2 or 4-core processor, with a frequency of at least 2.4 GHz;
• Minimum 100GB on the system disk.

Of course, if you have a heavier computer, this will be a plus.

“Hybrid” way to verify

If you are not aware of the characteristics of your PC, then you can rely on the following data: the power of Windows 10 is similar to what you can get from a “Simka” or “Visimka”. Since these systems work on your PC without any problems, then there will be no “dozens” of inconveniences - their wisdom has been lost at the level of 2009, moreover, due to optimization, computers, etc. "Pidgalmovovali" under " “Simka” will be miraculously felt by the “ten”.

Replacement

Well, now you can independently check the suitability of your PC with the new OS, have you lost your opinion, why are you interested? Since the answer is not stretched across many sides, then it sounds like this: varto! The insanity of the remaining (everyone knows) OS from Microsoft is much less satisfying - any additional writing for the latest versions will miraculously be felt here. In extreme cases, once or twice you may have to worry about how to turn on the madness mode, and in most cases, Windows will do everything on its own, selecting the necessary adjustments for this purpose ї programs

How to print a validity check from Windows 10

1. Open the command row as administrator in the root of the original installation disk.
2. Enter the command

   Setup /Auto Upgrade /DynamicUpdate Disable /Compat Scanonly /NoReboot

Complete list of team row commands.

Similar to the initial update stage, you will have to manually launch setup.exe, but there will be no actual installation.

The following parameters are available:

• /Auto Automatically updates corporate versions. Key Upgrade transfer files, parameters and programs. Alternatively, you can set the key Data deprived for the transfer of tributes.
• /DynamicUpdate Disable Install the update before starting the process for a short time.
• /Compat Scanonly , checks the hardware and software parameters of the streaming system for validity from Windows 10.

We marvel at the results

The verification was launched in interactive mode. For some, the installation program will not tell you about any problems. If everything is OK, she quietly closes her head.

For the butt, a lack of free space was specially created and a certain amount of space was removed.

The installation program keeps a log and explicitly records all the errors that I make during the process of checking PCs in the organization.

How to check your organization's computer for crap

You can:

1. Place the installation files on the edge resource (not just setup.exe, at least install.wim is required)
2. Add the /Quiet parameter to the command, which overrides interactive mode
3. Read the receipt log from the saved folder in the root of the system drive:

   C:\$Windows.~BT\Sources\Panther\setuperr.log

Here are some entries from CSetupManager / CSetupHost at the very end of the file. The stench looks something like this:

0xC1900200 – detected incompatibility with Windows 10 system vimos 0xC190020E – insufficient disk space (this type is also marked with code 0xC190020F) After all procedures, you need to understand each computer carefully using the setup code, including setupact.log and setuperr.log.